RESUMO
This report presents liquid metal-based infrared-modulating materials and systems with multiple modes to regulate the infrared reflection. Inspired by the brightness adjustment in chameleon skin, shape-morphing liquid metal droplets in silicone elastomer (Ecoflex) matrix are used to resemble the dispersed "melanophores". In the system, Ecoflex acts as hormone to drive the deformation of liquid metal droplets. Both total and specular reflectance-based infrared camouflage are achieved. Typically, the total and specular reflectances show change of ~44.8% and 61.2%, respectively, which are among the highest values reported for infrared camouflage. Programmable infrared encoding/decoding is explored by adjusting the concentration of liquid metal and applying areal strains. By introducing alloys with different melting points, temperature-dependent infrared painting/writing can be achieved. Furthermore, the multi-layered structure of infrared-modulating system is designed, where the liquid metal-based infrared modulating materials are integrated with an evaporated metallic film for enhanced performance of such system.
RESUMO
Phototaxis phenomenon is fundamental and critical for optical manipulation of micro-objects. Here, we report the size-dependent negative or positive phototaxis behaviors for microdroplets containing interfacial energy absorber flying in a laser. The critical diameters for such negative-to-positive turnover are studied through both experiments and simulation with different liquids and absorbers, which establishes the mechanism and reveals the role of both the liquid and the absorber inside the microdroplets. This study offers new insight for the manipulation of the phototaxis behavior of micro-objects, showing potential applications in optical trapping and transporting systems that involve light-microdroplet interactions.
RESUMO
The octopus, as one of the most famous celebrities in bionics, has provided various inspirations for camouflage materials, soft-bodied robots, and flexible grabbers. The miniaturization of such structures will help the development of microrobots, microdelivery of drugs, and surface coating. With the lack of relevant effective preparation approaches, however, the generation of such octopus-like structures with a size of â¼1 µm or below is challenging. Here, we develop an approach based on laser-microdroplet interaction for generating an octopus-like structure with a size of â¼1 µm. The developed approach uses laser-microdroplet interaction to provide a large driving force of â¼107 Pa at a confined space (<1 µm), locally crumpling the precursor in the microdroplet. The locally crumpled particles possess both crumpled and uncrumpled structures that resemble an octopus's head and soft body. In the adhesion test, the octopus-like particles exhibit high adhesive properties in air, in water, and on a flexible substrate. In the electrochemical test, the octopus-like particles on flexible electrodes show good electrochemical and adhesive properties under hundreds of bending cycles. Benefiting from the combination of crumpled and uncrumpled morphologies, the created particles with octopus-like microstructure are demonstrated to possess comprehensive performance, exhibiting wide application potentials in the fields of microswimmers, surface coatings, and electrochemistry. Additionally, the method developed in this work has the advantages of concentrated energy in a confined space, displaying prospective potentials in micro- and nanoprocessing.
RESUMO
Control of convection plays an important role in heat transfer regulation, bio/chemical sensing, phase separation, etc. Current convection controlling systems generally depend on engineered energy sources to drive and manipulate the convection, which brings additional energy consumption into the system. Here the use of human hand as a natural and sustainable infrared (IR) radiation source for the manipulation of liquid convection is demonstrated. The fluid can sense the change of the relative position or the shape of the hand with the formation of different convection patterns. Besides the generation of static complex patterns, dynamic manipulation of convections can also be realized via moving of hand or finger. The use of such sustainable convections to control the movement of a floating "boat" is further achieved. The use of human hands as the natural energy sources provides a promising approach for the manipulation of liquid convection without the need of extra external energy, which may be further utilized for low-cost and intelligent bio/chemical sensing and separation.
