RESUMO
A deep understanding of the inherent roles of wood polymers such as cellulose, hemicelluloses, and lignin in the hierarchical structure of wood is of key importance for advancing functional wood-based materials but is currently lacking. To address this gap, we clarified the underexplored contributions of wood polymer assemblies to the structural support and compressive properties of wood by chemically removing polysaccharides or lignin from wood blocks of a conifer Cryptomeria japonica. Compositional and structural evaluations revealed that cellulose, hemicelluloses, and lignin contributed to the dimensional stability of wood, especially that the polysaccharide network at cell corners sustained the honeycomb cell structure. Wood polymer assemblies featuring the anatomical structure of wood were also evaluated in terms of compressive properties. The modulus and strength reflected the density and anisotropy, whereas fracture behavior was well characterized by each wood polymer assembly through the classification of stress-strain curves based on principal component analysis. The difference in fracture behaviors indicated that the rigid lignin and flexible cellulose assemblies, possibly mediated by hemicelluloses, complementarily determine the unique compressive response of wood. These findings enable the adjustment of wood functionality and the selection of composite components for wood modification while inspiring the development of novel wood applications.
Assuntos
Lignina , Madeira , Lignina/química , Madeira/química , Polímeros/análise , Polissacarídeos/química , Celulose/químicaRESUMO
In recent years, the importance of biomass utilization has increased, but it has not been effectively exploited. In particular, it is difficult to use hemicellulose, the second most abundant biopolymer of biomass. Therefore, in order to promote the utilization of hemicellulose, we screened for microorganisms capable of producing polysaccharides from D-xylose. The following four strains were selected from samples collected from various regions of Okinawa Prefecture: Kosakonia sp. (SO_001), Papiliotrema terrestris (SO_005), Pseudarthrobacter sp. (SO_006), and Williamsia sp. (SO_009). Observation with a scanning electron microscope (SEM) confirmed that each bacterium produced polysaccharides with different shapes. In addition, the molecular weight and sugar composition of the polysaccharides produced by each bacterium were distinct. The selected microorganisms include closely related species known to promote plant growth and known to suppress postharvest pathogens. Since these microorganisms may be used not only in known fields but also in new fields, the results of this research are expected to greatly expand the uses of hemicellulose.
RESUMO
Wood products function as carbon storage even after being harvested from forests. This has garnered attention in relevance to climate change countermeasures. In the progress of efforts toward climate change mitigation by private companies, the effective use of wood products has been an important measure. However, the methodology for accounting carbon stocks in wood products for private companies has not been established. Therefore, this study investigated methods for estimating carbon stocks in wood products used in wooden houses built by private enterprises, targeting a major company in the Japanese building industry. The results indicated that both the direct inventory method and flux data method (FDM) were applicable for estimating the carbon stocks. These two methods use data that can be obtained from many other building companies, thus, indicating high versatility. The log-normal, Weibull, normal, and logistic distributions, in descending order, proved to be suitable lifetime functions of wooden houses under the FDM, with a half-life of 66-101 years. It is important to continuously acquire time-series data on the floor areas of both newly built and existing houses and the amount of wood products used to improve the accuracy of estimates and explore future predictions.
Assuntos
Ciclo do Carbono , Carbono , Materiais de Construção , Madeira , Mudança Climática , Florestas , Indústria da ConstruçãoRESUMO
The physiological implications of autophagy in plant cells have not been fully elucidated. Therefore, we investigated the consequences of autophagy in the moss Physcomitrella by measuring biochemical parameters (fresh and dry weights; starch, amino acid, carbohydrate, and NH3 content) in wild-type (WT) and autophagy-deficient atg5 Physcomitrella cells. We found higher starch levels and a higher net starch synthesis rate in WT cells than in atg5 cells cultured in a glucose-containing culture medium, whereas net starch degradation was similar in the two strains cultured in a glucose-deficient culture medium. Additionally, the treatment of cells with the autophagy inhibitor 3-methyladenine suppressed starch synthesis. Loading bovine serum albumin into atg5 cells through endocytosis, i.e., supplying proteins to vacuoles in the same way as through autophagy, accelerated starch synthesis, whereas loading glutamine through the plasma membrane had no such effect, suggesting that Physcomitrella cells distinguish between different amino acid supply pathways. After net starch synthesis, NH3 levels increased in WT cells, although the change in total amino acid content did not differ between WT and atg5 cells, indicating that autophagy-produced amino acids are oxidized rapidly. We conclude that autophagy promotes starch synthesis in Physcomitrella by supplying the energy obtained by oxidizing autophagy-produced amino acids.
