RESUMO
As an efficient and environmental-friendly strategy, electrocatalytic oxidation can realize biomass lignin valorization by cleaving its aryl ether bonds to produce value-added chemicals. However, the complex and polymerized structure of lignin presents challenges in terms of reactant adsorption on the catalyst surface, which hinders further refinement. Herein, NiCo-based metal-organic frameworks (MOFs) are employed as the electrocatalyst to enhance the adsorption of reactant molecules through π-π interaction. More importantly, lattice strain is introduced into the MOFs via curved ligand doping, which enables tuning of the d-band center of metal active sites to align with the reaction intermediates, leading to stronger adsorption and higher electrocatalytic activity toward bond cleavage within lignin model compounds and native lignin. When 2'-phenoxyacetophenone is utilized as the model compound, high yields of phenol (76.3%) and acetophenone (21.7%) are achieved, and the conversion rate of the reactants reaches 97%. Following pre-oxidation of extracted poplar lignin, >10 kinds of phenolic compounds are received using the as-designed MOFs electrocatalyst, providing ≈12.48% of the monomer, including guaiacol, vanillin, eugenol, etc., and p-hydroxybenzoic acid dominates all the products. This work presents a promising and deliberately designed electrocatalyst for realizing lignin valorization, making significant strides for the sustainability of this biomass resource.
RESUMO
Palladium hydride (PdHx) is one of the well-known electrocatalytic materials, yet its synthesis is still a challenge through an energy-efficient and straightforward method. Herein, we propose a new and facile cyanogel-assisted synthesis strategy for the preparation of PdH0.649 at a mild environment with NaBH4 as the hydrogen source. Unlike traditional inorganic Pd precursors, the unique Pd-CN-Pd bridge in Pdx[Pd(CN)4]y â aH2O cyanogel offers more favourable spatial sites for insertion of H atoms. The characteristic three-dimensional backbone of cyanogel also acts as a support scaffold resulting in the interconnected network structure of PdH0.649. Due to the incorporation of H atoms and interconnected network structure, the PdH0.649 achieves a high half-wave potential of 0.932â V, a high onset potential of 1.062â V, and a low activation energy, as well as a long-term lifetime for oxygen reduction reaction. Theoretical calculation demonstrates a downshift of the d-band centre of Pd in PdH0.649 owing to the dominant Pd-H incorporation that weakens the binding energies of the *OH intermediate species. Zn-air batteries (ZAB) based on PdH0.649 exhibits high power density, competitive open circuit voltage, and good stability, exceeding that of commercial Pt black. This work not only opens up a new avenue for the development of high-efficiency Pt-free catalysts but also provides an original approach and insight into the synthesis of PdHx.
RESUMO
Developing cost-effective and high-performance electrocatalysts for oxygen reduction reaction (ORR) is critical for clean energy generation. Here, we propose an approach to the synthesis of iron phthalocyanine nanotubes (FePc NTs) as a highly active and selective electrocatalyst for ORR. The performance is significantly superior to FePc in randomly aggregated and molecularly dispersed states, as well as the commercial Pt/C catalyst. When FePc NTs are anchored on graphene, the resulting architecture shifts the ORR potentials above the redox potentials of Fe2+/3+ sites. This does not obey the redox-mediated mechanism operative on conventional FePc with a Fe2+-N moiety serving as the active sites. Pourbaix analysis shows that the redox of Fe2+/3+ sites couples with HO- ions transfer, forming a HO-Fe3+-N moiety serving as the ORR active sites under the turnover condition. The chemisorption of ORR intermediates is appropriately weakened on the HO-Fe3+-N moiety compared to the Fe2+-N state and thus is intrinsically more ORR active.
RESUMO
In response to the challenges of intermediate poisoning and the high cost of noble metal catalysts in the hydrogen evolution reaction (HER), we develop a Ru-doped SnO2 catalyst. This Ru-SnO2 catalyst has the characteristics of low Ru loading and a hollow structure, which endow it with good electrocatalytic activity and stability for the HER.
RESUMO
The active-site density, intrinsic activity, and durability of Pd-based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd2 O3 , Sm2 O3 , Eu2 O3 , and CeO2 ) by using RE metal-organic frameworks to tune the ORR performance of the Pd sites through the Pd-REx Oy interface interaction. Taking Pd-Gd2 O3 /C as a representative, it is identified that the strong coupling between Pd and Gd2 O3 induces the formation of the Pd-O-Gd bridge, which triggers charge redistribution of Pd and Gd2 O3 . The screened Pd-Gd2 O3 /C exhibits impressive ORR performance with high onset potential (0.986 VRHE ), half-wave potential (0.877â VRHE ), and excellent stability. Similar ORR results are also found for Pd-Sm2 O3 /C, Pd-Eu2 O3 /C, and Pd-CeO2 /C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd2 O3 promotes electron transfer through the Pd-O-Gd bridge, which induces the antibonding-orbital occupancy of Pd-*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd-Gd2 O3 is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd-Gd2 O3 /C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.
