Optical method supported by machine learning for dynamics of C-reactive protein concentrations changes detection in biological matrix samples.

In this article we present the novel spectroscopy method supported with machine learning for real-time detection of infectious agents in wastewater. In the case of infectious diseases, wastewater monitoring can be used to detect the presence of inflammation biomarkers, such as the proposed C-reactive protein, for monitoring inflammatory conditions and mass screening during epidemics for early detection in communities of concern, such as hospitals, schools, and so on. The proposed spectroscopy method supported with machine learning for real-time detection of infectious agents will eliminate the need for time-consuming processes, which contribute to reducing costs. The spectra in range 220-750 nm were used for the study. We achieve accuracy of our prediction model up to 68% with using only absorption spectrophotometer and machine learning. The use of such a set makes the method universal, due to the possibility of using many different detectors.

Efficient removal of 2,4,6-trinitrotoluene (TNT) from industrial/military wastewater using anodic oxidation on boron-doped diamond electrodes.

With growing public concern about water quality particular focus should be placed on organic micropollutants, which are harmful to the environment and people. Hence, the objective of this research is to enhance the security and resilience of water resources by developing an efficient system for reclaiming industrial/military wastewater and protecting recipients from the toxic and cancerogenic explosive compound-2,4,6-trinitrotoluene (TNT), which has been widely distributed in the environment. This research used an anodic oxidation (AO) process on a boron-doped diamond (BDD) electrode for the TNT removal from artificial and real-life matrices: marine water and treated wastewater. During experiments, TNT concentrations were significantly decreased, reaching the anodic degradation efficiency of above 92% within two hours and > 99.9% after six hours of environmental sample treatment. The presented results show the great potential of AO performed on BDD anodes for full-scale application in the industry and military sectors for TNT removal.

Engineering boron and nitrogen codoped carbon nanoarchitectures to tailor molecularly imprinted polymers for PFOS determination.

Per- and polyfluoroalkyl substances (PFAS) have gained significant attention as emerging contaminants due to their persistence, abundance, and adverse health effects. Consequently, the urgent need for ubiquitous and effective sensors capable of detecting and quantifying PFAS in complex environmental samples has become a priority. In this study, we present the development of an ultrasensitive molecularly imprinted polymer (MIP) electrochemical sensor tailored by chemically vapour-deposited boron and nitrogen codoped diamond-rich carbon nanoarchitectures for the selective determination of perfluorooctanesulfonic acid (PFOS). This approach allows for a multiscale reduction of MIP heterogeneities, leading to improved selectivity and sensitivity in PFOS detection. Interestingly, the peculiar carbon nanostructures induce a specific distribution of binding sites in the MIPs that exhibit a strong affinity for PFOS. The designed sensors demonstrated a low limit of detection (1.2 µg L-1) and exhibited satisfactory selectivity and stability. To gain further insights into the molecular interactions between diamond-rich carbon surfaces, electropolymerised MIP, and the PFOS analyte, a set of density functional theory (DFT) calculations was performed. Validation of the sensor's performance was carried out by successfully determining PFOS concentrations in real complex samples, such as tap water and treated wastewater, with average recovery rates consistent with UHPLC-MS/MS results. These findings demonstrate the potential of MIP-supported diamond-rich carbon nanoarchitectures for water pollution monitoring, specifically targeting emerging contaminants. The proposed sensor design holds promise for the development of in situ PFOS monitoring devices operating under relevant environmental concentrations and conditions.

Electrochemical oxidation of landfill leachate using boron-doped diamond anodes: pollution degradation rate, energy efficiency and toxicity assessment.

