Use of scanning electron microscope to evaluate the marginal fit of protocol bars obtained through benchtop or intraoral digital scanners

Aim: To evaluate the marginal fit of protocol bars milled from digital models obtained by conventional molding followed by bench scanning or digital molding with an intraoral scanner. Methods: Four morse-cone implants and the mini-pillars were installed in a 3D printed mandible model (master model). Digital models of the master model were obtained by (n=10): (Group A - Conventional) conventional (analog) molding of the master model followed by bench scanning or (Group B - Digital) molding of the master model with an intraoral scanner. All-on-four protocol bars were designed and milled from the digital models for both groups and screwed into the master model. Scanning electron microscopy (SEM) images from the distal, central, and mesial regions of each implant were obtained and the implant-protocol bar marginal fit was measured in an image software (Image J). The mean misfit of each region was analyzed by two-factor ANOVA, Tukey test, and Student's t-test (0,05 = 0.05). Results: The digital approach (B) showed higher misadaptation than the conventional approach (A, p < 0.05), regardless of the region evaluated. In group A, the central region showed higher maladjustment than the mesial region (p<0.05), however, there were no differences among regions of group B (p>0.05). Conclusion: The conventional method of acquiring digital models using the bench scanner produced bars for the All-On-Four protocol with better marginal fit than the digital models obtained with an intraoral scanner

Practice recommendations for the role of physiotherapy in the management of sleep disorders: the 2022 Brazilian Sleep Association Guidelines.

This clinical guideline supported by the Brazilian Sleep Association comprises a brief history of the development of Brazilian sleep physiotherapy, outlines the role of the physiotherapist as part of a sleep health team, and describes the clinical guidelines in respect of the management of some sleep disorders by the physiotherapist (including sleep breathing disorders, i.e., obstructive sleep apnea, central sleep apnea, upper airway resistance syndrome, hypoventilation syndromes and overlap syndrome, and pediatric sleep breathing disorders; sleep bruxism; circadian rhythms disturbances; insomnia; and Willis-Ekbom disease/periodic limb movement disorder. This clinical practice guideline reflects the state of the art at the time of publication and will be reviewed and updated as new information becomes available.

Potentially toxic elements in iron mine tailings: Effects of reducing soil pH on available concentrations of toxic elements.

Tailings from iron mining are characterized by high concentrations of iron and manganese oxides, as well as high pH values. With these characteristics, most of the potentially toxic elements (PTE) contained in the tailings are somewhat unavailable. The aim of the present study was to evaluate how a reduction in the pH of iron mine tailings may affect PTE availabilities. The tailings were collected on the banks of the Gualaxo do Norte River (Mariana, MG, Brazil), one of the main areas impacted by the rupture of the Fundão Dam (Barragem de Fundão). A completely randomized experimental design was used, including five pH values (6.4, 5.4, 4.3, 3.7, and 3.4) and five replications. The concentrations of the PTE (Ba, Cr, Cd, Co, Cu, Fe, Mn, Pb, Ni, and Zn) were determined after extraction following different methodologies: USEPA 3051A, DTPA, Mehlich-1, Mehlich-3, and distilled water. A comparison of the available concentrations of the elements in the tailings with those in a soil not impacted by tailings shows that Cr, Cd, Cu, Fe, Mn, Ni, Ba, and Co were higher in the soil impacted by the tailings. The different methods used for evaluating the availability of PTE in the tailings at various pH exhibited the following decreasing order in relation to the quantity extracted: Mehlich-3 > Mehlich-1 > DTPA > distilled water. However, regarding sensitivity to change in pH, the order was DTPA > water > Mehlich-1 > Mehlich-3. The increases in the concentrations of PTE due to the reduction in the pH of the tailings did not lead to concentrations that exceed the limits of Brazilian regulations. The DTPA extractant exhibited higher coefficients of correlation between the PTE concentrations and the pH of the tailings, proving to be suitable for use in areas affected by the deposition of iron mine tailings.

Air Evacuation of Citizens During the COVID-19 Epidemic.

BACKGROUND: The coronavirus epidemic originated in China, having its epicenter in Wuhan. This was the first place in the world to adopt social distancing measures to contain the disease on January 23rd, 2020. After the initial isolation, several countries started making diplomatic plans to evacuate and repatriate their citizens, with the permission of the Chinese authorities. Due to the high risk of exposure of the transported passengers, evacuations were conducted with preventive measures against contamination by biological agents.CASE REPORT: We report the air evacuation of 39 passengers from China to Brazil. Five passengers were transported to Poland and the remaining 34 went to Brazil, where they remained in quarantine for 14 d. The mission was triggered on February 4th, named "Operation Return to Brazil" (Operação Regresso à Pátria Amada Brasil), and conducted by military personnel of the Brazilian Air Force. The mission was accomplished in 6 days; the flight from Wuhan lasted 25 h 20 min; and, additionally, there were on-ground preparations.DISCUSSION: Only with adequate isolation and protective measures was it possible to air evacuate the potentially contaminated passengers in the initial phase of the pandemic. Specific protective equipment (Personal Protective Equipment - PPE) is mandatory for missions in which the properties of the potentially contagious biological agent are not fully known, as was the case. Due to the risk of contamination of passengers and the likely evolution of the transport into an aeromedical evacuation, protocols stating the minimum safety conditions for this kind of patient transport must be followed, with consideration for the patient as well as the crew.Gomes ED, Ronconi MABR, Santos MB, Júnior PP, Franco AZP, Haberland DF, Borges LL. Air evacuation of citizens during the COVID-19 epidemic. Aerosp Med Hum Perform 2022; 93(2):94-98.

