Inverted Perovskite Photovoltaics Using Flame Spray Pyrolysis Solution Based CuAlO2/Cu-O Hole-Selective Contact.

We present the functionalization process of a conductive and transparent CuAlO2/Cu-O hole-transporting layer (HTL). The CuAlO2/Cu-O powders were developed by flame spray pyrolysis and their stabilized dispersions were treated by sonication and centrifugation methods. We show that when the supernatant part of the treated CuAlO2/Cu-O dispersions is used for the development of CuAlO2/Cu-O HTLs the corresponding inverted perovskite-based solar cells show improved functionality and power conversion efficiency of up to 16.3% with negligible hysteresis effect.

Efficient magnetic recycling of covalently attached enzymes on carbon-coated metallic nanomagnets.

In the pursuit of robust and reusable biocatalysts for industrial synthetic chemistry, nanobiotechnology is currently taking a significant part. Recently, enzymes have been immobilized on different nanoscaffold supports. Carbon coated metallic nanoparticles were found to be a practically useful support for enzyme immobilization due to their large surface area, high magnetic saturation, and manipulatable surface chemistry. In this study carbon coated cobalt nanoparticles were chemically functionalized (diazonium chemistry), activated for bioconjugation (N,N-disuccinimidyl carbonate), and subsequently used in enzyme immobilization. Three enzymes, ß-glucosidase, α-chymotrypsin, and lipase B were successfully covalently immobilized on the magnetic nonsupport. The enzyme-particle conjugates formed retained their activity and stability after immobilization and were efficiently recycled from milliliter to liter scales in short recycle times.

Concept and first experimental results of a new ferromagnetic assist device for extra-aortic counterpulsation.

OBJECTIVES: Based on a ferromagnetic silicone cuff for extra-aortic counterpulsation, a new assist device concept was developed. The driving force is generated by an external magnetic field, which leads to contraction of a soft magnetic cuff. The force generation capacity of the device was tested in a silicone aorta model. METHODS: Magnetic elastomers can be constructed through dispersion of micro- or nanoparticles in polymer matrices and were designed to act as soft actuators. Two magnetically active silicone cuffs were produced with a nanomagnet loading of 250 wt% (Cuff 1) and a micromagnet loading of 67 wt% (Cuff 2). The magnetic cuffs were applied on a silicone aorta model and contracted against hydrostatic pressure. RESULTS: A full contraction of Cuff 1 was possible against a maximal hydrostatic pressure of 30 cmH2O (22 mmHg) at a magnetic flux density of 0.4 T (Tesla) and 65 cmH2O (48 mmHg) at a magnetic flux density of 1.2 T. A 50% contraction of Cuff 2 was possible against a maximal hydrostatic pressure of 80 cmH2O (59 mmHg) at a magnet-cuff-distance (MCD) of 0 cm. At MCDs of 1 and 2 cm a 50% contraction was possible against 33 cmH2O (24 mmHg) and 10 cmH2O (7 mmHg), respectively. CONCLUSIONS: Combining the advantages of magnetic elastomers with the principle of extra-aortic counterpulsation in a new assist device concept avoids the need for anticoagulation (no contact with bloodstream). With regard to the magnetic principle of action, no intra- to extracorporeal connection is needed. More experimental work is needed to further increase the force generated by the silicone cuff and to transfer the device concept into an in vivo setting.

Pressureless mechanical induction of stem cell differentiation is dose and frequency dependent.

Movement is a key characteristic of higher organisms. During mammalian embryogenesis fetal movements have been found critical to normal tissue development. On the single cell level, however, our current understanding of stem cell differentiation concentrates on inducing factors through cytokine mediated biochemical signaling. In this study, human mesenchymal stem cells and chondrogenesis were investigated as representative examples. We show that pressureless, soft mechanical stimulation precipitated by the cyclic deformation of soft, magnetic hydrogel scaffolds with an external magnetic field, can induce chondrogenesis in mesenchymal stem cells without any additional chondrogenesis transcription factors (TGF-ß1 and dexamethasone). A systematic study on the role of movement frequency revealed a classical dose-response relationship for human mesenchymal stem cells differentiation towards cartilage using mere mechanical stimulation. This effect could even be synergistically amplified when exogenous chondrogenic factors and movement were combined.

Ferromagnetic inks facilitate large scale paper recycling and reduce bleach chemical consumption.

Deinking is a fundamental part of paper recycling. As the global paper consumption rises and exceeds even the annual paper production, recycling of this raw material is of high importance. Magnetic ink based on carbon coated magnetic nanoparticles enables an alternative approach to state of the art paper deinking. Magnetic deinking comprises three steps (preselection, washing, and magnetic separation of fibers). Preseparation of printed from nonprinted scraps of paper is feasible and reduces the paper mass which has to be fed into a deinking process. A consecutive washing process removes surficial magnetic ink that can be collected by application of a permanent magnet. Still, printed parts are subjected to a further continuous magnetic deinking step, where magnetic and nonmagnetic paper fibers can be separated. Magnetic deinking of a model print allows recovery of more than 80% of bright fibers without any harsh chemical treatment and the re-collection of more than 82% of magnetic ink.

Nanocomposites of high-density polyethylene with amorphous calcium phosphate: in vitro biomineralization and cytocompatibility of human mesenchymal stem cells.

