The Laboratory Characterization of Fugitive Aerosol Emissions From a Standard Jet Nebulizer With and Without a Filtered Mouthpiece.

Background and objective The risk of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission from patients with coronavirus disease 2019 (COVID-19) during nebulization is unclear. In this study, we aimed to address this issue. Methods Fugitive emissions of aerosolized saline during nebulization were observed using a standard jet nebulizer fitted with unfiltered and filtered mouthpieces connected via a mannequin to a breathing simulator. Fugitive emissions were observed by using a laser sheet and captured on high-definition video, and they were measured by using optical particle counters positioned where a potential caregiver may be administering nebulization and three other locations in the sagittal plane at various distances downstream of the mannequin. Results The use of a standard unfiltered mouthpiece resulted in significant emission of fugitive aerosols ahead of and above the mannequin (spread over 2 m in front). A mouthpiece with a filter-adaptor effectively suppressed the emissions, with only minor leakage from the nebulizer cup. Particle count measurements supported the visual observations, providing total particle count levels and aerosol concentration levels at the measurement locations. The levels decayed slowly with downstream distance. Conclusions The visualization described above captured the dispersion of emitted aerosols in the plane of the laser sheet, aligned with the sagittal plane. The particle count measurements provided temporal and spatial distributions of the aerosol concentration levels over the time and locations considered. However, the exhaled air and aerosolized droplets spread three-dimensionally in front of and above the mannequin. The results visually highlight the effectiveness of using a filtered mouthpiece in suppressing the fugitive aerosols and identify an approach for limiting the occupational exposure of healthcare workers to these emissions while administering nebulized therapies.

Visualizing droplet dispersal for face shields and masks with exhalation valves.

Several places across the world are experiencing a steep surge in COVID-19 infections. Face masks have become increasingly accepted as one of the most effective means for combating the spread of the disease when used in combination with social-distancing and frequent hand-washing. However, there is an increasing trend of people substituting regular cloth or surgical masks with clear plastic face shields and with masks equipped with exhalation valves. One of the factors driving this increased adoption is improved comfort compared to regular masks. However, there is a possibility that widespread public use of these alternatives to regular masks could have an adverse effect on mitigation efforts. To help increase public awareness regarding the effectiveness of these alternative options, we use qualitative visualizations to examine the performance of face shields and exhalation valves in impeding the spread of aerosol-sized droplets. The visualizations indicate that although face shields block the initial forward motion of the jet, the expelled droplets can move around the visor with relative ease and spread out over a large area depending on light ambient disturbances. Visualizations for a mask equipped with an exhalation port indicate that a large number of droplets pass through the exhale valve unfiltered, which significantly reduces its effectiveness as a means of source control. Our observations suggest that to minimize the community spread of COVID-19, it may be preferable to use high quality cloth or surgical masks that are of a plain design, instead of face shields and masks equipped with exhale valves.

Visualizing the effectiveness of face masks in obstructing respiratory jets.

The use of face masks in public settings has been widely recommended by public health officials during the current COVID-19 pandemic. The masks help mitigate the risk of cross-infection via respiratory droplets; however, there are no specific guidelines on mask materials and designs that are most effective in minimizing droplet dispersal. While there have been prior studies on the performance of medical-grade masks, there are insufficient data on cloth-based coverings, which are being used by a vast majority of the general public. We use qualitative visualizations of emulated coughs and sneezes to examine how material- and design-choices impact the extent to which droplet-laden respiratory jets are blocked. Loosely folded face masks and bandana-style coverings provide minimal stopping-capability for the smallest aerosolized respiratory droplets. Well-fitted homemade masks with multiple layers of quilting fabric, and off-the-shelf cone style masks, proved to be the most effective in reducing droplet dispersal. These masks were able to curtail the speed and range of the respiratory jets significantly, albeit with some leakage through the mask material and from small gaps along the edges. Importantly, uncovered emulated coughs were able to travel notably farther than the currently recommended 6-ft distancing guideline. We outline the procedure for setting up simple visualization experiments using easily available materials, which may help healthcare professionals, medical researchers, and manufacturers in assessing the effectiveness of face masks and other personal protective equipment qualitatively.