Carga de trabalho da equipe de enfermagem neonatal e sua relação com características da clientela / Neonatal nursing team workload and its relationship with patient characteristics / Carga de trabajo del equipo de enfermería neonatal y su relación con las características del cliente

Objetivo: avaliar a carga de trabalho de enfermagem em uma unidade de internação neonatal e correlacionar com características clínicas dos pacientes. Método: estudo descritivo e transversal, com o Nursing Activities Score em uma unidade neonatal de hospital público de ensino. Foram incluídos pacientes hospitalizados por no mínimo 24 horas, no período de 60 dias. Os dados foram analisados segundo estatística descritiva e inferencial. Resultados: a amostra foi composta por 115 pacientes, com total de 1944 medidas. A média do Nursing Activities Score foi de 73%, obtendo-se média de 74% em leitos de cuidados intensivos e 64% em cuidados semi-intensivos. Conclusão: identificou-se uma alta carga de trabalho, com média de 17,5 horas de assistência a cada recém-nascido nas 24 horas, o que pode ter impacto na segurança da assistência. Peso de nascimento e idade gestacional podem representar incremento à carga de trabalho dos profissionais.

Objective: to evaluate the nursing workload at a neonatal unit and to correlate it to patient clinical characteristics. Method: this descriptive, cross-sectional study applied the Nursing Activities Score to assess nursing workload at a neonatal unit of a public teaching hospital. Patients included were those hospitalized for at least 24 hours over 60-day period. Data were analyzed using descriptive and inferential statistics. Results: the sample comprised 115 patients, yielding a total of 1944 measurements. The average Nursing Activities Score at the unit was 73%, an average of 74% for intensive care beds and 64% for semi-intensive ones. Conclusion: high workload was identified at the unit, averaging 17.5 hours of care every 24 hoursfor each newborn, which can impact the safety of care. Birth weight and gestational age may entail increased workload for nursing staff.

Objetivo: evaluar la carga de trabajo de enfermería en una unidad de hospitalización neonatal y relacionarla con las características clínicas de los pacientes. Método: se trata de un estudio descriptivo y transversal, utilizando el Nursing Activities Score en una unidad neonatal, en un hospital universitario público. Se incluyeron pacientes hospitalizados durante al menos 24 horas, dentro del período de 60 días. Se analizaron los datos según estadística descriptiva e inferencial. Resultados: la muestra se compuso de 115 pacientes, totalizando 1944 mediciones. El puntaje promedio del Nursing Activities Score fue del 73%, siendo el promedio para la unidad de cuidados intensivos del 74% y para los cuidados semi intensivos del 64%. Conclusión: se identificó una alta carga de trabajo en la unidad, con un promedio de 17.5 horas de atención a cada neonato en 24 horas, lo que puede impactar la seguridad de la atención. El peso al nacer y la edad gestacional pueden representar un aumento en la carga de trabajo de los profesionales.

Influence of conservative endodontic access and the osteoporotic bone on the restoration material adhesive behavior through finite element analysis.

Assess, using finite element analysis, the adhesive behavior of Class I restorations under physiological occlusal loads on an endodontically treated first upper premolar with conventional and conservative crown opening surrounded by alveolar bone in normal and osteoporotic conditions. For this, four virtual models were used: M1-conservative access/normal bone; M2-conventional access/normal bone; M3-conservative access/osteoporotic bone; M4-conventional access/osteoporotic bone. On enamel, under axial load, the highest peaks occurred on conventional models and, under oblique load, the highest peaks occurred on conservative opening models. The bone condition showed no influence on the adhesive behavior. On dentin, under axial load, the models showed similar behaviors, regardless of the bone condition; under oblique load, the highest incidence of forces occurred on the distal region of the palatal root canal entrance and the highest peak was observed in the conventional opening model with normal bone. Also, under oblique load, conventional opening models showed larger values on dentin for the normal bone and similar for the osteoporotic. The conclusions shows higher displacement tensile strength peaks were observed in the conventional models, which can lead to a greater risk of adhesive failure on class I restorations with this opening. Therefore, a conservative opening would be recommended to avoid opening clinical complications. The bone condition showed no significant influence on adhesive behavior, except for dentin under oblique load, where conventional models showed larger values relative to normal bone and similar to the osteoporotic bone.

Reverse torque evaluation in indexed and nonindexed abutments of Morse Taper implants in a mechanical fatigue test.