Polyethylene is widely used as a component of implants in medicine. Composites made of high-density polyethylene (HDPE) containing different amounts of amorphous calcium phosphate nanoparticles were investigated concerning their in vitro biomedical performance. The nanoparticles were produced by flame spray synthesis and extruded with HDPE, the latter complying with Food and Drug Administration regulations. Mechanical properties such as Young's modulus and contact angle as well as in vitro biomineralization of the nanocomposites hot-pressed into thin films were evaluated. The deposition of a hydroxyapatite layer occurred upon immersion in simulated body fluid. Additionally, a cell culture study with human mesenchymal stem cells for six weeks allowed a primary assessment of the cytocompatibility. Viability assays (alamarBlue and lactate dehydrogenase detection) proved the absence of cytotoxic effects of the scaffolds. Microscopic images after hematoxylin and eosin staining confirmed typical growth and morphology. A preliminary experiment analyzed the alkaline phosphatase activity after two weeks. These findings motivate further investigations on bioactive HDPE in bone tissue engineering.

Magnetic silyl scaffold enables efficient recycling of protecting groups.

A novel organic/inorganic hybrid material comprising carboncoated cobalt nanoparticles and a poly(benzylchloride)styrene shell is the first magnetic support that complies with important requirements for immobilized reagents and scavengers, that is, stability under harsh conditions (e.g., acids), sufficient loading (up to 2 mmol g(-1)), and satisfying magnetization. The durability of the scaffold was demonstrated by immobilization of a trialkylsilane reagent, which served as a "magnetic" protecting group for a number of primary and secondary alcohols. Importantly, the scaffold could be efficiently separated, recycled, and reused after alcohol cleavage (HF·pyridine) via regeneration of the silyl chloride moiety with BCl(3).

Biocompatibility and Bone Formation of Flexible, Cotton Wool-like PLGA/Calcium Phosphate Nanocomposites in Sheep.

BACKGROUND: The purpose of this preliminary study was to assess the in vivo performance of synthetic, cotton wool-like nanocomposites consisting of a biodegradable poly(lactide-co-glycolide) fibrous matrix and containing either calcium phosphate nanoparticles (PLGA/CaP 60:40) or silver doped CaP nanoparticles (PLGA/Ag-CaP 60:40). Besides its extraordinary in vitro bioactivity the latter biomaterial (0.4 wt% total silver concentration) provides additional antimicrobial properties for treating bone defects exposed to microorganisms. MATERIALS AND METHODS: Both flexible artificial bone substitutes were implanted into totally 16 epiphyseal and metaphyseal drill hole defects of long bone in sheep and followed for 8 weeks. Histological and histomorphological analyses were conducted to evaluate the biocompatibility and bone formation applying a score system. The influence of silver on the in vivo performance was further investigated. RESULTS: Semi-quantitative evaluation of histology sections showed for both implant materials an excellent biocompatibility and bone healing with no resorption in the adjacent bone. No signs of inflammation were detectable, either macroscopically or microscopically, as was evident in 5 µm plastic sections by the minimal amount of inflammatory cells. The fibrous biomaterials enabled bone formation directly in the centre of the former defect. The area fraction of new bone formation as determined histomorphometrically after 8 weeks implantation was very similar with 20.5 ± 11.2 % and 22.5 ± 9.2 % for PLGA/CaP and PLGA/Ag-CaP, respectively. CONCLUSIONS: The cotton wool-like bone substitute material is easily applicable, biocompatible and might be beneficial in minimal invasive surgery for treating bone defects.

Immobilized ß-cyclodextrin on surface-modified carbon-coated cobalt nanomagnets: reversible organic contaminant adsorption and enrichment from water.

Surface-modified magnetic nanoparticles can be used in extraction processes as they readily disperse in common solvents and combine high saturation magnetization with excellent accessibility. Reversible and recyclable adsorption and desorption through solvent changes and magnetic separation provide technically attractive alternatives to classical solvent extraction. Thin polymer layered carbon-coated cobalt nanoparticles were tagged with ß-cyclodextrin. The resulting material reversibly adsorbed organic contaminants in water within minutes. Isolation of the immobilized inclusion complex was easily carried out within seconds by magnetic separation due to the strong magnetization of the nanomagnets (metal core instead of hitherto used iron oxide). The trapped molecules were fully and rapidly recovered by filling the cyclodextrin cavity with a microbiologically well accepted substitute, e.g., benzyl alcohol. Phenolphthalein was used as a model compound for organic contaminants such as polychlorinated dibenzodioxins (PCDDs) or bisphenol A (BPA). Fast regeneration of nanomagnets (compared to similar cyclodextrin-based systems) under mild conditions resulted in 16 repetitive cycles (adsorption/desorption) at full efficiency. The high removal and regeneration efficiency was examined by UV-vis measurements at chemical equilibrium conditions and under rapid cycling (5 min). Experiments at ultralow concentrations (160 ppb) underline the high potential of cyclodextrin modified nanomagnets as a fast, recyclable extraction method for organic contaminants in large water streams or as an enrichment tool for analytics.

Crosslinking metal nanoparticles into the polymer backbone of hydrogels enables preparation of soft, magnetic field-driven actuators with muscle-like flexibility.

The combination of force and flexibility is at the core of biomechanics and enables virtually all body movements in living organisms. In sharp contrast, presently used machines are based on rigid, linear (cylinders) or circular (rotator in an electrical engine) geometries. As a potential bioinspired alternative, magnetic elastomers can be realized through dispersion of micro- or nanoparticles in polymer matrices and have attracted significant interest as soft actuators in artificial organs, implants, and devices for controlled drug delivery. At present, magnetic particle loss and limited actuator strength have restricted the use of such materials to niche applications. We describe the direct incorporation of metal nanoparticles into the backbone of a hydrogel and application as an ultra-flexible, yet strong magnetic actuator. Covalent bonding of the particles prevents metal loss or leaching. Since metals have a far higher saturation magnetization and higher density than oxides, the resulting increased force/volume ratio afforded significantly stronger magnetic actuators with high mechanical stability, elasticity, and shape memory effect.