RESUMO
The secondary tissues of woody plants consist of fragile cells and rigid cell walls. However, the structures are easily damaged during mechanical cross-sectioning for electron microscopy analysis. Broad argon ion beam (BIB) milling is commonly employed for scanning electron microscopy (SEM) of hard materials to generate a large and distortion-free cross-section. However, BIB milling has rarely been used in plant science. In the present study, SEM combined with BIB milling was validated as an accurate tool for structural observation of secondary woody tissues of two samples, living pine (Pinus densiflora) and high-density oak wood (Quercus phillyraeoides), and compared with classical microtome cross-sectioning. The BIB milling method does not require epoxy resin embedding because of prior chemical fixation and critical point drying of the sample, thus producing a three-dimensional image. The results showed that xylem structures were well-preserved in their natural state in the BIB-milled cross-section compared with the microtome cross-section. The observations using SEM combined with BIB milling were useful for wide-area imaging of both hard and soft plant tissues, which are difficult to observe with transmitted electron microscopy because it is difficult to obtain sections of such tissues, particularly those of fragile reaction woods.
Assuntos
Técnicas Histológicas , Madeira , Argônio , Técnicas Histológicas/métodos , Microscopia Eletrônica de Varredura , XilemaRESUMO
MAIN CONCLUSION: Calli derived from young leaves of Aesculus turbinata contained tracheary elements with large pores that resembled perforations of vessel elements. The differentiation of tracheary elements in vitro provides a useful system for detailed analysis of xylem cell differentiation. To examine the mechanism of formation of cell wall structures, new differentiation systems are required that allows us to induce highly organized structures, such as perforations. In this study, we developed such a system in which we were able to induce formation of tracheary elements with perforations, using calli of a hardwood, Aesculus turbinata. Young leaves of A. turbinata were placed on modified MS medium that contained 5 µM 2,4-dichlorophenoxyacetic acid (2,4-D) and 5 µM benzyladenine (BA). Tracheary elements were induced in calli derived from young leaves of A. turbinata. Some tracheary elements formed broad areas of secondary wall with typical features of secondary xylem. Other tracheary elements formed spiral thickenings, which are typical features of vessel elements in secondary xylem of A. turbinata. Approximately 10% of tracheary elements formed large pores that resembled perforations of vessel elements and various types of the perforation plate were observed. Addition of NAA and brassinolide to the induction medium enhanced the differentiation of tracheary elements in calli of A. turbinata. Newly induced tracheary elements also formed typical features of secondary xylem such as perforations of the vessel elements. Our model system might be useful in efforts to understand the mechanisms of formation of highly organized structures in tracheary elements in secondary xylem.
Assuntos
Aesculus , Diferenciação Celular , Parede Celular , Japão , XilemaRESUMO
Temperature is an important factor for the cambial growth in temperate trees. We investigated the way daily temperatures patterns (maximum, average and minimum) from late winter to early spring affected the timing of cambial reactivation and xylem differentiation in stems of the conifer Chamaecyparis pisifera. When the daily temperatures started to increase earlier from late winter to early spring, cambial reactivation occurred earlier. Cambium became active when it achieves the desired accumulated temperature above the threshold (cambial reactivation index; CRI) of 13 °C in 11 days in 2013 whereas 18 days in 2014. This difference in duration required for achieving accumulated temperature can be explained with the variations in the daily temperature patterns in 2013 and 2014. Our formula for calculation of CRI predicted the cambial reactivation in 2015. A hypothetical increase of 1-4 °C to the actual daily maximum temperatures of 2013 and 2014 shifted the timing of cambial reactivation and had different effects on cambial reactivation in the two consecutive years because of variations in the actual daily temperatures patterns. Thus, the specific annual pattern of accumulation of temperature from late winter to early spring is a critical factor in determining the timing of cambial reactivation in trees.
