RESUMO
In the reaction of oxidizing 5-hydroxymethylfurfural (HMF), attaining high efficiency and selectivity in the conversion of HMF into DFF presents a challenge due to the possibility of forming multiple products. Polyoxometalates are considered highly active catalysts for HMF oxidation. However, the over-oxidation of products poses a challenge, leading to decreased purity and yield. In this work, metal-organic framework-derived Fe3O4/C and Co3O4/C were designed as carriers for the vanadium-substituted Keggin-type polyoxomolybdate H5PMo10V2O40·35H2O (PMo10V2). In this complex system, spinel oxides can effectively adsorb HMF molecules and cooperate with PMo10V2 to catalyze the aerobic oxidation of HMF. As a result, the as-prepared PMo10V2@Fe3O4/C and PMo10V2@Co3O4/C catalysts can achieve efficient conversion of HMF into DFF with almost 100% selectivity. Among them, PMo10V2@Fe3O4/C exhibits a higher conversion rate (99.1%) under milder reaction conditions (oxygen pressure of 0.8 MPa). Both catalysts exhibited exceptional stability and retained their activity and selectivity even after undergoing multiple cycles. Studies on mechanisms by in situ diffuse reflectance infrared Fourier transform spectroscopy and X-ray photoelectron spectroscopy revealed that the V5+ and Mo6+ in PMo10V2, together with the metal ions in the spinel oxides, act as active centers for the catalytic conversion of HMF. Therefore, it is proposed that PMo10V2 and M3O4/C (M = Fe, Co) cooperatively catalyze the transformation of HMF into DFF via a proton-coupled electron transfer mechanism. This study offers an innovative approach for designing highly selective and recyclable biomass oxidation catalysts.
RESUMO
The propulsion of photocatalytic hydrogen (H2 ) production is limited by the rational design and regulation of catalysts with precise structures and excellent activities. In this work, the [MoOS3 ]2- unit is introduced into the CuI clusters to form a series of atomically-precise MoVI -CuI bimetallic clusters of [Cu6 (MoOS3 )2 (C6 H5 (CH2 )S)2 (P(C6 H4 -R)3 )4 ] â xCH3 CN (R=H, CH3 , or F), which show high photocatalytic H2 evolution activities and excellent stability. By electron push-pull effects of the surface ligand, highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels of these MoVI -CuI clusters can be finely tuned, promoting the resultant visible-light-driven H2 evolution performance. Furthermore, MoVI -CuI clusters loaded onto the surface of magnetic Fe3 O4 carriers significantly reduced the loss of catalysts in the collection process, efficiently addressing the recycling issues of such small cluster-based catalyst. This work not only highlights a competitively universal approach on the design of high-efficiency cluster photocatalysts for energy conversion, but also makes it feasible to manipulate the catalytic performance of clusters through a rational substituent strategy.
RESUMO
In this work, a series of Mo-containing polyoxometalates (POMs) modified separators to inhibit the growth of lithium dendrites, and thus improving the lifespan and safety of the cells is proposed. When the deposited lithium forms dendrites and touches the separator, the optimized Dawson-type POM of (NH4 )6 [P2 Mo18 O62 ]·11H2 O (P2 Mo18 ) with the stronger oxidizability, acts like a "killer", is more inclined to oxidize Li0 into Li+ , thus weakening the lethality of lithium dendrites. The above process is accompanied by the formation of Lix [P2 Mo18 O62 ] (x = 6-10) in its reduced state. Converting to the stripping process, the reduced state Lix [P2 Mo18 O62 ] (x = 6-10) can be reoxidized to P2 Mo18 , which achieves the reusability of P2 Mo18 functional material. Meanwhile, lithium ions are released into the cell system to participate in the subsequent electrochemical cycles, thus the undesired lithium dendrites are converted into usable lithium ions to prevent the generation of "dead lithium". As a result, the Li//Li symmetrical cell with P2 Mo18 modified separator delivers exceptional cyclic stability for over 1000 h at 3 mA cm-2 and 5 mAh cm-2 , and the assembled Li-S full cell maintains superior reversible capacity of 600 mAh g-1 after 200 cycles at 2 C.
