Rapid Analysis of ADP-Ribosylation Dynamics and Site-Specificity Using TLC-MALDI.

Poly(ADP-ribose) polymerases, PARPs, transfer ADP-ribose onto target proteins from nicotinamide adenine dinucleotide (NAD+). Current mass spectrometric analytical methods require proteolysis of target proteins, limiting the study of dynamic ADP-ribosylation on contiguous proteins. Herein, we present a matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) method that facilitates multisite analysis of ADP-ribosylation. We observe divergent ADP-ribosylation dynamics for the catalytic domains of PARPs 14 and 15, with PARP15 modifying more sites on itself (+3-4 ADP-ribose) than the closely related PARP14 protein (+1-2 ADP-ribose)─despite similar numbers of potential modification sites. We identify, for the first time, a minimal peptide fragment (18 amino-acids) that is preferentially modified by PARP14. Finally, we demonstrate through mutagenesis and chemical treatment with hydroxylamine that PARPs 14/15 prefer acidic residues. Our results highlight the utility of MALDI-TOF in the analysis of PARP target modifications and in elucidating the biochemical mechanism governing PARP target selection.

Changes at a Critical Branchpoint in the Anthocyanin Biosynthetic Pathway Underlie the Blue to Orange Flower Color Transition in Lysimachia arvensis.

Anthocyanins are the primary pigments contributing to the variety of flower colors among angiosperms and are considered essential for survival and reproduction. Anthocyanins are members of the flavonoids, a broader class of secondary metabolites, of which there are numerous structural genes and regulators thereof. In western European populations of Lysimachia arvensis, there are blue- and orange-petaled individuals. The proportion of blue-flowered plants increases with temperature and daylength yet decreases with precipitation. Here, we performed a transcriptome analysis to characterize the coding sequences of a large group of flavonoid biosynthetic genes, examine their expression and compare our results to flavonoid biochemical analysis for blue and orange petals. Among a set of 140 structural and regulatory genes broadly representing the flavonoid biosynthetic pathway, we found 39 genes with significant differential expression including some that have previously been reported to be involved in similar flower color transitions. In particular, F3'5'H and DFR, two genes at a critical branchpoint in the ABP for determining flower color, showed differential expression. The expression results were complemented by careful examination of the SNPs that differentiate the two color types for these two critical genes. The decreased expression of F3'5'H in orange petals and differential expression of two distinct copies of DFR, which also exhibit amino acid changes in the color-determining substrate specificity region, strongly correlate with the blue to orange transition. Our biochemical analysis was consistent with the transcriptome data indicating that the shift from blue to orange petals is caused by a change from primarily malvidin to largely pelargonidin forms of anthocyanins. Overall, we have identified several flavonoid biosynthetic pathway loci likely involved in the shift in flower color in L. arvensis and even more loci that may represent the complex network of genetic and physiological consequences of this flower color polymorphism.

Multi-Institution Research and Education Collaboration Identifies New Antimicrobial Compounds.

New antibiotics are urgently needed to address increasing rates of multidrug resistant infections. Seventy-six diversely functionalized compounds, comprising five structural scaffolds, were synthesized and tested for their ability to inhibit microbial growth. Twenty-six compounds showed activity in the primary phenotypic screen at the Community for Open Antimicrobial Drug Discovery (CO-ADD). Follow-up testing of active molecules confirmed that two unnatural dipeptides inhibit the growth of Cryptococcus neoformans with a minimum inhibitory concentration (MIC) ≤ 8 µg/mL. Syntheses were carried out by undergraduate students at five schools implementing Distributed Drug Discovery (D3) programs. This report showcases that a collaborative research and educational process is a powerful approach to discover new molecules inhibiting microbial growth. Educational gains for students engaged in this project are highlighted in parallel to the research advances. Aspects of D3 that contribute to its success, including an emphasis on reproducibility of procedures, are discussed to underscore the power of this approach to solve important research problems and to inform other coupled chemical biology research and teaching endeavors.

Sequence Changes Modulate Peptoid Self-Association in Water.

