Iron(III) cross-linked hydrogels based on Alteromonas macleodii Mo 169 exopolysaccharide.

Recently, polysaccharide-based hydrogels crosslinked with the trivalent iron cation have attracted interest due to their remarkable properties that include high mechanical stability, stimuli-responsiveness, and enhanced absorptivity. In this study, a Fe3+ crosslinked hydrogel was prepared using the biocompatible extracellular polysaccharide (EPS) secreted by the marine bacterium Alteromonas macleodii Mo169. Hydrogels with mechanical strengths (G') ranging from 0.3 kPa to 44.5 kPa were obtained as a result of the combination of different Fe3+ (0.05-9.95 g L-1) and EPS (0.3-1.7 %) concentrations. All the hydrogels had a water content above 98 %. Three different hydrogels, named HA, HB, and HC, were chosen for further characterization. With strength values (G') of 3.2, 28.9, and 44.5 kPa, respectively, these hydrogels might meet the strength requirements for several specific applications. Their mechanical resistance increased as higher Fe3+ and polymer concentrations were used in their preparation (the compressive hardness increased from 8.7 to 192.1 kPa for hydrogel HA and HC, respectively). In addition, a tighter mesh was noticed for HC, which was correlated to its lower swelling ratio value compared to HA and HB. Overall, this preliminary study highlighted the potential of these hydrogels for tissue engineering, drug delivery, or wound healing applications.

Cryoprotective Polysaccharides with Ordered Gel Structures Induce Ice Growth Anticipation and Survival Enhancement during Cell Cryopreservation.

This work cross-correlated rheological, thermodynamic, and conformational features of several natural polysaccharides to their cryoprotective performance. The basis of cryoprotection of FucoPol, pectin, and agar revealed a causal combination of (i) an emerging sol-gel transition (p = 0.014) at near-hypothermia (4 °C), (ii) noncolligative attenuated supercooling of the kinetic freezing point of water (p = 0.026) supporting ice growth anticipation, and (iii) increased conformational order (p < 0.0001), where helix-/sheet-like features boost cryoprotection. FucoPol, of highest cryoprotective performance, revealed a predominantly helical structure (α/ß = 1.5) capable of forming a gel state at 4 °C and the highest degree of supercooling attenuation (TH = 6.2 °C). Ice growth anticipation with gel-like polysaccharides suggests that the gel matrix neutralizes elastic deformations and lethal cell volumetric fluctuations during freezing, thus preventing the loss of homeostasis and increasing post-thaw viability. Ultimately, structured gels capable of attenuated supercooling enable cryoprotective action at the polymer-cell interface, in addition to polymer-ice interactions. This rationale potentiates implementing alternative, biobased, noncytotoxic polymers in cryobiology.

Polyhydroxyalkanoate Production from Eucalyptus Bark's Enzymatic Hydrolysate.

In recent years, polyhydroxyalkanoates (PHAs) have gained notoriety because of their desirable properties that include proven biodegradability, biocompatibility, and thermal stability, which make them suitable alternatives to fossil-based polymers. However, the widespread use of PHAs is still challenging because of their production costs, which are greatly associated with the cultivation medium used for bacterial cultivation. In Portugal, one-quarter of the forest area is covered by Eucalyptus globulus wood, making its residues a cheap, abundant, and sustainable potential carbon source for biotechnological uses. In this work, eucalyptus bark was used as the sole feedstock for PHA production in a circular bioeconomic approach. Eucalyptus bark hydrolysate was obtained after enzymatic saccharification using Cellic® CTec3, resulting in a sugar-rich solution containing glucose and xylose. Although with differing performances, several bacteria were able to grow and produce PHA with distinct compositions, using the enzymatic hydrolysate as the sole carbon source. Pseudomonas citronellolis NRRL B-2504 achieved a high cellular growth rate in bioreactor assays (24.4 ± 0.15 g/L) but presented a low accumulation of a medium-chain-length PHA (mcl-PHA) comprising the monomers hydroxydecanoate (HD, 65%), hydroxydodecanoate (HDd, 25%), and hydroxytetradecanoate (HTd, 14%). Burkholderia thailandensis E264, on the other hand, reached a lower cellular growth rate (8.87 ± 0.34 g/L) but showed a higher biopolymer accumulation, with a polyhydroxybutyrate (PHB) content in the cells of 12.3 wt.%. The new isolate, Pseudomonas sp., revealed that under nitrogen availability, it was able to reach a higher accumulation of the homopolymer PHB (31 wt.%). These results, although preliminary, demonstrate the suitability of eucalyptus bark's enzymatic hydrolysate as a feedstock for PHA production, thus offering an exciting avenue for achieving sustainable and environmentally responsible plastic products from an undervalued forestry waste.

