Tandem Pt/TiO2 and Fe3C catalysts for direct transformation of CO2 to light hydrocarbons under high space velocity.

CO2 hydrogenation to hydrocarbons under high space velocity is crucial for industrial applications, but traditional Fe-based catalysts often suffer from the low activity and poor stability. Herein, we report a new tandem catalyst system combining Pt/TiO2 catalysts with Fe3C catalysts for the direct conversion of CO2 into C2-C4 hydrocarbons under high space velocity. The Pt/TiO2 component promotes *CO intermediate production with an enhanced Reverse Water-Gas Shift (RWGS) reaction efficiency, providing a highly reactive species for the Fe3C catalyst to achieve Fischer-Tropsch synthesis (FTS). By maximizing the contact interface between the Pt/TiO2 and Fe-based components through a granule mixing configuration, we achieve significant enhancements in both CO2 conversion rate (24.0 %) and C2-C4 hydrocarbons selectivity (51.1 %) under the gaseous hourly space velocity (GHSV) of 100000 mL gcat-1h-1. Besides, excellent stability is achieved by the tandem catalysts with continuous catalysis for up to 80 h without significant decrease in activity. Through modulation of the reduction states of iron oxide, we effectively tune the composition of Fe-based catalyst, thereby tailoring the product distribution. Through this work, we not only offer a promising avenue for reducing CO2 for efficient CO2 utilization but also highlight the importance of catalyst design in advancing sustainable chemical synthesis.

Modulating the Electronic Structure of Cobalt-Vanadium Bimetal Catalysts for High-Stable Anion Exchange Membrane Water Electrolyzer.

Modulating the electronic structure of catalysts to effectively couple the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is essential for developing high-efficiency anion exchange membrane water electrolyzer (AEMWE). Herein, a coral-like nanoarray composed of nanosheets through the synergistic layering effect of cobalt and the 1D guiding of vanadium is synthesized, which promotes extensive contact between the active sites and electrolyte. The HER and OER activities can be enhanced by modulating the electronic structure through nitridation and phosphorization, respectively, enhancing the strength of metal-H bond to optimize hydrogen adsorption and facilitating the proton transfer to improve the transformation of oxygen-containing intermediates. Resultantly, the AEMWE achieves a current density of 500 mA cm-2 at 1.76 V for 1000 h in 1.0 M KOH at 70 °C. The energy consumption is 4.21 kWh Nm-3 with the producing hydrogen cost of $0.93 per kg H2. Operando synchrotron radiation and Bode phase angle analyses reveal that during the high-energy consumed OER, the dissolution of vanadium species transforms distorted Co-O octahedral into regular octahedral structures, accompanied by a shortening of the Co-Co bond length. This structural evolution facilitates the formation of oxygen intermediates, thus accelerating the reaction kinetics.

Study on synergistic effects of 4f levels of erbium and black phosphorus/SnNb2O6 heterostructure catalysts by multiple spectroscopic analysis techniques.

Lanthanide single atom modified catalysts are rarely reported because the roles of lanthanide in photocatalysis are difficult to explain clearly. Based on the construction of Er single atom modified black phosphorus/SnNb2O6 (BP/SNO) heterojunctions, the synergistic effect of 4f levels of Er and heterostructures was studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations. According to the Judd-Ofelt theory of lanthanide ions, the CO2 photoreduction test under single wavelength excitation verifies that the 4F7/2/2H11/2 → 4I15/2 emissions of Er in BPEr/SNOEr can be more easily absorbed by SNO and BP, further proving the role of the 4f levels. As a result, the CO and CH4 yields of BPEr/SNOEr-10 under visible light irradiation are 10.7 and 10.1 times higher than those of pure BP, respectively, and 3.4 and 1.5 times higher than those of SNO. The results of DFT calculations show that the Er single atoms can cause surface reconstruction, regulate the active sites of BP, and reduce the energy change value in the key steps (CO2* + H+ + e- → COOH* and COOH* → CO* + H2O). This work provides novel insights into the design of lanthanide single atom photocatalysts for CO2 reduction.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting.

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Schedule risk model of water intake tunnel construction considering mood factors and its application.

