RESUMO
Enhancing the phase transition reversibility of electrode materials is an effective strategy to alleviate capacity degradation in the cycling of lithium-ion batteries (LIBs). However, a comprehensive understanding of phase transitions under microscopic electrode dynamics is still lacking. In this paper, the activation polarization is quantified as the potential difference between the applied potential (Uabs) and the zero-charge potential (ZCP) of electrode materials. The polarization potential difference facilitates the phase transition by driving Li-ion adsorption and supplying an electron-rich environment. A novel thermodynamic phase diagram is constructed to characterize the phase transition of the example MoS2 under various Li-ion concentrations and operating voltages using the grand canonic fixed-potential method (FPM). At thermodynamic quasi-equilibrium, the ZCP is close to the Uabs, and thus is used to form the discharge curve in the phase diagram. The voltage plateau is observed within the phase transition region in the simulation, which will disappear as the phase transition reversibility is impaired. The obtained discharge curve and phase transition concentration both closely match the experimental results. Overall, the study provides a theoretical understanding of how polarization affects phase evolution in electrode dynamics, which may provide a guideline to improve battery safety and cycle life.
RESUMO
The grand canonical constant potential approach is a cornerstone for modeling the electrochemical reactions under work conditions. Here, we present a protocol for evaluating the effect of potential on electrochemical reactions using the grand canonical fixed-potential technique. We describe steps for installing PWmat software, preparing input files for the fixed-potential calculation, and simulating different electrochemical states under the same potential. We then detail procedures for analyzing the free energy evolution under the same potential. For complete details on the use and execution of this protocol, please refer to Gao et al.1,2,3.
Assuntos
Técnicas Eletroquímicas , Software , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentação , Termodinâmica , Modelos Químicos , Eletroquímica/métodosRESUMO
The reduction of CO2 into value-added chemicals and fuels has been actively studied as a promising strategy for mitigating carbon dioxide emissions. However, the dilemma for the experimentalist in choosing an appropriate reaction medium and neglecting the effect of solvent ions when using a simple thermochemical model, normally leads to the disagreement between experimental observations and theoretical calculations. In this work, by considering the effects of both the anion and cation, a more realistic CO2 reduction environment at the solid-liquid interface between copper and solvent ions has been systematically studied by using ab initio molecular dynamics and density functional theory. We revealed that the co-occurrence of alkali ions (K+) and halide ions (F-, Cl-, Br-, and I-) in the electric double layer (EDL) can enhance the adsorption of CO2 by more than 0.45 eV compared to that in pure water, and the calculated energy barrier for CO-CO coupling also decreases 0.32 eV in the presence of I ion on a negatively charged copper electrode. The hydrated ions can modulate the distribution of the charge near the solid-liquid interface, which significantly promotes CO2 reduction and meanwhile impedes the hydrogen evolution reaction. Therefore, our work unveils the significant role of halide ions at the electrode-electrolyte interface for promoting CO2 reduction on copper electrode.
RESUMO
Owing to the high economic efficiency and energy density potential, manganese-based layer-structured oxides have attracted great interests as cathode materials for potassium ion batteries. In order to alleviate the continuous phase transition and K+ re-embedding from Jahn-Teller distortion, the [Mn-Co-Mo]O6 octahedra are introduced into P3-K0.45MnO2 herein to optimize the local electron structure. Based on the experimental and computational results, the octahedral center metal molybdenum in [MoO6] octahedra proposes a smaller ionic radius and higher oxidation state to induce second-order JTE (pseudo-JTE) distortion in the adjacent [MnO6] octahedra. This distortion compresses the [MnO6] octahedra along the c-axis, leading to an increased interlayer spacing in the K+ layer. Meanwhile, the Mn3+/Mn4+ is balanced by [CoO6] octahedra and the K+ diffusion pathway is optimized as well. The proposed P3-K0.45Mn0.9Co0.05Mo0.05O2 cathode material shows an enhanced cycling stability and rate performance. It demonstrates a high capacity of 80.2 mAh g-1 at 100 mAh g-1 and 77.3 mAh g-1 at 500 mAh g-1. Furthermore, it showcases a 2000 cycles stability with a 59.6% capacity retention. This work presents a promising solution to the challenges faced by manganese-based layered oxide cathodes and offers a deep mechanism understanding and improved electrochemical performance.