Elevated fucose content enhances the cryoprotective performance of anionic polysaccharides.

Biological cryopreservation often involves using a cryoprotective agent (CPA) to mitigate lethal physical stressors cells endure during freezing and thawing, but effective CPA concentrations are cytotoxic. Hence, natural polysaccharides have been studied as biocompatible alternatives. Here, a subset of 26 natural polysaccharides of various chemical composition was probed for their potential in enhancing the metabolic post-thaw viability (PTV) of cryopreserved Vero cells. The best performing cryoprotective polysaccharides contained significant fucose amounts, resulting in average PTV 2.8-fold (up to 3.1-fold) compared to 0.8-fold and 2.2-fold for all non-cryoprotective and cryoprotective polysaccharides, respectively, outperforming the optimized commercial CryoStor™ CS5 formulation (2.6-fold). Stoichiometrically, a balance between fucose (18-35.7 mol%), uronic acids (UA) (13.5-26 mol%) and high molecular weight (MW > 1 MDa) generated optimal PTV. Principal component analysis (PCA) revealed that fucose enhances cell survival by a charge-independent, MW-scaling mechanism (PC1), drastically different from the charge-dominated ice growth disruption of UA (PC2). Its neutral nature and unique properties distinguishable from other neutral monomers suggest fucose may play a passive role in conformational adaptability of polysaccharide to ice growth inhibition, or an active role in cell membrane stabilization through binding. Ultimately, fucose-rich anionic polysaccharides may indulge in polymer-ice and polymer-cell interactions that actively disrupt ice and minimize lethal volumetric fluctuations due to a balanced hydrophobic-hydrophilic character. Our research showed the critical role neutral fucose plays in enhancing cellular cryopreservation outcomes, disputing previous assumptions of polyanionicity being the sole governing predictor of cryoprotection.

Exploring Microorganisms from Plastic-Polluted Sites: Unveiling Plastic Degradation and PHA Production Potential.

The exposure of microorganisms to conventional plastics is a relatively recent occurrence, affording limited time for evolutionary adaptation. As part of the EU-funded project BioICEP, this study delves into the plastic degradation potential of microorganisms isolated from sites with prolonged plastic pollution, such as plastic-polluted forests, biopolymer-contaminated soil, oil-contaminated soil, municipal landfill, but also a distinctive soil sample with plastic pieces buried three decades ago. Additionally, samples from Arthropoda species were investigated. In total, 150 strains were isolated and screened for the ability to use plastic-related substrates (Impranil dispersions, polyethylene terephthalate, terephthalic acid, and bis(2-hydroxyethyl) terephthalate). Twenty isolates selected based on their ability to grow on various substrates were identified as Streptomyces, Bacillus, Enterococcus, and Pseudomonas spp. Morphological features were recorded, and the 16S rRNA sequence was employed to construct a phylogenetic tree. Subsequent assessments unveiled that 5 out of the 20 strains displayed the capability to produce polyhydroxyalkanoates, utilizing pre-treated post-consumer PET samples. With Priestia sp. DG69 and Neobacillus sp. DG40 emerging as the most successful producers (4.14% and 3.34% of PHA, respectively), these strains are poised for further utilization in upcycling purposes, laying the foundation for the development of sustainable strategies for plastic waste management.

Ice modulatory effect of the polysaccharide FucoPol in directional freezing.

