Aquatic connectivity: challenges and solutions in a changing climate.

The challenge of managing aquatic connectivity in a changing climate is exacerbated in the presence of additional anthropogenic stressors, social factors, and economic drivers. Here we discuss these issues in the context of structural and functional connectivity for aquatic biodiversity, specifically fish, in both the freshwater and marine realms. We posit that adaptive management strategies that consider shifting baselines and the socio-ecological implications of climate change will be required to achieve management objectives. The role of renewable energy expansion, particularly hydropower, is critically examined for its impact on connectivity. We advocate for strategic spatial planning that incorporates nature-positive solutions, ensuring climate mitigation efforts are harmonized with biodiversity conservation. We underscore the urgency of integrating robust scientific modelling with stakeholder values to define clear, adaptive management objectives. Finally, we call for innovative monitoring and predictive decision-making tools to navigate the uncertainties inherent in a changing climate, with the goal of ensuring the resilience and sustainability of aquatic ecosystems.

Monitoring for the adaptive management of rivers.

Monitoring for adaptive management (AM) involves collection of data with the aim of reducing uncertainty about links between human pressures (e.g. water abstraction from rivers), consequent stressors (e.g. low river flows) and environmental state (e.g. biodiversity). 'Surveillance monitoring' involves documenting trends in state, without the aim of understanding relationships between state, stressors, and pressures. Critics have highlighted that surveillance monitoring dominates monitoring investments but is not supporting AM. Decision-makers continue to be disappointed by monitoring data that are unsuitable for AM, yet designers of monitoring programs tend to make decisions that reinforce rather than reimagine the status quo. We argue that a structured, collaborative approach to objective-setting is required to break the status quo. We collaborated with regional management authorities to develop monitoring objectives and implementation strategies to support AM of New Zealand's rivers. Our collaborative approach discouraged 'failure fearing' and encouraged reimagining 'what could be' as opposed to 'what is.' Seventeen monitoring objectives were identified based on the AM requirements of national policy and regional authorities. Several objectives-particularly those arising from national policy-stretch the limits of what environmental science can currently provide. There were also strong trade-offs among objectives. We offer practical implementation strategies for overcoming the technical challenges of, and reducing trade-offs among, monitoring objectives. These strategies point to a monitoring program that contrasts strongly with one aimed at surveillance. Monitoring for AM is more complex than monitoring for surveillance, so strong leadership is required for successful implementation.

No difference between critical and sprint swimming speeds for two galaxiid species.

Researchers have used laboratory experiments to examine how fish might be affected by anthropogenic alterations and conclude how best to adjust fish passage and culvert remediation designs in response. A common way to document swimming performance for this purpose is measuring fish critical swimming speed (Ucrit ). Nonetheless, the Ucrit protocol as defined by Brett [(1964) Journal of the Fisheries Research Board of Canada, 21, 1183-1226] may be inappropriate for studying swimming performance and determining how it relates to upstream migration in benthic fish, as they may not actively swim throughout the entire Ucrit test. An alternative method to estimate swimming performance is sprint swimming speed (Usprint ), which is suggested to be a measure of the burst speed of fish rather than maximum sustained swimming speed. The authors conducted comparative swimming performance experiments to evaluate whether Usprint can be used to compare swimming performance of benthic species to that of pelagic, actively swimming species. They measured individual swimming speeds of inanga (Galaxias maculatus), an actively swimming pelagic species, and banded kokopu (Galaxias fasciatus), a fish that exhibits benthic station-holding behaviour, using both the Usprint and Ucrit test. Experiments revealed that no significant statistical difference between swimming speeds was estimated using the Ucrit and Usprint test protocols for both G. maculatus and G. fasciatus. The result of this study suggests that fish swimming speeds obtained using these two methods are comparable for the species used in this study. By using Usprint for benthic-associated fish and Ucrit for pelagic fish, we may be able to compare a broader range of species' swimming abilities for use in a fish passage context.

Machine learning based assessment of small-bodied fish tracking to evaluate spoiler baffle fish passage design.

