Ni-Centered Coordination-Induced Spin-State Switching Triggered by Electrical Stimulation.

We herein report the synthesis and magnetic properties of a Ni(II)-porphyrin tethered to an imidazole ligand through a flexible electron-responsive mechanical hinge. The latter is capable of undergoing a large amplitude and fully reversible folding motion under the effect of electrical stimulation. This redox-triggered movement is exploited to force the axial coordination of the appended imidazole ligand onto the square-planar Ni(II) center, resulting in a change in its spin state from low spin (S = 0) to high spin (S = 1) proceeding with an 80% switching efficiency. The driving force of this reversible folding motion is the π-dimerization between two electrogenerated viologen cation radicals. The folding motion and the associated spin state switching are demonstrated on the grounds of NMR, (spectro)electrochemical, and magnetic data supported by quantum calculations.

Light-Controlled Aggregation and Gelation of Viologen-Based Coordination Polymers.

Ditopic bis-(triazole/pyridine)viologens are bidentate ligands that self-assemble into coordination polymers. In such photo-responsive materials, light irradiation initiates photo-induced electron transfer to generate π-radicals that can self-associate to form π-dimers. This leads to a cascade of events: processes at the supramolecular scale associated with mechanical and structural transition at the macroscopic scale. By tuning the irradiation power and duration, we evidence the formation of aggregates and gels. Using microscopy, we show that the aggregates are dense, polydisperse, micron-sized, spindle-shaped particles which grow in time. Using microscopy and time-resolved micro-rheology, we follow the gelation kinetics which leads to a gel characterized by a correlation length of a few microns and a weak elastic modulus. The analysis of the aggregates and the gel states vouch for an arrested phase separation process, a new scenario to supramolecular systems.

Unprecedented ON/OFF Ratios in Photoactive Diarylethene-Bisthienylbenzene Molecular Junctions.

Photoactive molecular junctions, based on 4 nm thick diarylethene (DAE) and 5 nm thick bisthienylbenzene (BTB) layers, were fabricated by electrochemical deposition. Total thickness was around 9 nm, that is, above the direct tunneling limit and in the hopping regime. The DAE units were switched between their open and closed forms. The DAE/BTB bilayer structure exhibits new electronic functions combining photoswitching and photorectification. The open form of DAE/BTB shows low conductance and asymmetric I-V curves while the closed form shows symmetric I-V curves and high conductance. More importantly, unprecedented ON/OFF current ratios of over 10 000 at 1 V were reproducibly measured.

Electron-Triggered Metamorphism in Palladium-Driven Self-Assembled Architectures.

A metal-induced self-assembly strategy is used to promote the π-dimerization of viologen-based radicals at room temperature and in standard concentration ranges. Discrete box-shaped 2:2 (M:L) macrocycles or coordination polymers are formed in solution by self-assembly of a viologen-based ditopic ligand with cis-[Pd(en)(NO3)2], trans-[Pd(CH3CN)2(Cl)2], or [Pd(CH3CN)4(BF4)2]. Changing the redox state of the bipyridium units involved in the tectons, from their dicationic state to their radical cation state, results in a reversible "inflation/deflation" of the discrete 2:2 (M:L) macrocyclic assemblies associated to a large modification in the size of their inner cavity. Viologen-centered electron transfer is also used to trigger a dissociation of the coordination polymers formed with tetrakis(acetonitrile)Pd(II), the driving force of the disassembling process being the formation of discrete box-shaped 2:2 (M:L) assemblies stabilized by π-dimerization of both viologen cation radicals.

Highly Efficient Photoswitch in Diarylethene-Based Molecular Junctions.