Electrochemical oxidation (EO), due to high efficiency and small carbon footprint, is regarded as an attractive option for on-site treatment of highly contaminated wastewater. This work shows the effectiveness of EO using three boron-doped diamond electrodes (BDDs) in sustainable management of landfill leachate (LL). The effect of the applied current density (25-100 mA cm-2) and boron doping concentration (B/C ratio: 500 ppm, 10,000 ppm and 15,000 ppm) on the performance of EO was investigated. It was found that, of the electrodes used, the one most effective at COD, BOD20 and ammonia removal (97.1%, 98.8% and 62%, respectively) was the electrode with the lowest boron doping. Then, to better elucidate the ecological role of LLs, before and after EO, cultivation of faecal bacteria and microscopic analysis of total (prokaryotic) cell number, together with ecotoxicity assay (Daphnia magna, Thamnocephalus platyurus and Artemia salina) were combined for the two better-performing electrodes. The EO process was very effective at bacterial cell inactivation using each of the two anodes, even within 2 h of contact time. In a complex matrix of LLs, this is probably a combined effect of electrogenerated oxidants (hydroxyl radicals, active chlorine and sulphate radicals), which may penetrate into the bacterial cells and/or react with cellular components. The toxicity of EO-treated LLs proved to be lower than that of raw ones. Since toxicity drops with increased boron doping, it is believed that appropriate electrolysis parameters can diminish the toxicity effect without compromising the nutrient-removal and disinfection capability, although salinity of LLs and related multistep-oxidation pathways needs to be further elucidated.

Insights into the microbial community of treated wastewater, its year-round variability and impact on the receiver, using cultivation, microscopy and amplicon-based methods.

Apart from chemical constituents, wastewater treatment plant (WWTP) effluents also release microorganisms that can be important to the receiving water bodies either from a sanitary point of view, or taking to the account the biogeochemical potential of the recipients. However, little is known about the treated wastewater microbial community, its composition, seasonal changes, functions and fate in the waters of the receiver. Thus, this study presents a synergistic approach coupling new and traditional methods: analytical chemistry, classical microbiology (cultivation- and microscopy-based methods), as well as Next Generation Sequencing and a quantitative real-time polymerase chain reaction (qPCR). The results show that in terms of bacterial community composition, treated wastewater differed from the environmental samples, irrespectively if they were related or unrelated to the WWTP effluent discharge. The canonical correspondence analysis (CCA) taking into account chemical parameters and taxonomical biodiversity indirectly confirmed the seasonal deterioration of the treated wastewater quality as a result of temperature-driven change of activated sludge community structure and biomass washout (observed also by DAPI staining). Despite seasonal fluctuations of total suspended solids and inter-related parameters (such as COD, BOD, TN, TP), the treated wastewater quality remained within current discharge limits. It was due to treatment processes intensively adjusted by WWTP operators, particularly those necessary to maintain an appropriate rate of autotrophic processes of nitrification and to support biological phosphorus removal. This can explain the observed microbiome composition similarity among WWTP effluents at high taxonomic levels. Obtained data also suggest that besides wastewater treatment efficiency, WWTP effluents are still sources of both human-related microorganisms as well as bacteria equipped in genes involved in N-cycling. Their potential of participation in nutrients cycling in the receivers is widely unknown and require critical attention and better understanding.

Influence of Cement Replacement with Sewage Sludge Ash (SSA) on the Heat of Hydration of Cement Mortar.

The amount of fly ash from the incineration of sewage sludge is increasing all over the world, and its utilization is becoming a serious environmental problem. In the study, a type of sewage sludge ash (SSA) collected directly from the municipal sewage treatment plant was used. Five levels of cement replacement (2.5%, 5%, 7.5%, 10% and 20%) and unchanged water-to-binder (w/b) ratio (0.55) were used. The purpose of the study was to evaluate the effect of sewage sludge ash (SSA) on the hydration heat process of cement mortars. The heat of the hydration of cement mortars was monitored by the isothermal calorimetric method for 7 days at 23 °C. The analysis of chemical composition and particle size distribution was performed on the tested material. The tests carried out have shown that SSA particles have irregular grain morphology and, taking into account the chemical composition consists mainly of oxides such as CaO, P2O5, SiO2 and Al2O3. The concentration of these compounds affects the hydration process of cement mortars doped with SSA. In turn, the content of selected heavy metals in the tested ash should not pose a threat to the environment. Calorimetric studies proved that the hydration process is influenced by the presence of SSA in cement mortars. The studies showed that the rate of heat generation decreased (especially in the initial setting period) with the increasing replacement of cement by SSA, which also reduced the amount of total heat compared to the control cement mortar. With increasing mass of the replacement of cement with SSA up to 20%, the 7-day compressive strength of the mortar samples decreases.

