Hierarchical and reconfigurable interfibrous interface of bioinspired Bouligand structure enabled by moderate orderliness.

Introducing natural Bouligand structure into synthetics is expected to develop high-performance structural materials. Interfibrous interface is critical to load transfer, and mechanical functionality of bioinspired Bouligand structure yet receives little attention. Here, we propose one kind of hierarchical and reconfigurable interfibrous interface based on moderate orderliness to mechanically reinforce bioinspired Bouligand structure. The interface imparted by moderate alignment of adaptable networked nanofibers hierarchically includes nanofiber interlocking and hydrogen-bonding (HB) network bridging, being expected to facilitate load transfer and structural stability through dynamic adjustment in terms of nanofiber sliding and HB breaking-reforming. As one demonstration, the hierarchical and reconfigurable interfibrous interface is constructed based on moderate alignment of networked bacterial cellulose nanofibers. We show that the resultant bioinspired Bouligand structural material exhibits unusual strengthening and toughening mechanisms dominated by interface-microstructure multiscale coupling. The proposed interfibrous interface enabled by moderate orderliness would provide mechanical insight into the assembly of widely existing networked nanofiber building blocks toward high-performance macroscopic bioinspired structural assemblies.

Bioinspired polysaccharide-based nanocomposite membranes with robust wet mechanical properties for guided bone regeneration.

Polysaccharide-based membranes with excellent mechanical properties are highly desired. However, severe mechanical deterioration under wet conditions limits their biomedical applications. Here, inspired by the structural heterogeneity of strong yet hydrated biological materials, we propose a strategy based on heterogeneous crosslink-and-hydration (HCH) of a molecule/nano dual-scale network to fabricate polysaccharide-based nanocomposites with robust wet mechanical properties. The heterogeneity lies in that the crosslink-and-hydration occurs in the molecule-network while the stress-bearing nanofiber-network remains unaffected. As one demonstration, a membrane assembled by bacterial cellulose nanofiber-network and Ca2+-crosslinked and hydrated sodium alginate molecule-network is designed. Studies show that the crosslinked-and-hydrated molecule-network restricts water invasion and boosts stress transfer of the nanofiber-network by serving as interfibrous bridge. Overall, the molecule-network makes the membrane hydrated and flexible; the nanofiber-network as stress-bearing component provides strength and toughness. The HCH dual-scale network featuring a cooperative effect stimulates the design of advanced biomaterials applied under wet conditions such as guided bone regeneration membranes.

Bottom-Up Film-to-Bulk Assembly Toward Bioinspired Bulk Structural Nanocomposites.

Biological materials, although composed of meager minerals and biopolymers, often exhibit amazing mechanical properties far beyond their components due to hierarchically ordered structures. Understanding their structure-properties relationships and replicating them into artificial materials would boost the development of bulk structural nanocomposites. Layered microstructure widely exists in biological materials, serving as the fundamental structure in nanosheet-based nacres and nanofiber-based Bouligand tissues, and implying superior mechanical properties. High-efficient and scalable fabrication of bioinspired bulk structural nanocomposites with precise layered microstructure is therefore important yet remains difficult. Here, one straightforward bottom-up film-to-bulk assembly strategy is focused for fabricating bioinspired layered bulk structural nanocomposites. The bottom-up assembly strategy inherently offers a methodology for precise construction of bioinspired layered microstructure in bulk form, availability for fabrication of bioinspired bulk structural nanocomposites with large sizes and complex shapes, possibility for design of multiscale interfaces, feasibility for manipulation of diverse heterogeneities. Not limited to discussing what has been achieved by using the current bottom-up film-to-bulk assembly strategy, it is also envisioned how to promote such an assembly strategy to better benefit the development of bioinspired bulk structural nanocomposites. Compared to other assembly strategies, the highlighted strategy provides great opportunities for creating bioinspired bulk structural nanocomposites on demand.

MdBT2 regulates nitrogen-mediated cuticular wax biosynthesis via a MdMYB106-MdCER2L1 signalling pathway in apple.