RESUMO
Metal-organic frameworks (MOFs) and their derivatives have attracted much attention in the field of photo/electrocatalysis owing to their ultrahigh porosity, tunable properties, and superior coordination ability. Regulating the valence electronic structure and coordination environment of MOFs is an effective way to enhance their intrinsic catalytic performance. Rare earth (RE) elements with 4f orbital occupancy provide an opportunity to evoke electron rearrangement, accelerate charged carrier transport, and synergize the surface adsorption of catalysts. Therefore, the integration of RE with MOFs makes it possible to optimize their electronic structure and coordination environment, resulting in enhanced catalytic performance. In this review, progress in current research on the use of RE-modified MOFs and their derivatives for photo/electrocatalysis is summarized and discussed. First, the theoretical advantages of RE in MOF modification are introduced, with a focus on the roles of 4f orbital occupancy and RE ion organic coordination ligands. Then, the application of RE-modified MOFs and their derivatives in photo/electrocatalysis is systematically discussed. Finally, research challenges, future opportunities, and prospects for RE-MOFs are also discussed.
RESUMO
Rare-earth (RE)-based transition metal oxides (TMO) are emerging as a frontier toward the oxygen evolution reaction (OER), yet the knowledge regarding their electrocatalytic mechanism and active sites is very limited. In this work, atomically dispersed Ce on CoO is successfully designed and synthesized by an effective plasma (P)-assisted strategy as a model (P-Ce SAs@CoO) to investigate the origin of OER performance in RE-TMO systems. The P-Ce SAs@CoO exhibits favorable performance with an overpotential of only 261 mV at 10 mA cm-2 and robust electrochemical stability, superior to individual CoO. X-ray absorption spectroscopy and in situ electrochemical Raman spectroscopy reveal that the Ce-induced electron redistribution inhibits CoO bond breakage in the CoOCe unit site. Theoretical analysis demonstrates that the gradient orbital coupling reinforces the CoO covalency of the Ce(4f)âO(2p)âCo(3d) unit active site with an optimized Co-3d-eg occupancy, which can balance the adsorption strength of intermediates and in turn reach the apex of the theoretical OER maximum, in excellent agreement with experimental observations. It is believed that the establishment of this Ce-CoO model can set a basis for the mechanistic understanding and structural design of high-performance RE-TMO catalysts.
RESUMO
Alkaline oxygen reduction reaction (ORR) is critical to electrochemical energy conversion technology, yet the rational breaking of thermodynamic inhibition for ORR through spin regulation remains a challenge. Herein, a Mott-Schottky catalyst consisting of Er2 O3 -Co particles uniformly implanted into carbon nanofibers (Er2 O3 -Co/CNF) is designed for enhancing ORR via spin-selective coupling. The optimized Er2 O3 -Co/CNF affords a high half-wave potential (0.835 V vs reversible hydrogen electrode, RHE) and onset potential (0.989 VRHE ) for the ORR surpassing individual Co/CNF and Er2 O3 /CNF. Theoretical calculations reveal the introduction of Er2 O3 optimizes the electronic structure of Co through Er(4f)-O(2p)-Co(3d) gradient orbital coupling, resulting in significantly enhanced ORR performance. Through gradient orbital coupling, the induced spin-up hole in Co 3d states endows the Er-O-Co unit active site with a spin-selective coupling channel for electron transition. This favors the decrease of the energy gap in the potential-limiting step, thus achieving a high theoretical limiting potential of 0.77 VRHE for the Er2 O3 -Co. Moreover, the potential practicability of Er2 O3 -Co/CNF as an air-cathode is also demonstrated in Zn-air batteries. This work is believed to provide, new perspectives for the design of efficient ORR electrocatalysts by engineering spin-selective coupling induced by rare-earth oxides.
