Clathrin coats partially preassemble and subsequently bend during endocytosis.

Eukaryotic cells use clathrin-mediated endocytosis to take up a large range of extracellular cargo. During endocytosis, a clathrin coat forms on the plasma membrane, but it remains controversial when and how it is remodeled into a spherical vesicle. Here, we use 3D superresolution microscopy to determine the precise geometry of the clathrin coat at large numbers of endocytic sites. Through pseudo-temporal sorting, we determine the average trajectory of clathrin remodeling during endocytosis. We find that clathrin coats assemble first on flat membranes to 50% of the coat area before they become rapidly and continuously bent, and this mechanism is confirmed in three cell lines. We introduce the cooperative curvature model, which is based on positive feedback for curvature generation. It accurately describes the measured shapes and dynamics of the clathrin coat and could represent a general mechanism for clathrin coat remodeling on the plasma membrane.

Branched actin cortices reconstituted in vesicles sense membrane curvature.

The actin cortex is a complex cytoskeletal machinery that drives and responds to changes in cell shape. It must generate or adapt to plasma membrane curvature to facilitate diverse functions such as cell division, migration, and phagocytosis. Due to the complex molecular makeup of the actin cortex, it remains unclear whether actin networks are inherently able to sense and generate membrane curvature, or whether they rely on their diverse binding partners to accomplish this. Here, we show that curvature sensing is an inherent capability of branched actin networks nucleated by Arp2/3 and VCA. We develop a robust method to encapsulate actin inside giant unilamellar vesicles (GUVs) and assemble an actin cortex at the inner surface of the GUV membrane. We show that actin forms a uniform and thin cortical layer when present at high concentration and distinct patches associated with negative membrane curvature at low concentration. Serendipitously, we find that the GUV production method also produces dumbbell-shaped GUVs, which we explain using mathematical modeling in terms of membrane hemifusion of nested GUVs. We find that branched actin networks preferentially assemble at the neck of the dumbbells, which possess a micrometer-range convex curvature comparable with the curvature of the actin patches found in spherical GUVs. Minimal branched actin networks can thus sense membrane curvature, which may help mammalian cells to robustly recruit actin to curved membranes to facilitate diverse cellular functions such as cytokinesis and migration.

A systematic review and comparison of automated tools for quantification of fibrous networks.

Fibrous networks are essential structural components of biological and engineered materials. Accordingly, many approaches have been developed to quantify their structural properties, which define their material properties. However, a comprehensive overview and comparison of methods is lacking. Therefore, we systematically searched for automated tools quantifying network characteristics in confocal, stimulated emission depletion (STED) or scanning electron microscopy (SEM) images and compared these tools by applying them to fibrin, a prototypical fibrous network in thrombi. Structural properties of fibrin such as fiber diameter and alignment are clinically relevant, since they influence the risk of thrombosis. Based on a systematic comparison of the automated tools with each other, manual measurements, and simulated networks, we provide guidance to choose appropriate tools for fibrous network quantification depending on imaging modality and structural parameter. These tools are often able to reliably measure relative changes in network characteristics, but absolute numbers should be interpreted with care. STATEMENT OF SIGNIFICANCE: Structural properties of fibrous networks define material properties of many biological and engineered materials. Many methods exist to automatically quantify structural properties, but an overview and comparison is lacking. In this work, we systematically searched for all publicly available automated analysis tools that can quantify structural properties of fibrous networks. Next, we compared them by applying them to microscopy images of fibrin networks. We also benchmarked the automated tools against manual measurements or synthetic images. As a result, we give advice on which automated analysis tools to use for specific structural properties. We anticipate that researchers from a large variety of fields, ranging from thrombosis and hemostasis to cancer research, and materials science, can benefit from our work.

Membrane area gain and loss during cytokinesis.