Assuntos
Chamaecyparis/fisiologia , Caules de Planta/fisiologia , Estações do Ano , TemperaturaRESUMO
Investigating plant structure is fundamental in botanical science and provides crucial knowledge for the theories of plant evolution, ecophysiology and for the biotechnological practices. Modern plant anatomy often targets the formation, localization and characterization of cellulosic, lignified or suberized cell walls. While classical methods developed in the 1960s are still popular, recent innovations in tissue preparation, fluorescence staining and microscopy equipment offer advantages to the traditional practices for investigation of the complex lignocellulosic walls. Our goal is to enhance the productivity and quality of microscopy work by focusing on quick and cost-effective preparation of thick sections or plant specimen surfaces and efficient use of direct fluorescent stains. We discuss popular histochemical microscopy techniques for visualization of cell walls, such as autofluorescence or staining with calcofluor, Congo red (CR), fluorol yellow (FY) and safranin, and provide detailed descriptions of our own approaches and protocols. Autofluorescence of lignin in combination with CR and FY staining can clearly differentiate between lignified, suberized and unlignified cell walls in root and stem tissues. Glycerol can serve as an effective clearing medium as well as the carrier of FY for staining of suberin and lipids allowing for observation of thick histological preparations. Three-dimensional (3D) imaging of all cell types together with chemical information by wide-field fluorescence or confocal laser scanning microscopy (CLSM) was achieved.
RESUMO
MAIN CONCLUSION: An artificial lignified cell wall was synthesized in three steps: (1) isolation of microfibrillar network; (2) localization of peroxidase through immunoreaction; and (3) polymerization of DHP to lignify the cell wall. Artificial woody cell wall synthesis was performed following the three steps along with the actual formation in nature using cellulose microfibrils extracted from callus derived from Cryptomeria japonica. First, we constructed a polysaccharide network on a transmission electron microscopy (TEM) grid. The preparation method was optimized by chemical treatment, followed by mechanical fibrillation to create a microfibrillated network. Morphology was examined by TEM, and chemical characterization was by Fourier transform infrared (FTIR) spectroscopy. Second, we optimized the process to place peroxidase on the microfibrils via an immunoreaction technique. Using a xyloglucan antibody, we could ensure that gold particles attached to the secondary antibodies were widely and uniformly localized along with the microfibril network. Third, we applied the peroxidase attached to secondary antibodies and started to polymerize the lignin on the grid by simultaneously adding coniferyl alcohol and hydrogen peroxide. After 30 min of artificial lignification, TEM observation showed that lignin-like substances were deposited on the polysaccharide network. In addition, FTIR spectra revealed that the bands specific for lignin had increased, demonstrating the successful artificial formation of woody cell walls. This approach may be useful for studying woody cell wall formation and for producing made-to-order biomaterials.
