Evaluation of Chemical and Physical Triggers for Enhanced Photosynthetic Glycerol Production in Different Dunaliella Isolates.

The salt-tolerant marine microalgae Dunaliella tertiolecta is reported to generate significant amounts of intracellular glycerol as an osmoprotectant under high salt conditions. This study highlights the phylogenetic distribution and comparative glycerol biosynthesis of seven new Dunaliella isolates compared to a D. tertiolecta reference strain. Phylogenetic analysis indicates that all Dunaliella isolates are newly discovered and do not relate to the D. tertiolecta reference. Several studies have identified light color and intensity and salt concentration alone as the most inducing factors impacting glycerol productivity. This study aims to optimize glycerol production by investigating these described factors singularly and in combination to improve the glycerol product titer. Glycerol production data indicate that cultivation with white light of an intensity between 500 and 2000 µmol m-2 s-1 as opposed to 100 µmol m-2 s-1 achieves higher biomass and thereby higher glycerol titers for all our tested Dunaliella strains. Moreover, applying higher light intensity in a cultivation of 1.5 M NaCl and an increase to 3 M NaCl resulted in hyperosmotic stress conditions, providing the highest glycerol titer. Under these optimal light intensity and salt conditions, the glycerol titer of D. tertiolecta could be doubled to 0.79 mg mL-1 in comparison to 100 µmol m-2 s-1 and salt stress to 2 M NaCl, and was higher compared to singularly optimized conditions. Furthermore, under the same conditions, glycerol extracts from new Dunaliella isolates did provide up to 0.94 mg mL-1. This highly pure algae-glycerol obtained under optimal production conditions can find widespread applications, e.g., in the pharmaceutical industry or the production of sustainable carbon fibers.

The Time-Resolved Salt Stress Response of Dunaliella tertiolecta-A Comprehensive System Biology Perspective.

Algae-driven processes, such as direct CO2 fixation into glycerol, provide new routes for sustainable chemical production in synergy with greenhouse gas mitigation. The marine microalgae Dunaliella tertiolecta is reported to accumulate high amounts of intracellular glycerol upon exposure to high salt concentrations. We have conducted a comprehensive, time-resolved systems biology study to decipher the metabolic response of D. tertiolecta up to 24 h under continuous light conditions. Initially, due to a lack of reference sequences required for MS/MS-based protein identification, a high-quality draft genome of D. tertiolecta was generated. Subsequently, a database was designed by combining the genome with transcriptome data obtained before and after salt stress. This database allowed for detection of differentially expressed proteins and identification of phosphorylated proteins, which are involved in the short- and long-term adaptation to salt stress, respectively. Specifically, in the rapid salt adaptation response, proteins linked to the Ca2+ signaling pathway and ion channel proteins were significantly increased. While phosphorylation is key in maintaining ion homeostasis during the rapid adaptation to salt stress, phosphofructokinase is required for long-term adaption. Lacking ß-carotene, synthesis under salt stress conditions might be substituted by the redox-sensitive protein CP12. Furthermore, salt stress induces upregulation of Calvin-Benson cycle-related proteins.

Proteomic and Transcriptomic Analyses to Decipher the Chitinolytic Response of Jeongeupia spp.

In nature, chitin, the most abundant marine biopolymer, does not accumulate due to the action of chitinolytic organisms, whose saccharification systems provide instructional blueprints for effective chitin conversion. Therefore, discovery and deconstruction of chitinolytic machineries and associated enzyme systems are essential for the advancement of biotechnological chitin valorization. Through combined investigation of the chitin-induced secretome with differential proteomic and transcriptomic analyses, a holistic system biology approach has been applied to unravel the chitin response mechanisms in the Gram-negative Jeongeupia wiesaeckerbachi. Hereby, the majority of the genome-encoded chitinolytic machinery, consisting of various glycoside hydrolases and a lytic polysaccharide monooxygenase, could be detected extracellularly. Intracellular proteomics revealed a distinct translation pattern with significant upregulation of glucosamine transport, metabolism, and chemotaxis-associated proteins. While the differential transcriptomic results suggested the overall recruitment of more genes during chitin metabolism compared to that of glucose, the detected protein-mRNA correlation was low. As one of the first studies of its kind, the involvement of over 350 unique enzymes and 570 unique genes in the catabolic chitin response of a Gram-negative bacterium could be identified through a three-way systems biology approach. Based on the cumulative data, a holistic model for the chitinolytic machinery of Jeongeupia spp. is proposed.

Isolation, biochemical characterization, and genome sequencing of two high-quality genomes of a novel chitinolytic Jeongeupia species.