RESUMO
The main challenge for sodium/potassium ion storage is to find the suitable host materials to accommodate the larger-sized Na+/K+ and conquer the sluggish chemical kinetics. Herein, by selenation of polyoxometalate in electrospinning fiber, a novel MoO2/MoSe2 heterostructure embedded in one-dimensional (1D) N,P-doped carbon nanofiber (MoO2/MoSe2@NPC) is rationally constructed to show distinct enhancement of rate performance and cycle life for sodium ion batteries (SIBs) and potassium ion batteries (PIBs). The 1D skeleton of MoO2/MoSe2@NPC decreases the diffusion pathway of Na+/K+, and the doping of N/P heteroatoms in carbon fiber creates abundant active sites and provides good reachability for Na+/K+ transportation. MoSe2 nanosheets grow in the bulk phase of MoO2 via in situ local phase transformation to achieve effective and firm heterointerfaces. Especially, the exposure extent of heterointerfaces can be controlled by treatment temperature during the preparation process, and the optimized heterointerfaces result in an ideal synergic effect between MoO2 and MoSe2. DFT calculations confirm that the internal electric field in the heterogeneous interface guides the electron transfer from MoO2 to MoSe2, combined with strong adsorption capacity toward sodium/potassium, facilitating ion/electron transfer kinetics. It is confirmed that the MoO2/MoSe2@NPC anode for SIBs delivers 382 mA h g-1 under 0.1 A g-1 upon 200 cycles; meanwhile, a reversible capacity of 266 mA h g-1 is maintained even under 2 A g-1 after 2000 cycles. For PIBs, it can reach up to 216 mA h g-1 in the 200th cycle and still retain 125 mA h g-1 after 2000 cycles under 1 A g-1. This study opens up a new interface manipulation strategy for the design of anode materials to boost fast Na+/K+ storage kinetics.
RESUMO
It has been demonstrated that polyoxometalates (POMs) have strong anchoring abilities with efficient catalysis of lithium polysulfides (LiPSs). However, the severe aggregation that buries the effective active sites of POMs along with poor electrical conductivity limits the practical application of POMs in lithium sulfur batteries (LSBs). In our strategy, we utilized reduced graphene oxide (rGO) to support a POM catalyst entrapped in a MIL-88A(FeCo) network with a hollow shell skeleton as the sulfur host material. H4PW11VO40 (PW11V) with optimal vanadium atom implantation ensures the ruggedness and integrity of the hollow structure, which is conducive to achieving high sulfur loading as well as accommodating the volume change of the sulfur cathode during the charging and discharging process. Importantly, PW11V can capture polysulfides through firm chemical adsorption and accelerate redox reactions of LiPS conversion by effective electrochemical catalysis. Furthermore, the satisfactory electrical conductivity of rGO provides access for electrons to reach the interface of PW11V and polysulfides and trigger Li-S conversion reactions. Thus, the constructed PW11V-based sulfur cathode exhibited a superior specific capacity of 905 mA h g-1 after 100 cycles under 0.2 C and long cycling life with a capacity recession rate of 0.046% for each cycle upon 500 cycles under 3 C. This research reveals the effect of vanadium atom substitution of POMs on the cycling performance of a sulfur cathode and affords insight for developing high-performance LSBs.
RESUMO
For the design of atom-precise copper nanoclusters, besides the exploration of their aesthetic cage-like architectures, their structural modulation and potential applications are being extensively explored. Herein, an atom-precise 20-core copper(I)-alkynyl nanocluster (UJN-Cu20) protected by ethinyloestradiol ligands issynthesized. By virtue of outer-shell hydroxyl groups, UJN-Cu20 could be uniformly modified on the surface of TiO2 nanosheets via hydrogen bonding interactions, thus forming an efficient nanocomposite photocatalyst for hydrogen evolution. By constructing a Z-scheme heterojunction, the photocatalytic hydrogen evolution activity of the nanocomposite (13 mmol g-1 h-1) significantly improved as compared to that of TiO2 nanosheets (0.4 mmol g-1 h-1). As a narrow bandgap cocatalyst, UJN-Cu20 is confirmed to effectively inhibit the electron-hole recombination on the surface of the TiO2 nanosheet, which provides a new concept for the design of copper cluster-assisted effective photocatalysts.