In cytokinesis of animal cells, the cell is symmetrically divided into two. Since the cell's volume is conserved, the projected area has to increase to allow for the change of shape. Here we aim to predict how membrane gain and loss adapt during cytokinesis. We work with a kinetic model in which membrane turnover depends on membrane tension and cell shape. We apply this model to a series of calculated vesicle shapes as a proxy for the shape of dividing cells. We find that the ratio of kinetic turnover parameters changes nonmonotonically with cell shape, determined by the dependence of exocytosis and endocytosis on membrane curvature. Our results imply that controlling membrane turnover will be crucial for the successful division of artificial cells.

Auxin boosts energy generation pathways to fuel pollen maturation in barley.

Pollen grains become increasingly independent of the mother plant as they reach maturity through poorly understood developmental programs. We report that the hormone auxin is essential during barley pollen maturation to boost the expression of genes encoding almost every step of heterotrophic energy production pathways. Accordingly, auxin is necessary for the flux of sucrose and hexoses into glycolysis and to increase the levels of pyruvate and two tricarboxylic (TCA) cycle metabolites (citrate and succinate). Moreover, bioactive auxin is synthesized by the pollen-localized enzyme HvYUCCA4, supporting that pollen grains autonomously produce auxin to stimulate a specific cellular output, energy generation, that fuels maturation processes such as starch accumulation. Our results demonstrate that auxin can shift central carbon metabolism to drive plant cell development, which suggests a direct mechanism for auxin's ability to promote growth and differentiation.

Plant flavones enrich rhizosphere Oxalobacteraceae to improve maize performance under nitrogen deprivation.

Beneficial interactions between plant roots and rhizosphere microorganisms are pivotal for plant fitness. Nevertheless, the molecular mechanisms controlling the feedback between root architecture and microbial community structure remain elusive in maize. Here, we demonstrate that transcriptomic gradients along the longitudinal root axis associate with specific shifts in rhizosphere microbial diversity. Moreover, we have established that root-derived flavones predominantly promote the enrichment of bacteria of the taxa Oxalobacteraceae in the rhizosphere, which in turn promote maize growth and nitrogen acquisition. Genetic experiments demonstrate that LRT1-mediated lateral root development coordinates the interactions of the root system with flavone-dependent Oxalobacteraceae under nitrogen deprivation. In summary, these experiments reveal the genetic basis of the reciprocal interactions between root architecture and the composition and diversity of specific microbial taxa in the rhizosphere resulting in improved plant performance. These findings may open new avenues towards the breeding of high-yielding and nutrient-efficient crops by exploiting their interaction with beneficial soil microorganisms.

More than just a barrier: using physical models to couple membrane shape to cell function.

The correct execution of many cellular processes, such as division and motility, requires the cell to adopt a specific shape. Physically, these shapes are determined by the interplay of the plasma membrane and internal cellular driving factors. While the plasma membrane defines the boundary of the cell, processes inside the cell can result in the generation of forces that deform the membrane. These processes include protein binding, the assembly of protein superstructures, and the growth and contraction of cytoskeletal networks. Due to the complexity of the cell, relating observed membrane deformations back to internal processes is a challenging problem. Here, we review cell shape changes in endocytosis, cell adhesion, cell migration and cell division and discuss how by modeling membrane deformations we can investigate the inner working principles of the cell.

Competing pathways for the invagination of clathrin-coated membranes.

Clathrin-mediated endocytosis is the major pathway by which eukaryotic cells take up extracellular material, but it is still elusive which physical pathways are being taken during membrane invagination. From a continuum point of view, it can be driven by increases in coat stiffness, preferred curvature or line tension. Here we develop a comprehensive theoretical framework that can be solved analytically and that predicts the consequences of these different scenarios. We find that for the case of increasing stiffness or preferred curvature, curvature will be acquired gradually with growth, while for increasing line tension, the lattice must have grown to a certain size before a flat-to-curved transition can occur. At low membrane tension, the critical value for coat stiffness is 30 kBT, for preferred curvature it is 200 nm, and for line tension it is 6 pN. For high membrane tension, critical coat stiffness is 150 kBT and critical preferred curvature is 70 nm. In the mixed case when a coat with finite rigidity but increasing line tension is considered, a cup-to-sphere transition can occur for a line tension of 6 pN. The flat-to-curved and the cup-to-sphere transitions driven by line tension are both suppressed by high membrane tension.