Chitin is the second most abundant polysaccharide worldwide as part of arthropods' exoskeletons and fungal cell walls. Low concentrations in soils and sediments indicate rapid decomposition through chitinolytic organisms in terrestrial and aquatic ecosystems. The enacting enzymes, so-called chitinases, and their products, chitooligosaccharides, exhibit promising characteristics with applications ranging from crop protection to cosmetics, medical, textile, and wastewater industries. Exploring novel chitinolytic organisms is crucial to expand the enzymatical toolkit for biotechnological chitin utilization and to deepen our understanding of diverse catalytic mechanisms. In this study, we present two long-read sequencing-based genomes of highly similar Jeongeupia species, which have been screened, isolated, and biochemically characterized from chitin-amended soil samples. Through metabolic characterization, whole-genome alignments, and phylogenetic analysis, we could demonstrate how the investigated strains differ from the taxonomically closest strain Jeongeupia naejangsanensis BIO-TAS4-2T (DSM 24253). In silico analysis and sequence alignment revealed a multitude of highly conserved chitinolytic enzymes in the investigated Jeongeupia genomes. Based on these results, we suggest that the two strains represent a novel species within the genus of Jeongeupia, which may be useful for environmentally friendly N-acetylglucosamine production from crustacean shell or fungal biomass waste or as a crop protection agent.

Efficient Green Light Acclimation of the Green Algae Picochlorum sp. Triggering Geranylgeranylated Chlorophylls.

In analogy to higher plants, eukaryotic microalgae are thought to be incapable of utilizing green light for growth, due to the "green gap" in the absorbance profiles of their photosynthetic pigments. This study demonstrates, that the marine chlorophyte Picochlorum sp. is able to grow efficiently under green light emitting diode (LED) illumination. Picochlorum sp. growth and pigment profiles under blue, red, green and white LED illumination (light intensity: 50-200 µmol m-2 s-1) in bottom-lightened shake flask cultures were evaluated. Green light-treated cultures showed a prolonged initial growth lag phase of one to 2 days, which was subsequently compensated to obtain comparable biomass yields to red and white light controls (approx. 0.8 gDW L-1). Interestingly, growth and final biomass yields of the green light-treated sample were higher than under blue light with equivalent illumination energies. Further, pigment analysis indicated, that during green light illumination, Picochlorum sp. formed unknown pigments (X1-X4). Pigment concentrations increased with illumination intensity and were most abundant during the exponential growth phase. Mass spectrometry and nuclear magnetic resonance data indicated, that pigments X1-X2 and X3-X4 are derivatives of chlorophyll b and a, which harbor C=C bonds in the phytol side chain similar to geranylgeranylated chlorophylls. Thus, for the first time, the natural accumulation of large pools (approx. 12 mg gDW -1) of chlorophyll intermediates with incomplete hydrogenation of their phytyl chains is demonstrated for algae under monochromatic green light (Peak λ 510 nm, full width at half maximum 91 nm). The ability to utilize green light offers competitive advantages for enhancing biomass production, particularly under conditions of dense cultures, long light pathways and high light intensity. Green light acclimation for an eukaryotic microalgae in conjunction with the formation of new aberrant geranylgeranylated chlorophylls and high efficiency of growth rates are novel for eukaryotic microalgae. Illumination with green light could enhance productivity in industrial processes and trigger the formation of new metabolites-thus, underlying mechanisms require further investigation.

Towards an understanding of oleate hydratases and their application in industrial processes.

Fatty acid hydratases are unique to microorganisms. Their native function is the oxidation of unsaturated C-C bonds to enable detoxification of environmental toxins. Within this enzyme family, the oleate hydratases (Ohys), which catalyze the hydroxylation of oleic acid to 10-(R)-hydroxy stearic acid (10-HSA) have recently gained particular industrial interest. 10-HSA is considered to be a replacement for 12-(R)-hydroxy stearic acid (12-HSA), which has a broad application in the chemical and pharmaceutical industry. As 12-HSA is obtained through an energy consuming synthesis process, the biotechnological route for sustainable 10-HSA production is of significant industrial interest. All Ohys identified to date have a non-redox active FAD bound in their active site. Ohys can be divided in several subfamilies, that differ in their oligomerization state and the decoration with amino acids in their active sites. The latter observation indicates a different reaction mechanism across those subfamilies. Despite intensive biotechnological, biochemical and structural investigations, surprising little is known about substrate binding and the reaction mechanism of this enzyme family. This review, summarizes our current understanding of Ohys with a focus on sustainable biotransformation.

A Newly Designed Automatically Controlled, Sterilizable Flat Panel Photobioreactor for Axenic Algae Culture.