The mood index [Formula: see text] was used to describe evaluator attitudes regarding the progress of a project that formed the basis of a construction period prediction model. The degrees of pessimism [Formula: see text] and optimism [Formula: see text] were introduced, and an analysis model was established using [Formula: see text] and [Formula: see text] to predict the construction period and completion probability Firstly, the absolute construction period of each process of tunnel No. 2 can be obtained according to the measured daily average footage of each process of tunnel No. 1. Secondly, the probability of the stoppage caused by different factors can be obtained after the statistical analysis of the factors responsible for the stoppage of tunnel No. 1. Finally, the expected construction period and completion probability of tunnel No. 2 under different pessimism and optimism conditions are obtained by using the progress risk analysis theory of emotional models and the program evaluation and review technique method. An engineering application showed that the expected construction period increased, and the completion probability decreased considerably with increasing pessimism; the opposite trend occurred as optimism increased. During the process of risk management and control, the prediction model can be used to perform precise quantitative analysis of the expected construction period and completion probability, reduce the blindness of construction management, control decisions of complex giant tunnel projects, and provide a more accurate basis for decision makers to judge risks. The findings of this study can be applied to hydraulic tunnels and can provide a reference for traffic tunnels, railway tunnels, and other similar projects.

Potential Dominates Structural Recombination of Single Atom Mn Sites for Promoting Oxygen Reduction Reaction.

Single atom sites (SAS) often undergo structural recombination in oxygen reduction reaction (ORR), while the effect of valence state and reconstruction on active centers needs to be investigated thoroughly. Herein, the Mn-SAS catalyst with uniform and precise Mn-N4 configuration is rationally designed. We utilize operando synchrotron radiation to track the dynamic evolution of active centers during ORR. Under the applied potential, the structural evolution of Mn-N4 into Mn-N3 C and further into Mn-N2 C2 configurations is clarified. Simultaneously, the valence states of Mn are increased from +3.0 to +3.8 and then decreased to +3.2. When the potential is removed, the catalyst returned to its initial Mn+3.0 -N4 configuration. Such successive evolutions optimize the electronic and geometric structures of active centers as evidenced by theory calculations. The evolved Mn+3.8 -N3 C and Mn+3.2 -N2 C2 configurations respectively adjust the O2 adsorption and reduce the energy barrier of rate-determining step. Thus, it can achieve an onset potential of 0.99 V, superior stability over 10,000 cycles, and a high turnover frequency of 1.59 s-1 at 0.85 VRHE. Our present work provides new insights into the construction of well-defined SAS catalysts by regulating the valence states and configurations of active centers.

All-in-one self-floating porous foams as robust heat-blocking layers for efficient photothermal conversion and solar desalination.

Solar-driven interfacial evaporation is a highly efficient and ecofriendly technology for producing freshwater. Herein, self-floating plasmon Ag/black TiO2/carbon porous layered foams (Ag-BTCFs) were demonstrated as efficient solar-thermal convectors using freeze-drying cast-molding and high-temperature surface hydrogenation strategies. This all-in-one three-dimensional (3D) cross-linked self-floating porous layered foam material with full-spectrum absorption can fully harvest sunlight (∼95.45%) and effectively block heat transfer to its sublayer. The synergy of sufficient utilization of absorbed ultraviolet radiation by black TiO2 (b-TiO2), visible light absorption by Ag nanoparticles (Ag NPs) via localized surface plasmon resonance, and near-infrared absorption by layered-amorphous carbon can achieve full-solar-spectrum absorption to concentrate thermal energy. In addition to their synergistic effect, they are conducive to the relaxation of hot electrons when utilizing photogenerated holes to degrade pollutants in domestic wastewater. The steam generation efficiency of Ag-BTCFs is up to 1.79 kg m-2h-1 due to their solar energy conversion efficiency of 81.74% under 1 sun irradiation, which is five times higher than the evaporation rate of pure water. Notably, the material's efficient ion removal rate of 99.80% for solar desalination indicates its high potential for various applications. This strategy provides new insights for fabricating recyclable heat-blocking layer systems against thermal loss to enhance solar steam generation.

Shear Stress Triggers Ultrathin-Nanosheet Carbon Nitride Assembly for Photocatalytic H2O2 Production Coupled with Selective Alcohol Oxidation.