RESUMO
Layered double-hydroxide (LDH) has been considered an important class of electrocatalysts for the oxygen evolution reaction (OER), but the adsorption-desorption behaviors of oxygen intermediates on its surface still remain unsatisfactory. Apart from transition-metal doping to solve this electrocatalytic problem of LDH, rare-earth (RE) species have sprung up as emerging dopants owing to their unique 4f valence-electronic configurations. Herein, the Er is chosen as a RE model to improve OER activity of LDH via constructing nickel foam supported Er-doped NiFe-LDH catalyst (Er-NiFe-LDH@NF). The optimal Er-NiFe-LDH@NF exhibits a low overpotential (191 mV at 10 mA cm-2 ), high turnover frequency (0.588 s-1 ), and low activation energy (36.03 kJ mol-1 ), which are superior to Er-free sample. Electrochemical in situ Raman spectra reveal the facilitated transition of Ni-OH into Ni-OOH for promoted OER kinetics through the Er doping effect. Theoretical calculations demonstrate that the introduction of Er facilitates the spin crossover of valence electrons by optimizing the d band center of NiFe-LDH, which leads to the GO -GHO closer to the optimal activity of the kinetic OER volcano by balancing the bonding strength of *O and *OH. Moreover, the Er-NiFe-LDH@NF presents high practicability in electrochemical water-splitting devices with a low driving potential of and a well-extended driving period.
RESUMO
The development of highly efficient and economical materials for the oxygen reduction reaction (ORR) plays a key role in practical energy conversion technologies. However, the intrinsic scaling relations exert thermodynamic inhibition on realizing highly active ORR electrocatalysts. Herein, a novel and feasible gradient orbital coupling strategy for tuning the ORR performance through the construction of Co 3d-O 2p-Eu 4f unit sites on the Eu2 O3 -Co model is proposed. Through the gradient orbital coupling, the pristine ionic property between Eu and O atoms is assigned with increased covalency, which optimizes the eg occupancy of Co sites, and weakens the OO bond, thus ultimately breaking the scaling relation between *OOH and *OH at Co-O-Eu unit sites. The optimized model catalyst displays onset and half-wave potential of 1.007 and 0.887 V versus reversible hydrogen electrode, respectively, which are higher than those of commercial Pt/C and most Co-based catalysts ever reported. In addition, the catalyst is found to possess superior selectivity and durability. It also reveals better cell performance than commercial noble-metal catalysts in Zn-air batteries in terms of high power/energy densities and long cycle life. This study provides a new perspective for electronic modulation strategy by the construction of gradient 3d-2p-4f orbital coupling.
RESUMO
Engineering Pt-free catalysts for hydrogen evolution reaction (HER) with high activity and stability is of great significance in electrochemical hydrogen production. Herein, in situ chemical H intercalation into ultrafine Pd to activate this otherwise HER-inferior material to form the ultrafine IrPdH hydride as an efficient and stable HER electrocatalyst is proposed. The formation of PdIrH depends on a new hydrogenation strategy via using ethanol as the hydrogen resource. It is demonstrated that H atoms in IrPdH originate from the OH and CH2  of ethanol, which fills the gap of ethanol as the hydrogen source for the preparation of Pd hydride. Thanks to the incorporation of H/Ir atoms and ultrafine structure, the IrPdH exhibits superior HER activity and stability in the whole pH range. The IrPdH delivers very low overpotentials of 14, 25 and 60 mV at a current density of 10 mA cm-2 respectively in 0.5 m H2 SO4 , 1 m KOH, and 1 m PBS electrolytes, which are much better than those of commercial Pt/C and most reported noble metal electrocatalysts. Theoretical calculations confirm that interstitial hydrogen availably refines the electronic density of Pd and Ir sites, which optimizes the adsorption of *H and leads to the significant enhancement of HER performance.
RESUMO
Single-atom catalysts (SACs) provide well-defined active sites with 100% atom utilization, and can be prepared using a wide range of support materials. Therefore, they are attracting global attention, especially in the fields of energy conversion and storage. To date, research has focused on transition-metal and precious-metal-based SACs. More recently, rare-earth (RE)-based SACs have emerged as a new frontier in photo/electrocatalysis owing to their unique electronic structure arising from the spin-orbit coupling of the 4f and valence orbitals, unsaturated coordination environment, and unique behavior as charge-transport bridges. However, a systematic review on the role of the RE active sites, catalytic mechanisms, and synthetic methods for RE SACs is lacking. Therefore, in this review, the latest developments in RE SACs having applications in photo/electrocatalysis are summarized and discussed. First, the theoretical advantages of RE SACs for photo/electrocatalysis are briefly introduced, focusing on the roles of the 4f orbitals and coupled energy levels. In addition, the most recent research progress on RE SACs is summarized for several important photo/electrocatalytic reactions and the corresponding catalytic mechanisms are discussed. Further, the synthetic strategies for the production of RE SACs are reported. Finally, challenges for the development of RE SACs are highlighted, along with future research directions and perspectives.