RESUMO
The proton migration in the electrochemical interface is a fundamental electrochemical processes in proton involved reactions. We find fractional electron transfer, which is inversely proportional to the distance between the proton and electrode, during the proton migration under constant potential. The electrical energy carried by the transferred charge facilitates the proton to overcome the chemical barrier in the migration pathway, which is accounting for more than half electrical energy in the proton involved reactions. Consequently, less charge transfer and energy exchange take place in the reduction process. Therefore, the proton migration in the electrochemical interface is an essential component of the electrochemical reaction in terms of electron transfer and energy conversation, and are worthy of more attention in the rational design and optimization of electrochemical systems.
RESUMO
Deep-lake (reservoir) ecosystems provide valuable ecosystem services (ES) and generate significant ecosystem service values (ESV); however, reservoir ecosystems have suffered great losses from environmental changes and human activities. Currently, studies on ES and its correlations with stressors remain insufficient and the integration of ES into ecological restoration and management poses numerous challenges. Here, we combined four types of stressors with six ES closely related to human well-being to discuss their interactions in Qiandao Lake (a representative deep lake in China). Our results indicate that all ESV showed a consistent growth trend throughout the study period, reaching 5203.8 million CNY in 2018, and the cultural service value surpassed the provisioning service value for the first time in 2004. Almost all the ESV were limited during the cyanobacterial bloom in Qiandao Lake. Redundancy analysis and partial least squares structural equation modeling jointly revealed that socioeconomic development was the most important direct driver of the increase in ESV (0.770) and that hydro-meteorological conditions (0.316) and pollutant loads (0.274) positively affected ESV by mediating lake trophic status. The trophic status of the lake is the result of the interaction of multiple stressors, which has a negative impact on ESV. Therefore, to continuously protect the provisioning and cultural service values of deep-lake ecosystems from damage, the government must rationally formulate SED goals and reduce pollutant loads during lake development, operation, and utilization. This work provides valuable insights into the interactions between ES, which are closely related to human well-being, and stressors in deep-lake ecosystems.
Assuntos
Ecossistema , Poluentes Ambientais , Humanos , Lagos , China , Atividades Humanas , Conservação dos Recursos NaturaisRESUMO
Discovery of earth-abundant electrocatalysts to replace iridium for the oxygen evolution reaction (OER) in a proton exchange membrane water electrolyzer (PEMWE) represents a critical step in reducing the cost for green hydrogen production. We report a nanofibrous cobalt spinel catalyst codoped with lanthanum (La) and manganese (Mn) prepared from a zeolitic imidazolate framework embedded in electrospun polymer fiber. The catalyst demonstrated a low overpotential of 353 millivolts at 10 milliamperes per square centimeter and a low degradation for OER over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at the anode demonstrated a current density of 2000 milliamperes per square centimeter at 2.47 volts (Nafion 115 membrane) or 4000 milliamperes per square centimeter at 3.00 volts (Nafion 212 membrane) and low degradation in an accelerated stress test.
RESUMO
Free energy calculation of small molecules or ion species in aqueous solvent is one of the most important problems in electrochemistry study. Although there are many previous approaches to calculate such free energies, they are based on ab initio methods and suffer from various limitations and approximations. In the current work, we developed a hybrid approach based on ab initio molecular dynamics (AIMD) simulations to calculate the ion solvation energy. In this approach, a small water cluster surrounding the central ion is used, and implicit solvent model is applied outside the water cluster. A dynamic potential well is used during AIMD to keep the water cluster together. Quasi-harmonic approximation is used to calculate the entropy contribution, while the total energy average is used to calculate the enthalpy term. The obtained solvation voltages of the bulk metal agree with experiments within 0.3 eV, and the simulation results for the solvation energies of gaseous ions are close to the experimental observations. Besides the free energies, radial pair distribution functions and coordination numbers of hydrated cations are also obtained. The remaining challenges of this method are also discussed.
RESUMO
We report Ca2-xIrO4 nanocrystals exhibit record stability of 300 h continuous operation and high iridium mass activity (248 A gIr-1 at 1.5 VRHE) that is about 62 times that of benchmark IrO2. Lattice-resolution images and surface-sensitive spectroscopies demonstrate the Ir-rich surface layer (evolved from one-dimensional connected edge-sharing [IrO6] octahedrons) with high relative content of Ir5+ sites, which is responsible for the high activity and long-term stability. Combining operando infrared spectroscopy with X-ray absorption spectroscopy, we report the first direct observation of key intermediates absorbing at 946 cm-1 (Ir6+âO site) and absorbing at 870 cm-1 (Ir6+OO- site) on iridium-based oxides electrocatalysts, and further discover the Ir6+âO and Ir6+OO- intermediates are stable even just from 1.3 VRHE. Density functional theory calculations indicate the catalytic activity of Ca2IrO4 is enhanced remarkably after surface Ca leaching, and suggest IrOO- and IrâO intermediates can be stabilized on positive charged active sites of Ir-rich surface layer.