RESUMO
Structural stability and rapid charge-discharge capability of electrode materials are required for high performance lithium-ion batteries (LIBs). The materials derived from polyoxometalates (POMs) show special advantages in inhibiting capacity attenuation, and good dispersion or combination of POMs with metal-organic frameworks (MOFs) is an important method to obtain high activity anode composites for LIBs. In this study, a uniform MoO2/MoS2 heterostructure with surface supported carbon (C-MoO2/MoS2) was successfully fabricated from a [Cu2(BTC)4/3(H2O)2]6[H3PMo12O40] precursor, which showed not only the designed octahedral morphology but also fast charge transfer, long working life, and high rate performance. Superior reversible lithium storage capacity of 1047 mA h g-1 after 300 cycles was obtained at 1 A g-1. Even after 700 cycles at 5 A g-1, the discharge specific capacity of 646 mA h g-1 was maintained, and rate capability of 610 mA h g-1 could be achieved at 10 A g-1. The high capacitive contribution could be explained by the relatively large specific surface area of porous C-MoO2/MoS2, which was mainly caused by the supported carbon network and MoS2 nanosheets, resulting in fast lithiation/delithiation processes.
RESUMO
The use of WO3 as an acid catalyst has received extensive attention in recent years. However, the correlation between the catalytic activity and the predominantly exposed surface with varied acidic sites needs further understanding. Herein, the effects of the Brønsted and Lewis acid sites of different crystal facets of WO3 on the catalytic conversion of furfuryl alcohol (FA) to ethyl levulinate (EL) in ethanol were investigated in detail. A yield of EL up to 93.3% over WO3 with the (110) facet exposed was achieved at 170 °C, while FA was mainly converted to polymers over (001) faceted nanosheets and nanobelts with exposed (002) and (100) facets. This was attributed to the different distribution of the acidic sites on different exposed crystal facets. The (110) faceted WO3 possessed abundant and strong Brønsted acid sites, which favored the conversion of FA to EL, while the (100) faceted WO3 with stronger Lewis acid sites and weaker Brønsted acid sites mainly led to the formation of polymers. In addition, the (110) faceted WO3 showed excellent sustainability in comparison with the (100) faceted counterpart.
RESUMO
The weakly coordinated anionic nitrate ligands in a centrosymmetric Ag20 cluster are replaced in a stepwise manner by chiral amino acids and two achiral luminescent sulfonic-group-containing ligands while nearly maintaining the original silver(I) cage structure. This surface engineering enables the atomically precise Ag20 clusters to exhibit the high-efficiency synergetic effects of chirality and fluorescence, producing rare circularly polarized luminescence among the metal clusters with a large dissymmetry factor of (|glum|) ≈ 5 × 10-3. This rational approach using joint functional ligands further opens a new avenue to diverse multifunctional metal clusters for promising applications.
RESUMO
Peroxidase nanoenzymes exhibit a specific affinity toward substrates, thereby demonstrating application potential for realizing the colorimetric immunoassays of hydrogen peroxide (H2O2), which can be further used as a probe for imaging cancer cells. To enhance the intrinsic peroxidase activity of molybdenum sulfide (MoS2) nanomaterials, gold (Au) nanoparticles with an average diameter of approximately 2.1 nm were modified on a MoS2/carbon surface (denoted as MoS2/C-Au600) via ascorbic acid reduction. MoS2/C-Au600 can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate a blue oxidation product in the presence of H2O2; this product exhibits peroxidase-like activities, superior to those of most existing MoS2-based nanoenzymes. Furthermore, MoS2/C-Au600 exhibits a high detection capability for H2O2 in the range of 1 × 10-5 to 2 × 10-4 mol/L (R2 = 0.99), and the lowest detection limit is 1.82 µmol/L in a sodium acetate and acetic acid buffer solution. Steady state kinetics studies indicate that the catalytic mechanism is consistent with the ping-pong mechanism. Given its strong absorption peak at 652 nm in the visible region, MoS2/C-Au600 can be used to image cancer cells due to the enhanced permeability and retention effect. Our findings demonstrate that the synergistic electronic coupling between multiple components can enhance the peroxidase activity, which can facilitate the development of an effective, facile, and reliable method to perform colorimetric immunoassays of H2O2 and cancer cells.