BACKGROUND: This experimental study assessed reverse torque of indexed and nonindexed (NI) abutments in Morse Taper (MT) implants in a mechanical fatigue test. MATERIALS AND METHODS: In this experimental study It was used 37 implants MT and over them installed Pilar Flex abutments (4.8 mm × 6 mm × 1.5 mm). The groups were as follows: Group A used 19 MT implants with a NI Pilar Flex abutment loaded with 32 N/cm and Group B used 18 MT implants with an indexed (IN) Pilar Flex abutment loaded with 20 N/cm. The abutments were tested according to ISO standard 14801/2007. The specimens were installed at 30° from the axial axis and underwent a 133 N load, 4 Hz frequency, and 1,000,000 cycles. Once the test was completed, the reverse torque was provided by an electronic torque meter. Data were submitted to statistical analysis using the t-test for independent samples and paired t-test. The significance level was considered P < 0.05. RESULTS: Results obtained showed that the indexed Pilar Flex abutment had a percentage of torque loss from the initial torque of 49% and the NI Pilar Flex abutment lost 14%. Paired Student's t-tests revealed that for both NI (P < 0.001) and indexed (P < 0.001) abutments, the counter torque values were significantly lower than those applied at the initial torque. CONCLUSION: According on the methodology used, the NI Pilar Flex abutment was more effective regarding the reverse torque in single-unit implant prostheses versus the indexed Pilar Flex abutment. A greater loosening in the indexed Pilar Flex abutment retaining screw was noted in the reverse torque test, and the Pilar Flex abutment failed to show good outcomes related to the cold welding effect.

The Use of Ultrasonography for Verifying Gastric Tube Placement in Newborns.

BACKGROUND: The use of gastric tubes in newborns admitted to a neonatal intensive care unit is fairly high, and there is a risk of serious complications related to this procedure. PURPOSE: Considering the need to find a method that does not involve the patient's exposure to radiation, this study aimed to evaluate the diagnostic accuracy of ultrasonography for verifying gastric tube placement in newborns. METHODS: This was a prospective, double-blind, observational study performed in a neonatal intensive care unit, in which 159 infants had gastric intubation using ultrasound examination and radiological imaging, to verify positioning. Results were analyzed in terms of diagnostic accuracy. RESULTS: The tubes were correctly positioned in 157 cases (98.7%), according to radiological images, and in 156 cases (98.1%), according to ultrasound. The sensitivity analysis was 0.98 and the positive predictive value was 0.99. It was not possible to perform a specificity analysis, as there were not enough negative cases in the sample. IMPLICATIONS FOR PRACTICE: The use of ultrasonography to identify correct positioning of gastric tubes in infants and newborns shows good sensitivity. IMPLICATIONS FOR RESEARCH: It was not possible to evaluate the ultrasonography specificity; further studies with greater samples are probably necessary, so that this objective can be achieved.Video Abstract available at https://journals.lww.com/advancesinneonatalcare/Pages/videogallery.aspx?videoId=29&autoPlay=true.

Biomechanical Behavior of an Implant System Using Polyether Ether Ketone Bar: Finite Element Analysis.

AIM AND OBJECTIVES: This study assessed, through finite element analysis, the biomechanical behavior of an implant system using the All-on-Four® technique with nickel-chromium (M1) and polyether ether ketone (PEEK) bars (M2). MATERIALS AND METHODS: Implants and components were represented in three-dimensional (3D) geometric models and submitted to three types of load: axial, oblique, and load on all teeth. The 3D models were exported to a computer-aided design-like software such as Solidworks 2016 (Dassault Systemes, Solidworks Corps, USA) for editing and Nonuniform Rational Basis Splines parametrization. RESULTS: Data were analyzed according to system's areas of action: peri-implant bone, implant, intermediates, intermediates' screws, prostheses' screws, and bars. Largest peak stress was shown in M2. CONCLUSION: PEEK is a promising material for use in dentistry; however, further studies are necessary to evaluate its performance.

Spraying pyrethroid and neonicotinoid insecticides can induce outbreaks of Panonychus citri (Trombidiformes: Tetranychidae) in citrus groves.

Panonychus citri (McGregor) (Trombidiformes: Tetranychidae) is one of the main defoliator mites in citrus groves. In Brazil, P. citri was formerly considered a secondary pest, but in recent years, the population levels of this mite have increased in many groves, requiring additional acaricide applications for its control. The population growth of P. citri is associated with the increase in the number of applications of pyrethroid and neonicotinoid insecticides to control insect citrus pests. This study assessed the effects of pyrethroid (deltamethrin, esfenvalerate, λ-cyhalothrin) and neonicotinoid (imidacloprid and thiamethoxam) insecticides on biological, behavioral and demographic parameters of P. citri. None of the insecticides tested affected larval hatching, but deltamethrin, esfenvalerate, and λ-cyhalothrin reduced the survival of larvae and protonymphs. Deltamethrin, esfenvalerate, and λ-cyhalothrin induced a significant increase in the fecundity of surviving females. Pyrethroids also caused repellency and changed feeding and oviposition preferences. In contrast, imidacloprid and thiamethoxam did not affect the survival of immature stages, but imidacloprid significantly increased fecundity. Imidacloprid and thiamethoxam did not cause any repellent effect or changes in the feeding and oviposition preferences. Based on the demographic parameters, deltamethrin, λ-cyhalothrin, and imidacloprid increased Ro, r, and λ, whereas esfenvalerate and thiamethoxam were similar to the control. Therefore, the use of these insecticides (especially deltamethrin, λ-cyhalothrin, and imidacloprid) requires caution, such as avoiding repeated use of these compounds during the periods of P. citri incidence in citrus groves.

