RESUMO
The Sarajevo Canton Winter Field Campaign 2018 (SAFICA) was a project that took place in winter 2017-2018 with an aim to characterize the chemical composition of aerosol in the Sarajevo Canton, Bosnia and Herzegovina (BiH), which has one of the worst air qualities in Europe. This paper presents the first characterization of the metals in PM10 (particulate matter aerodynamic diameters ≤10 µm) from continuous filter samples collected during an extended two-months winter period at the urban background Sarajevo and remote Ivan Sedlo sites. We report the results of 18 metals detected by inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ETAAS). The average mass concentrations of metals were higher at the Sarajevo site than at Ivan Sedlo and ranged from 0.050 ng/m3 (Co) to 188 ng/m3 (Fe) and from 0.021 ng/m3 (Co) to 61.8 ng/m3 (Fe), respectively. The BenMAP-CE model was used for estimating the annual BiH health (50% decrease in PM2.5 would save 4760+ lives) and economic benefits (costs of $2.29B) of improving the air quality. Additionally, the integrated energy and health assessment with the ExternE model provided an initial estimate of the additional health cost of BiH's energy system.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Poluentes Atmosféricos/análise , Poluição do Ar/análise , Bósnia e Herzegóvina , Poeira/análise , Monitoramento Ambiental/métodos , Metais/análise , Material Particulado/análise , Estações do AnoRESUMO
Characteristics and sources of ambient particle elements in urban Beijing were studied by hourly observations in two size fractions (PM10 and PM2.5) during November and December 2017 using an online multi-element analyzer. The reconstructed oxide concentrations of 24 elements (from Al to Pb) comprise an appreciable fraction of PM10 and PM2.5, accounting for 37% and 17%, respectively on average. We demonstrate the benefit of using high-time-resolution chemical speciation data in achieving robust source apportionment of the total elemental PM10 (PM10el) and elemental PM2.5 (PM2.5el) mass using positive matrix factorization (PMF). Biomass burning, coal combustion, secondary sulfate, industry, non-exhaust traffic and dust were identified in both size fractions (with varying relative concentrations), which accounted on average for 4%, 12%, 5%, 2%, 14%, and 63%, respectively to the total PM10el, and 14%, 35%, 21%, 6%, 12% and 12%, respectively to the total PM2.5el. Biomass burning and coal combustion exhibited higher concentrations during haze episodes of the heating season. In contrast, secondary sulfate and industry contributed more to haze episodes during the non-heating season. The fractional contribution of dust was mostly high during clean days, while the fractional non-exhaust traffic emission contribution was similar throughout the measurement period. The non-exhaust traffic emissions contributed locally, while the remaining sources were dominated by neighboring areas. Furthermore, trajectory analysis showed that the origin of the industrial sources roughly agreed with the locations of the main point sources. Overall, this work provides detailed information on the characteristics of the elements during different haze events during heating and non-heating seasons.
Assuntos
Poluentes Atmosféricos , Material Particulado , Poluentes Atmosféricos/análise , Pequim , Monitoramento Ambiental , Material Particulado/análise , Estações do Ano , Emissões de Veículos/análiseRESUMO
Delhi, the capital of India, suffers from heavy local emissions as well as regional transport of air pollutants, resulting in severe aerosol loadings. To determine the sources of these pollutants, we have quantified the mass concentrations of 26 elements in airborne particles, measured by an online X-ray fluorescence spectrometer with time resolution between 30 min and 1 h. Measurements of PM10 and PM2.5 (particulate matter <10 µm and < 2.5 µm) were conducted during two consecutive winters (2018 and 2019) in Delhi. On average, 26 elements from Al to Pb made up ~25% and ~19% of the total PM10 mass (271 µg m-3 and 300 µg m-3) in 2018 and 2019, respectively. Nine different aerosol sources were identified during both winters using positive matrix factorization (PMF), including dust, non-exhaust, an S-rich factor, two solid fuel combustion (SFC) factors and four industrial/combustion factors related to plume events (Cr-Ni-Mn, Cu-Cd-Pb, Pb-Sn-Se and Cl-Br-Se). All factors were resolved in both size ranges (but varying relative concentrations), comprising the following contributions to the elemental PM10 mass (in % average for 2018 and 2019): Cl-Br-Se (41.5%, 36.9%), dust (27.6%, 28.7%), non-exhaust (16.2%, 13.7%), S-rich (6.9%, 9.2%), SFC1 + SFC2 (4%, 7%), Pb-Sn-Se (2.3%, 1.66%), Cu-Cd-Pb (0.67%, 2.2%) and Cr-Ni-Mn (0.57%, 0.47%). Most of these sources had the highest relative contributions during late night (22:00 local time (LT)) and early morning hours (between 03:00 to 08:00 LT), which is consistent with enhanced emissions into a shallow boundary layer. Modelling of airmass source geography revealed that the Pb-Sn-Se, Cl-Br-Se and SFC2 factors prevailed for northwest winds (Pakistan, Punjab, Haryana and Delhi), while the Cu-Cd-Pb and S-rich factors originated from east (Nepal and Uttar Pradesh) and the Cr-Ni-Mn factor from northeast (Uttar Pradesh). In contrast, SFC1, dust and non-exhaust were not associated with any specific wind direction.
RESUMO
Hourly trace element measurements were performed in an urban street canyon and next to an interurban freeway in Switzerland during more than one month each, deploying a rotating drum impactor (RDI) and subsequent sample analysis by synchrotron radiation X-ray fluorescence spectrometry (SR-XRF). Antimony and other brake wear associated elements were detected in three particle size ranges (2.5-10, 1-2.5, and 0.1-1 microm). The hourly measurements revealed that the effect of resuspended road dust has to be taken into account for the calculation of vehicle emission factors. Individual values for light and heavy duty vehicles were obtained for stop-and-go traffic in the urban street canyon. Mass based brake wear emissions were predominantly found in the coarse particle fraction. For antimony, determined emission factors were 11 +/- 7 and 86 +/- 42 microg km(-1) vehicle(-1) for light and heavy duty vehicles, respectively. Antimony emissions along the interurban freeway with free-flowing traffic were significantly lower. Relative patterns for brake wear related elements were very similar for both considered locations. Beside vehicle type specific brake wear emissions, road dust resuspension was found to be a dominant contributor of antimony in the street canyon.