Cuticular waxes play important roles in plant development and the interaction between plants and their environment. Researches on wax biosynthetic pathways have been reported in several plant species. Also, wax formation is closely related to environmental condition. However, the regulatory mechanism between wax and environmental factors, especially essential mineral elements, is less studied. Here we found that nitrogen (N) played a negative role in the regulation of wax synthesis in apple. We therefore analysed wax content, composition and crystals in BTB-TAZ domain protein 2 (MdBT2) overexpressing and antisense transgenic apple seedlings and found that MdBT2 could downregulate wax biosynthesis. Furthermore, R2R3-MYB transcription factor 16-like protein (MdMYB106) interacted with MdBT2, and MdBT2 mediated its ubiquitination and degradation through the 26S proteasome pathway. Finally, HXXXD-type acyl-transferase ECERIFERUM 2-like1 (MdCER2L1) was confirmed as a downstream target gene of MdMYB106. Our findings reveal an N-mediated apple wax biosynthesis pathway and lay a foundation for further study of the environmental factors associated with wax regulatory networks in apple.

Sr-induced Fermi Engineering of ß-FeOOH for Multifunctional Catalysis.

Designing a multifunctional electrocatalyst to produce H2 from water, urea, urine, and wastewater, is highly desirable yet challenging because it demands precise Fermi-engineering to realize stronger π-donation from O 2p to electron(e- )-deficient metal (t2g ) d-orbitals. Here a Sr-induced phase transformed ß-FeOOH/α-Ni(OH)2 catalyst anchored on Ni-foam (designated as pt-NFS) is introduced, where Sr produces plenteous Fe4+ (Fe3+ → Fe4+ ) to modulate Fermi level and e- -transfer from e- -rich Ni3+ (t2g )-orbitals to e- -deficient Fe4+ (t2g )-orbitals, via strong π-donation from the π-symmetry lone-pair of O bridge. pt-NFS utilizes Fe-sites near the Sr-atom to break the H─O─H bonds and weakens the adsorption of *O while strengthening that of *OOH, toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Invaluably, Fe-sites of pt-NFS activate H2 -production from urea oxidation reaction (UOR) through a one-stage pathway which, unlike conventional two-stage pathways with two NH3 -molecules, involves only one NH3 -molecule. Owing to more suitable kinetic energetics, pt-NFS requires 133 mV (negative potential shift), 193 mV, ≈1.352 V, and ≈1.375 V versus RHE for HER, OER, UOR, and human urine oxidation, respectively, to reach the benchmark 10 mA cm-2 and also demonstrates remarkable durability of over 25 h. This work opens a new corridor to design multifunctional electrocatalysts with precise Fermi engineering through d-band modulation.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices.

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

Designing nanohesives for rapid, universal, and robust hydrogel adhesion.

Nanoparticles-based glues have recently been shown with substantial potential for hydrogel adhesion. Nevertheless, the transformative advance in hydrogel-based application places great challenges on the rapidity, robustness, and universality of achieving hydrogel adhesion, which are rarely accommodated by existing nanoparticles-based glues. Herein, we design a type of nanohesives based on the modulation of hydrogel mechanics and the surface chemical activation of nanoparticles. The nanohesives can form robust hydrogel adhesion in seconds, to the surface of arbitrary engineering solids and biological tissues without any surface pre-treatments. A representative application of hydrogel machine demonstrates the tough and compliant adhesion between dynamic tissues and sensors via nanohesives, guaranteeing accurate and stable blood flow monitoring in vivo. Combined with their biocompatibility and inherent antimicrobial properties, the nanohesives provide a promising strategy in the field of hydrogel based engineering.

Tongxinluo promotes endothelium-dependent arteriogenesis to attenuate diabetic peripheral arterial disease.

BACKGROUND: Peripheral arterial disease (PAD) has become one of the leading causes of disa-bility and death in diabetic patients. Restoring blood supply to the hindlimbs, especially by promoting arteriogenesis, is currently the most effective strategy, in which endothelial cells play an important role. Tongxinluo (TXL) has been widely used for the treatment of cardio-cerebrovascular diseases and extended for diabetes-related vascular disease. AIM: To investigate the effect of TXL on diabetic PAD and its underlying mechanisms. METHODS: An animal model of diabetic PAD was established by ligating the femoral artery of db/db mice. Laser Doppler imaging and micro-computed tomography (micro-CT) were performed to assess the recovery of blood flow and arteriogenesis. Endothelial cell function related to arteriogenesis and cellular pyroptosis was assessed using histopathology, Western blot analysis, enzyme-linked immuno-sorbent assay and real-time polymerase chain reaction assays. In vitro, human vascular endothelial cells (HUVECs) and human vascular smooth muscle cells (VSMCs) were pretreated with TXL for 4 h, followed by incubation in high glucose and hypoxia conditions to induce cell injury. Then, indicators of HUVEC pyroptosis and function, HUVEC-VSMC interactions and the migration of VSMCs were measured. RESULTS: Laser Doppler imaging and micro-CT showed that TXL restored blood flow to the hindlimbs and enhanced arteriogenesis. TXL also inhibited endothelial cell pyroptosis via the reactive oxygen species/nucleotide-binding oligomerization domain-like receptor family pyrin domain-containing 3/Caspase-1/GSDMD signaling pathway. In addition, TXL restored endothelial cell functions, including maintaining the balance of vasodilation, acting as a barrier to reduce inflammation, and enhancing endothelial-smooth muscle cell interactions through the Jagged-1/Notch-1/ephrin-B2 signaling pathway. Similar results were observed in vitro. CONCLUSION: TXL has a pro-arteriogenic effect in the treatment of diabetic PAD, and the mechanism may be related to the inhibition of endothelial cell pyroptosis, restoration of endothelial cell function and promotion of endothelial cell-smooth muscle cell interactions.