Thin layers of diarylethene oligomers (oligo(DAE)) were deposited by electrochemical reduction of a diazonium salt on glassy carbon and gold electrodes. The layers were fully characterized using electrochemistry, XPS, and AFM, and switching between open and closed forms using light was evidenced. Solid-state molecular junctions (MJs), in which a C-AFM tip is used as the top contact, were fabricated with total layer thicknesses fixed at 2-3 nm and 8-9 nm, i.e. below and above the direct tunneling limit. DAE was then photoswitched between its open and closed forms. Oligo(DAE) MJs using the open form of DAE are highly resistive while those with DAE in the closed form are more conductive. ON/OFF ratios of 2-3 and 200-400 were obtained for 3-nm- and 9-nm-thick DAE MJs, respectively.

Correction: Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale.

Correction for 'Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale' by Imen Hnid et al., Nanoscale, 2019, 11, 23042-23048.

Highly Efficient Long-Range Electron Transport in a Viologen-Based Molecular Junction.

Thin layers of viologen-based oligomers with thicknesses between 3 and 14 nm were deposited on gold electrodes by electrochemical reduction of a diazonium salt, and then a Ti/Au top contact was applied to complete a solid-state molecular junction (MJ). MJs show symmetric J- V curves and highly efficient long-range transport, with an attenuation factor as small as 0.25 nm-1. This is attributed both to the fact that the viologen LUMO energy lies between the energies of the Fermi levels of the two contacts and to strong electronic coupling between molecules and contacts. As a consequence, resonant tunneling is likely to be the dominant transport mechanism within these MJs, but the temperature dependence of the transport properties suggests that activated redox hopping plays a role at high temperature.

Electrografted monolayer based on a naphthalene diimide-ruthenium terpyridine complex dyad: efficient creation of large-area molecular junctions with high current densities.

An electron donor-acceptor dyad has been designed for the creation of large-area molecular junctions (MJ). Diazonium cation electrografting was used to form well controlled monolayers. The robustness of the monolayer enabled the creation of MJs using direct top-coat evaporation with a high yield of operating devices.

Control of Rectification in Molecular Junctions: Contact Effects and Molecular Signature.

Thin layers of oligomers with thickness between 7 and 9 nm were deposited on flat gold electrode surfaces by electrochemical reduction of diazonium reagents, then a Ti(2 nm)/Au top contact was applied to complete a solid-state molecular junction. The molecular layers investigated included donor molecules with relatively high energy HOMO, molecules with high HOMO-LUMO gaps and acceptor molecules with low energy LUMO and terminal alkyl chain. Using an oligo(bisthienylbenzene) based layer, a molecule whose HOMO energy level in a vacuum is close to the Fermi level of the gold bottom electrode, the devices exhibit robust and highly reproducible rectification ratios above 1000 at low voltage (2.7 V). Higher current is observed when the bottom gold electrode is biased positively. When the molecular layer is based on a molecule with a high HOMO-LUMO gap, i.e., tetrafluorobenzene, no rectification is observed, while the direction of rectification is reversed if the molecular layer consists of naphtalene diimides having low LUMO energy level. Rectification persisted at low temperature (7 K), and was activationless between 7 and 100 K. The results show that rectification is induced by the asymmetric contact but is also directly affected by orbital energies of the molecular layer. A "molecular signature" on transport through layers with thicknesses above those used when direct tunneling dominates is thus clearly observed, and the rectification mechanism is discussed in terms of Fermi level pinning and electronic coupling between molecules and contacts.

Polyanils and Polyboranils: Synthesis, Optical Properties, and Aggregation-Induced Emission.

A first series of polyanils were synthesized by a simple condensation between either isomers of phenylenediamine derivatives or 1,3,5-benzenetriamine and 4-(diethylamino)salicylaldehyde, while a second series resulted from the condensation between 4,6-dihydroxyisophthalaldehyde or 2,5-dihydroxyterephthalaldehyde and differently substituted anilines. All these polyanils showed good chelating abilities toward trivalent boron fragments such as BF2 or BPh2 to yield the corresponding boranils. The optical properties of these novel fluorophores have been studied both in solution and in the solid-state and show emission wavelengths covering the entire visible spectrum and near-infrared (NIR), depending on molecular structure, substitution, and environment. While faintly fluorescent in solution in their molecular state, some polyanils show typical aggregation-induced emission (AIE) behavior upon addition of increasing amounts of water in THF solution, leading to a sizable enhancement of fluorescence intensity.