Assuntos
Parede Celular/ultraestrutura , Celulose/metabolismo , Cryptomeria/química , Lignina/metabolismo , Microfibrilas/metabolismo , Peroxidase/metabolismo , Catálise , Parede Celular/química , Células Cultivadas , Celulose/ultraestrutura , Cryptomeria/enzimologia , Peróxido de Hidrogênio/metabolismo , Microfibrilas/ultraestrutura , Microscopia Eletrônica de Transmissão , Proteínas de Plantas/metabolismo , Polissacarídeos/metabolismo , Espectroscopia de Infravermelho com Transformada de Fourier , MadeiraRESUMO
Although coffee beans have been widely studied, application of coffee flower (CF) has not been previously investigated. Here, we evaluated the use of CF for the production of bioactive compounds, melanoidins, and bio-sugars through the green process. Pressurized hot water extraction was found to be the most appropriate method for extracting bioactive compounds from CF, which contain high values of total phenolic content and have antioxidant properties. Caffeine and trigonelline were the main compounds in CF with yields of 1070.8â¯mg and 1092.8â¯mg/100â¯g dry weight (DW), respectively. Melanoidins were also identified and quantified in the CF extracts that is approximately 30.2% were efficiently recovered in the initial extracts of CF. Bio-sugar was also obtained from cellulase and pectinase at a 92.8% conversion rate. The aim of this study is to promote a novel approach using high amounts of CFs in the production of functional healthy foods and beverages.
Assuntos
Coffea/química , Flores/química , Compostos Fitoquímicos/metabolismo , Polímeros/metabolismo , Açúcares/metabolismo , Alcaloides/análise , Antioxidantes/análise , Cafeína/análise , Carboidratos/análise , Fenóis/análiseRESUMO
PREMISE: Cambial activity in some tropical trees varies intra-annually, with the formation of xylem rings. Identification of the climatic factors that regulate cambial activity is important for understanding the growth of such species. We analyzed the relationship between climatic factors and cambial activity in four tropical hardwoods, Acacia mangium, Tectona grandis, Eucalyptus urophylla, and Neolamarckia cadamba in Yogyakarta, Java Island, Indonesia, which has a rainy season (November-June) and a dry season (July-October). METHODS: Small blocks containing phloem, cambium, and xylem were collected from main stems in January 2014, October 2015 and October 2016, and examined with light microscopy for cambial cell division, fusiform cambial cells, and expanding xylem cells as evidence of cambial activity. RESULTS: During the rainy season, when precipitation was high, cambium was active. By contrast, during the dry season in 2015, when there was no precipitation, cambium was dormant. However, in October 2016, during the so-called dry season, cambium was active, cell division was conspicuous, and a new xylem ring formation was initiated. The difference in cambial activity appeared to be related to an unusual pattern of precipitation during the typically dry months, from July to October, in 2016. CONCLUSIONS: Our results indicate that low or absent precipitation for 3 to 4 months induces cessation of cambial activity and temporal periodicity of wood formation in the four species studied. By contrast, in the event of continuing precipitation, cambial activity in the same trees may continue throughout the year. The frequency pattern of precipitation appears to be an important determinant of wood formation in tropical trees.
Assuntos
Câmbio/anatomia & histologia , Câmbio/fisiologia , Chuva , Árvores/anatomia & histologia , Árvores/fisiologia , Acacia/anatomia & histologia , Acacia/crescimento & desenvolvimento , Acacia/fisiologia , Câmbio/crescimento & desenvolvimento , Divisão Celular , Eucalyptus/anatomia & histologia , Eucalyptus/crescimento & desenvolvimento , Eucalyptus/fisiologia , Agricultura Florestal , Indonésia , Lamiaceae/anatomia & histologia , Lamiaceae/crescimento & desenvolvimento , Lamiaceae/fisiologia , Rubiaceae/anatomia & histologia , Rubiaceae/crescimento & desenvolvimento , Rubiaceae/fisiologia , Estações do Ano , Especificidade da Espécie , Árvores/crescimento & desenvolvimentoRESUMO
Leaf photosynthetic and post-photosynthetic processes modulate the isotope ratios of tree-ring cellulose. Post-photosynthetic processes, such as the remobilization of stored starch in early spring, are important to understanding the mechanisms of xylem formation in tree stems; however, untangling the isotope ratio signals of photosynthetic and post-photosynthetic processes imprinted on tree rings is difficult. Portions of carbon-bound hydrogen and oxygen atoms are exchanged with medium water during post-photosynthetic processes. We investigated the δD and δ18O values of tree-ring cellulose using Quercus crispula Blume trees in two different habitats to evaluate seasonal changes in the exchange rate (f-value) of hydrogen or oxygen with medium water, and examined the associations of the post-photosynthetic processes. Theoretically, if the f-value is constant, δD and δ18O would be positively correlated due to meteorological factors, while variation in the f-value will create a discrepancy and weak correlation between δD and δ18O due to the exchange of carbon-bound hydrogen and oxygen with medium water. The values of δD decreased drastically from earlywood to latewood, while those of δ18O increased to a peak and then decreased toward the latewood. The estimated seasonal f-value was high at the beginning of earlywood and decreased toward the latewood. The post-photosynthetic processes associated with changes in the f-value were the remobilization of stored starch and triose cycling during cellulose synthesis because of the shortage of photo-assimilates in early spring. Although we did not evaluate relevant physiological parameters, the seasonal pattern of δD and δ18O in tree-ring cellulose of Q. crispula was clear, suggesting that the dual isotope (δD and δ18O) approach can be used to reveal the resource allocation mechanisms underlying seasonal xylem formation.
