Impedimetric Nanobiosensor for the Detection of SARS-CoV-2 Antigens and Antibodies.

Detection of antigens and antibodies (Abs) is of great importance in determining the infection and immunity status of the population, as they are key parameters guiding the handling of pandemics. Current point-of-care (POC) devices are a convenient option for rapid screening; however, their sensitivity requires further improvement. We present an interdigitated gold nanowire-based impedance nanobiosensor to detect COVID-19-associated antigens (receptor-binding domain of S1 protein of the SARS-CoV-2 virus) and respective Abs appearing during and after infection. The electrochemical impedance spectroscopy technique was used to assess the changes in measured impedance resulting from the binding of respective analytes to the surface of the chip. After 20 min of incubation, the sensor devices demonstrate a high sensitivity of about 57 pS·sn per concentration decade and a limit of detection (LOD) of 0.99 pg/mL for anti-SARS-CoV-2 Abs and a sensitivity of around 21 pS·sn per concentration decade and an LOD of 0.14 pg/mL for the virus antigen detection. Finally, the analysis of clinical plasma samples demonstrates the applicability of the developed platform to assist clinicians and authorities in determining the infection or immunity status of the patients.

Wafer-scale nanofabrication of telecom single-photon emitters in silicon.

A highly promising route to scale millions of qubits is to use quantum photonic integrated circuits (PICs), where deterministic photon sources, reconfigurable optical elements, and single-photon detectors are monolithically integrated on the same silicon chip. The isolation of single-photon emitters, such as the G centers and W centers, in the optical telecommunication O-band, has recently been realized in silicon. In all previous cases, however, single-photon emitters were created uncontrollably in random locations, preventing their scalability. Here, we report the controllable fabrication of single G and W centers in silicon wafers using focused ion beams (FIB) with high probability. We also implement a scalable, broad-beam implantation protocol compatible with the complementary-metal-oxide-semiconductor (CMOS) technology to fabricate single telecom emitters at desired positions on the nanoscale. Our findings unlock a clear and easily exploitable pathway for industrial-scale photonic quantum processors with technology nodes below 100 nm.

Coherent coupling of metamaterial resonators with dipole transitions of boron acceptors in Si.

We investigate the coherent coupling of metamaterial resonators with hydrogen-like boron acceptors in Si at cryogenic temperatures. When the resonance frequency of the metamaterial, chosen to be in the range 7-9 THz, superimposes the transition frequency from the ground state of the acceptor to an excited state, Rabi splitting as large as 0.4 THz is observed. The coherent coupling shows a feature of cooperative interaction, where the Rabi splitting is proportional to the square root of the density of the acceptors. Our experiments may help to open a possible route for the investigation of quantum information processes employing strong coupling of dopants in cavities.

Helium Ion Microscopy for Reduced Spin Orbit Torque Switching Currents.

Spin orbit torque driven switching is a favorable way to manipulate nanoscale magnetic objects for both memory and wireless communication devices. The critical current required to switch from one magnetic state to another depends on the geometry and the intrinsic properties of the materials used, which are difficult to control locally. Here, we demonstrate how focused helium ion beam irradiation can modulate the local magnetic anisotropy of a Co thin film at the microscopic scale. Real-time in situ characterization using the anomalous Hall effect showed up to an order of magnitude reduction of the magnetic anisotropy under irradiation, with multilevel switching demonstrated. The result is that spin-switching current densities, down to 800 kA cm-2, can be achieved on predetermined areas of the film, without the need for lithography. The ability to vary critical currents spatially has implications not only for storage elements but also neuromorphic and probabilistic computing.

Tunable Magnetic Vortex Dynamics in Ion-Implanted Permalloy Disks.

Nanoscale, low-phase-noise, tunable transmitter-receiver links are key for enabling the progress of wireless communication. We demonstrate that vortex-based spin-torque nano-oscillators, which are intrinsically low-noise devices because of their topologically protected magnetic structure, can achieve frequency tunability when submitted to local ion implantation. In the experiments presented here, the gyrotropic mode is excited with spin-polarized alternating currents and anisotropic magnetoresistance measurements yield discrete frequencies from a single device. Indeed, chromium-implanted regions of permalloy disks exhibit different saturation magnetization than neighboring, non-irradiated areas, and thus different resonance frequency, corresponding to the specific area where the core is gyrating. Our study proves that such devices can be fabricated without the need for further lithographical steps, suggesting ion irradiation can be a viable and cost-effective fabrication method for densely packed networks of oscillators.