Peptoids, N-substituted glycine oligomers, are a class of diverse and sequence-specific peptidomimetics with wide-ranging applications. Advancing the functional repertoire of peptoids to emulate native peptide and protein functions requires engineering peptoids that adopt regular secondary and tertiary structures. An understanding of how changes to peptoid sequence change structural features, particularly in water-soluble systems, is underdeveloped. To address this knowledge gap, five 15-residue water-soluble peptoids that include naphthalene-functionalized side chains were designed, prepared, and subjected to a structural study using a palette of techniques. Peptoid sequence designs were based on a putative amphiphilic helix peptoid bearing structure-promoting (S)-N-(1-naphthylethyl)glycine residues whose self-association in water has been studied previously. New peptoid variants reported here include sequence changes that influenced peptoid conformational flexibility, functional group patterning (amphiphilicity), and hydrophobicity. Peptoid structures were evaluated and compared using circular dichroism spectroscopy, fluorescence spectroscopy, and size exclusion chromatography. Spectral data confirmed that sequence changes alter peptoids' degree of assembly and the organization of self-assembled structures in aqueous solutions. Insights gained in these studies will inform the design of new water-soluble peptoids with regular structural features, including desirable higher-order (tertiary and quaternary) structural features.

Diverse N-Substituted Azole-Containing Amino Acids as Building Blocks for Cyclopeptides.

The preparation of 16 oxazole- or thiazole-containing amino esters bearing a wide array of N-substitution is reported. These were accessed in 40-92% yield via an AgClO4-promoted substitution reaction between a primary amine and a chloromethyl-functionalized thiazole or oxazole. These new synthetic building blocks will be useful for the preparation of new cyclopeptide analogues bearing heterocyclic backbone modifications. Four macrocyclic N-substituted oligoamides that include thiazole or oxazole heterocycles were obtained, following cyclooligomerization reactions of azole-modified N-substituted amino acids.

Length and Charge of Water-Soluble Peptoids Impact Binding to Phospholipid Membranes.

In this study, we provide a quantitative description of the adsorption of water-soluble N-substituted glycine oligomers (peptoids) to supported lipid bilayers that mimic mammalian plasma membranes. We prepared a small array of systematically varied peptoid sequences ranging in length from 3 to 15 residues. Using the nonlinear optical method second harmonic generation (SHG), we directly monitored adsorption of aqueous solutions of 3- and 15-residue peptoids to phospholipid membranes of varying physical phase, cholesterol content, and head group charge in physiologically relevant pH buffer conditions without the use of extrinsic labels. Equilibrium binding constants and relative surface coverages of adsorbed peptoids were determined from fits to the Langmuir model. Three- and 15-residue peptoids did not interact with cholesterol-containing lipids or charged lipids in the same manner, suggesting that a peptoid's adsorption mechanism changes with sequence length. In a comparison of four three-residue peptoids, we observed a correlation between equilibrium binding constants and calculated log D7.4 values. Cationic charge modulated surface coverage. Principles governing how peptoid sequence and membrane composition alter peptoid-lipid interactions may be extended to predict physiological effects of peptoids used as therapeutics or as coatings in medical devices.

Peptoids advance multidisciplinary research and undergraduate education in parallel: Sequence effects on conformation and lipid interactions.

Peptoids are versatile peptidomimetic molecules with wide-ranging applications from drug discovery to materials science. An understanding of peptoid sequence features that contribute to both their three-dimensional structures and their interactions with lipids will expand functions of peptoids in varied fields. Furthermore, these topics capture the enthusiasm of undergraduate students who prepare and study diverse peptoids in laboratory coursework and/or in faculty led research. Here, we present the synthesis and study of 21 peptoids with varied functionality, including 19 tripeptoids and 2 longer oligomers. We observed differences in fluorescence spectral features for 10 of the tripeptoids that correlated with peptoid flexibility and relative positioning of chromophores. Interactions of representative peptoids with sonicated glycerophospholipid vesicles were also evaluated using fluorescence spectroscopy. We observed evidence of conformational changes effected by lipids for select peptoids. We also summarize our experiences engaging students in peptoid-based projects to advance both research and undergraduate educational objectives in parallel.