Fish passage research is important to mitigate the adverse effects of fragmented river habitats caused by waterway structures. The scale at which this research is undertaken varies from small-scale laboratory prototype studies to in-situ observations at various fish passage structures and bottlenecks. Using DeepLabCut, we introduce and evaluate a machine learning based workflow to track small-bodied fish in order to facilitate improved fish passage management. We specifically studied the behaviour and kinematics of Galaxias maculatus, a widespread diadromous Southern Hemisphere fish species. Upstream fish passage was studied in the presence of three different patches of spoiler baffles at an average water velocity of 0.4 m/s. In semi-supervised mode, the fish locations were extracted, and fish behaviour, such as swimming pathways and resting locations, was analysed based on extracted positions and recorded kinematic parameters. Individual fish behaviour and kinematic parameters were then used to assess the suitability of the three different spoiler baffle designs for enhancing fish passage. Using this technique, we were able to demonstrate where different spoiler baffle configurations resulted in significant differences in fish passage success and behaviour. For example, medium-spaced smaller baffles provided more accessible and uniform resting locations, which were required for efficient upstream passage. Results are discussed in relation to fish passage management at small instream structures.

Estimation of policy-relevant reference conditions throughout national river networks.

A method for objectively estimating reference states for suspended fine sediment (turbidity) is presented. To be fit for water policy development and implementation the method had to satisfy four requirements: (1) the method must not be dependent on data from minimally-disturbed reference sites; (2) the method must facilitate characterization of reference states throughout heterogeneous river networks, given patchy data; (3) the classification of reference states must be relevant and legitimate to end-users; (4) the method should provide several classifications of reference states at different spatial resolutions allowing selection of the resolution yielding the most parsimonious classification of reference states throughout the network. Implementing the method involves two stages: (1) Development of a river classification based on sediment supply and retention regimes (defining 'turbidity classes') at multiple spatial resolutions. (2) At each resolution, for each turbidity class, estimation of a reference state based on relationships between turbidity and anthropogenic stressors, then objective selection of the resolution yielding the most parsimonious classification of reference states throughout the network. Implementing the method requires a river network GIS and turbidity data within classes, preferably from monitoring sites spanning the domains of the anthropogenic stressor variables used for model-based estimation of reference states.•A method is presented for estimating reference states for suspended fine sediment (turbidity) throughout spatially heterogeneous river networks.•Development of the method was guided by the requirements of policy analysts during reform of water policy in New Zealand.•The method presented was used to develop fine sediment regulatory thresholds of national water policy.

A comparison of passage efficiency for native and exotic fish species over an artificial baffled ramp.

This study used an experimental approach to compare the passage success of native and exotic fish species from the temperate Southern Hemisphere over an artificial baffled fish ramp designed for overcoming low-head (≤1.0 m) fish migration barriers. Passage efficiency was, on average, lower for the exotic species [koi carp (Cyprinus carpio), rudd (Scardinius erythrophthalmus) and rainbow trout (Oncorhynchus mykiss)] compared to the native species [inanga (Galaxias maculatus), redfin bully (Gobiomorphus huttoni) and common bully (Gobiomorphus cotidianus)]. Nonetheless, there was considerable variation between individual species, with rainbow trout outperforming common bully and juvenile inanga, but koi carp and rudd failing to pass any of the ramps. The differences in predicted probability of passage success between the native and exotic fish species in this study were sufficient in some cases to indicate the potential for the baffled fish ramps to operate as a selective migration barrier. Nonetheless, further testing is required to validate these results across a broader range of conditions before deployment.

Investigating the construct validity of a haptic virtual caries simulation for dental education.

Introduction: Teaching dental caries removal is limited by the material and methods available in the preclinical teaching space. Plastic teeth do not simulate the tactile feel of a lesion and natural teeth do not allow for standardised training and assessment. A novel method for simulating caries has been reported. Here, to investigate the construct validity of a caries simulation, whether haptic simulation could contribute to the understanding of caries removal, the performance of first-year dental students on the haptic simulation exercise is compared with that of experienced dentists. Method: A virtual block comprising healthy dentine, pulp, enamel and a carious lesion with significant spread along the amelodentinal junction (ADJ) was developed for the Simodont dental trainer. The case was presented to 112 first-year students and 17 clinicians following a 15 min training period on a block which contained green caries and displayed live progress throughout the exercise. All participants were given the same verbal instructions: to remove all unsupported enamel and caries along the ADJ while retaining as much healthy tissue as possible. Results: Clinicians performed better than the dental novices in precision and overall performance. Clinicians removed more material on average, except for healthy dentine, of which similar amounts were removed by both groups. Discussion: We presented a novel haptic caries exercise and investigated the construct validity of the task. The simulation may bridge the gap between preclinical and clinical dental education in caries removal. Conclusion: Clinically experienced dentists outperformed novices on a haptic caries simulation exercise. The exercise may be a useful tool for assessing conceptual understanding of caries removal.

Development and characterisation of dental composites containing anisotropic fluorapatite bundles and rods.

