Optical pumping of quantum dot micropillar lasers.

Arrays of quantum dot micropillar lasers are an attractive technology platform for various applications in the wider field of nanophotonics. Of particular interest is the potential efficiency enhancement as a consequence of cavity quantum electrodynamics effects, which makes them prime candidates for next generation photonic neurons in neural network hardware. However, particularly for optical pumping, their power-conversion efficiency can be very low. Here we perform an in-depth experimental analysis of quantum dot microlasers and investigate their input-output relationship over a wide range of optical pumping conditions. We find that the current energy efficiency limitation is caused by disadvantageous optical pumping concepts and by a low exciton conversion efficiency. Our results indicate that for non-resonant pumping into the GaAs matrix (wetting layer), 3.4% (0.6%) of the optical pump is converted into lasing-relevant excitons, and of those only 2% (0.75%) provide gain to the lasing transition. Based on our findings, we propose to improve the pumping efficiency by orders of magnitude by increasing the aluminium content of the AlGaAs/GaAs mirror pairs in the upper Bragg reflector.

Detection of group B Streptococcus during antenatal screening in Western Australia: a comparison of culture and molecular methods.

AIM: Global screening strategies for Group B Streptococcus (GBS) include risk- or culture-based methods to guide intrapartum prophylaxis. In Western Australia (WA), antenatal culture-based screening is routine; however, numerous culture methods exist, in addition to molecular methods. We aimed to assess the comparability of research and diagnostic screening approaches. METHODS AND RESULTS: Vaginal and rectal swabs were self-collected by pregnant women (n = 531) from King Edward Memorial Hospital, WA, in parallel to routine screening (35-37 weeks of gestation). Research methods involved culture (Strep B Carrot Broth™ and StrepB CHROMagar™) and molecular methods (real-time PCR) and were compared to routine diagnostic screening (Lim Broth and Granada agar). Overall, GBS detection was comparable between research and diagnostic approaches (3-5% discrepancy, kappa = 0·76). Specificity/sensitivity of Carrot Broth™ was 100%/89%, while that of CHROMagar™ was 73%/100%, respectively. Direct PCR was unable to detect GBS in ~18% of specimens which were culture positive; however, it exhibited 100% specificity. CONCLUSIONS: This clinical evaluation of GBS screening methods provides support for current practice. SIGNIFICANCE AND IMPACT OF THE STUDY: Although CHROM was highly sensitive, further testing is recommended due to a high false-positive rate. Molecular assays are useful for rapid detection; however, low-titre samples may require additional enrichment prior to molecular analysis to improve sensitivity.

Single-shot ultrafast laser processing of high-aspect-ratio nanochannels using elliptical Bessel beams.

Ultrafast lasers have revolutionized material processing, opening a wealth of new applications in many areas of science. A recent technology that allows the cleaving of transparent materials via non-ablative processes is based on focusing and translating a high-intensity laser beam within a material to induce a well-defined internal stress plane. This then enables material separation without debris generation. Here, we use a non-diffracting beam engineered to have a transverse elliptical spatial profile to generate high-aspect-ratio elliptical channels in glass of a dimension 350 nm×710 nm and subsequent cleaved surface uniformity at the sub-micron level.

One-step simultaneous detection of Ureaplasma parvum and genotypes SV1, SV3 and SV6 from clinical samples using PlexPCR technology.

Ureaplasma spp. are associated with preterm birth. In recent times, it has become apparent that Ureaplasma parvum, but not Ureaplasma urealyticum, is of most relevance. We recently demonstrated this in Australian pregnant women and using high-resolution melt (HRM) PCR, further showed that U. parvum genotype SV6 was of particular significance. However, our assay was unable to identify multiple genotypes in the same sample, required a separate species-level qPCR for low titre samples and was not ideal for diagnostic laboratories due to the nature of HRM PCR result interpretation. Consequently, our current study developed a novel, one-step PlexPCR assay capable of detecting U. parvum and genotypes SV1, SV3 and SV6 in a single reaction directly from clinical samples. We then validated this using vaginal swab DNA from our Australian cohort of pregnant women. The PlexPCR was highly sensitive, detecting all targets to between 0.4 × 10-5  ng DNA (SV3) and 0.4 × 10-6  ng DNA (U. parvum, SV1 and SV6). Compared to our HRM PCR, the PlexPCR defined genotype distribution in all seven cases previously reported as 'mixed', and detected another eight cases where multiple genotypes (two) were present in samples previously reported as single genotypes using HRM PCR. SIGNIFICANCE AND IMPACT OF THE STUDY: Ureaplasma spp. have been associated with prematurity for decades, however, only a minority of studies have examined this beyond the genus level. In those that have, Ureaplasma parvum has been strongly associated with preterm birth. We recently demonstrated this in Australian women and further showed that U. parvum genotype SV6 was of particular significance. Our PlexPCR assay allows rapid detection and concurrent genotyping of U. parvum in clinical samples and may be of particular interest to obstetricians, particularly those caring for women at a high risk of preterm birth, and any other disease phenotypes where U. parvum is of interest.

High speed cleaving of crystals with ultrafast Bessel beams.