In context of the global climate change, microalgae processes are gaining momentum as a biotechnological tool for direct fixation and valorization of greenhouse gases. Algae have the metabolic capacity to photosynthetically convert CO2 into high value products, such as food additives, under economic boundary conditions. High cost, commercial flat panel gas-lift bioreactors for microalgae cultivation at laboratory scale provide either small volumes or no sterile operation, which limits academic research. This brief report presents initial data for a new type of sterile operating flat panel gas-lift bioreactor with a unique asymmetrical U-shape. It utilizes automatable process control technologies that adhere to industrial standards to enhance data reproducibility and aid industrial scale up. The practicability was demonstrated using a Chlorella sorokiniana cultivation, which showed the typical growth behavior. Due to the sophisticated implemented control engineering technology, pivotal parameters as pH and temperature can be determined within a range of ±0.1 units, which was confirmed experimentally. The new flat panel gas-lift photobioreactor presented in this brief report fills the technology gap at laboratory scale with an autoclavable volume of 7.2 L. Moreover, it is easy to rebuild by means of the hereby provided blueprint, while exhibiting a six-fold cost reduction compared to commercially available flat panel photobioreactors.

Life cycle greenhouse gas emissions of microalgal fuel from thin-layer cascades.

Thin-layer cascades (TLCs) enable algae cultivation at high cell densities, thus increasing biomass yields and facilitating the harvest process. This makes them a promising technology for industrial-scale algal fuel production. Using Life Cycle Assessment (LCA), we calculate the greenhouse gas (GHG) emissions of aviation fuel produced using algal biomass from TLCs. We find that the impact (81 g CO2e per MJ) is lower than that of fuel from algal biomass cultivated in open race way ponds (94 g CO2e). However, neither of the two cultivation systems achieve sufficient GHG savings for compliance with the Renewable Energy Directive II. Seawater desalination in particular dominates the TLC impact, indicating a trade-off between carbon and water footprint. In both cultivation systems, the mixing power and fertilizer consumption present further significant impacts. There is uncertainty in the correlation between mixing power and algal oil yield, which should be investigated by future experimental studies.

Enzymatic Modification of Native Chitin and Conversion to Specialty Chemical Products.

: Chitin is one of the most abundant biomolecules on earth, occurring in crustacean shells and cell walls of fungi. While the polysaccharide is threatening to pollute coastal ecosystems in the form of accumulating shell-waste, it has the potential to be converted into highly profitable derivatives with applications in medicine, biotechnology, and wastewater treatment, among others. Traditionally this is still mostly done by the employment of aggressive chemicals, yielding low quality while producing toxic by-products. In the last decades, the enzymatic conversion of chitin has been on the rise, albeit still not on the same level of cost-effectiveness compared to the traditional methods due to its multi-step character. Another severe drawback of the biotechnological approach is the highly ordered structure of chitin, which renders it nigh impossible for most glycosidic hydrolases to act upon. So far, only the Auxiliary Activity 10 family (AA10), including lytic polysaccharide monooxygenases (LPMOs), is known to hydrolyse native recalcitrant chitin, which spares the expensive first step of chemical or mechanical pre-treatment to enlarge the substrate surface. The main advantages of enzymatic conversion of chitin over conventional chemical methods are the biocompability and, more strikingly, the higher product specificity, product quality, and yield of the process. Products with a higher Mw due to no unspecific depolymerisation besides an exactly defined degree and pattern of acetylation can be yielded. This provides a new toolset of thousands of new chitin and chitosan derivatives, as the physio-chemical properties can be modified according to the desired application. This review aims to provide an overview of the biotechnological tools currently at hand, as well as challenges and crucial steps to achieve the long-term goal of enzymatic conversion of native chitin into specialty chemical products.

Current understanding and biotechnological application of the bacterial diterpene synthase CotB2.

CotB2 catalyzes the first committed step in cyclooctatin biosynthesis of the soil bacterium Streptomyces melanosporofaciens. To date, CotB2 represents the best studied bacterial diterpene synthase. Its reaction mechanism has been addressed by isoptope labeling, targeted mutagenesis and theoretical computations in the gas phase, as well as full enzyme molecular dynamic simulations. By X-ray crystallography different snapshots of CotB2 from the open, inactive, to the closed, active conformation have been obtained in great detail, allowing us to draw detailed conclusions regarding the catalytic mechanism at the molecular level. Moreover, numerous alternative geranylgeranyl diphosphate cyclization products obtained by CotB2 mutagenesis have exciting applications for the sustainable production of high value bioactive substances.

In Vitro Bioconversion of Pyruvate to n-Butanol with Minimized Cofactor Utilization.