OBJECTIVES: To develop dental composites incorporating fluorapatite (FA) crystals as a secondary filler and to characterise degree of conversion, key mechanical properties and fluoride release. METHODS: FA rod-like crystals and bundles were hydrothermally synthesised and characterised by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD) and 19F MAS-NMR. Composites were formulated containing BisGMA/TEGDMA/BisEMA and barium-aluminium-silicate glass (0FA). FA crystals were incorporated at 10 (10FA), 20 (20FA), 30 (30FA) and 40wt% (40FA) maintaining a filler content of 80wt% (63-67vol%). Degree of conversion (DC), flexural strength (FS), flexural modulus (FM), fracture toughness (K1C), Vickers hardness (HV) and 2-body wear were measured. Fluoride release was measured in neutral and acidic buffers. RESULTS: XRD and 19F MAS-NMR confirmed that only FA was formed, whilst SEM revealed the presence of single rods and bundles of nano-rods. DC ranged between 56-60% (p>0.05). FA composites showed lower FM and lower FS (p<0.05), but comparable wear resistance and HV (p>0.05) to 0FA. 30FA and 40FA showed similar K1C to 0FA (p>0.05), with SEM showing evidence of toughening mechanisms, whereas 10FA and 20FA showed lower K1C (p<0.05). FA containing composites released fluoride that was proportional to the amount of FA incorporated (p<0.05) but only under acidic conditions. SIGNIFICANCE: The addition of FA to the experimental composites reduced strength and stiffness but not the DC, hardness or wear rate. 30FA and 40FA had a higher K1C compared to other FA groups. Fluoride release occurred under an accelerated acidic regime, suggesting potential as a bioactive 'smart' composite.

An approach to understanding tribological behaviour of dental composites through volumetric wear loss and wear mechanism determination; beyond material ranking.

OBJECTIVE: To investigate the fundamental wear mechanisms of six resin-based composite (RBC) formulations during short-term in vitro wear testing. MATERIALS: RBC materials were condensed into rectangular bar-shaped specimens and light irradiated using the ISO 4049 specimen manufacture and irradiation protocol. Wear testing (n=10 specimens for each RBC) was performed on a modified pin-on-plate wear test apparatus and wear facets were analysed for wear volume loss using a white light profilometer. The wear tested RBC specimens and their corresponding antagonists were analysed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively to determine the wear mechanism. RESULTS: Data generated using the profilometer showed variations in the mean total wear volume (mm3) between the RBCs tested (p<0.05). Abrasive wear was evident in all RBCs investigated with varying degrees of damage. Material transfer/deposition of the filler particles on the corresponding antagonists was evident in two RBC materials (Filtek Supreme and Kalore) indicative of a further adhesive wear mechanism. CONCLUSION: It is proposed that the approach employed to use a combination of measurement and analytical techniques to quantify the wear facet volume (profilometry), wear trough (SEM) and material transfer (EDS) provides more useful information on the wear mechanism and the tribology of the system rather than relying on a simple wear ranking for the RBC materials as is routinely the case in dental research studies.

How to keep on top of roofing issues.

Paul Franklin, who heads up the Technical team at Bedford-based specialist testing and defect analysis company, RAM Consultancy, explains how healthcare building owners and occupiers such as NHS Trusts, and their estates and facilities teams, can best manage, maintain, and, when necessary, refurbish, their building envelope and roofs, in the process gaining some perhaps unexpected benefits.

Brain-derived neurotrophic factor-mediated effects on mitochondrial respiratory coupling and neuroprotection share the same molecular signalling pathways.

Intracerebral injection of ibotenate into mouse pups induced grey matter lesions and white matter cysts; co-administration of brain-derived neurotrophic factor (BDNF) produced a dose-dependent reduction in these lesions. In contrast, glial cell line-derived neurotrophic factor (GDNF) had no significant effect, whereas nerve growth factor (NGF) or interleukin-1ß (IL-1ß) resulted in dose-dependent exacerbation. The neuroprotective effects of BDNF were abolished by co-administration of anti-BDNF antibody or MEK inhibitors, or ABT-737, a BH3 mimetic and Bcl-2 antagonist. The actions of BDNF, GDNF and NGF were measured in a parallel in vitro study on the oxidative metabolism of mouse brain mitochondria. BDNF produced a concentration-dependent increase in the respiratory control index (RCI, a measure of respiratory coupling efficiency, ATP synthesis, and organelle integrity) when co-incubated with synaptosomes containing signal transduction pathways; but GDNF failed to modify RCI, and NGF had only weak effects. BDNF had no effect on pure mitochondria, and enhanced oxidation only when complex I substrates were used. The effect of BDNF was inhibited by anti-BDNF antibody, MEK inhibitors or ABT-737, and also by IL-1ß, indicating that the mitochondrial effects are mediated via the same MEK-Bcl-2 pathway as the neuroprotection. The complex I inhibitor rotenone, a compound implicated in the aetiology of Parkinson's disease, inhibited both the in vitro mitochondrial and in vivo neuroprotective effects of BDNF. The ability of BDNF to modify brain metabolism and the efficiency of oxygen utilization via a MEK-Bcl-2 pathway may be an important component of the neuroprotective action observed with this neurotrophin.