Directional freezing harnesses crystal growth development to create aligned solid structures or etchable patterns, useful for directed ice growth in cryobiology and cryoprinting for tissue engineering. We have delved into the ice-modulating properties of FucoPol, a fucose-rich, bio-based polysaccharide. Previous research on FucoPol revealed its non-colligative hysteresis in kinetic freezing point, reduced crystal dimensions and cryoprotective effect. Here, FucoPol reshaped developing sharp, anisotropic obloid ice dendrites into linearly-aligned, thin, isotropic spicules or tubules (cooling rate-dependent morphology). The effect was enhanced by increased concentration and decreased cooling rate, but major reshaping was observed with 5 µM and below. These structures boasted remarkable enhancements: uniform alignment (3-fold), tip symmetry (5.9-fold) and reduced thickness (5.3-fold). The ice-modulating capability of FucoPol resembles the Gibbs-Thomson effect of antifreeze proteins, in particular the ice reshaping profiles of type I antifreeze proteins and rattlesnake venom lectins, evidenced by a 52.6 ± 2.2° contact angle (θ) and spicular structure generation. The high viscosity of FucoPol solutions, notably higher than that of sucrose, plays a crucial role. This viscosity dynamically intensifies during directional freezing, leading to a diffusion-limited impediment that influences dendritic formation. Essentially, the ice-modulating prowess of FucoPol not only reinforces its established cryoprotective qualities but also hints at its potential utility in applications that harness advantageous ice growth for intentional structuring. For instance, its potential in cryobioprinting is noteworthy, offering an economical, biodegradable resource, of easy removal, sidestepping the need for toxic reagents. Moreover, FucoPol fine-tunes resulting ice structures, enabling the ice-etching of biologically relevant patterns within biocompatible matrices for advanced tissue engineering endeavors.

Bioprospecting for new exopolysaccharide-producing microalgae of marine origin / Bioprospección de nuevas microalgas de origen marino productoras de exopolisacáridos

Microalgae are photosynthetic organisms that can produce biomolecules with industrial interest, including exopolysaccharides (EPS). Due to their structural and compositional diversity, microalgae EPS present interesting properties that can be considered in cosmetic and/or therapeutic areas. Seven microalgae strains from three different lineages, namely Dinophyceae (phylum Miozoa), Haptophyta, and Chlorophyta, were investigated as EPS producers. All strains were found to be EPS producers, though the highest EPS yield was obtained for Tisochrysis lutea, followed by Heterocapsa sp. (126.8 and 75.8 mg L−1, respectively). Upon assessment of the polymers’ chemical composition, significant contents of unusual sugars, including fucose, rhamnose, and ribose, were found. Heterocapsa sp. EPS stood out due to its high content of fucose (40.9 mol%), a sugar known to confer biological properties to polysaccharides. The presence of sulfate groups (10.6–33.5 wt%) was also noticed in the EPS produced by all microalgae strains, thus contributing to the possibility that these EPS might have biological activities worth exploring.(AU)

Exploring the Drug-Loading and Release Ability of FucoPol Hydrogel Membranes.

The polysaccharide FucoPol has recently been shown to yield hydrogel membranes (HMs) characterized by good mechanical properties, biocompatibility, and anti-inflammatory activity that render them promising biomaterials for use in the biomedical field. Subsequently to such findings, envisaging their development into novel delivery systems for topical applications, in this study, FucoPol HMs prepared by crosslinking the biopolymer with iron cations were loaded with caffeine or diclofenac sodium as model drugs. Two loading methods, namely diffusion and mixing, were applied to evaluate the FucoPol's HM drug-loading capacity and entrapment efficiency. The diffusion method led to a higher caffeine loading (101.9 ± 19.1 mg/g) in the HM1_DCAF membranes, while the mixing method resulted in a higher diclofenac sodium loading (82.3 ± 5.1 mg/g) in the HM1_DDS membranes. The HM1_DCAF membranes were characterized by increased mechanical and rheological parameters, such as their hardness (130.0 ± 5.3 kPa) and storage modulus (1014.9 ± 109.7 Pa), compared to the HM1_DDS membranes that exhibited lower values (7.3 ± 1.2 kPa and 19.8 ± 3.8 Pa, respectively), probably due to leaching occurring during the drug-loading process. The release profiles revealed a fast release of both APIs from the membranes loaded by diffusion, while a prolonged and sustained release was obtained from the membranes loaded by mixing. Moreover, for all API-loaded membranes, the release mechanism followed Fickian diffusion, with the release rate being essentially governed by the diffusion process. These findings, together with their previously shown biological properties, support the suitability of the developed FucoPol HMs to be used as platforms for the topical delivery of drugs.