Transcriptomic diversity in seedling roots of European flint maize in response to cold.

BACKGROUND: Low temperatures decrease the capacity for biomass production and lead to growth retardation up to irreversible cellular damage in modern maize cultivars. European flint landraces are an untapped genetic resource for genes and alleles conferring cold tolerance which they acquired during their adaptation to the agroecological conditions in Europe. RESULTS: Based on a phenotyping experiment of 276 doubled haploid lines derived from the European flint landrace "Petkuser Ferdinand Rot" diverging for cold tolerance, we selected 21 of these lines for an RNA-seq experiment. The different genotypes showed highly variable transcriptomic responses to cold. We identified 148, 3254 and 563 genes differentially expressed with respect to cold treatment, cold tolerance and growth rate at cold, respectively. Gene ontology (GO) term enrichment demonstrated that the detoxification of reactive oxygen species is associated with cold tolerance, whereas amino acids might play a crucial role as antioxidant precursors and signaling molecules. CONCLUSION: Doubled haploids representing a European maize flint landrace display genotype-specific transcriptome patterns associated with cold response, cold tolerance and seedling growth rate at cold. Identification of cold regulated genes in European flint germplasm, could be a starting point for introgressing such alleles in modern breeding material for maize improvement.

Forces during cellular uptake of viruses and nanoparticles at the ventral side.

Many intracellular pathogens, such as mammalian reovirus, mimic extracellular matrix motifs to specifically interact with the host membrane. Whether and how cell-matrix interactions influence virus particle uptake is unknown, as it is usually studied from the dorsal side. Here we show that the forces exerted at the ventral side of adherent cells during reovirus uptake exceed the binding strength of biotin-neutravidin anchoring viruses to a biofunctionalized substrate. Analysis of virus dissociation kinetics using the Bell model revealed mean forces higher than 30 pN per virus, preferentially applied in the cell periphery where close matrix contacts form. Utilizing 100 nm-sized nanoparticles decorated with integrin adhesion motifs, we demonstrate that the uptake forces scale with the adhesion energy, while actin/myosin inhibitions strongly reduce the uptake frequency, but not uptake kinetics. We hypothesize that particle adhesion and the push by the substrate provide the main driving forces for uptake.

Dynamics of particle uptake at cell membranes.

Receptor-mediated endocytosis requires that the energy of adhesion overcomes the deformation energy of the plasma membrane. The resulting driving force is balanced by dissipative forces, leading to deterministic dynamical equations. While the shape of the free membrane does not play an important role for tensed and loose membranes, in the intermediate regime it leads to an important energy barrier. Here we show that this barrier is similar to but different from an effective line tension and suggest a simple analytical approximation for it. We then explore the rich dynamics of uptake for particles of different shapes and present the corresponding dynamical state diagrams. We also extend our model to include stochastic fluctuations, which facilitate uptake and lead to corresponding changes in the phase diagrams.

QTL mapping and genome-wide prediction of heat tolerance in multiple connected populations of temperate maize.

Climate change will lead to increasing heat stress in the temperate regions of the world. The objectives of this study were the following: (I) to assess the phenotypic and genotypic diversity of traits related to heat tolerance of maize seedlings and dissect their genetic architecture by quantitative trait locus (QTL) mapping, (II) to compare the prediction ability of genome-wide prediction models using various numbers of KASP (Kompetitive Allele Specific PCR genotyping) single nucleotide polymorphisms (SNPs) and RAD (restriction site-associated DNA sequencing) SNPs, and (III) to examine the prediction ability of intra-, inter-, and mixed-pool calibrations. For the heat susceptibility index of five of the nine studied traits, we identified a total of six QTL, each explaining individually between 7 and 9% of the phenotypic variance. The prediction abilities observed for the genome-wide prediction models were high, especially for the within-population calibrations, and thus, the use of such approaches to select for heat tolerance at seedling stage is recommended. Furthermore, we have shown that for the traits examined in our study, populations created from inter-pool crosses are suitable training sets to predict populations derived from intra-pool crosses.