Assuntos
Celulose/metabolismo , Fotossíntese , Quercus/crescimento & desenvolvimento , Estações do Ano , Celulose/química , Florestas , Isótopos , Japão , Quercus/metabolismoRESUMO
Background and Aims: In response to a gravitational stimulus, angiosperm trees generally form tension wood on the upper sides of leaning stems in order to reorientate the stems in the vertical direction. It is unclear whether the angle of inclination from the vertical affects tension wood formation. This study was designed to investigate negative gravitropism, tension wood formation and growth eccentricity in Acacia mangium seedlings inclined at different angles. Methods: Uniform seedlings of A. mangium were artificially inclined at 30°, 45°, 60° and 90° from the vertical and harvested, with non-inclined controls, 3 months later. We analysed the effects of the angle of inclination on the stem recovery angle, the anatomical features of tension wood and radial growth. Key Results: Smaller inclination angles were associated with earlier stem recovery while stems subjected to greater inclination returned to the vertical direction after a longer delay. However, in terms of the speed of negative gravitopism towards the vertical, stems subjected to greater inclination moved more rapidly toward the vertical. There was no significant difference in terms of growth eccentricity among seedlings inclined at different angles. The 30°-inclined seedlings formed the narrowest region of tension wood but there were no significant differences among seedlings inclined at 45°, 60° and 90°. The 90°-inclined seedlings formed thicker gelatinous layers than those in 30°-, 45°- and 60°-inclined seedlings. Conclusion: Our results suggest that the angle of inclination of the stem influences negative gravitropism, the width of the tension wood region and the thickness of gelatinous layers. Larger amounts of gelatinous fibres and thicker gelatinous layers might generate the higher tensile stress required for the higher speed of stem-recovery movement in A. mangium seedlings.
Assuntos
Acacia/fisiologia , Gravitropismo , Acacia/anatomia & histologia , Acacia/crescimento & desenvolvimento , Gravitação , Plântula/anatomia & histologia , Plântula/crescimento & desenvolvimento , Plântula/fisiologia , Madeira/anatomia & histologia , Madeira/crescimento & desenvolvimento , Madeira/fisiologiaRESUMO
All fine root systems consist of individual fine roots. Individual roots have morphological, anatomical, and functional heterogeneity (heterorhizy). Heterorhizy plays crucial roles in plant ecosystems. However, in many species, the heterorhizy and fine root system architecture based on individual root units are unclear. This study investigated heterorhizy along the root system architecture of Vaccinium virgatum Ait (rabbiteye blueberry) softwood-cuttings (propagated from annual shoots in growing season) using protoxylem groups (PGs), a classification according to the number of protoxylem poles, as an indicator of individual root traits. Individual roots of rabbiteye blueberry varied from monarch to heptarch. The frequency of roots with larger number of PGs decreased but those with smaller number of PGs increased from adventitious roots toward lateral roots with different branching levels. This architecture were stable among cultivars, collecting position of the cuttings, or indole acetic acids treatment. Individual root sizes and secondary growth were positively correlated with the PGs. These results indicate that branching itself strongly and broadly controls individual root traits. The individual roots were classified into two types: monarch and diarch roots with small size and lacking secondary growth (thought to be hair roots in core Ericaceae) and triarch or more PG roots with large size and showing secondary growth. These heterogeneous individual roots responded differently to the experimental factors. In particular, elongation of the large roots significantly contributed to increased total root length. These results mean that heterorhizic plasticity is a determinant of root system development and heterorhizic variation exists even under practical cutting condition. In conclusion, we demonstrated heterorhizy of rabbieye blueberry cuttings based on the strong relationships of PG, individual root morphology and growth potential, and root system architecture. This study also supports strong connection between root morphology and functional roles intermediated by the PG.