Assuntos
Nanopartículas Metálicas , Neoplasias , Catálise , Colorimetria , Dissulfetos , Eletrônica , Ouro , Peróxido de Hidrogênio , Imunoensaio , Limite de Detecção , Molibdênio , Peroxidase , PeroxidasesRESUMO
WO3-x was deposited on TiO2(B) nanosheets prepared using TiCl4 to form layered heterostructures via a two-step solvothermal synthesis, in which the horizontal growth of WO3-x on TiO2(B) nanosheets was carried out using WCl6 and ascorbic acid as a reducer. Optimized preparation conditions allowed WO3-x/TiO2(B) layered heterostructures to be formed. The photo- and electro-chemical properties of layered heterostructures depended strongly on the amount of WO3-x. The WO3-x/TiO2(B) heterostructures demonstrated perfect catalytic performance in full solar-spectrum light and a fast degradation effect for dye and organic colorless pollutant. All target chemicals were degraded within 10 min using WO3-x/TiO2(B) samples as a photo-catalyst in the full solar-spectrum. The photo-assisted production kinetic of Cr(VI) ions were tested. The results indicate that the reproduction rate of Cr(VI) ions using WO3-x/TiO2(B) sample is three times higher than the initial TiO2 nanosheets. The result of the photo current and Mott-Shottky curve indicates that enhanced catalysis activity is ascribed to the surface of the metastable TiO2(B) with Ti3+ defects and oxygen vacancies as active sites for photocatalytic reaction. In addition, the loading of WO3-x greatly broadened the light absorption range of TiO2(B), meaning that the product responded in the full solar spectrum.
RESUMO
On the basis of maintaining the original characteristics of each component, the composite material obtains the properties that the single component does not have through the synergy between the components. It is of great significance to understand the synergy between the components for the development of the composite. First of all, we prepared different emitting CdTe quantum dots (QDs), and then fabricated CdTe QDs@reduced graphene oxide (rGO) composites by a simple ultrasonic method. It is found that the fluorescence of QDs quenched, the photocurrent significantly improved, but the growth rate different from each other because of the different QDs. Afterwards, on the basis of naked QDs, hybrid SiO2-coated QDs were fabricated by a two-step method. After that, hybrid SiO2-coated CdTe QDs@rGO composites were prepared by the same method. It is found that the existence of the hybrid SiO2 shell leads to the decrease of photocurrent of the composites before and after coating, but the specific capacitance significantly improved, and the cycle stability also better than the naked QDs. This research will make grapheme-based composites have broad application prospects in energy storage equipment.
RESUMO
In this study, Pt-substituted polyoxometalate was first modified on the surface of commercially available TiO2, forming an efficient photocatalyst with high reactivity for hydrogen evolution. During the photocatalytic process, Pt-polyoxometalates not only increase the mobility rate of electrons but also improve the separation efficiency of photoinduced electrons and holes. After photoreduction, the in situ generated Pt0 species are anchored on the surface of polyoxometalate anion, which prevents further agglomeration. Then, the in situ formed Pt0 species and polyoxometalates synergistically promote the efficiency of photoinduced electron transfer from TiO2 to the protons adsorbed on the Pt0 surface. Although the content of Pt0 in the nanocomposite is only 0.6%, the photocatalytic hydrogen production rate reaches 5.6 mmol g-1 h-1 and remains stable at 4.5 mmol g-1 h-1 after the continuous catalytic process. Due to the modification of TiO2 by Pt-substituted polyoxometalate, this nanocomposite represents a practical model that possesses highly efficient photoelectric conversion performance. The presented work not only extends the family of new TiO2-polyoxometalate-based materials but also takes a further step toward the practical application of commercial TiO2 in photocatalytic hydrogen production.