Coupled photocatalysis without cocatalysts can maximize the utilization of photons and atoms, which puts forward higher demands on photocatalysts. Polymeric carbon nitride (CN) has become the most promising photocatalyst, but still suffers from major drawbacks of insufficient catalytic sites and low quantum efficiency. Herein, we report a fluid shear stress-assisted molecular assembly to prepare ultrathin-nanosheet-assembled acanthosphere-like CN (ASCN) with nitrogen vacancy (Nv) and carbonyl modification. Shear stress breaks the stacking interactions between layers and cuts the stacked structure into ultrathin layers, which are further reassembled into acanthosphere bundles driven by "centrifugal force". Benefitted greatly from the ultrathin nature that provides more exposed active sites and improves charge carrier separation, ASCN-3 exhibits a 20-fold higher activity than the bulk counterpart toward oxygen reduction to H2O2 coupled with 4-methoxybenzyl alcohol (4-MBA) oxidation to anisaldehyde (AA), with significantly increased turnover frequency (TOF) values (TOF: 1.69 h-1 for H2O2 and 1.02 h-1 for AA). Significantly, ASCN-3 exhibits 95.8% conversion for 4-MBA oxidation with nearly 100% selectivity. High apparent quantum yields of 11.7% and 9.3% at 420 nm are achieved for H2O2 photosynthesis and 4-MBA oxidation. Mechanism studies suggest that carbonyl induces holes concentrated at the neighboring melem unit to directly oxidize the Cα-H bond of 4-MBA to produce carbon radicals, and Nv as oxygen adsorption active site traps electrons to form a superoxide radical that further combines with the shed protons into H2O2. This work presents a simple physical method to break the layered stack of CN for creating hierarchical assembly for coupled photocatalysis.

Decrypting the Electron-Withdrawing Effect of Au-Decorated Bi2 O3 for Efficient CO2 -to-Formate Electroreduction.

Although the electron-withdrawing effect of gold (Au) is highlighted in catalytic reactions, its enhancement mechanism for electron transport, especially in the electrochemical process, is still unclear. Herein, Au-decorated Bi2 O3 (Au-Bi2 O3 ) is proposed as a proof-of-concept to investigate the electron-withdrawing effect in the electrocatalytic CO2 reduction reaction (eCO2 RR) process. Evidence from in situ Raman spectra and in situ XRD tests reveals that, compared to Bi2 O3 , Bi species in Au-Bi2 O3 can be reduced to metallic Bi more rapidly and more easily driven by the electron-withdrawing effect of Au. The XPS tests after eCO2 RR further validates the transformation from Bi3+ to Bi0 in Au-Bi2 O3 is more complete. Meanwhile, in the in situ Fourier transform infrared (FTIR) spectra, the key intermediates (CO2 *- and OCHO*- ) appear at the more positive potential, indicating that metallic Bi is favorable for eCO2 RR due to the lower energy barrier as corroborated by density function theory (DFT) calculations. Au don't directly participate in the conversion from CO2 to formate as the reaction sites, but utilize the electron-withdrawing effect to motivate Bi-sites to deliver higher catalytic activity and higher selectivity to formate at a lower applied potential. This study not only has an insight into the electron-withdrawing effect of Au on the eCO2 RR process, but also develops a new perspective for engineering electron-withdrawing effect in electrocatalysts for high-efficient CO2 -to-formate conversion.

Mo-Ni-based Heterojunction with Fine-customized d-Band Centers for Hydrogen Production Coupled with Benzylamine Electrooxidation in Low Alkaline Medium.

Benzylamine electrooxidation reaction (BAOR) is a promising route to produce value-added, easy-separated benzonitrile, and effectively hoist H2 production. However, achieving excellent performance in low alkaline medium is a huge challenge. The performance is intimately correlated with effective coupling of HER and BAOR, which can be achieved by manipulating the d-electron structure of catalyst to regulate the active species from water. Herein, we constructed a biphasic Mo0.8 Ni0.2 N-Ni3 N heterojunction for enhanced bifunctional performance toward HER coupled with BAOR by customizing the d-band centers. Experimental and theoretical calculations indicate that charge transfer in the heterojunction causes the upshift of the d-band centers, which one side facilitates to decrease water activation energy and optimize H* adsorption on Mo0.8 Ni0.2 N for promoting HER activity, the other side favors to more easily produce and adsorb OH* from water for forming NiOOH on Ni3 N and optimizing adsorption energy of benzylamine, thus catalyzing BAOR effectively. Accordingly, it shows an industrial current density of 220 mA cm-2 at 1.59 V and high Faradaic efficiencies (>99 %) for H2 production and converting benzylamine to benzonitrile in 0.1 M KOH/0.5 M Na2 SO4 . This work guides the design of excellent bifunctional electrocatalysts for the scalable production of green hydrogen and value-added products.