Stochastic Dynamics of Nanoparticle and Virus Uptake.

The cellular uptake of nanoparticles or viruses requires that the gain of adhesion energy overcomes the cost of plasma membrane bending. It is well known that this leads to a minimal particle size for uptake. Using a simple deterministic theory for this process, we first show that, for the same radius and volume, cylindrical particles should be taken up faster than spherical particles, both for normal and parallel orientations. We then address stochastic effects, which are expected to be relevant due to small system size, and show that, now, spherical particles can have a faster uptake because the mean first passage time profits from the multiplicative noise induced by the spherical geometry. We conclude that stochastic effects are strongly geometry dependent and may favor spherical shapes during adhesion-driven particle uptake.

Proteomics of Maize Root Development.

Maize forms a complex root system with structurally and functionally diverse root types that are formed at different developmental stages to extract water and mineral nutrients from soil. In recent years proteomics has been intensively applied to identify proteins involved in shaping the three-dimensional architecture and regulating the function of the maize root system. With the help of developmental mutants, proteomic changes during the initiation and emergence of shoot-borne, lateral and seminal roots have been examined. Furthermore, root hairs were surveyed to understand the proteomic changes during the elongation of these single cell type structures. In addition, primary roots have been used to study developmental changes of the proteome but also to investigate the proteomes of distinct tissues such as the meristematic zone, the elongation zone as well as stele and cortex of the differentiation zone. Moreover, subcellular fractions of the primary root including cell walls, plasma membranes and secreted mucilage have been analyzed. Finally, the superior vigor of hybrid seedling roots compared to their parental inbred lines was studied on the proteome level. In summary, these studies provide novel insights into the complex proteomic interactions of the elaborate maize root system during development.

Clathrin-adaptor ratio and membrane tension regulate the flat-to-curved transition of the clathrin coat during endocytosis.

Although essential for many cellular processes, the sequence of structural and molecular events during clathrin-mediated endocytosis remains elusive. While it was long believed that clathrin-coated pits grow with a constant curvature, it was recently suggested that clathrin first assembles to form flat structures that then bend while maintaining a constant surface area. Here, we combine correlative electron and light microscopy and mathematical growth laws to study the ultrastructural rearrangements of the clathrin coat during endocytosis in BSC-1 mammalian cells. We confirm that clathrin coats initially grow flat and demonstrate that curvature begins when around 70% of the final clathrin content is acquired. We find that this transition is marked by a change in the clathrin to clathrin-adaptor protein AP2 ratio and that membrane tension suppresses this transition. Our results support the notion that BSC-1 mammalian cells dynamically regulate the flat-to-curved transition in clathrin-mediated endocytosis by both biochemical and mechanical factors.

Multiscale modeling of virus replication and spread.

Replication and spread of human viruses is based on the simultaneous exploitation of many different host functions, bridging multiple scales in space and time. Mathematical modeling is essential to obtain a systems-level understanding of how human viruses manage to proceed through their life cycles. Here, we review corresponding advances for viral systems of large medical relevance, such as human immunodeficiency virus-1 (HIV-1) and hepatitis C virus (HCV). We will outline how the combination of mathematical models and experimental data has advanced our quantitative knowledge about various processes of these pathogens, and how novel quantitative approaches promise to fill remaining gaps.

First steps to understand heat tolerance of temperate maize at adult stage: identification of QTL across multiple environments with connected segregating populations.

KEY MESSAGE: Dents were more heat tolerant than Flints. QTL for heat tolerance with respect to grain yield at field conditions were identified considering multiple populations and environments. High temperatures have the potential to cause severe damages to maize production. This study aims to elucidate the genetic mechanisms of heat tolerance under field conditions in maize and the genome regions contributing to natural variation. In our study, heat tolerance was assessed on a multi-environment level under non-controlled field conditions for a set of connected intra- and interpool Dent and Flint populations. Our findings indicate that Dent are more heat tolerant during adult stage than Flint genotypes. We identified 11 quantitative trait loci (QTL) including 2 loci for heat tolerance with respect to grain yield. Furthermore, we identified six heat-tolerance and 112 heat-responsive candidate genes colocating with the previously mentioned QTL. To investigate their contribution to the response to heat stress and heat tolerance, differential expression and sequence variation of the identified candidate genes should be subjected to further research.