Assuntos
Metais Terras Raras , Catálise , Eletrônica , Humanos , Metais/química , Translocação GenéticaRESUMO
An dual electronic and architectural engineering strategy is a good way to rationally design earth-abundant and highly efficient electrocatalysts of the oxygen evolution reaction (OER) for sustainable hydrogen-based energy devices. Here, a Ce-doped Co9 S8 core-shell nanoneedle array (Ce-Co9 S8 @CC) supported on a carbon cloth has been designed and developed to accelerate the sluggish kinetics of the OER. Profiting from valance alternative Ce doping, a fine core-shell structure and vertically aligned nanoneedle arrayed architecture, Ce-Co9 S8 @CC integrates modulated electronic structure, highly exposed active sites, and multidimensional mass diffusion channels; together, these afford a favorable catalyzed OER. Ce-Co9 S8 @CC exhibits remarkable performance in the OER in an alkaline medium, where the overpotential requires only 242â mV to deliver a current density of 10â mA cm-2 for the OER; this is 70â mV superior to that of Ce-free Co9 S8 catalyst and other counterparts. Good stability and impressive selectivity (nearly 100 % Faradic efficiency) are also demonstrated. When integrated into a two-electrode OER//HER electrolyzer, the as-prepared Ce-Co9 S8 @CC displays a low operation potential of 1.54â V at 10â mA cm-2 and long-term stability, thus demonstrating great potential for economical water electrolysis.
RESUMO
Lattice engineering on specific facets of metal catalysts is critically important not only for the enhancement of their catalytic performance but also for deeply understanding the effect of facet-based lattice engineering on catalytic reactions. Here, we develop a facile two-step method for the lattice expansion on specific facets, i.e., Pt(100) and Pt(111), of Pt catalysts. We first prepare the Pd@Pt core-shell nanoparticles exposed with the Pt(100) and Pt(111) facets, respectively, via the Pd-seeded epitaxial growth, and then convert the Pd core to PdH0.43 by hydrogen intercalation. The lattice expansion of the Pd core induces the lattice enlargement of the Pt shell, which can significantly promote the alcohol oxidation reaction (AOR) on both Pt(100) and Pt(111) facets. Impressively, Pt mass specific activities of 32.51 A mgPt-1 for methanol oxidation and 14.86 A mgPt-1 for ethanol oxidation, which are 41.15 and 25.19 times those of the commercial Pt/C catalyst, respectively, have been achieved on the Pt(111) facet. Density functional theory (DFT) calculations indicate that the remarkably improved catalytic performance on both the Pt(100) and the Pt(111) facets through lattice expansion arises from the enhanced OH adsorption. This work not only paves the way for lattice engineering on specific facets of nanomaterials to enhance their electrocatalytic activity but also offers a promising strategy toward the rational design and preparation of highly efficient catalysts.
RESUMO
With the rapid development of anion-exchange membrane technology and adequate supply of high-performance non-noble metal oxygen reduction reaction (ORR) catalysts in alkaline media, the commercialization of anion exchange membrane fuel cells (AEMFCs) become possible. However, the kinetics of the anodic hydrogen oxidation reaction (HOR) in AEMFCs is significantly decreased compared to the HOR in proton exchange membrane fuel cells (PEMFCs). Therefore, it is urgent to develop HOR catalysts with low price, high activity, and robust stability. However, comprehensive timely reviews on this specific subject do not exist enough yet and it is necessary to update reported major achievements and to point out future investigation directions. In this review, the current reaction mechanisms on HOR are summarized and deeply understood. The debates between the mechanisms are greatly harmonized. Recent advances in developing highly active and stable electrocatalysts for the HOR are reviewed. Moreover, the side reaction control is for the first time systematically introduced. Finally, the challenges and future opportunities in the field of HOR catalysis are outlined.