Biomimetic Gradient Bouligand Structure Enhances Impact Resistance of Ceramic-Polymer Composites.

Biological materials relied on multiple synergistic structural design elements typically exhibit excellent comprehensive mechanical properties. Hierarchical incorporation of different biostructural elements into a single artificial material is a promising approach to enhance mechanical properties, but remains challenging. Herein, a biomimetic structural design strategy is proposed by coupling gradient structure with twisted plywood Bouligand structure, attempting to improve the impact resistance of ceramic-polymer composites. Via robocasting and sintering, kaolin ceramic filaments reinforced by coaxially aligned alumina nanoplatelets are arranged into Bouligand structure with a gradual transition in filament spacing along the thickness direction. After the following polymer infiltration, biomimetic ceramic-polymer composites with a gradient Bouligand (GB) structure are eventually fabricated. Experimental investigations reveal that the incorporation of gradient structure into Bouligand structure improves both the peak force and total energy absorption of the obtained ceramic-polymer composites. Computational modeling further suggests the substantial improvement in impact resistance by adopting GB structure, and clarifies the underlying deformation behavior of the biomimetic GB structured composites under impact. This biomimetic design strategy may provide valuable insights for developing lightweight and impact-resistant structural materials in the future.

Protective Effects and Potential Mechanism of Tongxinluo on Mice with Thromboangiitis Obliterans Induced by Sodium Laurate.

OBJECTIVE: To investigate the effects of Tongxinluo (TXL) on thromboangiitis obliterans (TAO) and the underlying mechanisms. METHODS: Ninety male C57/BL6J mice were randomly divided into 6 groups according to a random number table: the sham group, TAO model group, Compound Danshen Tablet (CDT) group, and the high-, medium-, and low-dose TXL groups. All mice except the sham group were injected with sodium laurate (0.1 mL, 5 mg/mL) in the femoral artery to establish TAO mouse model. After modeling, mice in the sham and TAO model groups were intragastrically administered 0.5% (w/v) sodium carboxymethylcellulose, mice in the CDT group were intragastrically administered 0.52 g/kg CDT, and mice in the TXL-H, TXL-M, and TXL-L groups were intragastrically administered 1.5, 0.75, and 0.38 g/kg TXL, respectively. After 4 weeks of gavage, the recovery of blood flow in the lower limbs of mice was detected by Laser Doppler Imaging. The pathological changes and thrombosis of the femoral artery were observed by morphological examination. The expressions of tumor necrosis factor α (TNF-α) and inducible nitric oxide synthase (iNOS) in the femoral artery wall were detected by HE staining. Levels of thromboxane B2 (TXB2), 6-keto-prostaglandin F1α (6-keto-PGF1α), endothelin-1 (ET-1), interleukin (IL)-1ß and IL-6 were measured using enzyme-linked immunosorbent assay (ELISA). Levels of activated partial thromboplastin time (APTT), prothrombin time (PT), thrombin time (TT) and fibrinogen (FIB) were detected by a fully automated biochemical analyzer. RESULTS: TXL promoted the restoration of blood flow in the lower limbs, reduced the area of thrombosis in the femoral artery, and alleviated the pathological changes in the femoral artery wall. Moreover, the levels of TXB2, ET-1, IL-6, IL-1ß, TNF-α and iNOS were significantly lower in the TXL groups compared with the model group (P<0.05 or P<0.01), while the level of 6-keto-PGF1α was significantly higher (P<0.01). In addition, APTT, PT, and TT were significantly prolonged in TXL groups compared with the model group (P<0.05 or P<0.01), and FIB levels were significantly decreased compared with the model group (P<0.01). CONCLUSIONS: TXL had a protective effect on TAO mice, and the mechanism may involve inhibition of thrombosis and inflammatory responses. TXL may be a potential drug for the treatment of TAO.

