Impact of Anionic Ordering on the Iron Site Distribution and Valence States in Oxyfluoride Sr2FeO3+xF1-x (x = 0.08, 0.2) with a Layered Perovskite Network.

Sr2FeO3F, an oxyfluoride compound with an n = 1 Ruddlesden-Popper structure, was identified as a potential interesting mixed ionic and electronic conductor (MIEC). The phase can be synthesized under a range of different pO2 atmospheres, leading to various degrees of fluorine for oxygen substitution and Fe4+ content. A structural investigation and thorough comparison of both argon- and air-synthesized compounds were performed by combining high-resolution X-ray and electron diffraction, high-resolution scanning transmission electron microscopy, Mössbauer spectroscopy, and DFT calculations. While the argon-synthesized phase shows a well-behaved O/F ordered structure, this study revealed that oxidation leads to averaged large-scale anionic disorder on the apical site. In the more oxidized Sr2FeO3.2F0.8 oxyfluoride, containing 20% of Fe4+, two different Fe positions can be identified with a 32%/68% occupancy (P4/nmm space group). This originates due to the presence of antiphase boundaries between ordered domains within the grains. Relations between site distortion and valence states as well as stability of apical anionic sites (O vs F) are discussed. This study paves the way for further studies on both ionic and electronic transport properties of Sr2FeO3.2F0.8 and its use in MIEC-based devices, such as solid oxide fuel cells.

Toward Understanding of the Li-Ion Migration Pathways in the Lithium Aluminum Sulfides Li3AlS3 and Li4.3AlS3.3Cl0.7 via 6,7Li Solid-State Nuclear Magnetic Resonance Spectroscopy.

Li-containing materials providing fast ion transport pathways are fundamental in Li solid electrolytes and the future of all-solid-state batteries. Understanding these pathways, which usually benefit from structural disorder and cation/anion substitution, is paramount for further developments in next-generation Li solid electrolytes. Here, we exploit a range of variable temperature 6Li and 7Li nuclear magnetic resonance approaches to determine Li-ion mobility pathways, quantify Li-ion jump rates, and subsequently identify the limiting factors for Li-ion diffusion in Li3AlS3 and chlorine-doped analogue Li4.3AlS3.3Cl0.7. Static 7Li NMR line narrowing spectra of Li3AlS3 show the existence of both mobile and immobile Li ions, with the latter limiting long-range translational ion diffusion, while in Li4.3AlS3.3Cl0.7, a single type of fast-moving ion is present and responsible for the higher conductivity of this phase. 6Li-6Li exchange spectroscopy spectra of Li3AlS3 reveal that the slower moving ions hop between non-equivalent Li positions in different structural layers. The absence of the immobile ions in Li4.3AlS3.3Cl0.7, as revealed from 7Li line narrowing experiments, suggests an increased rate of ion exchange between the layers in this phase compared with Li3AlS3. Detailed analysis of spin-lattice relaxation data allows extraction of Li-ion jump rates that are significantly increased for the doped material and identify Li mobility pathways in both materials to be three-dimensional. The identification of factors limiting long-range translational Li diffusion and understanding the effects of structural modification (such as anion substitution) on Li-ion mobility provide a framework for the further development of more highly conductive Li solid electrolytes.

Li4.3AlS3.3Cl0.7: A Sulfide-Chloride Lithium Ion Conductor with Highly Disordered Structure and Increased Conductivity.

Mixed anion materials and anion doping are very promising strategies to improve solid-state electrolyte properties by enabling an optimized balance between good electrochemical stability and high ionic conductivity. In this work, we present the discovery of a novel lithium aluminum sulfide-chloride phase, obtained by substitution of chloride for sulfur in Li3AlS3 and Li5AlS4 materials. The structure is strongly affected by the presence of chloride anions on the sulfur site, as the substitution was shown to be directly responsible for the stabilization of a higher symmetry phase presenting a large degree of cationic site disorder, as well as disordered octahedral lithium vacancies. The effect of disorder on the lithium conductivity properties was assessed by a combined experimental-theoretical approach. In particular, the conductivity is increased by a factor 103 compared to the pure sulfide phase. Although it remains moderate (10-6 S·cm-1), ab initio molecular dynamics and maximum entropy (applied to neutron diffraction data) methods show that disorder leads to a 3D diffusion pathway, where Li atoms move thanks to a concerted mechanism. An understanding of the structure-property relationships is developed to determine the limiting factor governing lithium ion conductivity. This analysis, added to the strong step forward obtained in the determination of the dimensionality of diffusion, paves the way for accessing even higher conductivity in materials comprising an hcp anion arrangement.

Element selection for crystalline inorganic solid discovery guided by unsupervised machine learning of experimentally explored chemistry.