Microencapsulation via Spray-Drying of Geraniol-Loaded Emulsions Stabilized by Marine Exopolysaccharide for Enhanced Antimicrobial Activity.

The current study investigates the formation of microencapsulated geraniol powder, with the exopolysaccharide EPS-K1B3 produced by Halomonas caseinilytica K1, as wall material, using spray-drying. Evaluation of the antimicrobial activity of the functional emulsions, prepared at either pH 5 or pH 7, was carried out against Gram-positive (Listeria innocua (ATCC 33090)) and Gram-negative (Escherichia coli (DSM682)) bacterial strains. Results showed prolonged antimicrobial efficacy until 30 days of incubation for geraniol microcapsules compared to wet geraniol emulsions, which could confirm the ability of the spray-drying process to protect encapsulated geraniol for a longer period. The highest antimicrobial efficacy of geraniol microcapsules was observed against L. innocua at pH 5. Therefore, the influence of pH on the functional property of geraniol microcapsules could be highlighted beside the targeted bacterial strain.

Novel Hydrogel Membranes Based on the Bacterial Polysaccharide FucoPol: Design, Characterization and Biological Properties.

FucoPol, a fucose-rich polyanionic polysaccharide, was used for the first time for the preparation of hydrogel membranes (HMs) using Fe3+ as a crosslinking agent. This study evaluated the impact of Fe3+ and FucoPol concentrations on the HMs' strength. The results show that, above 1.5 g/L, Fe3+ concentration had a limited influence on the HMs' strength, and varying the FucoPol concentration had a more significant effect. Three different FucoPol concentrations (1.0, 1.75 and 2.5 wt.%) were combined with Fe3+ (1.5 g/L), resulting in HMs with a water content above 97 wt.% and an Fe3+ content up to 0.16 wt.%. HMs with lower FucoPol content exhibited a denser porous microstructure as the polymer concentration increased. Moreover, the low polymer content HM presented the highest swelling ratio (22.3 ± 1.8 g/g) and a lower hardness value (32.4 ± 5.8 kPa). However, improved mechanical properties (221.9 ± 10.2 kPa) along with a decrease in the swelling ratio (11.9 ± 1.6 g/g) were obtained for HMs with a higher polymer content. Furthermore, all HMs were non-cytotoxic and revealed anti-inflammatory activity. The incorporation of FucoPol as a structuring agent and bioactive ingredient in the development of HMs opens up new possibilities for its use in tissue engineering, drug delivery and wound care management.

Preparation of Porous Scaffold Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) and FucoPol.

This work focused on the development of porous scaffolds based on biocomposites comprising two biodegradable and biocompatible biopolymers: a terpolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) (PHBHVHHx), and the bacterial polysaccharide FucoPol. The PHBHVHHx terpolymer was composed of 3-hydroxybutyrate (55 wt%), 3-hydroxyvalerate (21 wt%), and 3-hydroxyhexanoate (24 wt%). This hydrophobic polyester has low crystallinity and can form elastic and flexible films. Fucopol is a fucose-containing water-soluble polysaccharide that forms viscous solutions with shear thinning behavior and has demonstrated emulsion-forming and stabilizing capacity and wound healing ability. Emulsion-templating was used to fabricate PHA-based porous structures in which FucoPol acted as a bioemulsifier. Compared with the scaffolds obtained from emulsions with only water, the use of FucoPol aqueous solutions resulted in structures with improved mechanical properties, namely higher tensile strength (4.4 MPa) and a higher Young's Modulus (85 MPa), together with an elongation at break of 52%. These features, together with the scaffolds' high porosity and pore interconnectivity, suggest their potential to sustain cell adhesion and proliferation, which is further supported by FucoPol's demonstrated wound healing ability. Therefore, the developed PHBHVHHx:FucoPol scaffolds arise as innovative porous bioactive structures with great potential for use in tissue engineering applications.