Mechanically robust bamboo node and its hierarchically fibrous structural design.

Although short bamboo nodes function in mechanical support and fluid exchange for bamboo survival, their structures are not fully understood compared to unidirectional fibrous internodes. Here, we identify the spatial heterostructure of the bamboo node via multiscale imaging strategies and investigate its mechanical properties by multimodal mechanical tests. We find three kinds of hierarchical fiber reinforcement schemes that originate from the bamboo node, including spatially tightened interlocking, triaxial interconnected scaffolding and isotropic intertwining. These reinforcement schemes, built on porous vascular bundles, microfibers and more-refined twist-aligned nanofibers, govern the structural stability of the bamboo via hierarchical toughening. In addition, the spatial liquid transport associated with these multiscale fibers within the bamboo node is experimentally verified, which gives perceptible evidence for life-indispensable multidirectional fluid exchange. The functional integration of mechanical reinforcement and liquid transport reflects the fact that the bamboo node has opted for elaborate structural optimization rather than ingredient richness. This study will advance our understanding of biological materials and provide insight into the design of fiber-reinforced structures and biomass utilization.

Scalable Manufacturing of Mechanical Robust Bioinspired Ceramic-Resin Composites with Locally Tunable Heterogeneous Structures.

Lightweight structural materials with a unique combination of high stiffness, strength, toughness, and hardness, are highly desired yet challenging to be artificially fabricated. Biological structural materials, on the other hand, ingeniously integrate multiple mutually exclusive mechanical properties together relying on their hierarchically heterogeneous structures bonded with gradient interfaces. Here, a scalable bottom-up approach combining continuous nanofiber-assisted evaporation-induced self-assembly with laminating, pressure-less sintering and resin infiltration is reported to fabricate bioinspired heterogeneous ceramic-resin composites with locally tunable microstructure to fulfill specific properties. A gradient interlayer is introduced to provide a gradual transition between adjacent heterogeneous layers, effectively alleviating their property mismatch. The optimized heterogeneous nacre-like composite, as a demonstration, exhibits an attractive combination of low density (≈2.8 g cm-3 ), high strength (≈292 MPa), toughness (≈6.4 MPa m1/2 ), surface hardness (≈1144 kgf mm-2 ) and impact-resistance, surpassing the overall performance of engineering alumina. This material-independent approach paves the way for designing advanced bioinspired heterogeneous materials for diverse structural and functional applications.

Controlled Desiccation of Preprinted Hydrogel Scaffolds Toward Complex 3D Microarchitectures.

Additive manufacturing (AM) is the key to creating a wide variety of 3D structures with unique and programmable functionalities. Direct ink writing is one of the widely used AM technologies with numerous printable materials. However, the extrude-based method is limited by low fabrication resolution, which is confined to printing macrostructures. Herein, a new AM strategy is reported, using a low-cost extrusion 3D printer, to create 3D microarchitectures at the macroscopic level through controlled desiccation of preprinted hydrogel scaffolds followed by infilling objective components. A printable hydrogel with a high-water content ensures maximum shrinkage (≈99.5% in volume) of the printed scaffolds to achieve high resolution. Stable covalent cross-linking and a suitable drying rate enable uniform shrinkage of the scaffolds to retain their original architectures. Particularly, this method can be adapted to produce liquid-metal-based 3D circuits and nanocomposite-based microrobots, indicating its capability to fabricate functional and complex 3D architectures with micron-level resolution from different material systems.

Bioinspired Impact-Resistant and Self-Monitoring Nanofibrous Composites.

Lightweight and impact-resistant materials with self-monitoring capability are highly desired for protective applications, but are challenging to be artificially fabricated. Herein, a scalable-manufactured aramid nanofiber (ANF)-based composite combining these key properties is presented. Inspired by the strengthening and toughening mechanisms relying on recoverable interfaces commonly existing in biological composites, mechanically weak but dense hydrogen bonds are introduced into the ANF interfaces to achieve simultaneously enhanced tensile strength (300 MPa), toughness (55 MJ m-3 ), and impact resistance of the nanofibrous composite. The achieved mechanical property combination displays attractive advantages compared with that of most of previously reported nanocomposites. Additionally, the nanofibrous composite is designed with a capability for real-time self-monitoring of its structural safety during both quasi-static tensile and dynamic impact processes, based on the strain/damage-induced resistance variations of a conductive nanowire network inside it. These comprehensive properties enable the present nanofibrous composite with promising potential for protective applications.

