RESUMO
Recently, concerns have been raised about the safety of titanium dioxide (TiO2), a commonly used component of pharmaceutical film coatings. The European Union has recently prohibited the application of this material in the food industry, and it is anticipated that the same will happen in the pharmaceutical industry. For this reason, pharmaceutical manufacturers have to consider the possible impact of removing TiO2 from the film coating of tablets. In this paper, we present a case study of a commercially produced tablet where the film coating containing TiO2 was replaced with a coating using calcium carbonate (CaCO3) or with a transparent coating. The performance of the coatings was compared by measuring the moisture absorption rate and the dissolution profile of the tablets. In these regards, there were negligible differences between the coating types. The tablets contained a highly photosensitive drug, the ability of the coatings to protect the drug was evaluated through environmental stability and photostability measurements. The HPLC results showed that the inclusion of TiO2 does not provide additional benefits, when humidity and thermal stress is applied, however its role was vital in protecting the drug from external light. There were several decomposition products which appeared in large quantities when TiO2 was missing from the coating. These results imply that photosensitivity is an issue, replacing TiO2 will be challenging, though its absence can be tolerated when the drug does not need to be protected from light.
RESUMO
Surface powder sticking in pharmaceutical mixing vessels poses a risk to the uniformity and quality of drug formulations. This study explores methods for evaluating the amount of pharmaceutical powder mixtures adhering to the metallic surfaces. Binary powder blends consisting of amlodipine and microcrystalline cellulose (MCC) were used to investigate the effect of the mixing order on the adherence to the vessel wall. Elevated API concentrations were measured on the wall and within the dislodged material from the surface, regardless of the mixing order of the components. UV imaging was used to determine the particle size and the distribution of the API on the metallic surface. The results were compared to chemical maps obtained by Raman chemical imaging. The combination of UV and VIS imaging enabled the rapid acquisition of chemical maps, covering a substantially large area representative of the analysed sample. UV imaging was also applied in tablet inspection to detect tablets that fail to meet the content uniformity criteria. The results present powder adherence as a possible source of poor content uniformity, highlighting the need for 100% inspection of pharmaceutical products to ensure product quality and safety.
Assuntos
Diagnóstico por Imagem , Pós/química , Composição de Medicamentos/métodos , Comprimidos/química , Tamanho da PartículaRESUMO
This work presents a system, where deep learning was used on images captured with a digital camera to simultaneously determine the API concentration and the particle size distribution (PSD) of two components of a powder blend. The blend consisted of acetylsalicylic acid (ASA) and calcium hydrogen phosphate (CHP), and the predicted API concentration was found corresponding with the HPLC measurements. The PSDs determined with the method corresponded with those measured with laser diffraction particle size analysis. This novel method provides fast and simple measurements and could be suitable for detecting segregation in the powder. By examining the powders discharged from a batch blender, the API concentrations at the top and bottom of the container could be measured, yielding information about the adequacy of the blending and improving the quality control of the manufacturing process.
Assuntos
Aprendizado Profundo , Pós , Tamanho da Partícula , Cromatografia Líquida de Alta Pressão , Tecnologia Farmacêutica/métodosRESUMO
In this work, the performance of two fast chemical imaging techniques, Raman and near-infrared (NIR) imaging is compared by utilizing these methods to predict the rate of drug release from sustained-release tablets. Sustained release is provided by adding hydroxypropyl methylcellulose (HPMC), as its concentration and particle size determine the dissolution rate of the drug. The chemical images were processed using classical least squares; afterwards, a convolutional neural network was applied to extract information regarding the particle size of HPMC. The chemical images were reduced to an average HPMC concentration and a predicted particle size value; these were used as inputs in an artificial neural network with a single hidden layer to predict the dissolution profile of the tablets. Both NIR and Raman imaging yielded accurate predictions. As the instrumentation of NIR imaging allows faster measurements than Raman imaging, this technique is a better candidate for implementing a real-time technique. The introduction of chemical imaging in the routine quality control of pharmaceutical products would profoundly change quality assurance in the pharmaceutical industry.
RESUMO
This paper presents a machine learning-based image analysis method to monitor the particle size distribution of fluidized granules. The key components of the direct imaging system are a rigid fiber-optic endoscope, a light source and a high-speed camera, which allow for real-time monitoring of the granules. The system was implemented into a custom-made 3D-printed device that could reproduce the particle movement characteristic in a fluidized-bed granulator. The suitability of the method was evaluated by determining the particle size distribution (PSD) of various granule mixtures within the 100-2000 µm size range. The convolutional neural network-based software was able to successfully detect the granules that were in focus despite the dense flow of the particles. The volumetric PSDs were compared with off-line reference measurements obtained by dynamic image analysis and laser diffraction. Similar trends were observed across the PSDs acquired with all three methods. The results of this study demonstrate the feasibility of performing real-time particle size analysis using machine vision as an in-line process analytical technology (PAT) tool.
