Self-probed ptychography from semiconductor high-harmonic generation.

We demonstrate a method to image an object using a self-probing approach based on semiconductor high-harmonic generation. On the one hand, ptychography enables high-resolution imaging from the coherent light diffracted by an object. On the other hand, high-harmonic generation from crystals is emerging as a new source of extreme-ultraviolet ultrafast coherent light. We combine these two techniques by performing ptychography measurements with nanopatterned crystals serving as the object as well as the generation medium of the harmonics. We demonstrate that this strong field in situ approach can provide structural information about an object. With the future developments of crystal high harmonics as a compact short-wavelength light source, our demonstration can be an innovative approach for nanoscale imaging of photonic and electronic devices in research and industry.

Author Correction: All semiconductor enhanced high-harmonic generation from a single nanostructured cone.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

All semiconductor enhanced high-harmonic generation from a single nanostructured cone.

The enhancement and control of non-linear phenomena at a nanometer scale has a wide range of applications in science and in industry. Among these phenomena, high-harmonic generation in solids is a recent focus of research to realize next generation petahertz optoelectronic devices or compact all solid state EUV sources. Here, we report on the realization of the first nanoscale high harmonic source. The strong field regime is reached by confining the electric field from a few nanojoules femtosecond laser in a single 3D semiconductor waveguide. We reveal a strong competition between enhancement of coherent harmonics and incoherent fluorescence favored by excitonic processes. However, far from the band edge, clear enhancement of the harmonic emission is reported with a robust sustainability offering a compact nanosource for applications. We illustrate the potential of our harmonic nano-device by performing a coherent diffractive imaging experiment. Ultra-compact UV/X-ray nanoprobes are foreseen to have other applications such as petahertz electronics, nano-tomography or nano-medicine.

Orbital angular momentum from semiconductor high-order harmonics.

Light beams carrying orbital angular momentum (OAM) have led to stunning applications in various fields from quantum information to microscopy. We examine OAM from the recently observed high-harmonic generation (HHG) in semiconductor crystals. HHG from solids could be a valuable approach for integrated high-flux short-wavelength coherent light sources. First, we verify the transfer and conservation of the OAM in the strong-field regime of interaction from the generation laser to the harmonics. Secondly, we create OAM beams by etching a spiral zone structure directly at the surface of a zinc oxide crystal. Such diffractive optics act on the generated harmonics and produces focused optical vortices with sub-micrometric size.

Inner cladding microstructuration based on symmetry reduction for improvement of singlemode robustness in VLMA fiber.

Very large mode area, active optical fibers with a low high order mode content in the actively doped core region were designed by removing the inner cladding symmetry. The relevance of the numerical approach is demonstrated here by the investigation of a standard air-silica Large Pitch Fiber, used as a reference. A detailed study of all-solid structures is also performed. Finally, we propose new kinds of geometry for 50 µm core, all-solid microstructured fibers enabling a robust singlemode laser emission from 400 nm to 2200 nm.

Very-large-mode-area photonic bandgap Bragg fiber polarizing in a wide spectral range.

A design of a polarizing all-glass Bragg fiber with a microstructure core has been proposed for the first time. This design provides suppression of high-order modes and of one of the polarization states of the fundamental mode. The polarizing fiber was fabricated by a new, simple method based on a combination of the modified chemical vapor deposition (MCVD) process and the rod-in-tube technique. The mode field area has been found to be about 870 µm² near λ=1064 nm. The polarization extinction ratio better than 13 dB has been observed over a 33% wavelength range (from 1 to 1.4 µm) after propagation in a 1.7 m fiber piece bent to a radius of 70 cm.

130 mW average power, 4.6 nJ pulse energy, 10.2 ps pulse duration from an Er3+ fiber oscillator passively mode locked by a resonant saturable absorber mirror.

An Er(3+) fiber laser passively mode locked by a resonant saturable absorber mirror achieves more than 130 mW average power at 1560 nm from a Fabry-Perot cavity. The pulsed regime is self-starting from the CW regime without any Q-switch transition. The output pulse has a duration of 10.2 ps and can be extracavity dechirped with 42% efficiency down to 614 fs, which represents 1.2 times the Fourier limit imposed by the spectrum. To date, this corresponds to the highest averaged power directly extracted at such a wavelength from a fiber laser mode locked with a saturable absorber mirror.

Polarization-maintaining photonic bandgap Bragg fiber.

The possibility of fabricating a polarization-maintaining Bragg fiber has been studied. It is shown that violation of the cylindrical symmetry of a Bragg mirror in most cases results in a sharp increase in optical loss, which is caused by resonance transmission through the Bragg mirror at wavelengths near the cutoffs of the modes of the high-index rings with a nonzero azimuthal index. It is shown that placing stress-applied parts or air holes inside the Bragg fiber core allows one to avoid this effect. A polarization-maintaining Bragg fiber with perfect light confinement in the core is demonstrated for the first time to our knowledge.

High-power photonic-bandgap fiber laser.

An original architecture of an active fiber allowing a nearly diffraction-limited beam to be produced is demonstrated. The active medium is a double-clad large-mode-area photonic-bandgap fiber consisting of a 10,000 ppm by weight Yb(3+)-doped core surrounded by an alternation of high- and low-index layers constituting a cylindrical photonic crystal. The periodic cladding allows the robust propagation of a approximately 200 microm(2) fundamental mode and efficiently discriminates against the high-order modes. The M(2) parameter was measured to be 1.17. A high-power cw laser was built exhibiting 80% slope efficiency above threshold. The robust propagation allows the fiber to be tightly bent. Weak incidence on the slope efficiency was observed with wounding radii as small as 6 cm.