RESUMO
An atomically-precise silver(i)-cluster-based three-dimensional (3D) framework (UJN-1) stabilized by a ditiocarb (diethyldithiocarbamate) ligand has been unveiled for the first time by self-assembly. UJN-1 is composed of both Ag9 clusters and Ag5 subunits, of which the Ag9 clusters are bonded with Ag5 subunits by sharing the ditiocarb ligand to form a microporous 3,4-connected topological framework. The chemically reduced nano-sized derivative of UJN-1 exhibits highly sensitive surface enhanced Raman scattering (SERS) towards 4-mercaptobenzoic acid (4-MBA) signal molecules, which is ascribed to the porosity as well as the distribution of abundant crystalline Ag0 active sites. This work sheds light on a new bottom-up approach to construct SERS-active silver(i)-cluster-based 3D materials by disulfur ligand stabilization.
RESUMO
Using polyhedral oligomeric silsesquioxane (POSS) modified by a thiol group as a protected ligand, atom-precise multi-heteorocluster-based dendrimers Ag12 @POSS6 (1 a and 1 b) were assembled. Through the reactive -SH groups, six POSS shell ligands stabilize the central 12-core silver(I) cluster by diverse Ag-S interactions. When such Ag12 @POSS6 complex was stimulated by different solvents (acetone or tetrahydrofuran), the core Ag12 silver(I) cluster underwent reversible structural transformation between flattened cubo-octahedral (in 1 a) and normal cubo-octahedral (in 1 b); concomitantly shell POSS clusters rearranged from pseudo-octahedral to quasi-octahedral. Furthermore, the film matrix modified by 1 a or 1 b showed different hydrophobicity.
RESUMO
Ni/NiO core-shell nanowires on nickel foam (NF) are successfully synthesized using an "acid-hungry" strategy. The 3D electrode with large accessible active sites and improved conductivity, possesses an optimized ionic and electronic transport path during electrochemical processes. High areal capacitance of 1.65 F cm-2 is obtained at an ultrahigh current density of 100 mA cm-2 , which is 19.88 times higher than pristine NF. The direct growth of nanowires makes the present supercapacitor electrode robust for long-term cycling test. By virtue of the favorable hydrogen adsorption energies on Ni0 and OHads energy on NiO or NiOOH, the 3D electrode exhibits high performance in hydrogen evolution reaction with 146 mV at η10 mA cm-2 and Tafel value of 72 mV dec-1 , and oxygen evolution reaction with 382 mV at η10 mA cm-2 and Tafel value of 103 mV dec-1 in 1 m KOH. An electrolyzer using 3D electrodes as both anode and cathode can yield a current density of 10 mA cm-2 at 1.71 V, and possesses superior long-term stability to an electrolyzer consisting of Pt/C||Ir/C. The present work develops an effective and low-cost method for the large-scale fabrication of Ni/NiO core-shell nanowires on commercial NF, providing a promising candidate for supercapacitors, fuel cells, and electrocatalysis.
RESUMO
To realize the molecular design of new functional silver(I) clusters, a new synthetic approach has been proposed, by which the weakly coordinating ligands NO3- in a Ag20 thiolate cluster precursor can be substituted by carboxylic ligands while keeping its inner core intact. By rational design, novel atom-precise carboxylic or amino acid protected 20-core Ag(I)-thiolate clusters have been demonstrated for the first time. The fluorescence and electrochemical activity of the postmodified Ag20 clusters can be modulated by alrestatin or ferrocenecarboxylic acid substitution. More strikingly, when chiral amino acids were used as postmodified ligands, CD-activity was observed for the Ag20 clusters, unveiling an efficient way to obtain atom-precise chiral silver(I) clusters.