Assuntos
Convecção , Temperatura Alta , Humanos , Raios InfravermelhosRESUMO
In this paper, multiresponsive actuators based on asymmetric design of graphene-conjugated poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) gradient films have been developed by a simple drop casting method. The biomimetic actuation is attributed to the hygroscopic expansion property of PEDOT:PSS and the gradient distribution of graphene sheets within the film, which resembles the hierarchical swelling tissues of some plants in nature. Graphene-conjugated PEDOT:PSS (GCP) actuators exhibit reversible bending behavior under multistimuli such as moisture, organic vapor, electrothermal, and photothermal heating. Noticeably, the bending curvature reaches 2.15 cm-1 under applied voltage as low as 1.5 V owing to the high electrical conductivity of GCP actuator. To mimic the motions of nyctinastic plants, a GCP artificial flower that spreads its petals under sunlight illumination has been fabricated. GCP actuators have been also demonstrated as intelligent light-controlled switches for light-emitting diodes and smart curtains for thermal management. Not only do the GCP gradient films exhibit potential applications in flexible electronics and energy harvesting/storage devices but also the facile fabrication of multiresponsive GCP actuators may shed light on the development of soft robotics, artificial muscles, wearable electronics, and smart sensors.
RESUMO
The regulation and utilization of thermal energy is increasingly important in modern society due to the growing demand for heating and cooling in applications ranging from buildings, to cooling high power electronics, and from personal thermal management to the pursuit of renewable thermal energy technologies. Over billions of years of natural selection, biological organisms have evolved unique mechanisms and delicate structures for efficient and intelligent regulation and utilization of thermal energy. These structures also provide inspiration for developing advanced thermal engineering materials and systems with extraordinary performance. In this review, we summarize research progress in biological and bioinspired thermal energy materials and technologies, including thermal regulation through insulation, radiative cooling, evaporative cooling and camouflage, and conversion and utilization of thermal energy from solar thermal radiation and biological bodies for vapor/electricity generation, temperature/infrared sensing, and communication. Emphasis is placed on introducing bioinspired principles, identifying key bioinspired structures, revealing structure-property-function relationships, and discussing promising and implementable bioinspired strategies. We also present perspectives on current challenges and outlook for future research directions. We anticipate that this review will stimulate further in-depth research in biological and bioinspired thermal energy materials and technologies, and help accelerate the growth of this emerging field.
Assuntos
Materiais Biomiméticos , Eletrônica , Gases , Calefação , Energia RenovávelRESUMO
Soft materials tend to be highly permeable to gases, making it difficult to create stretchable hermetic seals. With the integration of spacers, we demonstrate the use of liquid metals, which show both metallic and fluidic properties, as stretchable hermetic seals. Such soft seals are used in both a stretchable battery and a stretchable heat transfer system that involve volatile fluids, including water and organic fluids. The capacity retention of the battery was ~72.5% after 500 cycles, and the sealed heat transfer system showed an increased thermal conductivity of approximately 309 watts per meter-kelvin while strained and heated. Furthermore, with the incorporation of a signal transmission window, we demonstrated wireless communication through such seals. This work provides a route to create stretchable yet hermetic packaging design solutions for soft devices.
RESUMO
Films with micro/nanostructures that show high wicking performance are promising in water desalination, atmospheric water harvesting, and thermal energy management systems. Here, we use a facile bubble-induced self-assembly method to directly generate films with a nanoengineered crack-like surface on the substrate during bubble growth when self-dispersible graphene quantum dot (GQD) nanofluid is used as the working medium. The crack-like micro/nanostructure, which is generated due to the thermal stress, enables the GQD film to not only have superior capillary wicking performance but also provide many additional nucleation sites. The film demonstrates enhanced phase change-based heat transfer performance, with a simultaneous enhancement of the critical heat flux and heat transfer coefficient up to 169% and 135% over a smooth substrate, respectively. Additionally, the GQD film with high stability enables a performance improvement in the concentration ratio and electrical efficiency of concentrated photovoltaics in an analytical study, which is promising for high-power thermal energy management applications.