Copper Collector Generated Cu+/Cu2+ Redox Pair for Enhanced Efficiency and Lifetime of Zn-Ni/Air Hybrid Battery.

Although Zn-Ni/air hybrid batteries exhibit improved energy efficiency, power density, and stability compared with Zn-air batteries, they still cannot satisfy the high requirements of commercialization. Herein, the Cu+/Cu2+ redox pair generated from a copper collector has been introduced to construct the hybrid battery system by combining Zn-air and Zn-Cu/Zn-Ni, in which CuXO@NiFe-LDH and Co-N-C dodecahedrons are respectively adopted as oxygen evolution (OER) and oxygen reduction (ORR) electrodes. For fabricating CuXO@NiFe-LDH, the Cu foam collector is oxidized to in situ form 1D CuXO nanoneedle arrays, which could generate the Cu+/Cu2+ redox pair to enhance battery efficiency by providing an extra charging-discharging voltage plateau to reduce the charging voltage and increase the discharge voltage. Then, the 2D NiFe hydrotalcite nanosheets grow on the nanoneedle arrays to obtain 3D interdigital structures, facilitating the intimate contact of the ORR/OER electrode and electrolyte by providing a multichannel structure. Thus, the battery system could endow a high energy efficiency (79.6% at 10 mA cm-2), an outstanding energy density (940 Wh kg-1), and an ultralong lifetime (500 h). Significantly, it could stably operate under harsh environments, such as oxygen-free and any humidity. In situ X-ray diffraction (XRD) combined with ex situ X-ray photoelectron spectroscopy (XPS) analyses demonstrate the reversible process of Cu-O-Cu ↔ Cu-O and Ni-O ↔ Ni-O-O-H during the charging/discharging, which are responsible for the enhanced efficiency and lifetime of battery.

Reconstruction of Highly Dense Cu-N4 Active Sites in Electrocatalytic Oxygen Reduction Characterized by Operando Synchrotron Radiation.

The emerging star of single atomic site (SAS) catalyst has been regarded as the most promising Pt-substituted electrocatalyst for oxygen reduction reaction (ORR) in anion-exchange membrane fuel cells (AEMFCs). However, the metal loading in SAS directly affects the whole device performance. Herein, we report a dual nitrogen source coordinated strategy to realize high dense Cu-N4 SAS with a metal loading of 5.61 wt% supported on 3D N-doped carbon nanotubes/graphene structure wherein simultaneously performs superior ORR activity and stability in alkaline media. When applied in H2 /O2 AEMFC, it could reach an open-circuit voltage of 0.90 V and a peak power density of 324 mW cm-2 . Operando synchrotron radiation analyses identify the reconstruction from initial Cu-N4 to Cu-N4 /Cu-nanoclusters (NC) and the subsequent Cu-N3 /Cu-NC under working conditions, which gradually regulate the d-band center of central metal and balance the Gibbs free energy of *OOH and *O intermediates, benefiting to ORR activity.

Unraveling the mechanism for paired electrocatalysis of organics with water as a feedstock.

Paired electroreduction and electrooxidation of organics with water as a feedstock to produce value-added chemicals is meaningful. A comprehensive understanding of reaction mechanism is critical for the catalyst design and relative area development. Here, we have systematically studied the mechanism of the paired electroreduction and electrooxidation of organics on Fe-Mo-based phosphide heterojunctions. It is shown that active H* species for organic electroreduction originate from water. As for organic electrooxidation, among various oxygen species (OH*, OOH*, and O*), OH* free radicals derived from the first step of water dissociation are identified as active species. Furthermore, explicit reaction pathways and their paired advantages are proposed based on theoretical calculations. The paired electrolyzer powered by a solar cell shows a low voltage of 1.594 V at 100 mA cm-2, faradaic efficiency of ≥99%, and remarkable cycle stability. This work provides a guide for sustainable synthesis of various value-added chemicals via paired electrocatalysis.