Large-Scale Production of Rectorite Nanosheets and Their Co-Assembly with Aramid Nanofibers for High-Performance Electrical Insulating Nanopapers.

Compared with raw rectorite microplatelets (RMs), rectorite nanosheets (RNs) have considerably greater application prospects in the preparation of advanced composite materials because of their larger aspect ratio, higher surface reactivity, and intrinsically superior mechanical and physical properties. However, the difficulty in the efficient preparation of RNs significantly limits their large-scale applications. Here, a scalable poly(vinylpyrrolidone)-assisted stirring approach is developed to prepare ultrathin RNs from the abundant natural RMs. A higher production rate (≈0.675 g h-1 ) is achieved compared with that of most other nanosheets. Additionally, instead of using conventional time- and energy-consuming high-speed centrifugation, an efficient poly(dienedimethylammonium chloride)-assisted sedimentation strategy is proposed here to rapidly separate the exfoliated RNs from the RN dispersion. Then, the RNs are co-assembled with aramid nanofibers (ANFs) into large-scale nacre-mimetic ANF-RN nanopapers with considerably enhanced mechanical, electrical insulating, and high-temperature-resistant properties compared with pure ANF nanopapers and ANF-RM micropapers. Moreover, these properties are superior to those of previously reported ANF-based nanopapers and commercial insulating micropapers.

An apple long-chain acyl-CoA synthase, MdLACS1, enhances biotic and abiotic stress resistance in plants.

Epidermal waxes are part of the outermost hydrophobic structures of apples and play a significant role in enhancing apple resistance and improving fruit quality. The biosynthetic precursors of epidermal waxes are very long-chain fatty acids (VLCFAs), which are made into different wax components through various wax synthesis pathways. In Arabidopsis thaliana, the AtLACS1 protein can activate the alkane synthesis pathway to produce very long-chain acyl CoAs (VLC-acyl-CoAs), which provide substrates for wax synthesis, from VLCFAs. The apple protein MdLACS1, encoded by the MdLACS1 gene, belongs to the AMP-binding superfamily and has long-chain acyl coenzyme A synthase activity, but its function in apple remains unclear. Here, we identified MdLACS1 in apple (Malus × domestica) and analyzed its function. Our results suggest that MdLACS1 promotes wax synthesis and improves biotic and abiotic stress tolerance, which were directly or indirectly dependent on wax. Our study further refines the molecular mechanism of wax biosynthesis in apples and elucidates the physiological function of wax in resistance to external stresses. These findings provide candidate genes for the synergistic enhancement of apple fruit quality and stress tolerance.

Highly hydrated paramagnetic amorphous calcium carbonate nanoclusters as an MRI contrast agent.

Amorphous calcium carbonate plays a key role as transient precursor in the early stages of biogenic calcium carbonate formation in nature. However, due to its instability in aqueous solution, there is still rare success to utilize amorphous calcium carbonate in biomedicine. Here, we report the mutual effect between paramagnetic gadolinium ions and amorphous calcium carbonate, resulting in ultrafine paramagnetic amorphous carbonate nanoclusters in the presence of both gadolinium occluded highly hydrated carbonate-like environment and poly(acrylic acid). Gadolinium is confirmed to enhance the water content in amorphous calcium carbonate, and the high water content of amorphous carbonate nanoclusters contributes to the much enhanced magnetic resonance imaging contrast efficiency compared with commercially available gadolinium-based contrast agents. Furthermore, the enhanced T1 weighted magnetic resonance imaging performance and biocompatibility of amorphous carbonate nanoclusters are further evaluated in various animals including rat, rabbit and beagle dog, in combination with promising safety in vivo. Overall, exceptionally facile mass-productive amorphous carbonate nanoclusters exhibit superb imaging performance and impressive stability, which provides a promising strategy to design magnetic resonance contrast agent.

The transcription factor MdMYB2 influences cold tolerance and anthocyanin accumulation by activating SUMO E3 ligase MdSIZ1 in apple.