Solution effects on the self-association of a water-soluble peptoid.

A desire to replicate the structural and functional complexity of proteins with structured, sequence-specific oligomers motivates study of the structural features of water-soluble peptoids (N-substituted glycine oligomers). Understanding the molecular-level details of peptoid self-assembly in water is essential to advance peptoids' application as novel materials. Peptoid 1, an amphiphilic, putatively helical peptoid previously studied in our laboratory, shows evidence of self-association in aqueous solution. In this work, we evaluate how changes to aqueous solution conditions influence the self-association of 1. We report that changes to pH influence the fluorescence and CD spectroscopic features as well as the peptoid's interaction with a solvatochromic fluorophore and its apparent size as estimated by size exclusion chromatography. Addition of guanidine hydrochloride and ammonium sulfate also modulate spectroscopic features of the peptoid, its interaction with a solvatochromic fluorophore, and its elution in size exclusion chromatography. These data suggest that the ordering of the self-assembly changes in response to pH and with solvent additives and is more ordered at higher pH and in the presence of guanidine hydrochloride. The deeper understanding of the self-association of 1 afforded by these studies informs the design of new stimuli-responsive peptoids with stable tertiary or quaternary structures.

Solid-Phase Synthesis of Azole-Comprising Peptidomimetics and Coordination of a Designed Analog to Zn2.

Peptidomimetics that can coordinate transition metals have a variety of potential applications as catalysts, sensors, or materials. A new modular peptidomimetic scaffold, the "azole peptoid", is introduced here. We report methods for the solid-phase synthesis of eleven examples of trimeric N-substituted oligoamides that include oxazole- or thiazole-functionalized backbones. The products prepared comprise a diversity of functionality, including a metal-coordinating terpyridine group. The modular synthetic approach enables ready preparation of analogs for specific applications. To highlight a potential use of this new synthetic scaffold, a trimeric azole peptoid functionalized with a terpyridine residue was prepared and studied. The characteristic 2:1 ligand:metal binding of this terpyridine-functionalized azole peptoid to Zn2+ in aqueous solution was observed. These studies introduce azole peptoids as a useful class of biomimetic molecules for further study and application.

A Thermodynamic Description of the Adsorption of Simple Water-Soluble Peptoids to Silica.

The first report of a water-soluble peptoid adsorbed to silica monitored by second harmonic generation (SHG) at the liquid/solid interface is presented here. The molecular insights gained from these studies will inform the design and preparation of novel peptoid coatings. Simple 6- and 15-residue peptoids were dissolved in phosphate buffered saline and adsorbed to bare silica surfaces. Equilibrium binding constants and relative surface concentrations of adsorbed peptoids were determined from fits to the Langmuir model. Complementary fluorescence spectroscopy studies were used to quantify the maximum surface excess. Binding constants, determined here by SHG, were comparable to those previously reported for cationic proteins and small molecules. Enthalpies and free energies of adsorption were determined to elucidate thermodynamic driving forces. Circular dichroism spectra confirm that minimal conformational changes occur when peptoids are adsorbed to silica while pH studies indicate that electrostatic interactions impact adsorption.

Self-association of water-soluble peptoids comprising (S)-N-1-(naphthylethyl)glycine residues.

Peptoids (N-substituted glycine oligomers) are widely used peptidomimetics, and an enhanced understanding of their structures is needed to expand their utility, particularly in aqueous applications. We report the synthesis and structural study of four water-soluble peptoids that include strongly helix-promoting (S)-N-1-(naphthylethyl)glycine residues. Peptoid structure changes with both peptoid length and solvent composition. Multiple data support the self-association of the longest peptoid studied here, 1, via hydrophobic interactions in aqueous solutions.

A fluorescent peptoid pH-sensor.