Bioprospecting for new exopolysaccharide-producing microalgae of marine origin.

Microalgae are photosynthetic organisms that can produce biomolecules with industrial interest, including exopolysaccharides (EPS). Due to their structural and compositional diversity, microalgae EPS present interesting properties that can be considered in cosmetic and/or therapeutic areas. Seven microalgae strains from three different lineages, namely Dinophyceae (phylum Miozoa), Haptophyta, and Chlorophyta, were investigated as EPS producers. All strains were found to be EPS producers, though the highest EPS yield was obtained for Tisochrysis lutea, followed by Heterocapsa sp. (126.8 and 75.8 mg L-1, respectively). Upon assessment of the polymers' chemical composition, significant contents of unusual sugars, including fucose, rhamnose, and ribose, were found. Heterocapsa sp. EPS stood out due to its high content of fucose (40.9 mol%), a sugar known to confer biological properties to polysaccharides. The presence of sulfate groups (10.6-33.5 wt%) was also noticed in the EPS produced by all microalgae strains, thus contributing to the possibility that these EPS might have biological activities worth exploring.

Cosmetic emulsion based on the fucose-rich polysaccharide FucoPol: Bioactive properties and sensorial evaluation.

In this study, the physicochemical characteristics, bioactive properties, and sensorial evaluation of a O/W cosmetic formulation containing FucoPol, a fucose-containing bacterial polysaccharide, were assessed. The stability of the FucoPol-based cream, named F-cream, was demonstrated over a period of 2 months at different temperatures (4, 20 and 30 °C), during which it maintained the organoleptic characteristics and pH (5.88-6.19), with minimal variations on the apparent viscosity. Furthermore, no breaking mechanisms occurred upon centrifuging the samples (accelerated stability test) kept at 4 °C and at 30 °C for 60 days. The F-cream presented a shear-thinning and solid-liquid behavior consistent with its envisaged use for topical applications, proving to be a suitable candidate for an anti-aging application due to its antioxidant capacity and effective photoprotection, maintaining cellular preservation. Moreover, the formulation was proven non-cytotoxic for HaCaT cells at concentrations between 0.78 and 12.5 mg/mL, promoting HFFF2 cell migration (46-70 % of wound closure) at a concentration of 2.5 mg/mL, and HaCaT cell migration at a concentration of 10 mg/mL (95-98 % of wound closure). Upon application over the skin, the F-cream provided a hydration and softness with desired spreadability with no residues after application. These findings show that FucoPol has good potential to be used as a functional and/or active ingredient in cosmetic formulations, forming an emulsified cream with appealing sensorial properties that can act as a moisturizer with photoprotection, antioxidant, and regeneration properties.

Chitin-Glucan Complex Hydrogels: Physical-Chemical Characterization, Stability, In Vitro Drug Permeation, and Biological Assessment in Primary Cells.

Chitin-glucan complex (CGC) hydrogels were fabricated by coagulation of the biopolymer from an aqueous alkaline solution, and their morphology, swelling behavior, mechanical, rheological, and biological properties were studied. In addition, their in vitro drug loading/release ability and permeation through mimic-skin artificial membranes (Strat-M) were assessed. The CGC hydrogels prepared from 4 and 6 wt% CGC suspensions (Na51*4 and Na51*6 hydrogels, respectively) had polymer contents of 2.40 ± 0.15 and 3.09 ± 0.22 wt%, respectively, and displayed a highly porous microstructure, characterized by compressive moduli of 39.36 and 47.30 kPa and storage moduli of 523.20 and 7012.25 Pa, respectively. Both hydrogels had a spontaneous and almost immediate swelling in aqueous media, and a high-water retention capacity (>80%), after 30 min incubation at 37 °C. Nevertheless, the Na51*4 hydrogels had higher fatigue resistance and slightly higher-water retention capacity. These hydrogels were loaded with caffeine, ibuprofen, diclofenac, or salicylic acid, reaching entrapment efficiency values ranging between 13.11 ± 0.49% for caffeine, and 15.15 ± 1.54% for salicylic acid. Similar release profiles in PBS were observed for all tested APIs, comprising an initial fast release followed by a steady slower release. In vitro permeation experiments through Strat-M membranes using Franz diffusion cells showed considerably higher permeation fluxes for caffeine (33.09 µg/cm2/h) and salicylic acid (19.53 µg/cm2/h), compared to ibuprofen sodium and diclofenac sodium (4.26 and 0.44 µg/cm2/h, respectively). Analysis in normal human dermal fibroblasts revealed that CGC hydrogels have no major effects on the viability, migration ability, and morphology of the cells. Given their demonstrated features, CGC hydrogels are very promising structures, displaying tunable physical properties, which support their future development into novel transdermal drug delivery platforms.