RESUMO
According to the WHO, the number of mental disorder patients, especially depression patients, has overgrown and become a leading contributor to the global burden of disease. With the rising of tools such as artificial intelligence, using physiological data to explore new possible physiological indicators of mental disorder and creating new applications for mental disorder diagnosis has become a new research hot topic. We present a multi-modal open dataset for mental-disorder analysis. The dataset includes EEG and recordings of spoken language data from clinically depressed patients and matching normal controls, who were carefully diagnosed and selected by professional psychiatrists in hospitals. The EEG dataset includes data collected using a traditional 128-electrodes mounted elastic cap and a wearable 3-electrode EEG collector for pervasive computing applications. The 128-electrodes EEG signals of 53 participants were recorded as both in resting state and while doing the Dot probe tasks; the 3-electrode EEG signals of 55 participants were recorded in resting-state; the audio data of 52 participants were recorded during interviewing, reading, and picture description.
Assuntos
Transtornos Mentais , Inteligência Artificial , Eletroencefalografia , Humanos , Transtornos Mentais/diagnóstico , Transtornos Mentais/fisiopatologiaRESUMO
The coastal megacity Shanghai is located in the center of the Yangtze River Delta, a dominant flame retardants (FRs) production region in China, especially for organophosphate esters (OPEs). This prompted us to investigate occurrence and seasonal changes of atmospheric OPEs in Shanghai, as well as to evaluate their sources, environmental behavior and fate as a case study for global coastal regions. Atmospheric gas and particle phase OPEs were weekly collected at two coastal sites - the emerging town Lingang New Area (LGNA), and the chemical-industry zone Jinshan Area (JSA) from July 2016-June 2017. Total atmospheric concentrations of the observed OPEs were significantly higher in JSA (median of 1800 pg m-3) than LGNA (median of 580 pg m-3). Tris(1-chloro-2-propyl) phosphate (TCPP) was the most abundant compound, and the proportion of three chlorinated OPEs were higher in the particle phase (55%) than in the gas phase (39%). The year-round median contribution of particle phase OPEs was 33%, which changed strongly with seasons, accounting for 10% in summer in contrast to 62% in winter. Gas and particle phase OPEs in JSA exhibited significant correlations with inverse of temperature, respectively, indicating the importance of local/secondary volatilization sources. The estimated fluxes of gaseous absorption were almost 2 orders of magnitude higher than those of particle phase deposition, which could act as sources of organic phosphorus to coastal and open ocean waters.
Assuntos
Monitoramento Ambiental , Retardadores de Chama , China , Ésteres , Retardadores de Chama/análise , Organofosfatos , Estações do AnoRESUMO
Oxygen evolution reaction (OER) is an obstacle to the electrocatalytic water splitting due to its unique four-proton-and-electron-transfer reaction process. Many methods, such as engineering heterostructure and introducing oxygen vacancy, have been used to improve the catalytic performance of electrocatalysts for OER. Herein, the above two kinds of regulation are simultaneously realized in a catalyst by using unique ion irradiation technology. A nanosheet structured NiO/NiFe2 O4 heterostructure with rich oxygen vacancies converted from nickel-iron layered double hydroxides by Ar+ ions irradiation shows significant enhancement in both OER and hydrogen evolution reaction performance. Density functional theory (DFT) calculations reveal that the construction of NiO/NiFe2 O4 can optimize the free energy of O* to OOH* process during OER reaction. The oxygen vacancy-rich NiO/NiFe2 O4 nanosheets have an overpotential of 279 mV at 10 mA cm-2 and a low Tafel slope of 42 mV dec-1 . Moreover, this NiO/NiFe2 O4 electrode shows an excellent long-term stability at 100 mA cm-2 for 450 h. The synergetic effects between NiO and NiFe2 O4 make NiO/NiFe2 O4 heterostructure have high conductivity and fast charge transfer, abundant active sites, and high catalytic reactivity, contributing to its excellent performance.