Assuntos
Química Farmacêutica , Redes Neurais de Computação , Tamanho da Partícula , Química Farmacêutica/métodos , Diagnóstico por Imagem , Tecnologia FarmacêuticaRESUMO
In this work, the capabilities of a state-of-the-art fast Raman imaging apparatus are exploited to gain information about the concentration and particle size of hydroxypropyl methylcellulose (HPMC) in sustained release tablets. The extracted information is utilized to predict the in vitro dissolution profile of the tablets. For the first time, convolutional neural networks (CNNs) are used for the processing of the chemical images of HPMC distribution and to directly predict the dissolution profile based on the image. This new method is compared to wavelet analysis, which gives a quantification of the texture of HPMC distribution, carrying information regarding both concentration and particle size. A total of 112 training and 32 validation tablets were used, when a CNN was used to characterize the particle size of HPMC, the dissolution profile of the validation tablets was predicted with an average f2 similarity value of 62.95. Direct prediction based on the image had an f2 value of 54.2, this demonstrates that the CNN is capable of recognizing the patterns in the data on its own. The presented methods can facilitate a better understanding of the manufacturing processes, as detailed information becomes available with fast measurements.
Assuntos
Metilcelulose , Redes Neurais de Computação , Metilcelulose/química , Solubilidade , Preparações de Ação Retardada/química , Derivados da Hipromelose , Comprimidos/químicaRESUMO
Continuous crystallization in the presence of polymer additives is a promising method to omit some drug formulation steps by improving the technological and also pharmacological properties of crystalline active ingredients. Accordingly, this study focuses on developing an additive-assisted continuous crystallization process using polyvinylpyrrolidone in a connected ultrasonicated plug flow crystallizer and an overflow mixed suspension mixed product removal (MSMPR) crystallizer system. We aimed to improve the flowability characteristics of small, columnar primary plug flow crystallizer-produced acetylsalicylic acid crystals as a model drug by promoting their agglomeration in MSMPR crystallizer with polyvinylpyrrolidone. The impact of the cooling antisolvent crystallization process parameters (temperature, polymer amount, total flow rate) on product quality and quantity was investigated. Finally, a spatially segmented antisolvent dosing method was also evaluated. The developed technology enabled the manufacture of purified, constant quality products in a short startup period, even with an 85% yield. We found that a higher polymer amount (7.5-14%) could facilitate agglomeration resulting in "good" flowability without altering the favorable dissolution characteristics of the primary particles.
Assuntos
Polímeros , Povidona , Aspirina , Cristalização/métodos , Transição de Fase , SolubilidadeRESUMO
As the pharmaceutical industry increasingly adopts the Pharma 4.0. concept, there is a growing need to effectively predict the product quality based on manufacturing or in-process data. Although artificial neural networks (ANNs) have emerged as powerful tools in data-rich environments, their implementation in pharmaceutical manufacturing is hindered by their black-box nature. In this work, ANNs were developed and interpreted to demonstrate their applicability to increase process understanding by retrospective analysis of developmental or manufacturing data. The in vitro dissolution and hardness of extended-release, directly compressed tablets were predicted from manufacturing and spectroscopic data of pilot-scale development. The ANNs using material attributes and operational parameters provided better results than using NIR or Raman spectra as predictors. ANNs were interpreted by sensitivity analysis, helping to identify the root cause of the batch-to-batch variability, e.g., the variability in particle size, grade, or substitution of the hydroxypropyl methylcellulose excipient. An ANN-based control strategy was also successfully utilized to mitigate the batch-to-batch variability by flexibly operating the tableting process. The presented methodology can be adapted to arbitrary data-rich manufacturing steps from active substance synthesis to formulation to predict the quality from manufacturing or development data and gain process understanding and consistent product quality.
Assuntos
Redes Neurais de Computação , Tecnologia Farmacêutica , Estudos Retrospectivos , Análise Espectral , Derivados da Hipromelose , Comprimidos/química , Tecnologia Farmacêutica/métodosRESUMO
The release of the FDA's guidance on Process Analytical Technology has motivated and supported the pharmaceutical industry to deliver consistent quality medicine by acquiring a deeper understanding of the product performance and process interplay. The technical opportunities to reach this high-level control have considerably evolved since 2004 due to the development of advanced analytical sensors and chemometric tools. However, their transfer to the highly regulated pharmaceutical sector has been limited. To this respect, data fusion strategies have been extensively applied in different sectors, such as food or chemical, to provide a more robust performance of the analytical platforms. This survey evaluates the challenges and opportunities of implementing data fusion within the PAT concept by identifying transfer opportunities from other sectors. Special attention is given to the data types available from pharmaceutical manufacturing and their compatibility with data fusion strategies. Furthermore, the integration into Pharma 4.0 is discussed.