Susceptibility of Euseius concordis (Mesostigmata: Phytoseiidae) to pesticides used in citrus production systems.

Euseius concordis (Chant) is an important predatory mite found in citrus orchards. The toxicity of 19 pesticides used in citrus orchards on biological and population parameters of this mite was assessed. Our results indicated that formetanate hydrochloride, dimethoate and phosmet were highly harmful (100% mortality) to E. concordis. Carbosulfan, diflubenzuron, fenpropathrin, gamma-cyhalothrin, imidacloprid, lambda-cyhalothrin, lambda-cyhalothrin + thiamethoxam, mineral and vegetable oils, spinosad and thiamethoxam reduced the female's survival and/or fecundity, and were moderately harmful to E. concordis. Besides the acute toxicity, carbosulfan and formetanate hydrochloride were highly persistent [>30 days after spraying (DAS)]; dimethoate was moderately persistent (16-30 DAS); spinosad, gamma-cyhalothrin, lambda-cyhalothrin and lambda-cyhalothrin + thiamethoxam were slightly persistent (5-15 DAS); and the other pesticides were considered to be short-lived (<5 DAS). All compounds except lambda-cyhalothrin and thiamethoxam increased the pre-oviposition period in the female offspring. Carbosulfan, deltamethrin, diflubenzuron, etofenprox, fenpropathrin, gamma-cyhalothrin, mineral and vegetable oils, pyriproxyfen and tebufenozide reduced offspring fecundity, whereas thiamethoxam increased the fecundity. Mineral and vegetable oils reduced female longevity of the predator mite. Regarding population effects, imidacloprid, lambda-cyhalothrin, lambda-cyhalothrin + thiamethoxam and thiamethoxam led to an increase in net reproductive rate (R o ), intrinsic rate of increase (r), and finite rate of increase (λ) of E. concordis. Diflubenzuron, etofenprox, and mineral and vegetable oils reduced R o , r and λ. All pesticides except beta-cypermethrin, fenpropathrin and imidacloprid reduced the mean generation time (T) of the predator. Therefore, semi-field and field studies are needed to assess the compatibility of these compounds with E. concordis before adoption in IPM programs.

Sublethal effects of pyrethroid and neonicotinoid insecticides on Iphiseiodes zuluagai Denmark and Muma (Mesostigmata: Phytoseiidae).

The predator mite Iphiseiodes zuluagai Denmark & Muma is an important biological-control agent of mite pests, and it is one of the most common species found in citrus orchards. This study assessed, under laboratory conditions, the toxicity and duration of the harmful effects of five insecticides, the three pyrethroids deltamethrin, esfenvalerate and lambda-cyhalothrin, and the two neonicotinoids imidacloprid and thiamethoxam on I. zuluagai. Furthermore, we estimated the life-table parameters of the predator. Our results showed that deltamethrin and lambda-cyhalothrin caused higher mortality of larvae and adults than imidacloprid and thiamethoxam. In contrast, esfenvalerate provided larval mortality similar to imidacloprid and thiamethoxam, but it did not cause significant adult mortality of the predator. Mites that developed on pyrethroid residues showed lower survival of the immature stages, fecundity, and longevity compared to neonicotinoid residues and the control treatment. The estimated life-table parameters indicated that deltamethrin, lambda-cyhalothrin and esfenvalerate caused greater reduction in R o and r of I. zuluagai compared with imidacloprid and thiamethoxam, which were similar to the control treatment. Besides the impacts on biological and population parameters, the duration of the harmful activity of pyrethroid insecticides was longer than the neonicotinoids. Therefore, the use of pyrethroid insecticides to control pest insects may involve serious implications for integrated pest-management programs that aim to exploit the biological control by I. zuluagai in citrus orchards.

Influência dos diferentes tempos de vazamento na variação dimensional de modelos de gesso / Influence of different leakage times in dimensional variation of plaster models

A variedade de materiais de moldagem, bem como o tempo decorrido entre o ato da moldagem e o vazamento do molde podem ser causas de alterações dimensionais nos modelos de trabalho e também falhas na fidelidade de cópia dos preparos protéticos. Objetivo: avaliar in vitro a variação dimensional de modelos de gesso vazados em diferentes tempos, produzidos por 4 materiais de moldagem. Materiais e métodos: os materiais de moldagem foram divididos em 4 grupos: (A) experimentais, sendo A1 e A2 Silicones de Condensação, A3 e A4 Silicones de Adição, os quais reproduziram uma matriz multifuncional. foram obtidos 48 modelos (n=192) pela técnica de moldagem única e vazados nos seguintes tempos 1, 4, 24 e 72 horas com gesso tipo IV. As medidas dos modelos de gesso foram obtidas utilizando-se scanner digital (3Shape, Compass, Brasil). Resultados: Nenhum dos materiais utilizados apresentou variação dimensional estatisticamente significativa (p>0,005) em quaisquer um dos tempos de vazamento. Conclusão: De acordo com a metodologia empregada, o tempo de vazamento não teve influência na variação dimensional observada, nem nos Silicones de Condensação, nem nos Silicones de Adição.