Kinetics of the Organic Compounds and Ammonium Nitrogen Electrochemical Oxidation in Landfill Leachates at Boron-Doped Diamond Anodes.

Electrochemical oxidation (EO) of organic compounds and ammonium in the complex matrix of landfill leachates (LLs) was investigated using three different boron-doped diamond electrodes produced on silicon substrate (BDD/Si)(levels of boron doping [B]/[C] = 500, 10,000, and 15,000 ppm-0.5 k; 10 k, and 15 k, respectively) during 8-h tests. The LLs were collected from an old landfill in the Pomerania region (Northern Poland) and were characterized by a high concentration of N-NH4+ (2069 ± 103 mg·L-1), chemical oxygen demand (COD) (3608 ± 123 mg·L-1), high salinity (2690 ± 70 mg Cl-·L-1, 1353 ± 70 mg SO42-·L-1), and poor biodegradability. The experiments revealed that electrochemical oxidation of LLs using BDD 0.5 k and current density (j) = 100 mA·cm-2 was the most effective amongst those tested (C8h/C0: COD = 0.09 ± 0.14 mg·L-1, N-NH4+ = 0.39 ± 0.05 mg·L-1). COD removal fits the model of pseudo-first-order reactions and N-NH4+ removal in most cases follows second-order kinetics. The double increase in biodegradability index-to 0.22 ± 0.05 (BDD 0.5 k, j = 50 mA·cm-2) shows the potential application of EO prior biological treatment. Despite EO still being an energy consuming process, optimum conditions (COD removal > 70%) might be achieved after 4 h of treatment with an energy consumption of 200 kW·m-3 (BDD 0.5 k, j = 100 mA·cm-2).

Simultaneous opto-electrochemical monitoring of carbamazepine and its electro-oxidation by-products in wastewater.

The growing human impact on aquatic environments deriving from the extensive use of pharmaceuticals and the release of persistent pollutants necessitates the implementation of new, widespread methods for characterising and quantifying such contaminants and their related degradation products. Carbamazepine, 5 H-dibenzo[b,f]azepine-5-carboxamide, (CBZ) is a widely used anti-epileptic drug characterised by limited removal by conventional wastewater treatments and high persistency in the environment. In this work, CBZ detection and quantification was performed in phosphate buffer, as well as in samples of complex matrix-like landfill leachates and treated wastewater originating from a medical facility, and simultaneously by optical and electrochemical methods using a novel transparent carbon-based nanostructured electrode. Coupling electrochemical (differential pulse voltammetry) with optical (UV-visible spectroscopy) methods, it has been possible to reach the limit of detection (LOD) for CBZ at the levels of 4.7 µM for the electrochemical method, 10.3 µM for the spectroscopic method, and 3.6 µM for the opto-electrochemical method. Raman spectroscopy and ultra-high performance liquid chromatography coupled with tandem mass spectrometry techniques were employed to support and validate the combined technique. The novel developed technique showed high selectivity to carbamazepine and its by-products, even in environmental samples. Thus, this environmentally friendly, fast and accurate detection method is believed to be successfully implementable in investigating other pharmaceutical and chemical contaminates of concern.

First evaluation of wastewater discharge influence on marine water contamination in the vicinity of Arctowski Station (Maritime Antarctica).