Assuntos
Mirtilos Azuis (Planta)/anatomia & histologia , Raízes de Plantas/anatomia & histologia , Mirtilos Azuis (Planta)/crescimento & desenvolvimento , Raízes de Plantas/crescimento & desenvolvimento , Xilema/classificaçãoRESUMO
Elucidation of the mechanism of adsorption of particles suspended in the gas-phase (aerosol) to the outer surfaces of leaves provides useful information for understanding the mechanisms of the effect of aerosol particles on the growth and physiological functions of trees. In the present study, we examined the localization of artificially deposited sub-micron-sized carbon-based particles on the surfaces of needles of Cryptomeria japonica, a typical Japanese coniferous tree species, by field-emission scanning electron microscopy. The clusters (aggregates) of carbon-based particles were deposited on the needle surface regions where epicuticular wax crystals were sparsely distributed. By contrast, no clusters of the particles were found on the needle surface regions with dense distribution of epicuticular wax crystals. Number of clusters of carbon-based particles per unit area showed statistically significant differences between regions with sparse epicuticular wax crystals and those with dense epicuticular wax crystals. These results suggest that epicuticular wax crystals affect distribution of carbon-based particles on needles. Therefore, densely distributed epicuticular wax crystals might prevent the deposition of sub-micron-sized carbon-based particles on the surfaces of needles of Cryptomeria japonica to retain the function of stomata.
Assuntos
Aerossóis/farmacologia , Carbono/farmacologia , Cryptomeria/química , Epiderme Vegetal/química , Folhas de Planta/química , Ceras/química , Cryptomeria/efeitos dos fármacos , Cristalização , Tamanho da Partícula , Epiderme Vegetal/efeitos dos fármacos , Folhas de Planta/efeitos dos fármacos , Folhas de Planta/ultraestruturaRESUMO
MAIN CONCLUSION: The work demonstrates a relationship between the biosynthesis of the secondary metabolite, agatharesinol, and cytological changes that occur in ray parenchyma during cell death in sapwood sticks of Cryptomeria japonica under humidity-regulated conditions. To characterize the death of ray parenchyma cells that accompanies the biosynthesis of secondary metabolites, we examined cell death in sapwood sticks of Cryptomeria japonica under humidity-regulated conditions. We monitored features of ray parenchyma cells, such as viability, the morphology of nuclei and vacuoles, and the amount of starch grains. In addition, we analyzed levels of agatharesinol, a heartwood norlignan, by gas chromatography-mass spectrometry in the same sapwood sticks. Dramatic changes in the amount of starch grains and in the level of agatharesinol occurred simultaneously. Therefore, the biosynthesis of agatharesinol appeared to originate from the breakdown of starch. Furthermore, we observed the expansion of vacuoles in ray parenchyma cells prior to other cytological changes at the final stage of cell death. In our experimental system, we were able to follow the process of cell death and to demonstrate relationships between cytological changes and the biosynthesis of a secondary metabolite during the death of ray parenchyma cells.