Ion-Irradiation-Induced Cobalt/Cobalt Oxide Heterostructures: Printing 3D Interfaces.

Interfaces separating ferromagnetic (FM) layers from non-ferromagnetic layers offer unique properties due to spin-orbit coupling and symmetry breaking, yielding effects such as exchange bias, perpendicular magnetic anisotropy, spin-pumping, spin-transfer torques, and conversion between charge and spin currents and vice versa. These interfacial phenomena play crucial roles in magnetic data storage and transfer applications, which require the formation of FM nanostructures embedded in non-ferromagnetic matrices. Here, we investigate the possibility of creating such nanostructures by ion irradiation. We study the effect of lateral confinement on the ion-irradiation-induced reduction of nonmagnetic metal oxides (e.g., antiferro- or paramagnetic) to form ferromagnetic metals. Our findings are later exploited to form three-dimensional magnetic interfaces between Co, CoO, and Pt by spatial-selective irradiation of CoO/Pt multilayers. We demonstrate that the mechanical displacement of O atoms plays a crucial role in the reduction from insulating, non-ferromagnetic cobalt oxides to metallic cobalt. Metallic cobalt yields both perpendicular magnetic anisotropy in the generated Co/Pt nanostructures and, at low temperatures, exchange bias at vertical interfaces between Co and CoO. If pushed to the limit of ion-irradiation technology, this approach could, in principle, enable the creation of densely packed, atomic-scale ferromagnetic point-contact spin-torque oscillator (STO) networks or conductive channels for current-confined-path-based current perpendicular-to-plane giant magnetoresistance read heads.

Tunnel magnetoresistance angular and bias dependence enabling tuneable wireless communication.

Spin-transfer torques (STTs) can be exploited in order to manipulate the magnetic moments of nanomagnets, thus allowing for new consumer-oriented devices to be designed. Of particular interest here are tuneable radio-frequency (RF) oscillators for wireless communication. Currently, the structure that maximizes the output power is an Fe/MgO/Fe-type magnetic tunnel junction (MTJ) with a fixed layer magnetized in the plane of the layers and a free layer magnetized perpendicular to the plane. This structure allows for most of the tunnel magnetoresistance (TMR) to be converted into output power. Here, we experimentally and theoretically demonstrate that the main mechanism sustaining steady-state precession in such structures is the angular dependence of the magnetoresistance. The TMR of such devices is known to exhibit a broken-linear dependence versus the applied bias. Our results show that the TMR bias dependence effectively quenches spin-transfer-driven precession and introduces a non-monotonic frequency dependence at high applied currents. This has an impact on devices seeking to work in the 'THz gap' due to their non-trivial TMR bias dependences.

Effect of insertion layer on electrode properties in magnetic tunnel junctions with a zero-moment half-metal.

Due to its negligible spontaneous magnetization, high spin polarization and giant perpendicular magnetic anisotropy, Mn2RuxGa (MRG) is an ideal candidate as an oscillating layer in THz spin-transfer-torque nano-oscillators. Here, the effect of ultrathin Al and Ta diffusion barriers between MRG and MgO in perpendicular magnetic tunnel junctions is investigated and compared to devices with a bare MRG/MgO interface. Both the compensation temperature, Tcomp, of the electrode and the tunneling magnetoresistance (TMR) of the device are highly sensitive to the choice and thickness of the insertion layer used. High-resolution transmission electron microscopy, as well as analysis of the TMR, its bias dependence, and the resistance-area product allow us to compare the devices from a structural and electrical point of view. Al insertion leads to the formation of thicker effective barriers and gives the highest TMR, at the cost of a reduced Tcomp. Ta is the superior diffusion barrier which retains Tcomp, however, it also leads to a much lower TMR on account of the short spin diffusion length which reduces the tunneling spin polarization. The study shows that fine engineering of the Mn2RuxGa/barrier interface to improve the TMR amplitude is feasible.