In Antarctica, waste is generated mainly during scientific research programmes and related logistics. In this study, the impact of wastewater on the western shore of Admiralty Bay was investigated during austral summer in 2017 and 2019. A range of physicochemical parameters and the presence of selected trace metals, formaldehyde and different groups of surfactants were determined in wastewater coming from Arctowski Station and in nearby coastal waters. The presence of selected trace metals (e.g., Cr: 2.7-4.4 µg/L; Zn: 15.2-37.3 µg/L; and Ni: 0.9-23.3 µg/L) and the sums of cationic (0.3-1.5 mg/L), anionic (3.1-1.7 mg/L), and non-ionic (0.6-2.4 mg/L) surfactants in wastewater indicated the potential influence of anthropogenic factors on sea water. The determined surfactants are found in many hygiene products that end up in the waste water tank after human use and, if untreated, can be released into surface waters with discharge. In addition, the levels of some trace metals indicate that they cannot come only from natural sources, but are the result of human activity. The reported data show disturbances in the marine environment caused by non-treated wastewater discharge, e.g. by comparing the obtained results from the values of the no observed effect concentrations (NOECs) on selected Antarctic bioindicators, and provide information for the implementation of proper wastewater treatment at any Antarctic station in the future.

Carbon nanoarchitectures as high-performance electrodes for the electrochemical oxidation of landfill leachate.

Nanomaterials and assemblies of the aforementioned into complex architectures constitute an opportunity to design efficient and selective solutions to widespread and emerging environmental issues. The limited disposal of organic matter in modern landfills generates extremely concentrated leachates characterised by high concentrations of refractory compounds. Conventional biochemical treatment methods are unsuitable, while advanced treatment, such coagulation, reverse osmosis and ultrafiltration can be very costly and generate additional waste. Electrochemical oxidation is an established technique to efficiently mineralise a plethora of recalcitrant pollutants, however the selectivity and efficiency of the process are strongly related to the anode material. For this reason, a nanoarchitectured carbon material has been designed and synthesised to improve the capability of the anode towards the adsorption and decomposition of pollutants. Instead of simple nanostructures, intelligently engineered nanomaterials can come in handy for more efficient advanced treatment techniques. In this study, a carbon nanoarchitecture comprising boron-doped vertically aligned graphene walls (BCNWs) were grown on a boron-doped diamond (BDD) interfacial layer. The results show how the peculiar maze-like morphology and the concurrence of different carbon hybridisations resulted in a higher current exchange density. The BDD performed better for the removal of NH4+ while the BCNW-only sample exhibited a faster deactivation. The BDD/BCNW nanoarchitecture resulted in an enhanced COD removal and a NH4+ removal similar to that of BDD, without the intermediate production of NO2- and NO3-.

Electrochemical oxidation of PFOA and PFOS in landfill leachates at low and highly boron-doped diamond electrodes.

Polyfluorinated alkyl substances (PFASs) may reach landfill leachates (LLs) due to improper waste management. In this study perfluorooctanoate (PFOA) and perfluorooctane sulphonate (PFOS) were used as representatives of PFASs in the decomposition on boron-doped diamond electrodes (BDDs) with high (10k ppm) and low (0.5k ppm) boron doping concentrations. The result shows that although better COD removal efficacies are obtained on the low-doped BDD (59 % after 8 h), the decomposition rate of PFOA and PFOS was not affected by boron doping. In LLs, at the current density of 75 mA/cm2, averaged removal efficiencies of 80 % and 78 % were achieved for PFOA and PFOS, respectively. But besides concentration of mother compounds, the presence of intermediates during electrolysis should be monitored. After 8 h of LL electrolysis, the presence of long-chain degradates C6F13 and C6F13COO- was still observed only in 10k BDD-PFOA assays, while during 0.5k assays C6F13 and C6F13COO- form more intesively at the beginning of the process. This indirectly confirms the more intensive generation of perfluoroalkoxy and hydroxyl radicals and higher susceptibility to electrolysis of PFOA's long-chain intermediates on 0.5k BDD. This is the first study reporting BDD-electrolysis as promising in PFAS removal from the complex matrix of LLs, despite the oxidation of competing LLs components.

The microbial community, its biochemical potential, and the antimicrobial resistance of Enterococcus spp. in Arctic lakes under natural and anthropogenic impact (West Spitsbergen).