RESUMO
Searching for high-activity, stable and low-cost catalysts toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of significant importance to the development of renewable energy technologies. By using the computational screening method based on the density functional theory (DFT), we have systematically studied a wide range of transition metal (TM) atoms doped a defective BC3 monolayer (B atom vacancy VB and C atom vacancy VC), denoted as TM@VB and TM@VC (TM = Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ir and Pt), as efficient single atom catalysts for OER and ORR. The calculated results show that all the considered TM atoms can tightly bind with the defective BC3 monolayers to prevent the atomically dispersed atoms from clustering. The interaction strength between intermediates (HO*, O* and HOO*) and catalyst govern the catalytic activities of OER and ORR, which has a direct correlation with the d-band center (εd) of the TM active site that can be tuned by adjusting TM atoms with various d electron numbers. For TM@VB catalysts, it was found that the best catalyst for OER is Co@VB with an overpotential ηOER of 0.43 V, followed by Rh@VB (ηOER = 0.49 V), while for ORR, Rh@VB exhibits the lowest overpotential ηORR of 0.40 V, followed by Pd@VB (ηORR = 0.45 V). For TM@VC catalysts, the best catalyst for OER is Ni@VC (ηOER = 0.47 V), followed by Pt@VC (ηOER = 0.53 V), and for ORR, Pd@VC exhibits the highest activity with ηORR of 0.45 V. The results suggest that the high activity of the newly predicted well dispersed Rh@VB SAC is comparable to that of noble metal oxide benchmark catalysts for both OER and ORR. Importantly, Rh@VB may remain stable against dissolution at pH = 0 condition. The high energy barrier prevents the isolated Rh atom from clustering and ab initio molecule dynamic simulation (AIMD) result suggests that Rh@VB can remain stable under 300 K, indicating its kinetic stability. Our findings highlight a novel family of efficient and stable SAC based on carbon material, which offer a useful guideline to screen the metal active site for catalyst designation.
RESUMO
In the literature of heterogeneous water-splitting catalytic thermodynamic study, the computational hydrogen electrode (CHE) scheme is used in the majority of the cases. In this scheme, either the bare surface without O and OH decoration or a decorated phase chosen from a surface Pourbaix diagram is employed as a starting point in a four-electron reaction loop (FERL) to describe the oxygen evolution reaction (OER) process. The electrode potential that makes every step of this FERL exothermic is defined as the thermodynamic overpotential (ηtdOER) of the OER reaction and is often compared with the experimental overpotential. In this study, we point out that for complex systems where each reaction site can bind multiple species, this widely used scheme could lead to wrong ηtdOER. To yield the correct reaction path and ηtdOER, one needs to extend the CHE scheme to a full Gibbs free energy landscape scheme, where all of the intermediate states and their possible transitions are laid out and considered. The correct criterion for ηtdOER should not be "there is no trapped intermediate state (TIS) for any single FERL", rather "there is no TIS for the whole reaction landscape". Using transition metal-doped graphene-nitrogen (TMN4Gra) (TM = Fe and Co) as examples, we show that these two approaches yield different results.
RESUMO
In lithium-sulfur (Li-S) chemistry, the electrically/ionically insulating nature of sulfur and Li2S leads to sluggish electron/ion transfer kinetics for sulfur species conversion. Sulfur and Li2S are recognized as solid at room temperature, and solid-liquid phase transitions are the limiting steps in Li-S batteries. Here, we visualize the distinct sulfur growth behaviors on Al, carbon, Ni current collectors and demonstrate that (i) liquid sulfur generated on Ni provides higher reversible capacity, faster kinetics, and better cycling life compared to solid sulfur; and (ii) Ni facilitates the phase transition (e.g., Li2S decomposition). Accordingly, light-weight, 3D Ni-based current collector is designed to control the deposition and catalytic conversion of sulfur species toward high-performance Li-S batteries. This work provides insights on the critical role of the current collector in determining the physical state of sulfur and elucidates the correlation between sulfur state and battery performance, which will advance electrode designs in high-energy Li-S batteries.
RESUMO
Manipulating liquids with tunable shape and optical functionalities in real time is important for electroactive flow devices and optoelectronic devices, but remains a great challenge. Here, we demonstrate electrotunable liquid sulfur microdroplets in an electrochemical cell. We observe electrowetting and merging of sulfur droplets under different potentiostatic conditions, and successfully control these processes via selective design of sulfiphilic/sulfiphobic substrates. Moreover, we employ the electrowetting phenomena to create a microlens based on the liquid sulfur microdroplets and tune its characteristics in real time through changing the shape of the liquid microdroplets in a fast, repeatable, and controlled manner. These studies demonstrate a powerful in situ optical battery platform for unraveling the complex reaction mechanism of sulfur chemistries and for exploring the rich material properties of the liquid sulfur, which shed light on the applications of liquid sulfur droplets in devices such as microlenses, and potentially other electrotunable and optoelectronic devices.