RESUMO
In this work, we observed size-dependent behavior of filler on both the thermal and electrical conductivities of nacre-like graphene-conjugated conducting polymer films and demonstrated the display of apparent Wiedemann-Franz law and tunability of Lorenz constant in such films. The maximum thermal and electrical conductivities of as-fabricated films can reach over 73 W·m-1·K-1 and 1200 S·cm-1, respectively. Furthermore, the maximum value of electromagnetic interference shielding reaches 54 dB with SSE/t over 16000 dB·cm2·g-1. These films can not only show high-quality electromagnetic interference shielding performance with small thickness and low filler ratio but also achieve simultaneous thermal management during electromagnetic shielding. The findings in this work offer new insight into designing flexible graphene-conjugated polymers with customizable thermal and electrical properties in the broad fields of thermal management systems, electromagnetic defense systems, and flexible electronic systems.
RESUMO
This report presents nanoparticles composed of a liquid gallium core with a reduced graphene oxide (RGO) shell (Ga@RGO) of tunable thickness. The particles are produced by a simple, one-pot nanoprobe sonication method. The high near-infrared absorption of RGO results in a photothermal energy conversion of light to heat of 42.4%. This efficient photothermal conversion, combined with the large intrinsic thermal expansion coefficient of liquid gallium, allows the particles to be used for photoacoustic imaging, that is, conversion of light into vibrations that are useful for imaging. The Ga@RGO results in fivefold and twofold enhancement in photoacoustic signals compared with bare gallium nanoparticles and gold nanorods (a commonly used photoacoustic contrast agent), respectively. A theoretical model further reveals the intrinsic factors that affect the photothermal and photoacoustic performance of Ga@RGO. These core-shell Ga@RGO nanoparticles not only can serve as photoacoustic imaging contrast agents but also pave a new way to rationally design liquid metal-based nanomaterials with specific multi-functionality for biomedical applications.
Assuntos
Gálio , Grafite , Nanopartículas , Técnicas Fotoacústicas , Meios de Contraste , Ouro , Técnicas Fotoacústicas/métodos , Fototerapia/métodosRESUMO
Noncontact human-machine interaction provides a hygienic and intelligent approach for the communication between human and robots. Current noncontact human-machine interactions are generally limited by the interaction distance or conditions, such as in the dark. Here we explore the utilization of hand as an infrared light source for noncontact human-machine interaction. Metallic gratings are used as the human-machine interface to respond to infrared radiation from hand and the generated signals are visualized as different infrared structural colors. We demonstrate the applications of the infrared structural color-based human-machine interaction for user-interactive touchless display and real-time control of a robot vehicle. The interaction is flexible to the hand-interface distance ranging from a few centimeters to tens of centimeters and can be used in low lighting condition or in the dark. The findings in this work provide an alternative and complementary approach to traditional noncontact human-machine interactions, which may further broaden the potential applications of human-machine interaction.
Assuntos
Comunicação , Mãos , HumanosRESUMO
This paper studies the impact of hot pressing on the electrical and thermal performance of thick (thickness >5 µm) conducting polymer poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films after acid treatment. Thick conducting polymer films usually exhibit low electrical and thermal conductivities similar to bulk polymer because charge and heat carriers are easily scattered by the irregular arrangement of crystalline domains inside the polymer. In this work, the in-plane electrical conductivity of thick hot-pressed PEDOT:PSS film exceeded 1500 S/cm, and 50% enhancement was obtained in comparison with its non-hot-pressed counterparts. Its in-plane thermal conductivity reached as high as 1.11 W/mK (improved by almost 100% compared to acid-treated PEDOT:PSS films), which is comparable to that of some commercial thermal pads. Such electrical and thermal enhancement via the hot-pressing process is attributed to the optimized morphology and microstructures, which provide short paths for thermal and electrical transportation. We have also demonstrated that the hot-pressed PEDOT:PSS films could be potentially utilized as a flexible conductor and heat spreader for application in flexible electronics and thermal management, respectively. This study not only offers a new insight into the process-property relationship for conducting polymers but also further enables the use of PEDOT:PSS films with simultaneously improved electrical and thermal performance in practical applications, such as thermal management for organic electrodes in batteries, flexible electronics, soft robotics, and bioelectronics.
