Linkage conversions in single-crystalline covalent organic frameworks.

Single-crystal X-ray diffraction is a powerful characterization technique that enables the determination of atomic arrangements in crystalline materials. Growing or retaining large single crystals amenable to it has, however, remained challenging with covalent organic frameworks (COFs), especially suffering from post-synthetic modifications. Here we show the synthesis of a flexible COF with interpenetrated qtz topology by polymerization of tetra(phenyl)bimesityl-based tetraaldehyde and tetraamine building blocks. The material is shown to be flexible through its large, anisotropic positive thermal expansion along the c axis (αc = +491 × 10-6 K-1), as well as through a structural transformation on the removal of solvent molecules from its pores. The as-synthesized and desolvated materials undergo single-crystal-to-single-crystal transformation by reduction and oxidation of its imine linkages to amine and amide ones, respectively. These redox-induced linkage conversions endow the resulting COFs with improved stability towards strong acid; loading of phosphoric acid leads to anhydrous proton conductivity up to ca. 6.0 × 10-2 S cm-1.

Directional Defect Management in Perovskites by In Situ Decomposition of Organic Metal Chalcogenides for Efficient Solar Cells.

Directional defects management in polycrystalline perovskite film with inorganic passivator is highly demanded while yet realized for fabricating efficient and stable perovskite solar cells (PSCs). Here, we develop a directional passivation strategy employing a two-dimensional (2D) material, Cu-(4-mercaptophenol) (Cu-HBT), as a passivator precursor. Cu-HBT combines the merits of the targeted modification from organic passivator and excellent stability offered by inorganic passivator. Featuring with dense organic functional motifs on its surfaces, Cu-HBT has the capability to "find" and fasten to the Pb defect sites in perovskites through coordination interactions during a spin-coating process. During subsequent annealing treatment, the organic functional motifs cleave from Cu-HBT and convert in situ into p-type semiconductors, Cu2 S and PbS. The resultant Cu2 S and PbS not only serve as stable inorganic passivators on the perovskite surface, significantly enhancing cell stability, but also facilitate efficient charge extraction and transport, resulting in an impressive efficiency of up to 23.5 %. This work contributes a new defect management strategy by directionally yielding the stable inorganic passivators for highly efficient and stable PSCs.

A Humidity-Induced Large Electronic Conductivity Change of 107 on a Metal-Organic Framework for Highly Sensitive Water Detection.

The electronic conductivity (EC) of metal-organic frameworks (MOFs) is sensitive to strongly oxidizing guest molecules. Water is a relatively mild species, however, the effect of H2 O on the EC of MOFs is rarely reported. We explored the effect of H2 O on the EC in the MOFs (NH2 )2 -MIL-125 and its derivatives with experimental and theoretical investigations. Unexpectedly, a large EC increase of 107 on H2 SO4 @(NH2 )2 -MIL-125 by H2 O was observed. Brønsted acid-base pairs formed with the -NH2 groups, and H2 SO4 played an important role in promoting the charge transfer from H2 O to the MOF. Based on H2 SO4 @(NH2 )2 -MIL-125, a high-performance chemiresistive humidity sensor was developed with the highest sensitivity, broadest detection range, and lowest limit of detection amongst all reported sensing materials to date. This work not only demonstrated that H2 O can remarkably influence the EC of MOFs, but it also revealed that post-modification of the structure of MOFs could enhance the influence of the guest molecule on their EC to design high-performance sensing materials.

TiO2@COF Nanowire Arrays: A "Filter Amplifier" Heterojunction Strategy to Reverse the Redox Nature.

Surface modification is a promising method to change the surface properties of nanomaterials, but it is limited in enhancing their intrinsic redox nature. In this work, a "filter amplifier" strategy is proposed for the first time to reverse the intrinsic redox nature of materials. This is demonstrated by coating a COF-316 layer with controlled thickness on TiO2 to form core-sheath nanowire arrays. This unique structure forms a Z-scheme heterojunction to function as "a filter amplifier" which can conceal the intrinsic oxidative sites and increase the extrinsic reductive sites. Consequently, the selective response of TiO2 is dramatically reversed from reductive ethanol and methanol to oxidative NO2. Moreover, TiO2@COF-316 provides remarkably improved sensitivity, response, and recovery speed, as well as unusual anti-humidity properties as compared with TiO2. This work not only provides a new strategy to rationally modulate the surface chemistry properties of nanomaterials but also opens an avenue to design high-performance electronic devices with a Z-scheme heterojunction.

The Growth Mechanism of a Conductive MOF Thin Film in Spray-based Layer-by-layer Liquid Phase Epitaxy.

The layer-by-layer liquid-phase epitaxy (LBL-LPE) method is widely used in preparing metal-organic framework (MOF) thin films with the merits of controlling thickness and out-of-plane orientation for superior performances in applications. The LBL-LPE growth mechanism related to the grain boundary, structure defect, and orientation is critical but very challenging to study. In this work, a novel "in-plane self-limiting and self-repairing" thin-film growth mechanism is demonstrated by the combination study of the grain boundary, structure defect, and orientation of Cu3 (HHTP)2 -xC thin film via microscopic analysis techniques and electrical measurements. This mechanism results a desired high-quality MOF thin film with preferred in-plane orientations at its bottom for the first time and is very helpful for optimizing the LBL-LPE method, understanding the growth cycle-dependent properties of MOF thin film, and inspiring the investigations of the biomimetic self-repairing materials.