Assuntos
Indústria Farmacêutica , Tecnologia Farmacêutica , Indústria Farmacêutica/organização & administração , Preparações Farmacêuticas/normas , Controle de Qualidade , Tecnologia Farmacêutica/métodos , Tecnologia Farmacêutica/organização & administração , Estados Unidos , United States Food and Drug AdministrationRESUMO
Industry 4.0 has started to transform the manufacturing industries by embracing digitalization, automation, and big data, aiming for interconnected systems, autonomous decisions, and smart factories. Machine learning techniques, such as artificial neural networks (ANN), have emerged as potent tools to address the related computational tasks. These advancements have also reached the pharmaceutical industry, where the Process Analytical Technology (PAT) initiative has already paved the way for the real-time analysis of the processes and the science- and risk-based flexible production. This paper aims to assess the potential of ANNs within the PAT concept to aid the modernization of pharmaceutical manufacturing. The current state of ANNs is systematically reviewed for the most common manufacturing steps of solid pharmaceutical products, and possible research gaps and future directions are identified. In this way, this review could aid the further development of machine learning techniques for pharmaceutical production and eventually contribute to the implementation of intelligent manufacturing lines with automated quality assurance.
Assuntos
Indústria Farmacêutica , Tecnologia Farmacêutica , Automação , Redes Neurais de Computação , Preparações Farmacêuticas , Tecnologia Farmacêutica/métodosRESUMO
This paper presents a system, where images acquired with a digital camera are coupled with image analysis and deep learning to identify and categorize film coating defects and to measure the film coating thickness of tablets. There were 5 different classes of defective tablets, and the YOLOv5 algorithm was utilized to recognize defects, the accuracy of the classification was 98.2%. In order to characterize coating thickness, the diameter of the tablets in pixels was measured, which was used to measure the coating thickness of the tablets. The proposed system can be easily scaled up to match the production capability of continuous film coaters. With the developed technique, the complete screening of the produced tablets can be achieved in real-time resulting in the improvement of quality control.
Assuntos
Química Farmacêutica , Aprendizado Profundo , Química Farmacêutica/métodos , Composição de Medicamentos/métodos , Controle de Qualidade , Comprimidos , Tecnologia Farmacêutica/métodosRESUMO
The potential of machine vision systems has not currently been exploited for pharmaceutical applications, although expected to provide revolutionary solutions for in-process and final product testing. The presented paper aimed to analyze the particle size of meloxicam, a yellow model active pharmaceutical ingredient, in intact tablets by a digital UV/VIS imaging-based machine vision system. Two image processing algorithms were developed and coupled with pattern recognition neural networks for UV and VIS images for particle size-based classification of the prepared tablets. The developed method can identify tablets containing finer or larger particles than the target with more than 97% accuracy. Two algorithms were developed for UV and VIS images for particle size analysis of the prepared tablets. According to the applied statistical tests, the obtained particle size distributions were similar to the results of the laser diffraction-based reference method. Digital UV/VIS imaging combined with multivariate data analysis can provide a new non-destructive, rapid, in-line tool for particle size analysis in tablets.
Assuntos
Redes Neurais de Computação , Meloxicam , Análise Multivariada , Tamanho da Partícula , ComprimidosRESUMO
In this paper, the applicability of Raman chemical imaging for the non-destructive prediction of the in vitro dissolution profile of sustained-release tablets is demonstrated for the first time. Raman chemical maps contain a plethora of information about the spatial distribution and the particle size of the components, compression force and even polymorphism. With proper data analysis techniques, this can be converted into simple numerical information which can be used as input in a machine learning model. In our work, sustained-release tablets using hydroxypropyl methylcellulose (HPMC) as matrix polymer are prepared, the concentration and particle size of this component varied between samples. Chemical maps of HPMC are converted into histograms with two different methods, an approach based on discretizing concentration values and a wavelet analysis technique. These histograms are then subjected to Principal Component Analysis, the score value of the first two principal components was found to represent HPMC content and particle size. These values are used as input in Artificial Neural Networks which are trained to predict the dissolution profile of the tablets. As a result, accurate predictions were obtained for the test tablets (the average f2 similarity value is higher than 59 with both methods). The presented methodology lays the foundations of the analysis of far more extensive datasets acquired with the emerging fast Raman imaging technology.