RESUMO
This paper reports an interfacial evaporation-driven approach for self-assembly of a gold nanoparticle (AuNP) film at the interface of liquid/air. We have designed colloidal plasmonic AuNPs capped with different types and surface coverage densities of ligands (i.e. purified and unpurified oleylamine-capped or thiol-protected AuNPs) and studied the impact of surface chemistry on the self-assembly of AuNPs using the optically excited plasmonic heating effect. By employing the extended DerjaguinLandau-Verwey-Overbeek model, the calculated lowest potential energies of the assembled AuNPs capped with purified oleylamine or alkyl thiols are between -1 kBT and -2 kBT, which is close to the room temperature thermal energy and represents a meta-stable assembly, indicating the reversible self-assembly of the AuNP film observed from the experiment. Furthermore, we observed the superheating phenomenon in well-dispersed nanoparticle solution while normal boiling occurred in the solutions with AuNP assemblies. The SERS activity of the as-prepared AuNP film has also been studied using rhodamine 6G as a molecular probe. This work not only provides a new aspect of the boiling phenomena of optically heated colloidal plasmonic nanoparticle solutions, but also provides inspiration for a new approach in designing surface ligands on the nanoparticles to realize reversible self-assembly via interfacial evaporation.
RESUMO
We demonstrate a rapid one-step scalable microwave heating-based method to prepare Ti3C2Tx MXenes, which shortens the synthesis time from tens of hours for state-of-the-art approaches to 15 minutes and avoids time-consuming delamination with organic compounds. Noticeably, the microwave-synthesized MXene nanosheets have a tailorable size, a stable colloidal dispersion, high electrical conductivity and superior near-infrared (NIR) photothermal conversion performance.
RESUMO
With the increasing pursuit of intelligent systems, the integration of human components into functional systems provides a promising route to the ultimate human-compatible intelligent systems. In this work, we explored the integration of the human hand as the powerless and multiplexed infrared (IR) light source in different functional systems. With the spontaneous IR radiation, the human hand provides a different option as an IR light source. Compared to engineered IR light sources, the human hand brings sustainability with no need of external power and also additional level of controllability to the functional systems. Besides the whole hand, each finger of the hand can also independently provide IR radiation, and the IR radiation from each finger can be selectively diffracted by specific gratings, which helps the hand serve as a multiplexed IR light source. Considering these advantages, we show that the human hand can be integrated into various engineered functional systems. The integration of hand in an encryption/decryption system enables both unclonable and multilevel information encryption/decryption. We also demonstrate the use of the hand in complex signal generation systems and its potential application in sign language recognition, which shows a simplified recognition process with a high level of accuracy and robustness. The use of the human hand as the IR light source provides an alternative sustainable solution that will not only reduce the power used but also help move forward the effort in the integration of human components into functional systems to increase the level of intelligence and achieve ultimate control of these systems.
Assuntos
Mãos/fisiologia , Raios Infravermelhos , Interface Usuário-Computador , Segurança Computacional , Humanos , Tecnologia da InformaçãoRESUMO
Ethylene glycol (EG) nanofluids have been intensively explored as one of the most promising solid-liquid phase change materials for subzero cold thermal energy storage (CTES). However, the prepared nanofluids usually suffer from a large supercooling degree, a long freezing period, reduced storage capacity and poor dispersion stability. Herein, we overcome these issues by developing stable EG nanofluids that are uniformly dispersed with low concentrations of monolayer ethanol-wetted graphene oxide nanosheets. The homogeneously dispersed monolayer sheet not only improves the thermal conductivity of the nanofluids (12.1%) but also provides the heterogeneous nucleation sites to trigger the crystal formation, thereby shortening the freezing time and reducing the supercooling degree. Compared with the base fluid, the nanofluids have reduced the supercooling degree by 87.2%, shortened the freezing time by 78.2% and maintained 98.5% of the latent heat. Moreover, the EG nanofluids have retained their initial stable homogeneous dispersion after repeated freezing/melting for 50 cycles, which ensures consistent CTES behavior during long-period operations. The facile preparation process, low loading requirement and consistent superior thermophysical properties would make the EG nanofluids loaded with monolayer graphene oxide sheets promising coolants for high-performance phase change-based CTES.