The sustainable management of small human communities in the Arctic is challenging. In this study, both a water supply system (Lake 1) under the natural impact of a bird-nesting area, and a wastewater receiver (Lake 2) were analysed in the vicinity of the Polish Polar Station on West Spitsbergen. Microbial community composition, abundance and activity were assessed in samples of the treated wastewater, lake water and sediments using next-generation sequencing and direct microscope counts. Special attention was given to the faecal indicator, Enterococcus spp., whose occurrence and antimicrobial resistance were tested in water and wastewater samples. The results indicate that Lake 1, at a tundra stream discharge (L-TS) and a water supply point (L-WS) were dominated by three phyla: Proteobacteria (57-58%) Bacteroidetes (27-29%) and Actinobacteria (9-10%), showing similar microbial composition up to the genus level. This suggests that nutrient-rich runoff from the bird colony was retained by surrounding tundra vegetation and reached Lake 1 at L-TS to a limited extent. Lake 2, being the wastewater recipient (WW-R), mirrors to some extent the core phyla of treated wastewater (WW-E), but in different shares. This suggests the possible washout of wastewater-related bacteria with activated sludge flocs, which was also supported by the microscopic observations. Compared to Lake 1, in WW-R an increase in all tested parameters was noted: total prokaryotic cell number, average cell volume, prokaryotic biomass and live cell percentage. The presence of Enterococcus spp. antibiotic resistance patterns highlight the importance of human associated microbiome and resistome dissemination via wastewater discharge. Moreover, it can be expected that temperature-related biochemical processes (e.g. nutrient cycling) may be accelerated by the ongoing climate change. Thus, proper wastewater treatment requires locally adapted solutions in increasingly visited and inhabited polar regions. Additionally, microbial community discharged to the environment with the treated wastewater, requires critical attention.

Differences between selected volatile aromatic compound concentrations in sludge samples in various steps of wastewater treatment plant operations.

Sewage sludge, one of the main wastes generated during wastewater treatment, constitutes an important source of emissions of volatile chemical compounds such as volatile aromatic compounds These substances may undergo various changes as a result of operations and unit processes, which affects their concentrations in sewage sludge. An important factor determining the potential hazardousness of volatile organic compounds is the quality of wastewater delivered to wastewater treatment plants and the technical and equipment solutions applied to wastewater. In this study, a rapid and sensitive headspace gas chromatography method, coupled with tandem mass spectrometry using the standard addition method, was developed for the determination of selected volatile aromatic compounds in sewage sludge samples collected at different stages from three wastewater treatment plants located in Poland. This study attempted to assess the relationship between differences in the emissions of representative VACs and the given stage of the technological process within three analysed wastewater treatment plants. Toluene was detected with the highest frequency in analysed samples, at concentrations varying from 0.234 ± 0.035 ng/g of sludge to 28.3*102±3.2*102 ng/g of sludge. The highest concentration levels were determined for p-cresol, with concentrations ranging from 44.0*101±5.6*101 ng/g of sludge (sludge from aerobic chamber, wastewater treatment plant no.2) to 47.7*102±6.9*102 ng/g of sludge (sludge from aerobic chamber, wastewater treatment plant no.1), while the lowest concentration levels were observed for chlorobenzene, with concentrations ranging from 0.1300 ±â€¯0.0030 ng/g of sludge (sludge from anaerobic chamber, wastewater treatment plant no.2), to 0.2606 ±â€¯0.0046 ng/g of sludge (primary sludge, wastewater treatment plant no.1). The repeatability of the method was better than 10%, with accuracy levels in the ranges 89%-108%.Wastewater treatment technologies and residual sludge management in the selected wastewater treatment plantsinfluenced volatile aromatic compounds emission. Furthermore, the diversity of the wastewater quality, depending on the catchment area, is also an important factor determining the differentiation in volatile aromatic compounds emission. The microbial composition of raw wastewater highly influenced not only the treatment effectiveness of wastewater treatment plants but also the production of intermediate products, such as volatile aromatic compounds, which may contribute to odour emissions.