RESUMO
A structure-determined silver nanocluster of [Ag10 (Eth)4 (CF3 COO)6 (CH3 OH)3 ]·3C-H3 OH (Eth = ethisterone) (1), is firstly demonstrated by self-assembly of silver salt and ethisterone. Due to the thiophilicity of silver(I) ions, complex 1 shows reactivity with glutathione (GSH) molecules in solution and induces the fluorescence quenching behavior. Thus, complex 1 can be used as a fluorescent sensor for GSH. In consideration of the higher level of GSH in cancerous cells, complex 1 presents significant tumor suppression reactivity toward the human hepatocellular carcinoma (HepG2) cells with IC50 value of 165 × 10-9 m. Especially, complex 1 displays 3.4-fold higher in vitro cytotoxicity to HepG2 cells than that of the normal CCC-HEL-1 cells, which makes complex 1 a potential targeting suppression agent for cancerous cells. The molecular design of complex 1 not only generates a new medicine-silver(I) cluster family, but also opens a new avenue to the targeting anticancer organosilver(I) materials.
Assuntos
Estrogênios/farmacologia , Glutationa/metabolismo , Nanopartículas/química , Prata/farmacologia , Antineoplásicos/farmacologia , Morte Celular/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Etisterona/farmacologia , Células Hep G2 , Humanos , Nanopartículas/ultraestrutura , Tamanho da Partícula , Espectrometria de FluorescênciaRESUMO
Self-assembly of metavanadate and organosilver(I) salts leads to a novel dodecahedrane-like [Ag30 ((t) BuS)20 ](10+) silver(I) thiolate nanocage that tightly wraps an unusual C2h polyoxovanadate anion. The polyoxovanadate core undergoes transformation to a D3d configuration upon acidification, and reverts back to its original C2h structure upon addition of base. Chromism was observed for the silver(I) thiolate cluster during the configurational change of the central polyoxovanadate core; the color of the solution changes reversibly from green to dark yellow. This work represents the first reported example of chromic polyoxometalate-templated silver(I) thiolate shells that respond to external acid-base stimuli. It also represents an important advance in providing crystallographic proof that structural transformations occur in a nanoscale core-shell cluster.
RESUMO
An oxidase-like mimic system based on facilely synthesized Ag@Ag3PO4 microcubes (Ag@Ag3PO4MCs) was designed and utilized to detect mercury ions with high selectivity and ultrasensitivity. Ag@Ag3PO4MCs with an average size of ca. 1.6 µm were synthesized by the reaction of [Ag(NH3)2](+) complex and Na2HPO4 and subsequent photoreduction under ultraviolet light. The as-prepared Ag@Ag3PO4MCs can effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and o-phenylenediamine (OPD) in the presence of dissolved oxygen in slightly acidic solution, exhibiting oxidase-like activities rather than peroxidase-like activity. Interestingly, the introduction of Ag nanoparticles (AgNPs) on the surfaces of Ag3PO4MCs can dramatically enhance the oxidase-like activities due to a synergistic effect between AgNPs and Ag3PO4MCs, as evidenced by the faster oxidation speed of TMB and OPD than that of native Ag3PO4MCs in the presence of dissolved oxygen. The enzyme kinetics can be well-explained by the Michaelis-Menten equation. As "poisoning" inhibitor, Hg(2+) ions can inhibit the enzyme reaction catalyzed by Ag3PO4MCs or Ag@Ag3PO4MCs. On the basis of this effect, a colorimetric Hg(2+) sensor was developed by the enzyme inhibition reaction of Ag3PO4MCs or Ag@Ag3PO4MCs. The excellent specific interaction of Hg-Ag or Hg(2+)-Ag(+) provides high selectivity for Hg(2+) over interfering metal ions. Meanwhile, the sensitivity of this sensor to Hg(2+) is extremely excellent with a limit of detection as low as 0.253 nM for Ag@Ag3PO4MCs. Considering the advantages of low detection limit, low cost, facile preparation, and visualization, the colorimetric Ag@Ag3PO4MCs sensor shows high promise for the testing of Hg(2+) in water samples.