Enhancing Cycle Life of Rechargeable Zinc Hybrid Batteries in a Low-Cost, Nonfluorinated Dual-Cation Electrolyte.

Rechargeable zinc batteries (RZBs) are highly attractive as energy storage solutions due to their low cost and sustainability. Nevertheless, the use of fluorine-free zinc electrolyte systems to create affordable, ecofriendly, and safe RZBs has been largely overlooked in the battery community. Previously, we showcased the utilization of a fluorine-free, nonaqueous electrolyte comprising zinc dicyanamide (Zn(dca)2) in dimethyl sulfoxide (DMSO) to enable the electrochemical cycling of zinc. Herein we present a dual-cation-based electrolyte, [1.0 M Na(dca) +1.0 M Zn(dca)2]/DMSO, in pursuit of a rechargeable zinc hybrid battery. Fourier-transform infrared spectroscopy and molecular dynamics simulation studies indicate that the presence of Na(dca) diminishes ion-pairing in Zn(dca)2 through [dca]- anion bridging between Zn2+ and Na+ ions, thereby enhancing Zn2+ ion transport in the electrolyte. Thus, the electrolyte exhibits high ionic conductivity and transference numbers (tZn2+) of 7.9 mS cm-1 and 0.83, respectively, at 50 °C, making it particularly suitable for high-temperature battery applications. Furthermore, we demonstrate, for the first time, the cycling of a full cell with a zinc anode and triphylite sodium iron phosphate cathode (NFP) in an organic electrolyte, showcasing stable performance over 100 cycles at 0.1C rate. These encouraging findings pave the way for affordable battery technologies using, fluorine-free electrolyte.

Understanding Polymerized Ionic Liquids as Solid Polymer Electrolytes for Sodium Batteries.

Solid polymer electrolytes (SPEs) have emerged as promising candidates for sodium-based batteries due to their cost-effectiveness and excellent flexibility. However, achieving high ionic conductivity and desirable mechanical properties in SPEs remains a challenge. In this study, we investigated an AB diblock copolymer, PS-PEA(BuImTFSI), as a potential SPE for sodium batteries. We explored binary and ternary electrolyte systems by combining the polymer with salt and [C3mpyr][FSI] ionic liquid (IL) and analyzed their thermal and electrochemical properties. Differential scanning calorimetry revealed phase separation in the polymer systems. The addition of salt exhibited a plasticizing effect localized to the polyionic liquid (PIL) phase, resulting in an increased ionic conductivity in the binary electrolytes. Introducing the IL further enhanced the plasticizing effect, elevating the ionic conductivity in the ternary system. Spectroscopic analysis, for the first time, revealed that the incorporation of NaFSI and IL influences the conformation of TFSI- and weakens the interaction between TFSI- and the polymer. This establishes correlations between anions and Na+, ultimately enhancing the diffusivity of Na ions. The electrochemical properties of an optimized SPE in Na/Na symmetrical cells were investigated, showcasing stable Na plating/stripping at high current densities up to 0.7 mA cm-2, maintaining its integrity at 70 °C. Furthermore, we evaluated the performance of a Na|NaFePO4 cell cycled at different rates (C/10 and C/5) and temperatures (50 and 70 °C), revealing remarkable high-capacity retention and Coulombic efficiency. This study highlights the potential of solvent-free diblock copolymer electrolytes for high-performance sodium-based energy storage systems, contributing to advanced electrolyte materials.

Task-Specific Phosphonium Iongels by Fast UV-Photopolymerization for Solid-State Sodium Metal Batteries.

Sodium metal batteries are an emerging technology that shows promise in terms of materials availability with respect to lithium batteries. Solid electrolytes are needed to tackle the safety issues related to sodium metal. In this work, a simple method to prepare a mechanically robust and efficient soft solid electrolyte for sodium batteries is demonstrated. A task-specific iongel electrolyte was prepared by combining in a simple process the excellent performance of sodium metal electrodes of an ionic liquid electrolyte and the mechanical properties of polymers. The iongel was synthesized by fast (<1 min) UV photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of a saturated 42%mol solution of sodium bis(fluorosulfonyl)imide (NaFSI) in trimethyl iso-butyl phosphonium bis(fluorosulfonyl)imide (P111i4FSI). The resulting soft solid electrolytes showed high ionic conductivity at room temperature (≥10−3 S cm−1) and tunable storage modulus (104−107 Pa). Iongel with the best ionic conductivity and good mechanical properties (Iongel10) showed excellent battery performance: Na/iongel/NaFePO4 full cells delivered a high specific capacity of 140 mAh g−1 at 0.1 C and 120 mAh g−1 at 1 C with good capacity retention after 30 cycles.

The mechanism of NaFePO4 (de)sodiation determined by in situ X-ray diffraction.

The reaction mechanism occurring during the (de)intercalation of sodium into the host olivine FePO4 structure is thoroughly analysed through a combination of structural and electrochemical methods. In situ XRD experiments have confirmed that the charge and discharge reaction mechanisms are different and have revealed the existence of a solid solution domain from 1 < x < 2/3 in Na(x)FePO4 upon charge. The second part of the charge proceeds through a 2-phase reaction between Na(2/3)FePO4 and FePO4 with strongly varying solubility limits. The strong cell mismatch between Na(2/3)FePO4 and FePO4 enhances the effects of the diffuse interface and therefore varying solubility limits are first observed here in micrometric materials.

New microarchitectures of (Er,Yb):Lu2O3 nanocrystals embedded in PMMA: synthesis, structural characterization, and luminescent properties.

We report the formation of two-dimensional disordered arrays of poly(methyl)methacrylate (PMMA) microcolumns with embedded single size distribution of Lu0.990Er0.520Yb0.490 nanocrystals, (Er,Yb):Lu2O3, using a disordered porous silicon template. The cubic (Er,Yb):Lu2O3 nanocrystals, which crystallize into the cubic system with Ia3¯ space group, were synthesized using the modified Pechini method. Electronic microscopic techniques were used to study the distribution of the nanocrystals in the PMMA columns. Cathodoluminescence was used to observe the visible luminescence of the particles. Red emission attributed to 4 F9/2 → 4I15/2 erbium transition is predominant in these new composites.