Recent Developments in the Biological Activities, Bioproduction, and Applications of Pseudomonas spp. Phenazines.

Phenazines are a large group of heterocyclic nitrogen-containing compounds with demonstrated insecticidal, antimicrobial, antiparasitic, and anticancer activities. These natural compounds are synthesized by several microorganisms originating from diverse habitats, including marine and terrestrial sources. The most well-studied producers belong to the Pseudomonas genus, which has been extensively investigated over the years for its ability to synthesize phenazines. This review is focused on the research performed on pseudomonads' phenazines in recent years. Their biosynthetic pathways, mechanism of regulation, production processes, bioactivities, and applications are revised in this manuscript.

Advancing PHBV Biomedical Potential with the Incorporation of Bacterial Biopigment Prodigiosin.

The quest for sustainable biomaterials with excellent biocompatibility and tailorable properties has put polyhydroxyalkanoates (PHAs) into the research spotlight. However, high production costs and the lack of bioactivity limit their market penetration. To address this, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was combined with a bacterial pigment with strong anticancer activity, prodigiosin (PG), to obtain functionally enhanced PHBV-based biomaterials. The samples were produced in the form of films 115.6-118.8 µm in thickness using the solvent casting method. The effects of PG incorporation on the physical properties (morphology, biopolymer crystallinity and thermal stability) and functionality of the obtained biomaterials were investigated. PG has acted as a nucleating agent, in turn affecting the degree of crystallinity, thermal stability and morphology of the films. All samples with PG had a more organized internal structure and higher melting and degradation temperatures. The calculated degree of crystallinity of the PHBV copolymer was 53%, while the PG1, PG3 and PG3 films had values of 64.0%, 63.9% and 69.2%, respectively. Cytotoxicity studies have shown the excellent anticancer activity of films against HCT116 (colon cancer) cells, thus advancing PHBV biomedical application potential.

Selenium Bio-Nanocomposite Based on Alteromonas macleodii Mo169 Exopolysaccharide: Synthesis, Characterization, and In Vitro Antioxidant Activity.

In this study, the novel exopolysaccharide (EPS) produced by the marine bacterium Alteromonas macleodii Mo 169 was used as a stabilizer and capping agent in the preparation of selenium nanoparticles (SeNPs). The synthesized nanoparticles were well dispersed and spherical with an average particle size of 32 nm. The cytotoxicity of the EPS and the EPS/SeNPs bio-nanocomposite was investigated on human keratinocyte (HaCaT) and fibroblast (CCD-1079Sk) cell lines. No cytotoxicity was found for the EPS alone for concentrations up to 1 g L-1. A cytotoxic effect was only noticed for the bio-nanocomposite at the highest concentrations tested (0.5 and 1 g L-1). In vitro experiments demonstrated that non-cytotoxic concentrations of the EPS/SeNPs bio-nanocomposite had a significant cellular antioxidant effect on the HaCaT cell line by reducing ROS levels up to 33.8%. These findings demonstrated that the A. macleodii Mo 169 EPS can be efficiently used as a stabilizer and surface coating to produce a SeNP-based bio-nanocomposite with improved antioxidant activity.

Rheological characterization of the exopolysaccharide produced by Alteromonas macleodii Mo 169.