Enzyme-Inspired Microenvironment Engineering of a Single-Molecular Heterojunction for Promoting Concerted Electrochemical CO2 Reduction.

Challenges remain in the development of novel multifunctional electrocatalysts and their industrial operation on low-electricity pair-electrocatalysis platforms for the carbon cycle. Herein, an enzyme-inspired single-molecular heterojunction electrocatalyst ((NHx )16 -NiPc/CNTs) with specific atomic nickel centers and amino-rich local microenvironments for industrial-level electrochemical CO2 reduction reaction (eCO2 RR) and further energy-saving integrated CO2 electrolysis is designed and developed. (NHx )16 -NiPc/CNTs exhibit unprecedented catalytic performance with industry-compatible current densities, ≈100% Faradaic efficiency and remarkable stability for CO2 -to-CO conversion, outperforming most reported catalysts. In addition to the enhanced CO2 capture by chemisorption, the sturdy deuterium kinetic isotope effect and proton inventory studies sufficiently reveal that such distinctive local microenvironments provide an effective proton ferry effect for improving local alkalinity and proton transfer and creating local interactions to stabilize the intermediate, ultimately enabling the high-efficiency operation of eCO2 RR. Further, by using (NHx )16 -NiPc/CNTs as a bifunctional electrocatalyst in a flow cell, a low-electricity overall CO2 electrolysis system coupling cathodic eCO2 RR with anodic oxidation reaction is developed to achieve concurrent feed gas production and sulfur recovery, simultaneously decreasing the energy input. This work paves the new way in exploring molecular electrocatalysts and electrolysis systems with techno-economic feasibility.

Cascading Photoelectric Detecting and Chemiresistive Gas-Sensing Properties of Pb5 S2 I6 Nanowire Mesh for Multi-Factor Accurate Fire Alarm.

Accurate fire warning is very important for people's life and property safety. The most commonly used fire alarm is based on the detection of a single factor of gases, smoke particles, or temperature, which easily causes false alarm due to complex environmental conditions. A facile multi-factor route for fabricating an accurate analog fire alarm using a Pb5 S2 I6 nanowire mesh based on its photoelectric and gas-sensing dual function is presented. The Pb5 S2 I6 nanowire mesh presents excellent photoelectric detection capabilities and is sensitive to ppm-level NO2 at room temperature. Under the "two-step verification" circuit of light and gas factors, the bimodal simulation fire alarm based on this Pb5 S2 I6 nanowire mesh can resist the interference of complex environmental factors and effectively reduce the false alarm rate.

Achieving a blue-excitable yellow-emitting Ca-LMOF phosphor via water induced phase transformation.

Luminescent metal-organic frameworks (LMOFs) with diverse structural features and promising fluorescence-based applications have attracted wide attention in the past two decades. In this work, a LMOF with the formula [Ca4(tcbpe-F)2(H2O)3] (1, LMOF-411) has been constructed from calcium (Ca) and 1,1,2,2-tetrakis(4-(4-carboxyphenyl)phenyl)ethene (H4tcbpe-F). Compound 1 features a three-dimensional framework with a 10-nodal net topology. Due to the relatively high hydration energy of Ca2+, compound 1 readily transforms into a new phase formulated as [Ca(H2tcbpe-F)(H2O)2] (1') upon exposure to water. Combining experimental characterization and theoretical calculations, we elucidated the mechanism of H2O-induced phase transition from 1 to 1'. Notably, the water induced phase transformation can be detected visibly from the change in luminescence, which originates from the fluorescent linker. Compound 1 emits green light (λ em = 490 nm) under UV excitation, while compound 1' emits bright yellow light (λ em = 550 nm) under blue excitation (450 nm). Compound 1' represents the first Ca based LMOF yellow phosphor and its luminescence quantum yield reaches 68%. It can be coated directly onto a commercial blue light-emitting-diode (LED) chip to fabricate a white LED (WLED).

MOF Nanosheet Reconstructed Two-Dimensional Bionic Nanochannel for Protonic Field-Effect Transistors.

The construction of hydrophobic nanochannel with hydrophilic sites for bionic devices to proximally mimick real bio-system is still challenging. Taking the advantages of MOF chemistry, a highly oriented CuTCPP thin film has been successfully reconstructed with ultra-thin nanosheets to produce abundant two-dimensional interstitial hydrophobic nanochannels with hydrophilic sites. Different from the classical active-layer material with proton transport in bulk, CuTCPP thin film represents a new type of active-layer with proton transport in nanochannel for bionic proton field-effect transistor (H+ -FETs). The resultant device can reversibly modulate the proton transport by varying the voltage on its gate electrode. Meanwhile, it shows the highest proton mobility of ≈9.5×10-3  cm2 V-1 s-1 and highest on-off ratio of 4.1 among all of the reported H+ -FETs. Our result demonstrates a powerful material design strategy for proximally mimicking the structure and properties of bio-systems and constructing bionic electrical devices.