Peptoids, N-substituted glycine oligomers, can adopt stable three-dimensional structures and have found diverse application as peptide surrogates and as nanomaterials. In this report, we have expanded peptoid function to include pH sensing by coupling pH-induced peptoid conformational changes with fluorescence intensity changes. We report two new peptoids (2 and 3) that comprise carboxylic-acid functionalized side chains and undergo conformational rearrangement in response to pH. Peptoids 2 and 3 are also labeled at one side-chain with an environmentally sensitive fluorophore, 4-N,N-dimethylamino-1,8-naphthalimide (4DMN). The fluorescence intensity of 2 varies 24-fold over the pH range studied. These spectroscopic properties make 2 a sensitive, biocompatible pH sensor.

Use of the environmentally sensitive fluorophore 4-N,N-dimethylamino-1,8-naphthalimide to study peptoid helix structures.

Peptoids, oligomers of N-substituted glycine, have been valuable targets for study and diverse application as peptidomimetics and as nanomaterials. Their conformational heterogeneity has made the study of peptoid structures using high-resolution analyses challenging, limiting our understanding of the physiochemical features that mediate peptoid folding. Here, we introduce a new method for the study of peptoid structure that relies on the environmentally sensitive fluorescence properties of 4-N,N-dimethylamino-1,8-naphthalimide (4-DMN). We have prepared a 4-DMN-functionalized primary amine that is compatible with the traditional submonomer peptoid synthesis methods and incorporated it sequence-specifically into 11 of 13 new peptoids. When included as a peptoid side chain modification, the fluorescence emission intensity of 4-DMN correlates with predictions of the fluorophore's local polarity within a putative structure. 4-DMN fluorescence is maximized when the fluorophore is placed in the middle of the hydrophobic face of an amphiphilic helical peptoid. When the fluorophore is placed near the peptoid terminus or on a polar face of an amphiphilic sequence, 4-DMN fluorescence is diminished. Disruption of the peptoid secondary structure or amphiphilicity also modulates 4-DMN fluorescence. The peptoids' helical secondary structures are moderately disrupted by inclusion of a 4-DMN-modified side chain as evaluated by changes in the peptoids' CD spectral features. This new method for peptoid structure evaluation should be a valuable complement to existing peptoid structural analysis tools.

Research into selective biomarkers of erythrocyte exposure to organophosphorus compounds.

Flowcytometric procedures provide distinct advantages over the colorimetric methods currently in use to monitor erythrocytes for exposure of patients to organophosphorus (OP) pesticides and chemical warfare agents; therefore, they warrant exploration. Two types of fluorescent probes-one to detect the total acetylcholinesterase on erythrocytes (RBC-AChE) and the other to distinguish between the active and OP-inhibited RBC-AChE-have been explored. Our studies demonstrate that a fluorescently conjugated fasciculin can be used to monitor total, active, and OP-inhibited RBC-AChE. However, a fluorescently tagged potent inhibitor of AChE, TZ2PIQ-A6 with a K(d) of 33 fM, did not distinguish between the active and OP-inhibited RBC-AChE, nor did three different biotinylated OP compounds. The biotin-fluorescent avidin approach is not a viable procedure for monitoring RBC-AChE. Western blot studies indicate that there are at least 20 serine hydrolases on the surface of red blood cells (RBCs). Plans currently under way for the development of more specific probes to distinguish between active and OP-inhibited RBC-AChE are discussed.

Evaluating beta-turn mimics as beta-sheet folding nucleators.

Beta-turns are common conformations that enable proteins to adopt globular structures, and their formation is often rate limiting for folding. Beta-turn mimics, molecules that replace the i + 1 and i + 2 amino acid residues of a beta-turn, are envisioned to act as folding nucleators by preorganizing the pendant polypeptide chains, thereby lowering the activation barrier for beta-sheet formation. However, the crucial kinetic experiments to demonstrate that beta-turn mimics can act as strong nucleators in the context of a cooperatively folding protein have not been reported. We have incorporated 6 beta-turn mimics simulating varied beta-turn types in place of 2 residues in an engineered beta-turn 1 or beta-bulge turn 1 of the Pin 1 WW domain, a three-stranded beta-sheet protein. We present 2 lines of kinetic evidence that the inclusion of beta-turn mimics alters beta-sheet folding rates, enabling us to classify beta-turn mimics into 3 categories: those that are weak nucleators but permit Pin WW folding, native-like nucleators, and strong nucleators. Strong nucleators accelerate folding relative to WW domains incorporating all alpha-amino acid sequences. A solution NMR structure reveals that the native Pin WW beta-sheet structure is retained upon incorporating a strong E-olefin nucleator. These beta-turn mimics can now be used to interrogate protein folding transition state structures and the 2 kinetic analyses presented can be used to assess the nucleation capacity of other beta-turn mimics.