An investigation of the ability of computerized axiography to reproduce occlusal contacts.

Intraoral excursive tooth contacts were compared with contacts made on both an unprogrammed and programmed Denar D5a articulator. 20 subjects were used to obtain study models which were mounted using a facebow transfer in Intercuspal Position. Cadiax Data was used to customise the articulator and left and right intraoral excursive contacts were examined and transferred from the mouth to the articulator using occlusagram wax bites. Using image analysis, the proportion of corresponding tooth contacts and the percentage of corresponding tooth contacts were significantly better when the articulator was programmed.

Flow controls on lowland river macrophytes: a review.

We review the current status of knowledge regarding the role that flow parameters play in controlling the macrophyte communities of temperate lowland rivers. We consider both direct and indirect effects and the interaction with other factors known to control macrophyte communities. Knowledge gaps are identified and implications for the management of river systems considered. The main factors and processes controlling the status of macrophytes in lowland rivers are velocity (hence also discharge), light, substrate, competition, nutrient status and river management practices. We suggest that whilst the characteristics of any particular macrophyte community reflect the integral effects of a combination of the factors, fundamental importance can be attributed to the role of discharge and velocity in controlling instream macrophyte colonisation, establishment and persistence. Velocity and discharge also appear to control the relative influence of some of the other controlling factors. Despite the apparent importance of velocity in determining the status of macrophyte communities in lowland rivers, relatively little is understood about the nature of the processes controlling this relationship. Quantitative knowledge is particularly lacking. Consequently, the ability to predict macrophyte abundance and distribution in rivers is still limited. This is further complicated by the likely existence of feedback effects between the growth of macrophytes and velocity. Demand for water resources increases the pressure on lowland aquatic ecosystems. Despite growing recognition of the need to allocate water for the needs of instream biota, the inability to assess the flow requirements of macrophyte communities limits the scope to achieve this. This increases the likelihood of overexploitation of the water resource as other users, whose demands are quantifiable, are prioritised.

Overeruption--another challenge?

UNLABELLED: Awareness of the occlusal changes following individual tooth loss may be increasingly important when planning treatment for patients who are likely to retain a relatively intact dentition throughout life. Some evidence exists to support dentists who are considering prevention or treatment of overeruption. This paper explores the literature available on the changes in the prevalence of tooth loss, the prevalence and presentation of overeruption, its relevance to dental restoration and the prevention and treatment of overeruption. CLINICAL RELEVANCE: This article reviews the prevalence and consequence of overeruption in posterior teeth.

Reinforcement of poly(methyl methacrylate) denture base with glass flake.

OBJECTIVES: Since the introduction of poly(methyl methacrylate) as a denture base material, it has suffered from having relatively poor mechanical properties. Many methods of improving its strength and toughness have been investigated. Most of these have not been adopted due to: increased cost, the need for specialist processing equipment or increased laboratory time due to more complicated procedures. Glass flake has been used as a reinforcing agent in many industrial polymers, but is as yet untested with denture base acrylic materials. The aim of this study is to evaluate the effect of adding glass flake to denture base acrylic powder on the fracture toughness of the set material. METHODS: Glass flake was added in 5, 10 or 20% w/w to Trevalon denture base powder. The material was mixed, flasked, packed and processed in a manner typical for a denture base material. Fracture toughness was determined using a double torsion test technique. RESULTS: The addition of glass flake gave up to a 69% increase in fracture toughness compared to plain Trevalon material. The addition of 5% glass flake lead to an improvement in fracture toughness that was statistically significant compared to both plain Trevalon and the 10 and 20% groups. SIGNIFICANCE: The significant improvement in fracture toughness of a denture base acrylic material using glass flake is an extremely promising result. Other mechanical properties will require testing before glass flake can be recommended as a reinforcing agent for denture base acrylic materials.