A Unique Fe-N4 Coordination System Enabling Transformation of Oxygen into Superoxide for Photocatalytic CH Activation with High Efficiency and Selectivity.

Selective oxidation of CH bonds is one of the most important reactions in organic synthesis. However, activation of the α-CH bond of ethylbenzene by use of photocatalysis-generated superoxide anions (O2 •- ) remains a challenge. Herein, the formation of individual Fe atoms on polymeric carbon nitride (CN), that activates O2  to create O2 •- for facilitating the reaction of ethylbenzene to form acetophenone, is demonstrated. By utilizing density functional theory and materials characterization techniques, it is shown that individual Fe atoms are coordinated to four N atoms of CN and the resultant low-spin Fe-N4  system (t2g 6 eg 0 ) is not only a great adsorption site for oxygen molecules, but also allows for fast transfer of electrons generated in the CN framework to adsorbed O2 , producing O2 •- . The oxidation reaction of ethylbenzene triggered by O2 •- ions turns out to have a high conversion rate of 99% as well as an acetophenone selectivity of 99%, which can be ascribed to a novel reaction pathway that is different from the conventional route involving hydroxyl radicals and the production of phenethyl alcohol. Furthermore, it possesses great potential for other CH activation reactions besides ethylbenzene oxidation.

Atomically Dispersed Fe-N3 C Sites Induce Asymmetric Electron Structures to Afford Superior Oxygen Reduction Activity.

Introducing heteroatoms into atomically dispersed Fe-N4 sites with symmetric electron distribution can adjust the imperfect oxygenated adsorption-activation and promote oxygen reduction reaction (ORR) activity. However, the relevant design synthesis and deeply understanding the electrocatalytic mechanism of such an asymmetric structure by introducing Fe-C coordination remains challenging. Herein, the structural stability of Fe-Nx Cy (x = 0 ≈ 4, y = 4-x) is first theoretically predicted and indicates that the energy of Fe-N4 in the two most stable structures is greater than that of Fe-N3 C. Subsequently, Fe-N4 and Fe-N3 C configurations are controlled synthesized by adjusting pyrolytic temperature. The Fe-N3 C-based electrocatalyst displays a boosted ORR activity with a half-wave potential of 0.91 V and superior long-term stability, outperforming Fe-N4 , Pt/C, and state-of-the-art noble metal-free electrocatalysts. Density functional theory calculations unveil that Fe-N3 C is much more favorable for electron delocalization than Fe-N4 . Furthermore, the residual Zn atom derived from ZIF-8 would give its d-orbit electron to the Fe atom, so the synergy between Fe-N3 C and Zn-N4 makes an enhanced ORR activity.

Controlled Atmosphere Corrosion Engineering toward Inhomogeneous NiFe-LDH for Energetic Oxygen Evolution.

The "Fe effect" can maximize the activity of nickel-iron layered double hydroxides (NiFe-LDH) toward oxygen evolution reaction (OER) when the iron content, the lattice distortion, the conductivity, and other related factors are well balanced. It is difficult for the homogeneous NiFe-LDH to take good care of the above requirements at the same time. Herein, we proposed an elaborate atmosphere corrosion strategy to construct porous NiFe-LDH with rich edge/surface-Fe defects on Ni foam (NF). Such edge/surface-Fe defects, mainly caused by the local unequal-stoichiometric ratio of Fe/Ni in the nanometer or subnanometer region, are determined by the unbalanced permeating of the acid vapor and the confined reaction of local Fe and Ni species ionized by the acid vapor. Benefiting from the abundant and fantastic edge/surface-Fe defects, the optimal NiFe-LDH prepared by atmosphere corrosion is more energetic for OER than that synthesized in conventional liquid phase, only a potential of 1.481 and 1.552 VRHE to respectively achieve the current density of 100 and 1000 mA cm-2 as well as a satisfactory stability and reproducibility. An overall water-splitting system assembled by inhomogeneous NiFe-LDH and commercial Pt-C can reach a current density of 100 mA cm-2 at a solar cell of 1.72 V. Additionally, the atmosphere corrosion is very suitable for the large-scale, green, and economic synthesis of metal-based catalysts with high enrichment of defects, highlighting its potential for device and industrial applications.