We develop a novel concept for ultra-high speed cleaving of crystalline materials with femtosecond lasers. Using Bessel beams in single shot, fracture planes can be induced nearly all along the Bessel zone in sapphire. For the first time, we show that only for a pulse duration below 650 fs, a single fracture can be induced in sapphire, while above this duration, cracks appear in all crystallographic orientations. We determine the influential parameters which are polarization direction, crystallographic axes and scanning direction. This is applied to cleave sapphire with a spacing as high as 25 µm between laser impacts.

High aspect ratio micro-explosions in the bulk of sapphire generated by femtosecond Bessel beams.

Femtosecond pulses provide an extreme degree of confinement of light matter-interactions in high-bandgap materials because of the nonlinear nature of ionization. It was recognized very early on that a highly focused single pulse of only nanojoule energy could generate spherical voids in fused silica and sapphire crystal as the nanometric scale plasma generated has energy sufficient to compress the material around it and to generate new material phases. But the volumes of the nanometric void and of the compressed material are extremely small. Here we use single femtosecond pulses shaped into high-angle Bessel beams at microjoule energy, allowing for the creation of very high 100:1 aspect ratio voids in sapphire crystal, which is one of the hardest materials, twice as dense as glass. The void volume is 2 orders of magnitude higher than those created with Gaussian beams. Femtosecond and picosecond illumination regimes yield qualitatively different damage morphologies. These results open novel perspectives for laser processing and new materials synthesis by laser-induced compression.

Arbitrary nonparaxial accelerating periodic beams and spherical shaping of light.

We report the observation of arbitrary accelerating beams (ABs) designed using a nonparaxial description of optical caustics. We use a spatial light modulator-based setup and techniques of Fourier optics to generate circular and Weber beams subtending over 95 deg of arc. Applying a complementary binary mask also allows the generation of periodic ABs taking the forms of snake-like trajectories, and the application of a rotation to the caustic allows the first experimental synthesis of optical ABs upon the surface of a sphere in three dimensions.

Sending femtosecond pulses in circles: highly nonparaxial accelerating beams.

We use caustic beam shaping on 100 fs pulses to experimentally generate nonparaxial accelerating beams along a 60° circular arc, moving laterally by 14 µm over a 28 µm propagation length. This is the highest degree of transverse acceleration reported to our knowledge. Using diffraction integral theory and numerical beam propagation simulations, we show that circular acceleration trajectories represent a unique class of nonparaxial diffraction-free beam profile which also preserves the femtosecond temporal structure in the vicinity of the caustic.

Arbitrary accelerating micron-scale caustic beams in two and three dimensions.

We generate arbitrary convex accelerating beams by direct application of an appropriate spatial phase profile on an incident Gaussian beam. The spatial phase calculation exploits the geometrical properties of optical caustics and the Legendre transform. Using this technique, accelerating sheet caustic beams with parabolic profiles (i.e. Airy beams), as well as quartic and logarithmic profiles are experimentally synthesized from an incident Gaussian beam, and we show compatibility with material processing applications using an imaging system to reduce the main intensity lobe at the caustic to sub-10 micron transverse dimension. By applying additional and rotational spatial phase, we generate caustic-bounded sheet and volume beams, which both show evidence of the recently predicted effect of abrupt autofocussing. In addition, an engineered accelerating profile with femtosecond pulses is applied to generate a curved zone of refractive index modification in glass. These latter results provide proof of principle demonstration of how this technique may yield new degrees of freedom in both nonlinear optics and femtosecond micromachining.

High aspect ratio taper-free microchannel fabrication using femtosecond Bessel beams.

We present a systematic study of femtosecond laser microchannel machining in glass using nondiffracting Bessel beams. In particular, our results identify a source and focusing parameter working window where high aspect ratio taper-free microchannels can be reproducibly produced without sample translation. With appropriate source parameters, we machine channels of 2 microm diameter and with aspect ratios up to 40. We propose the filamentation stability of the Bessel beam propagation as the critical factor underlying the controlled and reproducible results that have been obtained.

Surface nanoprocessing with nondiffracting femtosecond Bessel beams.

We demonstrate the application of nondiffracting Bessel beams for reproducible nanometric-scale feature patterning in glass. A femtosecond pulse zero-order Bessel beam with a central spot radius of 360 nm was used to write 500 nm radius nanocraters over a longitudinal positioning range exceeding 20 microm, with a variation in radius of less than 10%. The use of Bessel beams significantly reduces constraints on critical sample positioning in the nanoscale writing regime, enabling the use of femtosecond pulses for fast inscription of nanometer-scale features over large sample areas.

Spectroscopic OCT by grating-based temporal correlation coupled to optical spectral analysis.

Spectroscopic optical coherence tomography (spectroscopic OCT) is an echographic-like optical method for biomedical functional imaging. Current spectroscopic optical coherence tomography (OCT) methods rely on a posteriori numerical calculation. We present an alternative for optically accessing the spectroscopic information in OCT, that is, without postprocessing, by using a grating-based correlation and a wavelength demultiplexing system. Spectrally resolved A-scan is directly recorded on the image sensor. Due to the grating-based system, no correlation scan is necessary. The signal is registered in the wavelength-depth plane on a 2D camera that provides a large number of resolved points. In the frame of this paper, we present the principle of the system as well as demonstration results. Advantages and drawback of this system compared to others are discussed.