Conjugation of the small ubiquitin-like modifier (SUMO) peptide to target proteins is an important post-translational modification. SAP AND MIZ1 DOMAIN-CONTAINING LIGASE1 (MdSIZ1) is an apple (Malus domestica Borkh). SUMO E3 ligase that mediates sumoylation of its targets during plant growth and development under adverse environmental conditions. However, it is unclear how MdSIZ1 senses the various environmental signals and whether sumoylation is regulated at the transcriptional level. In this study, we analyzed the MdSIZ1 promoter and found that it contained an MYB binding site (MBS) motif that was essential for the response of MdSIZ1 to low temperature (LT) and drought. Subsequently, we used yeast one-hybridization screening to demonstrate that a MYB transcription factor, MdMYB2, directly bound to the MBS motif in the MdSIZ1 promoter. Phenotypic characterization of MdMYB2 and MdSIZ1 suggested that the expression of both MdMYB2 and MdSIZ1 substantially improved cold tolerance in plants. MdMYB2 was induced by LT and further activated the expression of MdSIZ1, thereby promoting the sumoylation of MdMYB1, a key regulator of anthocyanin biosynthesis in apple. MdMYB2 promoted anthocyanin accumulation in apple fruits, apple calli, and Arabidopsis (Arabidopsis thaliana) in an MdSIZ1-dependent manner. In addition, the interaction of MdMYB2 and the MdSIZ1 promoter substantially improved plant tolerance to cold stress. Taken together, our findings reveal an important role for transcriptional regulation of sumoylation and provide insights into plant anthocyanin biosynthesis regulation mechanisms and stress response.

Anti-Swelling, Robust, and Adhesive Extracellular Matrix-Mimicking Hydrogel Used as Intraoral Dressing.

Due to the wet and dynamic environment of the oral cavity, the healing of intraoral wounds, such as tooth extraction wounds, requires stable and firm wound dressings. In clinical practice, cotton balls and gauzes, sponge plugs, or sutures are used to treat extraction wounds, but none of these means can continuously isolate the wound from the intraoral environment and facilitate ideal healing conditions. Herein, inspired by the natural extracellular matrix, a family of wound dressings is developed for intraoral wound repair. Infiltrating a ductile long-chain hydrogel network into a prefabricated, sturdy macromolecular meshwork and in situ crosslinking endowed the composite hydrogel with controllable swelling behaviors and robust mechanical properties. The macromolecular meshwork functioned as the backbone to support the composite and restricts the swelling of the long-chain hydrogel network. In vitro tests verified that this wound dressing can provide durable protection for intraoral wounds against complex irritations. Furthermore, accelerated wound healing occurred when the wound dressing is applied in vivo on a canine tooth extraction model, due to the effective reduction of acute inflammation. These results suggest that this family of bioinspired hydrogels has great potential for application as intraoral wound dressing.

Jinlida granules ameliorate the high-fat-diet induced liver injury in mice by antagonising hepatocytes pyroptosis.

CONTEXT: Jinlida (JLD) as a traditional Chinese medicine formula has been used to treat type 2 diabetes mellitus (T2DM) and studies have shown its anti-obesity effect. OBJECTIVE: To investigate the therapeutic effects of JLD in a mouse model of non-alcoholic fatty liver (NAFL). MATERIALS AND METHODS: C57BL/6J mice were divided into three groups and fed a low-diet diet (LFD), high-fat diet (HFD), or HFD + JLD (3.8 g/kg) for 16 weeks, respectively. The free fatty acids-induced lipotoxicity in HepG2 cells were used to evaluate the anti-pyroptotic effects of JLD. The pharmacological effects of JLD on NAFL were investigated by pathological examination, intraperitoneal glucose and insulin tolerance tests, western blotting, and quantitative real-time PCR. RESULTS: In vivo studies showed that JLD ameliorated HFD-induced liver injury, significantly decreased body weight and enhanced insulin sensitivity and improved glucose tolerance. Furthermore, JLD suppressed both the mRNA expression of caspase-1 (1.58 vs. 2.90), IL-1ß (0.93 vs. 3.44) and IL-18 (1.34 vs. 1.60) and protein expression of NLRP3 (2.04 vs. 5.71), pro-caspase-1 (2.68 vs. 4.92) and IL-1ß (1.61 vs. 2.60). In vitro, JLD inhibited the formation of lipid droplets induced by 2 mM FFA (IC50 = 2.727 mM), reduced the protein expression of NLRP3 (0.74 vs. 2.27), caspase-1 (0.57 vs. 2.68), p20 (1.67 vs. 3.33), and IL-1ß (1.44 vs. 2.41), and lowered the ratio of p-IKB-α/IKB-α (0.47 vs. 2.19). CONCLUSION: JLD has a protective effect against NAFLD, which may be related to its anti-pyroptosis, suggesting that JLD has the potential as a novel agent in the treatment of NAFLD.