Protective treatments for copper alloy artworks: preliminary studies of sodium oxalate and limewater effectiveness against bronze disease.

Nantokite (CuCl) locked inside subsurface micro-pits has been recognised as the driving force to the form of corrosion called bronze disease. The use of the traditional corrosion inhibitor benzotriazole is questioned because of toxicity. So there is a need for alternative conservation treatments. This work is focused on the experimental design to test the effectiveness of sodium oxalate followed by treatment with limewater to face bronze disease on outdoor bronzes. A number of foundry bronze coupons were exposed to weathering at Genoa Experimental Marine Station (GEMS) exposure site and sprayed twice a week with a 5% NaCl solution for the first 124 days. After 562 days of natural weathering, the patinas on coupons were characterised with non-destructive techniques (NDT) and the presence of nantokite was verified. We designed a workflow, as similar as possible to conservation treatments on real artworks, to test a 3% w/v sodium oxalate treatment with two different application times, with or without limewater, on the coupons. The effectiveness of the treatments was analysed by comparison of surface properties by several NDT measurements. A statistical approach and XRD measurements directly on the corroded bronze surfaces are suggested as an effective way to characterise and compare the overall behaviour of bronze disease treatments for conservation.

A follow-up on the analytical study of discolouration of the marble statues of Orsanmichele in Florence.

The research complements the complex study carried out to understand the source of brown discolourations of ten marble statues in the Church of Orsanmichele in Florence, Italy. Originally located in exterior niches, the statues were restored to reverse the extensive alterations they had undergone throughout the centuries. One of the major alterations was the application of a dark brown patina that dated just after 1789. After the statues were placed indoors, brownish discolourations started to appear on their surfaces. Cross sections were examined using FTIR mapping and immunological methods. In parallel, the pyrolysis-gas chromatography/mass spectrometry (py-GC/MS) data already obtained from the statues' scrapings were compared with data from aged casein films applied to microscope glass slides and aged milk-treated marble. All the statues had been treated with milk-based substances before the time the bronze patina was applied. The values of temperature and illumination of the room were important factors in the ageing of organic substances and in the formation of calcium oxalates. It is likely that products of thermo-oxidation and photo-oxidation of the oils together with the oxalates caused the darkening. The marble samples corresponded to a Lunense provenance.

Comparative study of Fourier transform infrared spectroscopy in transmission, attenuated total reflection, and total reflection modes for the analysis of plastics in the cultural heritage field.

This study was completed within the framework of two research projects dealing with the conservation of contemporary artworks. The first is the Seventh Framework Project (FP7) of the European Union, Preservation of Plastic ARTefacts in Museum Collections (POPART), spanning years 2008-2012, and the second is the Italian project funded by the Tuscan Region, Preventive Conservation of Contemporary Art (Conservazione Preventiva dell'Arte Contemporanea (COPAC)), spanning 2011-2013. Both of these programs pointed out the great importance of having noninvasive and portable analytical techniques that can be used to investigate and characterize modern and contemporary artworks, especially those consisting of synthetic polymers. Indeed, despite the extensive presence of plastics in museum collections, there is still a lack of analytical tools for identifying, characterizing, and setting up adequate conservation strategies for these materials. In this work, the potentials of in situ and noninvasive Fourier transform infrared (FT-IR) spectroscopy, implemented by means of portable devices that operate in reflection mode, are investigated with a view to applying the results in large-scale surveys of plastic objects in museums. To this end, an essential prerequisite are the reliability of spectral data acquired in situ and the availability of spectral databases acquired from reference materials. A collection of polymeric samples, which are available commercially as ResinKit, was analyzed to create a reference spectral archive. All the spectra were recorded using three FT-IR configurations: transmission (trans), attenuated total reflection (ATR), and total reflection (TR). A comparative evaluation of the data acquired using the three instrumental configurations is presented, together with an evaluation of the similarity percentages and a discussion of the critical cases.

Monitoring the performance of innovative and traditional biocides mixed with consolidants and water-repellents for the prevention of biological growth on stone.

In this study, some mixtures of consolidants or water-repellent products and biocides developed to prevent biological growth, were tested over time on three stone substrates with different bioreceptivity. The performance of both traditional (tetraethylorthosilicate, methylethoxy polysiloxane, Paraloid B72, tributyltin oxide, dibutyltin dilaurate) and innovative compounds (copper nanoparticles) was assessed using colour measurements, the water absorption by contact sponge method, and observation under stereo and optical microscopes. The application of the mixtures had also the purpose of controlling re-colonization on stone after a conservation treatment. The study site was the archaeological Area of Fiesole; the mixtures were applied in situ to sandstone, marble and plaster which had been cleaned beforehand. An innovative aspect of the study is that, by using non-invasive methods, it also permitted monitoring the mixtures' effectiveness in preventing biological growth. The monitoring results made it possible to assess the bioreceptivity of the treated stones (sandstone, marble, plaster) over a period of almost three years. The results showed that the mixtures of consolidants or water-repellent products with biocides were effective in preventing biological growth on both a substrate with low bioreceptivity like plaster and a substrate with high bioreceptivity such as marble. The innovative mixture of nano-Cu particles with a water-repellent yielded good results in terms of preventing biological colonization. Moreover, they apparently did not affect the substrates' colour. Mixtures of nano-Cu particles with a consolidant and a water-repellent hold great promise for preventing re-colonization of stone after conservation treatment.

Non-destructive and non-invasive analyses shed light on the realization technique of ancient polychrome prints.

Five polychrome prints representing famous painters, such as Albrecht Dürer, were analyzed using a non-destructive and non-invasive methodology as required by the artwork typology. The diagnostic strategy includes X-ray fluorescence (XRF), reflectance micro-infrared (microFTIR) and micro-Raman (microRaman) spectroscopy. These prints were realized with a la poupée method that involves application of the polychrome inks on a single copper plate, before the printing process. A broad range of compounds (i.e., cinnabar, red lead, white lead, umber earth, hydrated calcium sulfate, calcium carbonate, amorphous carbon, and Prussian blue) was employed as chalcographic inks, using linseed oil as a binding medium. Gamboge was identified in the delicate finishing brush touches realized in watercolor.