Rheology modifiers are essential additives in numerous products in a variety of industries. Due to environmental awareness, consumer-oriented industries are interested in novel natural rheological agents that can replace synthetic chemicals. In this study, the chemical composition and rheological properties of a novel exopolysaccharide (EPS) produced by Alteromonas macleodii Mo 169 were investigated. It was mainly composed of uronic acids (50 mol%) and total carbohydrates were 17 % sulfated. The EPS viscosity increased with concentration, and a non-Newtonian shear thinning behavior was found for concentrations above 0.1 wt%. The elastic and viscous moduli indicated a weak gel-like structure above 0.4 wt%. It maintained its shear thinning behavior and viscoelastic properties in the presence of NaCl and CaCl2 for pH range 5-7 and temperatures up to 55 °C. Though the apparent viscosity decreased at pH 3 and 9 and temperatures above 65 °C, the shear thinning behavior was retained. The viscous and viscoelastic properties were recovered after heating (95 °C) and cooling (0 °C), indicating a good thermal stability and recoverability. After high shear force, the solution recovered original rheological properties within few seconds, demonstrating self-healing properties.

Formulation of the Polysaccharide FucoPol into Novel Emulsified Creams with Improved Physicochemical Properties.

Driven by the customers' growing awareness of environmental issues, the production of topical formulations based on sustainable ingredients is receiving widespread attention from researchers and the industry. Although numerous sustainable ingredients (natural, organic, or green chemistry-derived compounds) have been investigated, there is a lack of comparative studies between conventional ingredients and sustainable alternatives. In this study, olive oil (30 wt.%) and α-tocopherol (2.5 wt.%) containing oil-in-water (O/W) emulsions stabilized with the bacterial fucose-rich polysaccharide FucoPol were formulated envisaging their validation as cosmetic creams. After formula composition design by Response Surface Methodology (RSM), the optimized FucoPol-based emulsion was prepared with 1.5 wt.% FucoPol, 1.5 wt.% cetyl alcohol, and 3.0 wt.% glycerin. The resulting emulsions had an apparent viscosity of 8.72 Pa.s (measured at a shear rate 2.3 s-1) and droplet size and zeta potential values of 6.12 µm and -97.9 mV, respectively, which are within the values reported for cosmetic emulsified formulations. The optimized formulation displayed the desired criterium of a thin emulsion system, possessing the physicochemical properties and the stability comparable to those of commercially available products used in cosmeceutical applications.

Deacetylation and Desuccinylation of the Fucose-Rich Polysaccharide Fucopol: Impact on Biopolymer Physical and Chemical Properties.

FucoPol is an acylated polysaccharide with demonstrated valuable functional properties that include a shear thinning fluid behaviour, a film-forming capacity, and an emulsion forming and stabilizing capacity. In this study, the different conditions (concentration, temperature, and time) for alkaline treatment were investigated to deacylate FucoPol. Complete deacetylation and desuccinylation was achieved with 0.02 M NaOH, at 60 °C for 15 min, with no significant impact on the biopolymer's sugar composition, pyruvate content, and molecular mass distribution. FucoPol depyruvylation by acid hydrolysis was attempted, but it resulted in a very low polymer recovery. The effect of the ionic strength, pH, and temperature on the deacetylated/desuccinylated polysaccharide, d-FucoPol, was evaluated, as well as its emulsion and film-forming capacity. d-FucoPol aqueous solutions maintained the shear thinning behaviour characteristic of FucoPol, but the apparent viscosity decreased significantly. Moreover, contrary to FucoPol, whose solutions were not affected by the media's ionic strength, the d-FucoPol solutions had a significantly higher apparent viscosity for a higher ionic strength. On the other hand, the d-FucoPol solutions were not affected by the pH in the range of 3.6-11.5, while FucoPol had a decreased viscosity for acidic pH values and for a pH above 10.5. Although d-FucoPol displayed an emulsification activity for olive oil similar to that of FucoPol (98 ± 0%) for an oil-to-water ratio of 2:3, the emulsions were less viscous. The d-FucoPol films were flexible, with a higher Young's modulus (798 ± 152 MPa), a stress at the break (22.5 ± 2.5 MPa), and an elongation at the break (9.3 ± 0.7%) than FucoPol (458 ± 32 MPa, 15.5 ± 0.3 MPa and 8.1 ± 1.0%, respectively). Given these findings, d-FucoPol arises as a promising novel biopolymer, with distinctive properties that may render it useful for utilization as a suspending or emulsifier agent, and as a barrier in coatings and packaging films.