Assuntos
Cryptomeria/citologia , Cryptomeria/metabolismo , Lignanas/metabolismo , Morte Celular , Cromatografia Gasosa-Espectrometria de Massas , Microscopia Eletrônica de Transmissão , Células Vegetais/metabolismo , Células Vegetais/ultraestrutura , Metabolismo Secundário , Amido/metabolismo , Madeira/citologia , Madeira/metabolismoRESUMO
BACKGROUND AND AIMS: When the orientation of the stems of conifers departs from the vertical as a result of environmental influences, conifers form compression wood that results in restoration of verticality. It is well known that intercellular spaces are formed between tracheids in compression wood, but the function of these spaces remains to be clarified. In the present study, we evaluated the impact of these spaces in artificially induced compression wood in Chamaecyparis obtusa seedlings. METHODS: We monitored the presence or absence of liquid in the intercellular spaces of differentiating xylem by cryo-scanning electron microscopy. In addition, we analysed the relationship between intercellular spaces and the hydraulic properties of the compression wood. KEY RESULTS: Initially, we detected small intercellular spaces with liquid in regions in which the profiles of tracheids were not rounded in transverse surfaces, indicating that the intercellular spaces had originally contained no gases. In the regions where tracheids had formed secondary walls, we found that some intercellular spaces had lost their liquid. Cavitation of intercellular spaces would affect hydraulic conductivity as a consequence of the induction of cavitation in neighbouring tracheids. CONCLUSIONS: Our observations suggest that cavitation of intercellular spaces is the critical event that affects not only the functions of intercellular spaces but also the hydraulic properties of compression wood.
Assuntos
Chamaecyparis/fisiologia , Espaço Extracelular/metabolismo , Plântula/fisiologia , Água/metabolismo , Madeira/fisiologia , Microscopia de Fluorescência , Plântula/ultraestrutura , Madeira/ultraestruturaRESUMO
BACKGROUND AND AIMS: In temperate regions, trees undergo annual cycles of cambial growth, with periods of cambial activity and dormancy. Environmental factors might regulate the cambial growth, as well as the development of cambial derivatives. We investigated the effects of low temperature by localized cooling on cambial activity and latewood formation in two conifers, Chamaecyparis obtusa and Cryptomeria japonica. METHODS: A plastic rubber tube that contained cooled water was wrapped around a 30-cm-wide portion of the main stem of Chamaecyparis obtusa and Cryptomeria japonica trees during seasons of active cambium. Small blocks were collected from both cooled and non-cooled control portions of the stems for sequential observations of cambial activity and for anatomical measurements of cell morphology by light microscopy and image analysis. KEY RESULTS: The effect of localized cooling was first observed on differentiating tracheids. Tracheids narrow in diameter and with significantly decreased cambial activity were evident 5 weeks after the start of cooling in these stems. Eight weeks after the start of cooling, tracheids with clearly diminished diameters and thickened cell walls were observed in these stems. Thus, localized low temperature induced narrow diameters and obvious thickening of secondary cell walls of tracheids, which were identified as latewood tracheids. Two months after the cessation of cooling, a false annual ring was observed and cambium became active again and produced new tracheids. In Cryptomeria japonica, cambial activity ceased earlier in locally cooled portions of stems than in non-cooled stems, indicating that the cambium had entered dormancy sooner in the cooled stems. CONCLUSIONS: Artificial cooling of stems induced latewood formation and cessation of cambial activity, indicating that cambium and its derivatives can respond directly to changes in temperature. A decrease in the temperature of the stem is a critical factor in the control of cambial activity and xylem differentiation in trees.