An experimental survey of the transition between two-state and downhill protein folding scenarios.

A kinetic and thermodynamic survey of 35 WW domain sequences is used in combination with a model to discern the energetic requirements for the transition from two-state folding to downhill folding. The sequences used exhibit a 600-fold range of folding rates at the temperature of maximum folding rate. Very stable proteins can achieve complete downhill folding when the temperature is lowered sufficiently below the melting temperature, and then at even lower temperatures they become two-state folders again because of cold denaturation. Less stable proteins never achieve a sufficient bias to fold downhill because of the onset of cold denaturation. The model, considering both heat and cold denaturation, reveals that to achieve incipient downhill folding (barrier <3 RT) or downhill folding (no barrier), the WW domain average melting temperatures have to be >/=50 degrees C for incipient downhill folding and >/=90 degrees C for downhill folding.

A cross-strand Trp Trp pair stabilizes the hPin1 WW domain at the expense of function.

Using the human Pin1 WW domain (hPin1 WW), we show that replacement of two nearest neighbor non-hydrogen-bonded residues on adjacent beta-strands with tryptophan (Trp) residues increases beta-sheet thermodynamic stability by 4.8 kJ mol(-1) at physiological temperature. One-dimensional NMR studies confirmed that introduction of the Trp-Trp pair does not globally perturb the structure of the triple-stranded beta-sheet, while circular dichroism studies suggest that the engineered cross-strand Trp-Trp pair adopts a side-chain conformation similar to that first reported for a designed "Trp-zipper" beta-hairpin peptide, wherein the indole side chains stack perpendicular to each other. Even though the mutated side chains in wild-type hPin1 WW are not conserved among WW domains and compose the beta-sheet surface opposite to that responsible for ligand binding, introduction of the cross-strand Trp-Trp pair effectively eliminates hPin1 WW function as assessed by the loss of binding affinity toward a natural peptide ligand. Maximizing both thermodynamic stability and the domain function of hPin1 WW by the above mentioned approach appears to be difficult, analogous to the situation with loop 1 optimization explored previously. That introduction of a non-hydrogen-bonded cross-strand Trp-Trp pair within the hPin1 WW domain eliminates function may provide a rationale for why this energetically favorable pairwise interaction has not yet been identified in WW domains or any other biologically evolved protein with known three-dimensional structure.

Succinct synthesis of beta-amino acids via chiral isoxazolines.

beta-Amino acids are important synthetic targets due to their presence in a wide variety of natural products, pharmaceutical agents, and mimics of protein structural motifs. While beta-amino acids containing geminal substitution patterns have enormous potential for application in these contexts, synthetic challenges to the stereoselective preparation of this class of compound have thus far limited more complete studies. We present here a straightforward method employing chiral isoxazolines as key intermediates to access five different beta-amino acid structural types with excellent selectivity. Of particular note is the use of this approach to prepare highly substituted cis-beta-proline analogues. The ready access to these diversely substituted compounds is expected to facilitate future studies of the structure and function of this important class of molecules.

A concise approach to structurally diverse beta-amino acids.

We have demonstrated that the high yields and selectivities of 1,3-dipolar cycloadditions can be translated into facile stereoselective syntheses of a diverse array of beta-amino acids, key components of bioactive natural products, beta-lactams, and peptidomimetics. Simply by selecting different combinations of three readily available starting materials (an oxime, a chiral allylic alcohol, and a nucleophile), we used the reaction sequence to prepare four different beta-amino acid structural types with a variety of substitution patterns in good overall yield. Of particular note is the use of this approach to prepare highly substituted beta-amino acids not readily accessible by previously reported methodologies. This will pave the way for future studies of the structure and function of this important class of molecules.