The variety of materials that can be used for dental impression, as well as the time spent between the dental impressions molding and pouring may be responsible for defects such as dimensional discrepancies observed on master casts and also lack of fidelity on the prosthetic work copies. Aim: Evaluate, in vitro, dimensional variation of cast models at different pouring times, considering (4) different impression materials. Materials and methods: The impression materials were divided into 4 groups; (A) experimental, with A1 and A2 condensation silicones, A3 and A4 addition silicones which reproduced a multifunctional matrix. forty-eight models were obtained (n=192) by one step impression technique and poured at the following times 1, 4, 24 and 72 hours with plaster type IV. The plaster models measurements were obtained using digital scanner (3Shape, Compass, Belo horizonte, Minas Gerais, Brazil). Conclusion: According to the used methodology, the molding OU pouring time did not have influence in the dimensional variation observed, neither on condensation silicones nor in addition silicones.

Avaliação da resistência flexural em diferentes métodos de soldagem / Evaluation of flexural resistance in different welding methods

O objetivo do presente estudo foi avaliar três diferentes tipos de soldagem: Chama Direta a maçarico (convencional\brasagem), Solda Mista representada por fixação de dois pontos (Solda Elétrica Fixator - Kernit, Brasil), e completada com solda convencional, e o método de Solda a Laser (Soldadora Desktop - Sisma LM 500, Itália). Dois implantes plataforma Bränemark 4.1 mm (Neodent, Curitiba/Brasil) foram fixados em uma matriz de alumínio para simular uma ponte fixa implanto-suportada de três elementos. Os espécimes foram obtidos a partir de um bloco de cera CAD-CAM (Ceramill-Amammgirrbarch). Trinta e duas UCLAs hexágono externo foram fresadas e posteriormente unidas a uma barra pré-fabricada em cera com 2,5mm. Os corpos de prova foram fundidos em liga de cobalto-cromo simulando uma prótese fixa de três elementos. Esses espécimes foram divididos aleatoriamente e separados em três grupos (n=6): grupo A (solda chama direta), grupo B (solda mista), grupo C (solda laser). Os espécimes foram seccionados ao meio e unidos com resina acrílica para simular uma soldagem em prótese fixa. Os corpos foram soldados e tratados de acordo com a proposição. Após a soldagem os corpos de prova foram usinados e levados ao teste de flexão na técnica de três pontos. Os dados foram submetidos aos testes estatísticos de Tukey. Os cálculos estatísticos foram conduzidos adotando-se o nível de significância de 5% (α = 0,05). Houve diferença estatisticamente significativa entre os grupos soldados. Os resultados demonstraram valores mais elevados nos grupos A e B, solda convencional e solda mista, e menor valor no grupo C, solda a laser. No entanto, considerando a metodologia aplicada, a solda a laser mostrou uma menor resistência flexural comparada à soldagem convencional e mista, e a fixação prévia de solda elétrica com complemento de solda convencional (solda mista) não alterou a resistência flexural, produzindo resultado semelhante à solda convencional

The objective of this study was to evaluate three different types of welding, blowtorch; (conventional/brazing), welder Joint; represented by securing two points (Arc Welding Fixator - Kernit, Brazil), and supplemented with conventional welding), and Laser welding method (welder Desktop - Sisma LM 500, Italy). Two implants Bränemark 4.1 mm platform (Neodent, Curitiba/Brazil) were fixed in an aluminum matrix. Specimens were obtained from a CAD-CAM wax block (Ceramill - Amammgirrbarch) were milled 32 UCLAs (external hexagon, Bränemark platform), and subsequently joined to a prefabricated bar also wax 2.5 mm, the specimens were casted in cobalt-chromium alloy. These specimens were randomly divided and separated into 3 groups: group A (welding direct flame), Group B (mixed welding), C (laser welding), with 6 samples for each group. The specimens of each group were cut in half to simulate a fixed prosthesis in welding, and put together with acrylic resin. The bodies were welded and treated according to the statement. After the specimens were welded, they were manually grinded and submitted to the 3 points bending test technique. Data were subjected to statistical tests of Tukey. Statistical calculations were performed adopting the significance level of 5% (α = 0.05), using SPSS 20 (SPSS Inc., Chicago, IL, USA). There were differences between the soldered groups. The data showed the highest values obtained in groups A and B, conventional welding and soldering joint, and lower in group C, the laser welding. However, within the applied methodology, the laser welding showed a lower flexural strength compared to conventional and mixed welding, and that the advance fixing of electric welding, conventional welding complement (mixed welding), does not change its flexural strength, producing results similar to conventional welding