The selection of the elements to combine delimits the possible outcomes of synthetic chemistry because it determines the range of compositions and structures, and thus properties, that can arise. For example, in the solid state, the elemental components of a phase field will determine the likelihood of finding a new crystalline material. Researchers make these choices based on their understanding of chemical structure and bonding. Extensive data are available on those element combinations that produce synthetically isolable materials, but it is difficult to assimilate the scale of this information to guide selection from the diversity of potential new chemistries. Here, we show that unsupervised machine learning captures the complex patterns of similarity between element combinations that afford reported crystalline inorganic materials. This model guides prioritisation of quaternary phase fields containing two anions for synthetic exploration to identify lithium solid electrolytes in a collaborative workflow that leads to the discovery of Li3.3SnS3.3Cl0.7. The interstitial site occupancy combination in this defect stuffed wurtzite enables a low-barrier ion transport pathway in hexagonal close-packing.

Li6SiO4Cl2: A Hexagonal Argyrodite Based on Antiperovskite Layer Stacking.

A hexagonal analogue, Li6SiO4Cl2, of the cubic lithium argyrodite family of solid electrolytes is isolated by a computation-experiment approach. We show that the argyrodite structure is equivalent to the cubic antiperovskite solid electrolyte structure through anion site and vacancy ordering within a cubic stacking of two close-packed layers. Construction of models that assemble these layers with the combination of hexagonal and cubic stacking motifs, both well known in the large family of perovskite structural variants, followed by energy minimization identifies Li6SiO4Cl2 as a stable candidate composition. Synthesis and structure determination demonstrate that the material adopts the predicted lithium site-ordered structure with a low lithium conductivity of ∼10-10 S cm-1 at room temperature and the predicted hexagonal argyrodite structure above an order-disorder transition at 469.3(1) K. This transition establishes dynamic Li site disorder analogous to that of cubic argyrodite solid electrolytes in hexagonal argyrodite Li6SiO4Cl2 and increases Li-ion mobility observed via NMR and AC impedance spectroscopy. The compositional flexibility of both argyrodite and perovskite alongside this newly established structural connection, which enables the use of hexagonal and cubic stacking motifs, identifies a wealth of unexplored chemistry significant to the field of solid electrolytes.

One Site, Two Cations, Three Environments: s2 and s0 Electronic Configurations Generate Pb-Free Relaxor Behavior in a Perovskite Oxide.

The piezoelectric devices widespread in society use noncentrosymmetric Pb-based oxides because of their outstanding functional properties. The highest figures of merit reported are for perovskites based on the parent Pb(Mg1/3Nb2/3)O3 (PMN), which is a relaxor: a centrosymmetric material with local symmetry breaking that enables functional properties, which resemble those of a noncentrosymmetric material. We present the Pb-free relaxor (K1/2Bi1/2)(Mg1/3Nb2/3)O3 (KBMN), where the thermal and (di)electric behavior emerges from the discrete structural roles of the s0 K+ and s2 Bi3+ cations occupying the same A site in the perovskite structure, as revealed by diffraction methods. This opens a distinctive route to Pb-free piezoelectrics based on relaxor parents, which we demonstrate in a solid solution of KBMN with the Pb-free ferroelectric (K1/2Bi1/2)TiO3, where the structure and function evolve together, revealing a morphotropic phase boundary, as seen in PMN-derived systems. The detailed multiple-length-scale understanding of the functional behavior of KBMN suggests that precise chemical manipulation of the more diverse local displacements in the Pb-free relaxor will enhance performance.

Computationally Guided Discovery of the Sulfide Li3AlS3 in the Li-Al-S Phase Field: Structure and Lithium Conductivity.

With the goal of finding new lithium solid electrolytes by a combined computational-experimental method, the exploration of the Li-Al-O-S phase field resulted in the discovery of a new sulfide Li3AlS3. The structure of the new phase was determined through an approach combining synchrotron X-ray and neutron diffraction with 6Li and 27Al magic-angle spinning nuclear magnetic resonance spectroscopy and revealed to be a highly ordered cationic polyhedral network within a sulfide anion hcp-type sublattice. The originality of the structure relies on the presence of Al2S6 repeating dimer units consisting of two edge-shared Al tetrahedra. We find that, in this structure type consisting of alternating tetrahedral layers with Li-only polyhedra layers, the formation of these dimers is constrained by the Al/S ratio of 1/3. Moreover, by comparing this structure to similar phases such as Li5AlS4 and Li4.4Al0.2Ge0.3S4 ((Al + Ge)/S = 1/4), we discovered that the AlS4 dimers not only influence atomic displacements and Li polyhedral distortions but also determine the overall Li polyhedral arrangement within the hcp lattice, leading to the presence of highly ordered vacancies in both the tetrahedral and Li-only layer. AC impedance measurements revealed a low lithium mobility, which is strongly impacted by the presence of ordered vacancies. Finally, a composition-structure-property relationship understanding was developed to explain the extent of lithium mobility in this structure type.