Design guidelines for normal-dispersion fiber optical parametric chirped-pulse amplifiers.

We theoretically investigate methods of controlling pulse generation in normal-dispersion fiber optical parametric chirped-pulse amplifiers. We focus on high-energy, ultrashort pulses at wavelengths widely separated from that of the pump, and find that within this regime, a number of simple properties describe the essential phase and gain dynamics. Of primary importance are the relationships between the chirps of the pump, seed, and parametric gain, which we theoretically predict and then experimentally validate. By properly arranging these parameters, the signal and idler waves can be widely customized to fulfill a remarkable range of application requirements, spanning from narrowband to few-cycle.

Nonlinear ultrafast fiber amplifiers beyond the gain-narrowing limit.

Ultrafast lasers are becoming increasingly widespread in science and industry alike. Fiber-based ultrafast laser sources are especially attractive because of their compactness, alignment-free setups, and potentially low cost. However, confining short pulses within a fiber core leads to high intensities, which drives a host of nonlinear effects. While these phenomena and their interactions greatly complicate the design of such systems, they can also provide opportunities for engineering new capabilities. Here, we report a new fiber amplification regime distinguished by the use of a dynamically evolving gain spectrum as a degree of freedom: as a pulse experiences nonlinear spectral broadening, absorption and amplification actively reshape both the pulse and the gain spectrum itself. The dynamic co-evolution of the field and excited-state populations supports pulses that can broaden spectrally by almost two orders of magnitude and well beyond the gain bandwidth, while remaining cleanly compressible to their sub-50-fs transform limit. Theory and experiments provide evidence that a nonlinear attractor underlies the management of the nonlinearity by the gain. Further research into these mutual, pulse-inversion propagation dynamics may address open scientific questions and pave the way toward simple, compact fiber sources that produce high-energy, sub-30-fs pulses.

Normal-dispersion fiber optical parametric chirped-pulse amplification.

We demonstrate a fiber optical parametric chirped-pulse amplifier pumped in the normally dispersive regime. This approach is readily scalable, offering a route to microjoule-level, femtosecond pulses at new wavelengths. As a first demonstration, we pump with chirped pulses at 1.03 µm and seed with a continuous-wave beam at 0.85 µm, and are able to generate idlers at 1.3 µm with durations as short as 210 fs or energies as high as 180 nJ.

Self-seeded, multi-megawatt, Mamyshev oscillator.

We demonstrate a fiber oscillator that achieves 3 MW peak power, is easily started, and is environmentally stable. The Mamyshev oscillator delivers 190-nJ pulses that can be compressed externally to 35 fs duration. Accurate numerical modeling of the gain medium provides insight into the behavior and performance of the device.

Several new directions for ultrafast fiber lasers [Invited].

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread - techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled control over an electric field.

Broadband hyperspectral stimulated Raman scattering microscopy with a parabolic fiber amplifier source.

Hyperspectral stimulated Raman scattering (hsSRS) microscopy has recently emerged as a powerful non-destructive technique for the label-free chemical imaging of biological samples. In most hsSRS imaging experiments, the SRS spectral range is limited by the total bandwidth of the excitation laser to ~300 cm-1 and a spectral resolution of ~25 cm-1. Here we present a novel approach for broadband hsSRS microscopy based on parabolic fiber amplification to provide linearly chirped broadened Stokes pulses. This novel hsSRS instrument provides >600 cm-1 spectral coverage and ~10 cm-1 spectral resolution. We further demonstrated broadband hsSRS imaging of the entire Raman fingerprint region for resolving the distribution of major biomolecules in fixed cells. Moreover, we applied broadband hsSRS in imaging amyloid plaques in human brain tissue with Alzheimer's disease.

High-power femtosecond pulses without a modelocked laser.

We demonstrate a fiber system which amplifies and compresses pulses from a gain-switched diode. A Mamyshev regenerator shortens the pulses and improves their coherence, enabling subsequent amplification by parabolic pre-shaping. As a result, we are able to control nonlinear effects and generate nearly transform-limited, 140-fs pulses with 13-MW peak power-an order-of-magnitude improvement over previous gain-switched diode sources. Seeding with a gain-switched diode results in random fluctuations of 2% in the pulse energy, which future work using known techniques may ameliorate. Further development may allow such systems to compete directly with sources based on modelocked oscillators in some applications while enjoying unparalleled robustness and repetition rate control.

Limits of Femtosecond Fiber Amplification by Parabolic Pre-Shaping.

We explore parabolic pre-shaping as a means of generating and amplifying ultrashort pulses. We develop a theoretical framework for modeling the technique and use its conclusions to design a femtosecond fiber amplifier. Starting from 9 ps pulses, we obtain 4.3 µJ, nearly transform-limited pulses 275 fs in duration, simultaneously achieving over 40 dB gain and 33-fold compression. Finally, we show that this amplification scheme is limited by Raman scattering, and outline a method by which the pulse duration and energy may be further improved and tailored for a given application.

Self-similar pulse evolution in a fiber laser with a comb-like dispersion-decreasing fiber.

We demonstrate an erbium fiber laser with self-similar pulse evolution inside a comb-like dispersion-decreasing fiber. We show numerically and experimentally that the comb-like dispersion-decreasing fiber works as well as an ideal one, and offers major practical advantages. The existence of a nonlinear attractor is verified by the invariant pulse chirp over a wide range of net cavity dispersion in experiments. The laser generates 1.3 nJ pulses with parabolic shapes and linear chirps, which can be dechirped to 37 fs. Comb-like dispersion-decreasing fiber should enable the generation of high-energy few-cycle pulses directly from a fiber oscillator.