Efeito de primer para zircônia sobre a resistência ao cisalhamento entre um cimento resinoso e a cerâmica de óxido de zircônio / Effect of primer on the bond strength between resin cement and zirconia

O objetivo deste estudo foi avaliar as influências acarretadas pelo tratamento das superfícies das zircônias com primer apropriado na resistência de união entre cimento resinoso e uma cerâmica de Zircônia. foram utilizados 20 corpos de prova em Zircônia VIPI BLOCK ZIRCONN (VIPI, São Paulo, Brasil) divididos em 2 grupos: Grupo 1 ­ tratamento de superfície da zircônia apenas com jateamento de óxido de alumínio e cimento resinoso PanaviaTF 2.0 (Kuraray, Kurashiki, Japão); e Grupo 2 ­ além do jateamento usou-se o primer Ceramic Primer (3M, São Paulo, Brasil). Os espécimes cerâmicos receberam o cimento manipulado na proporção de 1:1 e foram estocados em água destilada a 37ºC por 24 horas antes e após a termociclagem. O ensaio de cisalhamento foi realizado em máquina de ensaios EMIC DL2000 (EMIC, São Paulo, Brasil), os valores de resistência de união foram apresentados em Mpa e analisados através de Análise de Variância (ANOVA) e teste t Student para amostras independentes. Os valores resistência ao cisalhamento entre cimentos e cerâmica à base de zircônia utilizando os primers mencionados não foram estatisticamente diferentes, isto é, nenhuma diferença significativa foi encontrada entre os grupos G1 (8,70 ± 6,31) e G2 (8,18 ± 3,75). Os testes realizados com o primer não mostraram aumento considerável na resistência de união ao cisalhamento entre cimentos e cerâmica à base de zircônia.

The aim of this study was to evaluate the influence of the use of primer to treat zirconia surfaces on the bond strength between resin cement and zirconia ceramics. The 20 specimens were divided into 2 groups: group 1 ­ zirconia surface treatment with sandblasting with aluminum oxide and Panavia T f 2.0 (Kuraray); Group 2 ­ in addition to the sandblasting Ceramic Primer (3M) was used. Each specimen of the ceramic material received manipulated cement in the proportion 1:1. The specimens were stored in distilled water at 37 ° C for 24 hours before and after thermocycling. Shear test was performed in testing EMIC DL2000 (EMIC, São Paulo, Brazil) and the values of bond strength in MPa were analyzed using Analysis of Variance (ANOVA) and Student t test for independent samples machine. There was no significant difference between the values for shear strength between both studied groups: G1 (8.70 ± 6 groups, 31) and G2 (8.18 ± 3.75). The tests performed with the primer used in this study showed no significant increase on shear bond strength between cement and ceramics based on zirconia.

Development and reproduction of Panonychus citri (Prostigmata: Tetranychidae) on different species and varieties of citrus plants.

The species and varieties of citrus plants that are currently grown can favor the population growth of the citrus red mite Panonychus citri (McGregor) (Prostigmata: Tetranychidae) and alter the pest management programs in citrus groves. In this study we evaluated, in the laboratory, the development and reproduction of P. citri and estimated its life table parameters when reared on four varieties of Citrus sinensis (L.) Osbeck (Valencia, Pera, Natal, and Hamlin), one variety of Citrus reticulata Blanco (Ponkan) and one variety of Citrus limon (L.) Burm. (Sicilian). The incubation period and egg viability were not affected by the host plant. However, the development and survival of the immature stage were significantly lower on Hamlin orange than on Valencia, Pera and Natal oranges, Ponkan mandarin and Sicilian lemon. The fecundity and oviposition period of females were lower on Hamlin orange than on the other hosts. Mites reared on Valencia orange and Sicilian lemon had a higher net reproductive rate (R 0 ), intrinsic growth rate (r) and finite rate of increase (λ), and a shorter interval between generations (T) than on Pera, Natal and Hamlin oranges and Ponkan mandarin. On the other hand, mites reared on Hamlin orange had the lowest R 0 , r and λ and the highest T among the hosts. Based on the results obtained we recommend that for Valencia orange and Sicilian lemon, the mite monitoring programs should be more intense to detect the initial infestation of pest, avoiding the damage in plants and the increase in production costs.