[Ba13Sb36Cl34O54]8-: high-nuclearity cluster for the assembly of nanocluster-based compounds.

Herein, we report two nanocluster-based compounds built on an unprecedented cluster [Ba13Sb36Cl34O54]8-, which represents the first example of a discrete alkaline earth (AE)-containing oxochloride cluster and the largest Sb-based oxohalide cluster to date; the proton-conducting property of the compounds was investigated.

High proton conduction in an excellent water-stable gadolinium metal-organic framework.

A new metal-organic framework with excellent water stability, {H[(N(CH3)4)2][Gd3(NIPA)6]}·3H2O (1, H2NIPA = 5-nitroisophthalic acid), displays a proton conductivity of 7.17 × 10-2 S cm-1 (at 75 °C and 98% relative humidity), which is among the highest values for proton-conducting MOFs.

Correlation between GDF-15 gene polymorphism and the formation of collateral circulation in acute ST-elevation myocardial infarction

Summary Objective: To explore the correlation between growth differentiation factor 15 (GDF-15) -3148C/G polymorphism and the formation of collateral circulation in acute ST-elevation myocardial infarction (STEMI) in Han population of Taiyuan area. Method: The present study included 92 STEMI patients and 56 normal controls based on coronary angiography; STEMI group was divided into collateral group and non-collateral group according to Rentrop's grading method. Polymerase chain reaction (PCR) and DNA sequencing methods were used to detect and analyze the GDF-15 -3148C/G polymorphism in all participants. Results: There was significant difference in GDF-15 -3148C/G CC and GC distribution between STEMI group and control group (p=0.009); the allele frequencies between these two groups were also significant different (p=0.016); and the risk genotype for STEMI was CC with increased OR=2.660. For STEMI group, GDF-15 -3148C/G CC and GC distribution was also significantly different between patients with and without collateral (p=0.048), and CC genotype significantly promote the formation of collateral circulation. However, there were no significant differences in allele frequencies between these two subgroups of STEMI. Conclusion: There was correlation between GDF-15-3148C/G polymorphism and the formation of collateral circulation in patients with acute STEMI.

Layer-by-Layer Assembled Conductive Metal-Organic Framework Nanofilms for Room-Temperature Chemiresistive Sensing.

The utility of electronically conductive metal-organic frameworks (EC-MOFs) in high-performance devices has been limited to date by a lack of high-quality thin film. The controllable thin-film fabrication of an EC-MOF, Cu3 (HHTP)2 , (HHTP=2,3,6,7,10,11-hexahydroxytriphenylene), by a spray layer-by-layer liquid-phase epitaxial method is reported. The Cu3 (HHTP)2 thin film can not only be precisely prepared with thickness increment of about 2 nm per growing cycle, but also shows a smooth surface, good crystallinity, and high orientation. The chemiresistor gas sensor based on this high-quality thin film is one of the best room-temperature sensors for NH3 among all reported sensors based on various materials.

Facile Synthesis of Metal-Loaded Porous Carbon Thin Films via Carbonization of Surface-Mounted Metal-Organic Frameworks.

We report a facile approach to prepare metal-nanocatalyst-incorporated carbon thin films with uniform size distribution via carbonization of surface-mounted metal-organic frameworks (SURMOFs) and metal oxo-clusters loaded SURMOF. The calcinated thin films have high performance of methylene blue degradation and the reduction of nitrobenzene. This study describes a general strategy for preparing various nanoparticle-impregnated porous carbon thin films for applications in catalysis.

Correlation between GDF-15 gene polymorphism and the formation of collateral circulation in acute ST-elevation myocardial infarction.

OBJECTIVE: To explore the correlation between growth differentiation factor 15 (GDF-15) -3148C/G polymorphism and the formation of collateral circulation in acute ST-elevation myocardial infarction (STEMI) in Han population of Taiyuan area. METHOD: The present study included 92 STEMI patients and 56 normal controls based on coronary angiography; STEMI group was divided into collateral group and non-collateral group according to Rentrop's grading method. Polymerase chain reaction (PCR) and DNA sequencing methods were used to detect and analyze the GDF-15 -3148C/G polymorphism in all participants. RESULTS: There was significant difference in GDF-15 -3148C/G CC and GC distribution between STEMI group and control group (p=0.009); the allele frequencies between these two groups were also significant different (p=0.016); and the risk genotype for STEMI was CC with increased OR=2.660. For STEMI group, GDF-15 -3148C/G CC and GC distribution was also significantly different between patients with and without collateral (p=0.048), and CC genotype significantly promote the formation of collateral circulation. However, there were no significant differences in allele frequencies between these two subgroups of STEMI. CONCLUSION: There was correlation between GDF-15-3148C/G polymorphism and the formation of collateral circulation in patients with acute STEMI.