Assuntos
Metais , Prótons , Catálise , EletrodosRESUMO
Morphology-control synthesis is an effective means to tailor surface structure of noble-metal nanocrystals, which offers a sensitive knob for tuning their electrocatalytic properties. The functional molecules are often indispensable in the morphology-control synthesis through preferential adsorption on specific crystal facets, or controlling certain crystal growth directions. In this review, the recent progress in morphology-control synthesis of noble-metal nanocrystals assisted by amino-based functional molecules for electrocatalytic applications are focused on. Although a mass of noble-metal nanocrystals with different morphologies have been reported, few review studies have been published related to amino-based molecules assisted control strategy. A full understanding for the key roles of amino-based molecules in the morphology-control synthesis is still necessary. As a result, the explicit roles and mechanisms of various types of amino-based molecules, including amino-based small molecules and amino-based polymers, in morphology-control of noble-metal nanocrystals are summarized and discussed in detail. Also presented in this progress are unique electrocatalytic properties of various shaped noble-metal nanocrystals. Particularly, the optimization of electrocatalytic selectivity induced by specific amino-based functional molecules (e.g., polyallylamine and polyethyleneimine) is highlighted. At the end, some critical prospects, and challenges in terms of amino-based molecules-controlled synthesis and electrocatalytic applications are proposed.
Assuntos
Nanopartículas Metálicas , Adsorção , Cristalização , MetaisRESUMO
Controlling the morphologies and structures of noble-metal nanocrystals has always been a frontier field in electrocatalysis. Functional molecules such as capping agents, surfactants and additives are indispensable in shape-control synthesis. Amino-based functional molecules have strong coordination abilities with metal ions, and they are widely used in the morphology control of nanocrystals. In this minireview, we pay close attention to recent advances in the use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals. The effects of various amino-based molecules on differently shaped noble-metal nanocrystals, including zero-, one-, two-, and three-dimensional nanocrystals, are reviewed and summarized. The roles and mechanisms of amino-based small molecules and long-chain ammonium salts relating to the morphology-control synthesis of noble-metal nanocrystals are highlighted. Relationships between shape and electrocatalytic properties are also described. Finally, some key prospects and challenges relating to the controllable synthesis of noble-metal nanocrystals and their electrocatalytic applications are proposed.
RESUMO
Nitrogen-coordinated metal single atoms in carbon have aroused extensive interest recently and have been growing as an active research frontier in a wide range of key renewable energy reactions and devices. Herein, a step-by-step self-assembly strategy is developed to allocate nickel (Ni) and iron (Fe) single atoms respectively on the inner and outer walls of graphene hollow nanospheres (GHSs), realizing separate-sided different single-atom functionalization of hollow graphene. The Ni or Fe single atom is demonstrated to be coordinated with four N atoms via the formation of a Ni-N4 or Fe-N4 planar configuration. The developed Ni-N4 /GHSs/Fe-N4 Janus material exhibits excellent bifunctional electrocatalytic performance, in which the outer Fe-N4 clusters dominantly contribute to high activity toward the oxygen reduction reaction (ORR), while the inner Ni-N4 clusters are responsible for excellent activity toward the oxygen evolution reaction (OER). Density functional theory calculations demonstrate the structures and reactivities of Fe-N4 and Ni-N4 for the ORR and OER. The Ni-N4 /GHSs/Fe-N4 endows a rechargeable Zn-air battery with excellent energy efficiency and cycling stability as an air-cathode, outperforming that of the benchmark Pt/C+RuO2 air-cathode. The current work paves a new avenue for precise control of single-atom sites on carbon surface for the high-performance and selective electrocatalysts.
RESUMO
Controllable synthesis of atomically ordered intermetallic nanoparticles (NPs) is crucial to obtain superior electrocatalytic performance for fuel cell reactions, but still remains arduous. Herein, we demonstrate a novel and general hydrogel-freeze drying strategy for the synthesis of reduced graphene oxide (rGO) supported Pt3 M (M=Mn, Cr, Fe, Co, etc.) intermetallic NPs (Pt3 M/rGO-HF) with ultrasmall particle size (about 3â nm) and dramatic monodispersity. The formation of hydrogel prevents the aggregation of graphene oxide and significantly promotes their excellent dispersion, while a freeze-drying can retain the hydrogel derived three-dimensionally (3D) porous structure and immobilize the metal precursors with defined atomic ratio on GO support during solvent sublimation, which is not afforded by traditional oven drying. The subsequent annealing process produces rGO supported ultrasmall ordered Pt3 M intermetallic NPs (≈3â nm) due to confinement effect of 3D porous structure. Such Pt3 M intermetallic NPs exhibit the smallest particle size among the reported ordered Pt-based intermetallic catalysts. A detailed study of the synthesis of ordered intermetallic Pt3 Mn/rGO catalyst is provided as an example of a generally applicable method. This study provides an economical and scalable route for the controlled synthesis of Pt-based intermetallic catalysts, which can pave a way for the commercialization of fuel cell technologies.