Diarylethene Self-Assembled Monolayers: Cocrystallization and Mixing-Induced Cooperativity Highlighted by Scanning Tunneling Microscopy at the Liquid/Solid Interface.

Stimulus control over 2D multicomponent molecular ordering on surfaces is a key technique for realizing advanced materials with stimuli-responsive surface properties. The formation of 2D molecular ordering along with photoisomerization was monitored by scanning tunneling microscopy at the octanoic acid/highly oriented pyrolytic graphite interface for a synthesized amide-containing diarylethene, which underwent photoisomerization between the open- and closed-ring isomers and also a side-reaction to give the annulated isomer. The nucleation (Kn) and elongation (Ke) equilibrium constants were determined by analysis of the concentration dependence of the surface coverage by using a cooperative model at the liquid/solid interface. It was found that the annulated isomer has a very large equilibrium constant, which explains the predominantly observed ordering of the annulated isomer. It was also found that the presence of the closed-ring isomer induces cooperativity into the formation of molecular ordering composed of the open-ring isomer. A quantitative analysis of the formation of ordering by using the cooperative model has provided a new view of the formation of 2D multicomponent molecular ordering.

Substituent and solvent effects on the excited state deactivation channels in anils and boranils.

Differently substituted anils (Schiff bases) and their boranil counterparts lacking the proton-transfer functionality have been studied using stationary and femtosecond time-resolved absorption, fluorescence, and IR techniques, combined with quantum mechanical modelling. Dual fluorescence observed in anils was attributed to excited state intramolecular proton transfer. The rate of this process varies upon changing solvent polarity. In the nitro-substituted anil, proton translocation is accompanied by intramolecular electron transfer coupled with twisting of the nitrophenyl group. The same type of structure is responsible for the emission of the corresponding boranil. A general model was proposed to explain different photophysical responses to different substitution patterns in anils and boranils. It is based on the analysis of changes in the lengths of CN and CC bonds linking the phenyl moieties. The model allows predicting the contributions of different channels that involve torsional dynamics to excited state depopulation.

Luminescent materials: locking π-conjugated and heterocyclic ligands with boron(III).

Multidisciplinary research on novel organic luminescent dyes is propelled by potential applications in plastic electronics and biomedical sciences. The construction of sophisticated fluorescent dyes around a tetrahedral boron(III) center is a particular approach that has fueled the creativity of chemists. Success in this enterprise has been readily achieved with simple synthetic protocols, the products of which display unusual spectroscopic behavior. This account is a critical review of recent advances in the field of boron(III) complexes (excluding BODIPYs and acetylacetonate boron complexes) involving species displaying similar coordination features, and we outline their potential development in several disciplines.

Ultrafast photoinduced electron transfer in viologen-linked BODIPY dyes.

New boron-dipyrromethene (BODIPY) dyes linked to viologen are prepared and their photophysical and electrochemical properties are investigated. Both synthesized molecules have similar electronic absorption spectra with the absorption maximum localized at 517 and 501 nm for dye 1 and dye 2, respectively. They exhibit well-defined redox behavior, highlighting the presence of BODIPY and viologen subunits, with little perturbation of the redox potential of both subunits with respect to the parent compounds. Both dyes are heavily quenched by photoinduced electron transfer from the BODIPY to the viologen subunit. The transient absorption technique demonstrates that dye 2 forms the viologen radical within a timeframe of 7.1 ps, and that the charge-separated species has a lifetime of 59 ps. Sustained irradiation of dye 2 in the presence of a tertiary amine allows for the accumulation of BODIPY-methyl-4,4'-bipyridinium (BODIPY-MV(+)), as observed by its characteristic absorption at 396 and 603 nm. However, dye 2 does not generate catalytic amounts of hydrogen under standard conditions.

