RESUMO
The design and development of electromagnetic and magnetoelectric materials with enhanced properties and performance are desirable for numerous technologies, which are based on integrated electromagnetic materials and components. Nevertheless, engineering the crystalline materials with multi-complex chemistry and multiple cations is challenging. In this context, herein, we report on the effect of rare-earth (RE) cations, namely, Dy3+ and Tb3+, co-substituted into the Co-Ni-mixed ferrite materials for applications in stress/torque sensors. The RE-cations that co-substituted Co-Ni-ferrite materials with a composition of Ni0.8Co0.2Fe2-x(Dy1-yTby)xO4 (x = 0-0.1, y = 0.3; NCFDT) were prepared by the high-temperature solid-state chemical reaction method. The effect of variable composition (x) on the structure, morphology, chemical bonding, and magnetic properties of NCFDT materials is investigated in detail, and the structure-property optimization enabled realizing magnetostrictive NCFDT for sensor applications. X-ray diffraction analysis coupled with Rietveld refinement confirms the face-centered cubic crystal structure. Chemical bonding analysis made using Raman spectroscopic and Fourier transform infrared spectroscopic measurements validates the active modes corresponding to the spinel ferrite structure. The effect of Dy3+ and Tb3+ substitution is primarily seen in the grain size (range of 5-15 µm), as evident from the scanning electron microscopy patterns. Energy-dispersive spectroscopy confirms the presence of all constituent elements with expected composition and without any impurities. The magnetic property measurements indicate that the remnant magnetization (Mr) increases from 0.06 to 0.17 µB/f.u. with the rare-earth (Dy and Tb) substitution and has achieved the maximum squareness ratio (Mr/Ms) = 0.097 at x = 0.10. To validate their application potential in magneto-mechanical sensors, we have measured the magnetostriction coefficients (λ11 and λ12), which demonstrate high values of λ11 = -92 ppm (along the parallel direction) and λ12 = 66 ppm (along the perpendicular direction) for NCFDT with x = 0.05 at H = 7000 Oe. In addition, the maximum value of strain sensitivity is observed, particularly dλ11dH = -0.764 nm/A whereas dλ12dH = 0.361 nm/A. The correlation between strain sensitivity (dλ/dH) and susceptibility (dM/dH), as derived from magnetostriction and magnetization measurements, respectively, is established. The outcomes of this study indicate that Ni-Co-ferrites with Dy3+ and Tb3+ substitution are suitable for stress/torque sensors. These NCFDT ferrites may also be useful as a necessary constitutive phase for the manufacture of magnetoelectric composite materials, making them appropriate for magnetic field sensors and energy harvesting applications.
RESUMO
Designing electromagnetic materials, particularly those based on transition-metal-containing spinel ferrites, with a controlled structure, phase, and chemistry at the nanoscale dimensions while realizing enhanced electrical and magnetic properties continues to be a challenging problem. Herein, we report on the synthesis and structure-property correlation of dysprosium (Dy)-substituted iron-rich cobalt ferrite (Co0.8Fe2.2-xDyxO4; CFDO; x = 0.000-0.100) oxides with variable Dy3+ concentration. Chemical bonding analyses of CFDO nanomaterials using Raman spectroscopic analyses supported the spinel phase formation with high quality. Cation distribution determined from Mössbauer spectroscopy reveals the fact that Dy3+ occupies the octahedral site of the spinel lattice. Saturation magnetization (Ms) values calculated using Neel's two-sublattice model and cation distribution derived from Mossbauer's studies correlate well with the magnetization values obtained from SQUID measurements. The B-site hyperfine field decreases from 52.24 ± 0.10 to 49.26 ± 0.00 T, as evidenced by the Mössbauer spectra, with Dy substitution, which decreases the Fe-ion occupancy from the octahedral site of CFDO. Frequency-dependent dielectric constant indicates electron hopping in the grain interior, which ceases above 6.3 kHz. Dielectric measurements indicate that these CFDO compounds are useful for absorption at higher frequencies. Thus, using the combined approach based on Raman and Mössbauer spectroscopic analyses, the present work elucidates the structure, chemical bonding, and magnetic properties of Dy-substituted Fe-rich cobalt ferrite. CFDO may serve as a model system to apply to a class of Fe-rich ferromagnetic nanomaterials for electromagnetic and sensor applications.