Landfill leachates and wastewater of maritime origin as possible sources of endocrine disruptors in municipal wastewater.

In this study, wastewater from municipal services, such as a port wastewater reception facility (PRF-WW) and a municipal solid waste plant (MSWP), was tested for the presence of the suspected endocrine-disrupting compounds phthalates (PAEs) and bisphenol A (BPA). PAEs and BPA were found in this study in high concentrations in raw wastewater obtained from passenger ships (RMT-WWs) (up to 738 µg/L and 957 µg/L, respectively) collected in the Port of Gdynia and in landfill leachates (LLs) (up to 536 µg/L and up to 2202 µg/L, respectively) from a MSWP located near Gdynia. In particular, the presence of reprotoxic di(2-ethylhexyl) phthalate (DEHP, up to 536 µg/L in LLs and up to 738 µg/L in RMT-WWs) requires further action because if this compound, as well as other PAEs and BPA, is not degraded by activated sludge microorganisms, it may reach receiving waters and adversely impact aquatic organisms. Therefore, PAEs and BPA should be removed either during the onsite pretreatment of tested industrial wastewater or during tertiary treatment at municipal wastewater treatment plants (WWTPs, representing end-of-pipe technology). Graphical abstract.

The evaluation of COD fractionation and modeling as a key factor for appropriate optimization and monitoring of modern cost-effective activated sludge systems.

A study was conducted to characterize the raw wastewater entering a modern cost effective municipal WWTP in Poland using two approaches; 1) a combination of modeling and carbonaceous oxygen demand (COD) fractionation using respirometric test coupled with model estimation (RT-ME) and 2) flocculation/filtration COD fractionation method combined with BOD measurements (FF-BOD). It was observed that the particulate fractions of COD obtained using FF-BOD method was higher than those estimated by RT-ME approach. Contrary to the above, the values of inert soluble fraction evaluated by FF-BOD method was significantly lower than RT-ME approach (2.4% and 3.9% respectively). Furthermore, the values for low colloidal and particulate fractions as well as soluble inert fractions were different than expected from a typical municipal wastewater. These observations suggest that even at low load (10% of the total wastewater treatment inflow), the industrial wastewater composition can significantly affect the characteristics of municipal wastewater which could also affect the performance and accuracy of respirometric tests. Therefore, in such cases, comparison of the respirometric tests with flocculation/filtration COD/BOD measurements are recommended. Oxygen uptake rate profile with settled wastewater and/or after coagulation-flocculation, however, could still be recommended as a "rapid" control method for monitoring/optimising modern cost-effective wastewater treatment plants.

Efficiency of landfill leachate treatment in a MBR/UF system combined with NF, with a special focus on phthalates and bisphenol A removal.

In this study, a pilot-scale membrane bioreactor (MBR) was operated at a municipal solid waste plant (MSWP) to treat a mixture of landfill leachates (LLs) obtained from modern (MP-LLs) and previous (PP-LLs) waste cells. The MBR unit combined anoxic and aerobic zones with external ultra- and nanofiltration (MBR/UF and MBR/UF/NF, respectively). In addition to the removal of macropollutants, special attention was given to phthalates (PAEs) and bisphenol A (BPA). According to the obtained results, the MBR/UF system with acclimated biomass was effective for treating LLs, and the obtained effluent was generally similar in quality to raw municipal wastewater. The MBR biomass showed high potential for BPA and PAEs biodegradation/biotransformation as confirmed by a metagenomic approach. Only a high chloride concentration (1960 mg Cl-/L), which was twice the value acceptable by Polish regulations for industrial wastewater entering the municipal wastewater system, justifies the additional usage of the NF unit. Notably, a decreasing amount of biodegradable organic matter in MBR influent is expected with time because of changes in the biochemistry of modern waste cells; therefore, an external carbon source would probably be needed to support denitrification. However, the cooccurrence of an aerobic and anaerobic ammonia-oxidizing community with denitrifying bacteria provides the opportunity for advanced removal of nitrogen and organic carbon.