Fluorescent boron(III) iminocoumarins (Boricos).

Complexation of iminocoumarin derivatives with BF3·OEt2 provides novel N^N boron(III) dyes exhibiting high absorption coefficients and quantum yields as great as 81%. The excellent chemical stability of these dyes enables the grafting of Boranil or Bodipy units to give derivatives in which the Borico subunit can act either as an energy acceptor or as an antenna for a red emitting fluorophore.

Synthesis of luminescent ethynyl-extended regioisomers of borate complexes based on 2-(2'-hydroxyphenyl)benzoxazole.

A series of thirteen luminescent tetrahedral borate complexes based on the 2-(2'-hydroxyphenyl)benzoxazole (HBO) core is presented. Their synthesis includes the incorporation of an ethynyl fragment by Sonogashira cross-coupling reaction, with the goal of extending the conjugation and consequently redshifting their emission wavelength. Different regioisomers, substituted in the 3-, 4-, or 5-position of the phenolate side of the HBO core, were studied in order to compare their photophysical properties. The complexes were characterized by X-ray diffraction and NMR, UV/Vis, and emission spectroscopy in solution and in the solid state. In all cases, complexation to boron leads to a donor-acceptor character that impacts their photophysical properties. Complexes with a 3- or 5-substituted fragment display mild to pronounced internal charge transfer (ICT), a feature strengthened by the presence of p-dibutylaminophenylacetylene in the molecular structure, protonation of the nitrogen atom of which leads to a significant blueshift and an increase in quantum yield. On the contrary, when the ethynyl module is grafted on the 4-position, narrow, structured, symmetrical absorption/emission bands are observed. Moreover, the fact that protonation has little effect on the emission maximum wavelength reveals singlet excited-state decay. Solid-state emission properties reveal a redshift compared to solution, explained by tight packing of the π-conjugated systems and the high planarity of the dyes. Subsequent connection of these complexes to other photoactive subunits (BODIPY, Boranil) provides dyads in which efficient cascade energy transfer is observed.

Chemistry on Boranils: an entry to functionalized fluorescent dyes.

A Boranil fluorophore bearing a nitro-phenyl group has been selectively reduced to its anilino form and then successfully converted to amide, imine, urea, and thiourea derivatives which are fluorescent dyes. Its isolated isothiocyanate intermediate derivative was used in a model labeling experiment with Bovine Serum Albumin (BSA). The purified labeled-BSA exhibits strong luminescence (Φ(f) = 47%) in a phosphate buffer at pH = 7.4.

Synthesis of luminescent 2-(2'-hydroxyphenyl)benzoxazole (HBO) borate complexes.

Complexation of boron trifluoride by a series of electron donor/acceptor substituted 2-(2'-hydroxy phenyl)benzoxazole (HBO) derivatives yields luminescent B(III) complexes with an emission wavelength ranging from 385 to 425 nm in dichloromethane or toluene. Appropriate chemical functionalization of these new dyes allows connection to different photoactive subunits (Boranil, BODIPY), endowing an efficient cascade energy transfer.

Facile synthesis of highly fluorescent Boranil complexes.

Complexation of a large variety of Anils (aniline-imines) with boron(III) precursors provides stable Boranils, some of which have been structurally characterized. Analysis of their optical properties reveals that the fluorescence stems from an intraligand charge transfer (ILCT) state with the best quantum yields reaching 90%. Chemistry on the Boranils allows grafting of photoactive modules acting as energy antennae for borondipyrromethene (Bodipy) and subphtalocyanine (SubPc) fluorophores.

TBD-organocatalysed synthesis of pyrazolines.

It was found that TBD, a cheap and commercially available guanidine, easily catalysed the synthesis of biologically important 3,5-diarylpyrazolines from chalcones and acylhydrazines via a selective secondary amine alkylation.