Assuntos
Metilcelulose , Preparações de Ação Retardada/química , Derivados da Hipromelose , Metilcelulose/química , Solubilidade , Comprimidos/químicaRESUMO
Mucoadhesion testing at macroscopic scale needs a robust, convenient in vitro method as ex vivo methods suffer from poor reproducibility and ethical problems. Here we synthesized mucin-free poly(vinyl alcohol) (PVA) and mucin-containing PVA hydrogel substrates (Muc/PVA) to measure adhesion of polymer tablets. Freezing-thawing method was used for gelation to avoid chemical cross-linking and to preserve the functionality of mucin. The adhesion of first generation mucoadhesive polymers, poly(acrylic acid) (PAA) and hydroxypropylmethylcellulose (HPMC) was tested with outstanding reproducibility on individual batches of hydrogels and qualitative agreement with ex vivo literature data. Negatively charged PAA was less adhesive on Muc/PVA surface than on mucin-free PVA whereas HPMC as a neutral polymer displayed similar adhesion strength on both surfaces. Chitosan as a positively charged polymer showed enhanced adhesion on Muc/PVA substrate compared to mucin-free PVA. These results are corroborated by turbidimetric titration which indicated attractive electrostatic interactions between chitosan and mucin in contrast to the lack of attractive interactions for PAA and HPMC. These results prove the role of electronic theory in macroscopic mucoadhesion.
Assuntos
Quitosana , Álcool de Polivinil , Hidrogéis/química , Mucinas , Polímeros , Álcool de Polivinil/química , Reprodutibilidade dos TestesRESUMO
This paper presents new machine vision-based methods for indirect real-time quantification of ultralow drug content during continuous twin-screw wet granulation and tableting. Granulation was performed with a solution containing carvedilol (CAR) as API in the ultralow dose range (0.05w/w% in the granule) and the addition of riboflavin (RI) as a coloured tracer. An in-line calibration in the range of 0.047-0.058 w/w% was prepared for the measurement of CAR concentration using colour analysis (CA) and particle size analysis (PSA), and the validation with HPLC resulted in respective relative errors of 2.62% and 2.30% showing great accuracy. To improve the technique, a second in-line calibration was conducted in a broader CAR concentration range of 0.039-0.063 w/w% utilizing only half the amount of RI (0.045 w/w%), while doubling the output of the granulation line to 2 kg/h, producing a relative error of 4.51% and 4.29%, respectively. Finally, it was shown that the CA technique can also be carried on to monitor the CAR content of tablets in the 42-62 µg dose range with a relative error of 5.20%. Machine vision was proven to be a potent indirect method for the in-line, determination and monitoring of ultralow API content during continuous manufacturing.
Assuntos
Composição de Medicamentos , Tecnologia Farmacêutica , Calibragem , Tamanho da Partícula , ComprimidosRESUMO
In this work spectroscopic measurements, process data and Critical Material Attributes (CMAs) are used to predict the in vitro dissolution profile of sustained-release tablets with three machine learning methods, Artificial Neural Networks (ANN), Support Vector Machines (SVM) and Ensemble of Regression Trees (ERT). Beside the effect of matrix polymer content and compression force, the influence of active pharmaceutical ingredient (API) and matrix polymer particle size distribution (PSD) on the drug release rate of sustained tablets is studied. The matrix polymer PSD was found to be a significant factor, thus this factor was included in the dissolution prediction experiments. In order to evaluate the importance of the inclusion of PSD data, models without PSD data were also prepared and the results were compared. In the developed models, the API and hydroxypropyl-methylcellulose (HPMC) content is predicted from near-infrared (NIR) spectra, the compression force is measured by the tablet press and HPMC particle size is measured off-line. The predictions of ANN, SVM and ERT were compared to the measured dissolution profiles of the validation tablets, ANN yielded the most accurate results. In the presented work, data provided by Process Analytical Technology (PAT) sensors is combined with CMAs for the first time to realize the Real-Time Release Testing (RTRT) of tablet dissolution.