Assuntos
Câmbio/fisiologia , Temperatura Baixa , Caules de Planta/fisiologia , Estações do Ano , Traqueófitas/fisiologia , Madeira/fisiologia , Ar , Chamaecyparis/fisiologia , Cryptomeria/fisiologiaRESUMO
Gibberellins (GAs) are important regulators of plant shoot biomass growth, and GA 20-oxidase (GA20ox) is one of the major regulatory enzymes in the GA biosynthetic pathway. Previously, we showed that the expression levels of a putative GA20ox1 (i.e., PdGA20ox1) in stem tissue of 3-month-old seedlings of 12 families of Pinus densiflora were positively correlated with stem diameter growth across those same families growing in an even-aged 32-year-old pine forest (Park EJ, Lee WY, Kurepin LV, Zhang R, Janzen L, Pharis RP (2015) Plant hormone-assisted early family selection in Pinus densiflora via a retrospective approach. Tree Physiol 35:86-94). To further investigate the molecular function of this gene in the stem wood growth of forest trees, we produced transgenic poplar lines expressing PdGA20ox1 under the control of the 35S promoter (designated as 35S::PdGA20ox1). By age 3 months, most of the 35S::PdGA20ox1 poplar trees were showing an exceptional enhancement of stem wood growth, i.e., up to fourfold increases in stem dry weight, compared with the nontransformed control poplar plants. Significant increases in endogenous GA1, its immediate precursor (GA20) and its catabolite (GA8) in elongating internode tissue accompanied the increased stem growth in the transgenic lines. Additionally, the development of gelatinous fibers occurred in vertically grown stems of the 35S::PdGA20ox1 poplars. An analysis of the cell wall monosaccharide composition of the 35S::PdGA20ox1 poplars showed significant increases in xylose and glucose contents, indicating a qualitative increase in secondary wall depositions. Microarray analyses led us to find a total of 276 probe sets that were upregulated (using threefold as a threshold) in the stem tissues of 35S::PdGA20ox1 poplars relative to the controls. 'Cell organization or biogenesis'- and 'cell wall'-related genes were overrepresented, including many of genes that are involved in cell wall modification. Several transcriptional regulators, which positively regulate cell elongation through GA signaling, were also upregulated. In contrast, genes involved in defense signaling were appreciably downregulated in the 35S::PdGA20ox1 stem tissues, suggesting a growth versus defense trade-off. Taken together, our results suggest that PdGA20ox1 functions to promote stem growth and wood formation in poplar, probably by activating GA signaling while coincidentally depressing defense signaling.
Assuntos
Regulação Enzimológica da Expressão Gênica/fisiologia , Regulação da Expressão Gênica de Plantas/fisiologia , Oxigenases de Função Mista/metabolismo , Pinus/enzimologia , Populus/metabolismo , Madeira/crescimento & desenvolvimento , Ácido Abscísico/biossíntese , Biomassa , Giberelinas/metabolismo , Ácidos Indolacéticos/metabolismo , Oxigenases de Função Mista/genética , Pinus/crescimento & desenvolvimento , Pinus/metabolismo , Plantas Geneticamente Modificadas/genética , Plantas Geneticamente Modificadas/metabolismo , Populus/enzimologia , Populus/genética , Análise Serial de Proteínas , RNA de Plantas/genética , RNA de Plantas/metabolismo , Transdução de SinaisRESUMO
To assess the effects of O(3)on growth, net photosynthesis and yield of two African varieties of cowpea(Vigna unguiculata L.), Blackeye and Asontem were exposed as potted plants to air that was either filtered to remove O(3) (FA), non-filtered air (NF), non-filtered with added O3 of approximately 50 nL L(-1) (ppb) from 11:00 to 16:00 (NF + O(3)) for 88 days in open-top chambers. The mean O(3) concentration (11:00-16:00) during the exposure period had a range from 16 ppb in the FA treatment to 118 ppb in the NF + O(3) treatment. Net photosynthetic rate and leaf area per plant were significantly reduced by exposure to O(3), reducing the growth of both varieties. Exposure to O(3) significantly reduced the 100-seed weight and number of seeds per pod. As a result, cowpea yield was significantly reduced by long-term exposure to O(3), with no difference in sensitivity between the varieties.