Vanadium-Incorporated CoP2 with Lattice Expansion for Highly Efficient Acidic Overall Water Splitting.

A proton exchange membrane water electrolyzer (PEMWE) in acidic medium is a hopeful scenario for hydrogen production using renewable energy, but the grand challenge lies in substituting noble-metal catalysts. Herein, a robust electrocatalyst of V-CoP2 porous nanowires arranged on a carbon cloth is successfully fabricated by incorporating vanadium into the CoP2 lattice. Structural characterizations and theoretical analysis indicate that lattice expansion of CoP2 caused by V incorporation results in the upshift of the d-band center, which is conducive to hydrogen adsorption for boosting the hydrogen evolution reaction (HER). Besides, V promotes surface reconstruction to generate a thicker Co3 O4 layer with an oxygen vacancy that enhances acid-corrosion resistance and optimizes the adsorption of water and oxygen-containing species, thus improving activity and stability toward the oxygen evolution reaction (OER). Accordingly, it presents a superior acidic overall water splitting activity (1.47 V@10 mA cm-2 ) to Pt-C/CC||RuO2 /CC (1.59 V@10 mA cm-2 ), and remarkable stability. This work proposes a new route to design efficient non-noble metal electrocatalysts for PEMWE.

Designed Synthesis and Catalytic Mechanisms of Non-Precious Metal Single-Atom Catalysts for Oxygen Reduction Reaction.

Oxygen reduction reaction (ORR) is the important half-reaction for metal-air batteries and fuel cells (FCs), which plays the decisive role for the performance of whole devices. Developing high-efficiency non-precious metal ORR catalysts is urgent and still challenging. Single-atom catalysts (SACs) are considered to be one of the promising substitutes for Pt due to their maximum atom utilization efficiency and mass activity. Despite considerable efforts in preparing various SACs, the reaction mechanism and intrinsic activity modulation during the ORR reaction are still not understood in-depth. In this review, the latest advances in the current synthetic strategies for SACs are summarized. The effect of various coordination environments including central metal atoms, coordination atoms, environmental atoms, and guest groups on the intrinsic ORR activity of SACs are discussed. The electrocatalytic mechanisms are clarified by combining density functional theory calculations with in situ advanced characterization technologies. Then, the applications of SACs in FCs and Zn-air batteries are reviewed. Finally, the prospects and challenges for further development of SACs are highlighted.

Construction of Six-Oxygen-Coordinated Single Ni Sites on g-C3 N4 with Boron-Oxo Species for Photocatalytic Water-Activation-Induced CO2 Reduction.

The configuration regulation of single-atom photocatalysts (SAPCs) can significantly influence the interfacial charge transfer and subsequent catalytic process. The construction of conventional SAPCs for aqueous CO2 reduction is mainly devoted toward favorable activation and photoreduction of CO2 , however, the role of water is frequently neglected. In this work, single Ni atoms are successfully anchored by boron-oxo species on g-C3 N4 nanosheets through a facile ion-exchange method. The dative interaction between the B atom and the sp2 N atom of g-C3 N4 guarantees the high dispersion of boron-oxo species, where O atoms coordinate with single Ni (II) sites to obtain a unique six-oxygen-coordinated configuration. The optimized single-atom Ni photocatalyst, rivaling Pt-modified g-C3 N4 nanosheets, provides excellent CO2 reduction rate with CO and CH4 as products. Quasi-in-situ X-ray photoelectron spectra, transient absorption spectra, isotopic labeling, and in situ Fourier transform infrared spectra reveal that as-fabricated six-oxygen-coordinated single Ni (II) sites can effectively capture the photoelectrons of CN along the BO bridges and preferentially activate adsorbed water to produce H atoms to eventually induce a hydrogen-assisted CO2 reduction. This work diversifies the synthetic strategies for single-atom catalysts and provides insight on correlation between the single-atom configuration and reaction pathway.