Pressure support-ventilation versus spontaneous breathing with "T-Tube" for interrupting the ventilation after cardiac operations / Pressão de suporte ventilatório versus respiração espontânea em "Tubo-T" para a interrupção da ventilação após as operações cardíacas

OBJECTIVE: To compare pressure-support ventilation with spontaneous breathing through a T-tube for interrupting invasive mechanical ventilation in patients undergoing cardiac surgery with cardiopulmonary bypass. METHODS: Adults of both genders were randomly allocated to 30 minutes of either pressure-support ventilation or spontaneous ventilation with "T-tube" before extubation. Manovacuometry, ventilometry and clinical evaluation were performed before the operation, immediately before and after extubation, 1h and 12h after extubation. RESULTS: Twenty-eight patients were studied. There were no deaths or pulmonary complications. The mean aortic clamping time in the pressure support ventilation group was 62 ± 35 minutes and 68 ± 36 minutes in the T-tube group (P=0.651). The mean cardiopulmonary bypass duration in the pressure-support ventilation group was 89 ± 44 minutes and 82 ± 42 minutes in the T-tube group (P=0.75). The mean Tobin index in the pressure support ventilation group was 51 ± 25 and 64.5 ± 23 in the T-tube group (P=0.153). The duration of intensive care unit stay for the pressure support ventilation group was 2.1 ± 0.36 days and 2.3 ± 0.61 days in the T-tube group (P=0.581). The atelectasis score in the T-tube group was 0.6 ± 0.8 and 0.5 ± 0.6 (P=0.979) in the pressure support ventilation group. The study groups did not differ significantly in manovacuometric and ventilometric parameters and hospital evolution. CONCLUSION: The two trial methods evaluated for interruption of mechanical ventilation did not affect the postoperative course of patients who underwent cardiac operations with cardiopulmonary bypass.

OBJETIVO: Comparar a pressão de suporte ventilatório com a respiração espontânea em "Tubo-T" para interrupção da ventilação invasiva em pacientes submetidos à operação cardíaca. MÉTODOS: Adultos de ambos os sexos foram alocados para pressão de suporte ventilatório por 30 minutos ou o mesmo período de ventilação espontânea com "Tubo-T" antes da extubação. Realizou-se manovacuometria, ventilometria e avaliação clínica antes da operação, imediatamente antes e após a extubação, 1h e 12h após extubação. RESULTADOS: Vinte e oito pacientes foram estudados. Não ocorreram mortes ou complicações respiratórias. O tempo de pinçamento da aorta no grupo suporte ventilatório foi 62 ± 35 minutos e de 68 ± 36 minutos para o "Tubo-T" (P=0,651). O tempo de CEC no grupo suporte ventilatório foi 89 ± 44 minutos e para o "Tubo-T" de 82 ± 42 minutos (P=0,75). O índice de Tobin para o grupo suporte ventilatório foi 51 ± 25 e para o grupo "Tubo-T", 64,5 ± 23 (P=0,153). O tempo na unidade de terapia intensiva para o grupo suporte ventilatório foi 2,1 ± 0,36 dias e para o grupo "Tubo-T", 2,3±0,61 dias (P=0,581). O escore de atelectasia para o grupo "Tubo-T" foi 0,6 ± 0,8 e para o suporte ventilatório foi 0,5 ± 0,6 (P=0,979). Não houve diferença significativa na evolução clínica e nos valores de gasometria, manovacuometria e ventilometria entre ambos os grupos. CONCLUSÃO: O método utilizado para testar a adequação da interrupção da ventilação mecânica invasiva não afetou a evolução pós-operatória dos pacientes submetidos a operações cardíacas com circulação extracorpórea.

Pressure support-ventilation versus spontaneous breathing with "T-Tube" for interrupting the ventilation after cardiac operations.

OBJECTIVE: To compare pressure-support ventilation with spontaneous breathing through a T-tube for interrupting invasive mechanical ventilation in patients undergoing cardiac surgery with cardiopulmonary bypass. METHODS: Adults of both genders were randomly allocated to 30 minutes of either pressure-support ventilation or spontaneous ventilation with "T-tube" before extubation. Manovacuometry, ventilometry and clinical evaluation were performed before the operation, immediately before and after extubation, 1h and 12h after extubation. RESULTS: Twenty-eight patients were studied. There were no deaths or pulmonary complications. The mean aortic clamping time in the pressure support ventilation group was 62 ± 35 minutes and 68 ± 36 minutes in the T-tube group (P=0.651). The mean cardiopulmonary bypass duration in the pressure-support ventilation group was 89 ± 44 minutes and 82 ± 42 minutes in the T-tube group (P=0.75). The mean Tobin index in the pressure support ventilation group was 51 ± 25 and 64.5 ± 23 in the T-tube group (P=0.153). The duration of intensive care unit stay for the pressure support ventilation group was 2.1 ± 0.36 days and 2.3 ± 0.61 days in the T-tube group (P=0.581). The atelectasis score in the T-tube group was 0.6 ± 0.8 and 0.5 ± 0.6 (P=0.979) in the pressure support ventilation group. The study groups did not differ significantly in manovacuometric and ventilometric parameters and hospital evolution. CONCLUSION: The two trial methods evaluated for interruption of mechanical ventilation did not affect the postoperative course of patients who underwent cardiac operations with cardiopulmonary bypass.