RESUMO
Solar energy as an abundant renewable resource has been investigated for many years. Solar thermoelectric conversion technology, which converts solar energy into thermal energy and then into electricity, has been developed and implemented in many important fields. The operation of solar-thermal-electric conversion systems, however, is strongly affected by the intermittency of solar radiation, which requires installation of thermal storage subsystems. In this work, we demonstrated a new solar-thermal-electric conversion system that consists of a thermoelectric converter and a rapidly charging thermal storage subsystem. A magnetic-responsive solar-thermal mesh was used as the movable charging source to convert incident concentrated sunlight into high-temperature heat, which can induce solid-to-liquid phase transition of molten salts. Driven by the external magnetic field, the solar-thermal mesh can move together with the receding solid-liquid interface thus rapidly storing the harvested solar-thermal energy within the molten salts. By connecting with a thermoelectric generator, the harvested solar-thermal energy can be further converted into electricity with a solar-thermal-electric energy conversion efficiency up to 2.56%, and the converted electrical energy can simultaneously light up more than 40 orange-colored LEDs. In addition to stable operation under sunlight, the charged thermal storage subsystem can release the stored heat and thus enables the solar-thermal-electric system to continuously generate electricity after removal of solar illumination.
RESUMO
A simple, fast, and contactless alternative for the generation of nanodroplets in solution is to apply light to stimulate their formation at a surface. In this work, a light-driven mechanism for the generation of nanodroplets is demonstrated by using a porous membrane. The membrane is placed at the interface between oil and water during the nanodroplet generation process. As light illuminates the membrane a photothermal conversion process induces the growth and release of water vapor bubbles into the aqueous phase. This release leads to the fluctuation of local pressure around the pores and enables the generation of oil nanodroplets. A computational simulation of the fluid dynamics provides insight into the underlying mechanism and the extent to which it is possible to increase nanodroplet concentrations. The ability to form nanodroplets in solutions without the need for mechanical moving parts is significant for the diverse biomedical and chemical applications of these materials.
RESUMO
Solar-driven interfacial evaporation has received increasing research attention for clean water generation, but freshwater harvesting often occurs only during daytime. Herein, we report a strategy for all-day freshwater harvesting through combining solar-driven interfacial desalination and dew water generation. Through spray-coating carbon nanotubes onto a flexible substrate that has high-infrared emittance in the atmosphere window, a dual functional film was prepared to efficiently absorb solar energy for desalination at daytime and passively cool down the surface temperature to collect dew water at night. By integrating the dual functional film within a three-stage membrane distillation device, the home-made system achieved a drinkable freshwater collection efficiency of 71.1% when desalinating seawater under 1 sun illumination and achieved a dew water collection rate of 0.1 L m-2 day-1 at night. The readily available low-cost raw materials, simple fabrication process of the dual functional films, and the resultant all-day freshwater collection systems make the combined solar-thermal interfacial desalination and dew water collection a promising solution to alleviate the freshwater shortage in many underdeveloped regions, arid areas, and islands.
RESUMO
Discrete droplet transport has drawn much interest in a broad range of applications. Controlling the motion direction in droplet transport, however, is a long-lasting challenge. In this work, a simple yet efficient approach is demonstrated to realize the motion of droplets with directional control on nanostructured surfaces with predefined channels. Light is used as the external stimulus to induce the uneven thermal expansion of the substrate, which leads to the tilting of nanostructured channels so that the droplet is driven to move along the channel. Due to the easy manipulation of light, including both the light position and power density, this study demonstrates the controllable entrance of static water droplets into targeted channels and the simultaneous control of the motion of multiple droplets in multi-channel systems, using just one light source. Besides static droplets, this approach can also be applied for the directional control of moving droplets in multi-channel systems. As a proof-of-concept, such an approach has been utilized for efficient multiplexed reactions for chemical sensing or microreactor applications. This work offers an alternative approach for the manipulation of droplet movement in applications that involve the control of droplet motion.