RESUMO
Rationally designing efficient, low-cost and stable catalysts toward the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR) is of significant importance to the development of renewable energy technologies. In this work, we have systematically investigated a series of potentially efficient and stable single late transition metal atom doped phthalocyanines (TM@Pcs, TM = Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ir and Pt) as single-atom catalysts (SACs) for applications toward the OER and ORR through a computational screening approach. Our calculations indicate that TM atoms can tightly bind with Pc monolayers with high diffusion energy barriers to prevent the isolated atoms from clustering. The interaction strength between intermediates and TM@Pc governs the catalytic activities for the OER and ORR. Among all the considered TM@Pc catalysts, Ir@Pc and Rh@Pc were found to be efficient OER electrocatalysts with overpotentials η OER of 0.41 and 0.44 V, respectively, and for the ORR, Rh@Pc exhibits the lowest overpotential η ORR of 0.44 V followed by Ir@Pc (0.55 V), suggesting that Rh@Pc is an efficient bifunctional catalyst for both the OER and ORR. Moreover, it is worth noting that the Rh@Pc catalyst can remain stable against dissolution under the pH = 0 condition. Ab initio molecular dynamic calculations suggest that Rh@Pc could remain stable at 300 K. Our findings highlight a novel family of two-dimensional (2D) materials as efficient and stable SACs and offer a new strategy for catalyst design.
RESUMO
The search for high efficiency and low-cost catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is vital to overall water splitting. In this work, on the basis of first-principles calculations, we screened a series of late transition metal atoms supported on a C9N4 monolayer (TM@C9N4, where TM represents Mn, Fe, Co, Ni, Cu, Ru, Rh, Pd, Ir, and Pt) as electrocatalysts for both the HER and OER. Our results demonstrate that the TM atoms can be bonded with the nitrogen atoms around the hole to form stable structures, and the bonded TM atoms are stable against diffusion. Co@C9N4 exhibits high catalytic activity toward the HER. In particular, the N active sites in the Co@C9N4, Ni@C9N4, and Pt@C9N4 systems demonstrate relatively high performance for the HER. However, Co@C9N4 and Pt@C9N4 exhibit low OER activities with large overpotentials. Among the ten cases of TM@C9N4 considered here, only Ni@C9N4 performs as a promising bifunctional electrocatalyst with N and Ni atoms as catalytic active sites for the HER and OER, with a calculated hydrogen adsorption Gibbs free energy (ΔGH*) of -0.04 eV and an OER overpotential (ηOER) of 0.31 V. The results demonstrate that TM@C9N4 is a promising single-atom catalytic system, which can be used as the non-noble metal bifunctional electrocatalyst for overall water splitting.
RESUMO
Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN-TM, x = 1-4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of -0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the OER with a low computed overpotential of -0.39 V, which are comparable to those of noble metal catalysts, indicating superior HER and OER performance of N-Co co-doped graphenes. The results shed light on the potential applications of TM and N co-doped graphenes as efficient single-atom bifunctional catalysts for water splitting, thereby functioning as promising candidates for hydrogen/oxygen production.
RESUMO
An understanding of nanocrystal shape evolution is significant for the design, synthesis, and applications of nanocrystals with surface-enhanced properties such as catalysis or plasmonics. Surface adsorbates that are selectively attached to certain facets may strongly affect the atomic pathways of nanocrystal shape development. However, it is a great challenge to directly observe such dynamic processes in situ with a high spatial resolution. Here, we report the anomalous shape evolution of Ag2O2 nanocrystals modulated by the surface adsorbates of Ag clusters during electron beam etching, which is revealed through in situ transmission electron microscopy (TEM). In contrast to the Ag2O2 nanocrystals without adsorbates, which display the near-equilibrium shape throughout the etching process, Ag2O2 nanocrystals with Ag surface adsorbates show distinct facet development during etching by electron beam irradiation. Three stages of shape changes are observed: a sphere-to-a cube transformation, side etching of a cuboid, and bottom etching underneath the surface adsorbates. We find that the Ag adsorbates modify the Ag2O2 nanocrystal surface configuration by selectively capping the junction between two neighboring facets. They prevent the edge atoms from being etched away and block the diffusion path of surface atoms. Our findings provide critical insights into the modulatory function of surface adsorbates on the shape control of nanocrystals.