Fate and significance of phthalates and bisphenol A in liquid by-products generated during municipal solid waste mechanical-biological pre-treatment and disposal.

Samples of liquid by-products generated by municipal solid waste plants (MSWPs) were tested for the presence of phthalates (PAEs) and bisphenol A (BPA). The results indicated that the wastewater generated during mechanical (sorting unit - SU) and biological (composting unit - CU) pre-treatment (MBT) of residual (mixed) solid waste is a significant source of these compounds. The concentrations of PAEs (up to 32222µg/L) and BPA (up to 1795µg/L) in the SU and CU wastewaters were generally higher than those in landfill leachates tested in this and other studies. To date, MBT wastewaters have been poorly studied and are usually overlooked. However, in this study, despite their relatively small quantities, they constituted an important load of ammonia (up to 1610mg/L) and organic matter (COD up to 52980mg/L). Thus, to apply an effective treatment, it is critical to monitor the current quality and quantity of all liquid by-products generated at MSWPs and to prioritize the (micro)pollutants of concern.

A modern solid waste management strategy--the generation of new by-products.

To benefit the environment and society, EU legislation has introduced a 'zero waste' strategy, in which waste material should be converted to resources. Such legislation is supported by the solid waste hierarchy concept, which is a set of priorities in waste management. Under this concept, municipal solid waste plants (MSWPs) should be equipped with sorting and recycling facilities, composting/incineration units and landfill prisms for residual bulk disposal. However, each of the aforementioned facilities generates by-products that must be treated. This project focuses on the leachates from landfill prisms, including modern prism (MP) that meet EU requirements and previous prism (PP) that provide for the storage of permitted biodegradable waste as well as technological wastewaters from sorting unit (SU) and composting unit (CU), which are usually overlooked. The physico-chemical parameters of the liquid by-products collected over 38 months were supported by quantitative real-time PCR (qPCR) amplifications of functional genes transcripts and a metagenomic approach that describes the archaeal and bacterial community in the MP. The obtained data show that SU and especially CU generate wastewater that is rich in nutrients, organic matter and heavy metals. Through their on-site pre-treatment and recirculation via landfill prisms, the landfill waste decomposition process may be accelerated because of the introduction of organic matter and greenhouse gas emissions may be increased. These results have been confirmed by the progressive abundance of both archaeal community and the methyl coenzyme M reductase (mcrA) gene. The resulting multivariate data set, supported by a principal component analysis, provides useful information for the design, operation and risk assessment of modern MSWPs.

Antimicrobial resistance of Pseudomonas spp. isolated from wastewater and wastewater-impacted marine coastal zone.

In this study, species distribution and antimicrobial susceptibility of cultivated Pseudomonas spp. were studied in influent (INF), effluent (EFF), and marine outfall (MOut) of wastewater treatment plant (WWTP). The susceptibility was tested against 8 antimicrobial classes, active against Pseudomonas spp.: aminoglycosides, carbapenems, broad-spectrum cephalosporins from the 3rd and 4th generation, extended-spectrum penicillins, as well as their combination with the ß-lactamase inhibitors, monobactams, fluoroquinolones, and polymyxins. Among identified species, resistance to all antimicrobials but colistin was shown by Pseudomonas putida, the predominant species in all sampling points. In other species, resistance was observed mainly against ceftazidime, ticarcillin, ticarcillin-clavulanate, and aztreonam, although some isolates of Pseudomonas aeruginosa, Pseudomonas fluorescens, Pseudomonas pseudoalcaligenes, and Pseudomonas protegens showed multidrug-resistance (MDR) phenotype. Among P. putida, resistance to ß-lactams and to fluoroquinolones as well as multidrug resistance become more prevalent after wastewater treatment, but the resistance rate decreased in marine water samples. Obtained data, however, suggests that Pseudomonas spp. are equipped or are able to acquire a wide range of antibiotic resistance mechanisms, and thus should be monitored as possible source of resistance genes.