Novel Bone-Anchored Vascular Access on the Mastoid for Hemodialysis: Concept and Preclinical Trials.

GOAL: We present the development of a bone-anchored port for the painless long-term hemodialytic treatment of patients with renal failure. This port is implanted behind the ear. METHODS: The port was developed based on knowledge obtained from long-term experience with implantable hearing devices, which are firmly anchored to the bone behind the ear. This concept of bone anchoring was adapted to the requirements for a vascular access during hemodialysis. The investigational device is comprised of a base plate that is firmly fixed with bone screws to the bone behind the ear (temporal bone). A catheter leads from the base plate valve block through the internal jugular vein and into the right atrium. The valves are opened using a special disposable adapter, without any need to puncture the blood vessels. Between hemodialysis sessions, the port is protected with a disposable cover. RESULTS: Flow rate, leak tightness, and purification were tested on mockups. Preoperative planning and the surgical procedure were verified in 15 anatomical human whole head specimens. CONCLUSION: Preclinical evaluations demonstrated the technical feasibility and safety of the investigational device. SIGNIFICANCE: Approximately 1.5 million people are treated with hemodialysis worldwide, and 25% of the overall cost of dialysis therapy results from vascular access problems. New approaches toward enhancing vascular access could potentially reduce the costs and complications of hemodialytic therapy.

[A new bone anchored hemodialysis access]. / Neuartiger knochenverankerter Hämodialysezugang.

When classic arteriovenous fistulas or grafts fail, dialysis patients have a vital requirement for a catheter to ensure vascular access. Permanent central venous catheters penetrate the cervical and thoracic soft tissues and the skin without rigid fixation. The infection rate for such devices is high, often requiring explantation. Bone anchored hearing aids are an established treatment in patients with conductive hearing loss. The implant is firmly fixed on the temporal bone and the abutment permanently penetrates the skin. Severe infections requiring explantation are very rare. We suppose that one of the main reasons for the low complication rate is the firm fixation of the implant to the temporal bone, which minimizes the movement of the skin relative to the underlying bone. Based on the experience with implantable hearing devices we developed a percutaneous bone anchored port fixed to the skull in the region of the temporal bone. Such a bone anchored port could be a beneficial alternative to conventional central venous catheters for patients undergoing hemodialysis. In the course of the development process we investigated the individual anatomy to locate the correct implantation site with sufficient bone thickness; we studied screw stability in bone; we developed the titanium implant that houses the port system as well as the surgical tools and procedure for save implantation; we tested flow rate, leak tightness and purification on mockups; we defined the Seldinger-insertion of the catheter into the internal jugular vein via a small neck incision. Our results show the technical feasibility of a temporal bone anchored port and form the basis of a now-approved clinical pilot study.

Genome-wide expression profiling and phenotypic evaluation of European maize inbreds at seedling stage in response to heat stress.

BACKGROUND: Climate change will lead in the future to an occurrence of heat waves with a higher frequency and duration than observed today, which has the potential to cause severe damage to seedlings of temperate maize genotypes. In this study, we aimed to (I) assess phenotypic variation for heat tolerance of temperate European Flint and Dent maize inbred lines, (II) investigate the transcriptomic response of temperate maize to linearly increasing heat levels and, (III) identify genes associated with heat tolerance in a set of genotypes with contrasting heat tolerance behaviour. RESULTS: Strong phenotypic differences with respect to heat tolerance were observed between the examined maize inbred lines on a multi-trait level. We identified 607 heat responsive genes as well as 39 heat tolerance genes. CONCLUSION: Our findings indicate that individual inbred lines developed different genetic mechanisms in response to heat stress. We applied a novel statistical approach enabling the integration of multiple genotypes and stress levels in the analysis of abiotic stress expression studies.