Assuntos
Algoritmos , Espectroscopia de Luz Próxima ao Infravermelho , Preparações de Ação Retardada , Derivados da Hipromelose , Aprendizado de Máquina , Metilcelulose , Tamanho da Partícula , Solubilidade , ComprimidosRESUMO
The goal of this paper is to give an introduction to analysis of images acquired by a digital camera with visible illumination and to review its applications as a Process Analytical Technology (PAT) which has great potential in pharmaceutical manufacturing. By utilizing in-line analytical techniques, it is possible to monitor the quality of all the material leaving a processing unit and to create models capable to predict product quality attributes, which are otherwise measured by cumbersome off-line techniques. The rapidly developing machine vision has proven its versatility in numerous applications and it has great potential as an in-line analytical tool. The ongoing conversion of the pharmaceutical industry from batch to continuous manufacturing accelerated the development of digital image analysis methods in the last decade. Among numerous other benefits, continuous technologies, equipped with digital image analysis, enable detecting disturbances in the material flow, and analyzing the products comprehensively. The purpose of this work is to give an insight into the currently available image analysis methods in the characterization of powders, crystallization, granulation, milling, mixing, tableting, film coating, in vitro dissolution testing, and residence time distribution measurements by highlighting some of the most relevant examples of application.
Assuntos
Preparações Farmacêuticas , Tecnologia Farmacêutica , Cristalização , Indústria Farmacêutica , Pós , ComprimidosRESUMO
In a continuous powder blending process machine vision is utilized as a Process Analytical Technology (PAT) tool. While near-infrared (NIR) and Raman spectroscopy are reliable methods in this field, measurements become challenging when concentrations below 2 w/w% are quantified. However, an active pharmaceutical ingredient (API) with an intense color might be quantified in even lower quantities by images recorded with a digital camera. Riboflavin (RI) was used as a model API with orange color, its Limit of Detection was found to be 0.015 w/w% and the Limit of Quantification was 0.046 w/w% using a calibration based on the pixel value of images. A calibration for in-line measurement of RI concentration was prepared in the range of 0.2-0.45 w/w%, validation with UV/VIS spectrometry showed great accuracy with a relative error of 2.53 %. The developed method was then utilized for a residence time distribution (RTD) measurement in order to characterize the dynamics of the blending process. Lastly, the technique was applied in real-time feedback control of a continuous powder blending process. Machine vision based direct or indirect API concentration determination is a promising and fast method with a great potential for monitoring and control of continuous pharmaceutical processes.
Assuntos
Preparações Farmacêuticas , Espectroscopia de Luz Próxima ao Infravermelho , Calibragem , Retroalimentação , Pós , Tecnologia , Tecnologia FarmacêuticaRESUMO
The Process Analytical Technology (PAT) and the Quality-by-Design (QbD) approaches can efficiently facilitate the shift to the desired continuous manufacturing and real time release testing (RTRT). By this, it is vital to develop new, in-line analytical methods which fulfil the pharmaceutical requirements. The fast-developing digital imaging-based machine vision systems can provide revolutionary solutions not just in the automotive industry but in the pharmaceutical technology, as well. This study aimed to explore the capabilities of UV/VIS-based machine vision in tablet inspection as a PAT tool for the determination of compression force and crushing strength, drug content and drug distribution in tablets using meloxicam a yellow model drug. In the case of determining the compression force and crushing strength, the application of multivariate wavelet texture analysis (MWTA) based models provided relatively low prediction errors. To predict the drug content of meloxicam tablets CIELAB or RGB colorspace based algorithms were successfully developed and validated. UV/VIS imaging was also used to map the particle size distribution and spatial distribution of meloxicam, the results were compared to chemical maps obtained by Raman microscopy. Digital imaging combined with multivariate data analysis might be a valuable, high throughput, in-line PAT tool for automated inspection of pharmaceutical tablets.
Assuntos
Meloxicam/química , Comprimidos/química , Tecnologia Farmacêutica/métodos , Algoritmos , Química Farmacêutica/métodos , Luz , Análise Multivariada , Tamanho da Partícula , Pressão , Raios UltravioletaRESUMO
Preparation and formulation of amorphous solid dispersions (ASDs) are becoming more and more popular in the pharmaceutical field because the dissolution of poorly water-soluble drugs can be effectively improved this way, which can lead to increased bioavailability in many cases. During downstream processing of ASDs, technologists need to keep in mind both traditional challenges and the newest trends. In the last decade, the pharmaceutical industry began to display considerable interest in continuous processing, which can be explained with their potential advantages such as smaller footprint, easier scale-up, and more consistent product, better quality and quality assurance. Continuous downstream processing of drug-loaded ASDs opens new ways for automatic operation. Therefore, the formulation of poorly water-soluble drugs may be more effective and safe. However, developments can be challenging due to the poor flowability and feeding properties of ASDs. Consequently, this review pays special attention to these characteristics since the feeding of the components greatly influences the content uniformity in the final dosage form. The main purpose of this paper is to summarize the most important steps of the possible ASD-based continuous downstream processes in order to give a clear overview of current course lines and future perspectives.