Avaliação da ventilação não-invasiva com dois níveis de pressão positiva nas vias aéreas após cirurgia cardíaca / Assessment of noninvasive ventilation with two levels of positive airway pressure in patients after cardiac surgery

INTRODUÇÃO: A aplicação de ventilação por dois níveis de pressão positiva (BiPAP®) associada à fisioterapia respiratória convencional (FRC) no pós-operatório (PO) imediato de cirurgia cardíaca pode contribuir para a diminuição das complicações pulmonares. OBJETIVO: Avaliar a segurança e a adesão da aplicação preventiva do BiPAP® associado a FRC no PO imediato de revascularização do miocárdio. MÉTODOS: Vinte e seis pacientes submetidos a revascularização do miocárdio foram aleatoriamente alocados. O Grupo Controle (GC) foi tratado com FRC, o Grupo BiPAP (GB) foi submetido a 30 minutos de BiPAP®, duas vezes ao dia, associado à FRC. A FRC foi realizada em ambos os grupos, duas vezes ao dia. Todos os pacientes foram avaliados quanto: capacidade vital, permeabilidade das vias aéreas, pressões respiratórias máximas, saturação de oxigênio, frequência cardíaca, frequência respiratória, volume minuto, volume corrente, pressões arteriais sistólica e diastólica. As avaliações foram realizadas durante a internação no pré-operatório, imediatamente após a extubação, e na 24ª e 48ª horas após extubação. RESULTADOS: No GC, 61,5 por cento dos pacientes tiveram algum grau de atelectasias, no GB, 54 por cento (P=0,691). A capacidade vital foi estatisticamente maior no GB no PO (P<0,015). Todos os outros parâmetros de ventilometria, gasometria, manovacuometria e hemodinâmicos foram semelhantes entre os grupos. CONCLUSÃO: A cirurgia de revascularização do miocárdio leva à degradação da função respiratória no PO, e a aplicação da ventilação com pressão positiva (BiPAP®) pode ser benéfica para reestabelecer a função pulmonar mais rapidamente, principalmente a capacidade vital, de forma segura, sendo bem aceita pelos paciente, devido ao maior conforto em relação à sensação de dor durante a execução da fisioterapia respiratória.

INTRODUCTION: The application of two levels of ventilation by positive pressure (BiPAP®) associated with conventional respiratory therapy (CRT) in postoperative periord of cardiac surgery may contribute to reduction of pulmonary complications. OBJECTIVES: To evaluate the safety and compliance of preventive application of BiPAP® CRT associated with immediate postoperative myocardial revascularization. METHODS: 26 patients undergoing coronary artery bypass grafting were randomly allocated in one of the groups. Patients of the Control Group (CG) were treated only with conventional respiratory therapy, compared to BiPAP group (BG) (in addition to conventional respiratory therapy the patients were subjected to 30 minutes of ventilation by two levels twice a day). The conventional respiratory therapy was held in both groups, twice a day. All patients were evaluated for vital capacity, airway permeability, maximal respiratory pressures, oxygen saturation, heart rate, respiratory frequency, Volume Minute, tidal volume, systolic and diastolic blood pressure. Evaluations were performed during hospitalization preoperatively, immediately after extubation, 24h and 48h after extubation. RESULTS: In CG 61.5 percent of patients had some degree of atelectasias, in comparison to 54 percent of BG (P=0.691). The vital capacity was higher in the GB postoperatively (P<0.015). All the other ventilometric, gasometric, hemodynamic and manometric parameters were similar between groups. CONCLUSION: Coronary artery bypass grafting leads to deterioration of respiratory function postoperatively, and the application of positive pressure ventilation (BiPAP®) may be beneficial to restore lung function more quickly, especially vital capacity, safely, and well accepted by patients due to greater comfort with the sensation of pain during the execution of respiratory therapy.

Assessment of noninvasive ventilation with two levels of positive airway pressure in patients after cardiac surgery.

INTRODUCTION: The application of two levels of ventilation by positive pressure (BiPAP®) associated with conventional respiratory therapy (CRT) in postoperative periord of cardiac surgery may contribute to reduction of pulmonary complications. OBJECTIVES: To evaluate the safety and compliance of preventive application of BiPAP® CRT associated with immediate postoperative myocardial revascularization. METHODS: 26 patients undergoing coronary artery bypass grafting were randomly allocated in one of the groups. Patients of the Control Group (CG) were treated only with conventional respiratory therapy, compared to BiPAP group (BG) (in addition to conventional respiratory therapy the patients were subjected to 30 minutes of ventilation by two levels twice a day). The conventional respiratory therapy was held in both groups, twice a day. All patients were evaluated for vital capacity, airway permeability, maximal respiratory pressures, oxygen saturation, heart rate, respiratory frequency, Volume Minute, tidal volume, systolic and diastolic blood pressure. Evaluations were performed during hospitalization preoperatively, immediately after extubation, 24h and 48h after extubation. RESULTS: In CG 61.5% of patients had some degree of atelectasias, in comparison to 54% of BG (P=0.691). The vital capacity was higher in the GB postoperatively (P<0.015). All the other ventilometric, gasometric, hemodynamic and manometric parameters were similar between groups. CONCLUSION: Coronary artery bypass grafting leads to deterioration of respiratory function postoperatively, and the application of positive pressure ventilation (BiPAP®) may be beneficial to restore lung function more quickly, especially vital capacity, safely, and well accepted by patients due to greater comfort with the sensation of pain during the execution of respiratory therapy.