Due to enhanced energy content and reduced hygroscopicity compared with ethanol, n-butanol is flagged as the next generation biofuel and platform chemical. In addition to conventional cellular systems, n-butanol bioproduction by enzyme cascades is gaining momentum due to simplified process control. In contrast to other bio-based alcohols like ethanol and isobutanol, cell-free n-butanol biosynthesis from the central metabolic intermediate pyruvate involves cofactors [NAD(P)H, CoA] and acetyl-CoA-dependent intermediates, which complicates redox and energy balancing of the reaction system. We have devised a biochemical process for cell-free n-butanol production that only involves three enzyme activities, thereby eliminating the need for acetyl-CoA. Instead, the process utilizes only NADH as the sole redox mediator. Central to this new process is the amino acid catalyzed enamine-aldol condensation, which transforms acetaldehyde directly into crotonaldehyde. Subsequently, crotonaldehyde is reduced to n-butanol applying a 2-enoate reductase and an alcohol dehydrogenase, respectively. In essence, we achieved conversion of the platform intermediate pyruvate to n-butanol utilizing a biocatalytic cascade comprising only three enzyme activities and NADH as reducing equivalent. With reference to previously reported cell-free n-butanol reaction cascades, we have eliminated five enzyme activities and the requirement of CoA as cofactor. Our proof-of-concept demonstrates that n-butanol was synthesized at neutral pH and 50°C. This integrated reaction concept allowed GC detection of all reaction intermediates and n-butanol production of 148 mg L-1 (2 mM), which compares well with other cell-free n-butanol production processes.

Identification and optimization of a novel thermo- and solvent stable ketol-acid reductoisomerase for cell free isobutanol biosynthesis.

Due to its enhanced energy content and hydrophobicity, isobutanol is flagged as a next generation biofuel and chemical building block. For cellular and cell-free isobutanol production, NADH dependent (over NADPH dependent) enzyme systems are desired. To improve cell-free isobutanol processes, we characterized and catalytically optimized a NADH dependent, thermo- and solvent stable ketol-acid reductoisomerase (KARI) derived from the bacterium Meiothermus ruber (Mr). The wild type Mr-KARI has the most temperature tolerant KARI specific activity reported to date. The KARI screening procedure developed in this study allows accelerated molecular optimization. Thus, a KARI variant with a 350% improved activity and enhanced NADH cofactor specificity was identified. Other KARI variants gave insights into Mr-KARI structure-function relationships.

Detailed structure-function correlations of Bacillus subtilis acetolactate synthase.

Isobutanol is deemed to be a next-generation biofuel and a renewable platform chemical.1 Non-natural biosynthetic pathways for isobutanol production have been implemented in cell-based and in vitro systems with Bacillus subtilis acetolactate synthase (AlsS) as key biocatalyst.2-6 AlsS catalyzes the condensation of two pyruvate molecules to acetolactate with thiamine diphosphate and Mg(2+) as cofactors. AlsS also catalyzes the conversion of 2-ketoisovalerate into isobutyraldehyde, the immediate precursor of isobutanol. Our phylogenetic analysis suggests that the ALS enzyme family forms a distinct subgroup of ThDP-dependent enzymes. To unravel catalytically relevant structure-function relationships, we solved the AlsS crystal structure at 2.3 Å in the presence of ThDP, Mg(2+) and in a transition state with a 2-lactyl moiety bound to ThDP. We supplemented our structural data by point mutations in the active site to identify catalytically important residues.

Meiothermus ruber thiolase - a new process stable enzyme for improved butanol synthesis.

Butanol is an important renewable building block for the chemical, textile, polymer and biofuels industry due to its increased energy density. Current biotechnological butanol production is a Clostridial based anaerobic fermentation process. Thiolase (EC 2.3.1.9/EC 2.3.1.16) is a key enzyme in this biosynthetic conversion of glucose to butanol. It catalyzes the condensation of two acetyl-CoA molecules, forming acetoacetyl-CoA, which is the first committed step in butanol biosynthesis. The well characterized clostridial thiolases are neither solvent nor thermo stable, which limits butanol yields. We have isolated and characterized a new thermo- (IT50 50 °C = 199 ± 0.1 h) and solvent stable (IS50 > 4%) thiolase derived from the thermophilic bacterium Meiothermus ruber. The observed catalytic constants were Km = 0.07 ± 0.01 mM and kcat = 0.80 ± 0.01 s(-1). In analogy to other thiolases, the enzyme was inhibited by NAD(+) (Ki = 38.7 ± 5.8 mM) and CoA (Ki = 105.1 ± 6.6 µM) but not NADH. The enzyme was stable under harsh process conditions (T = 50 °C, Butanol = 4% v/v) for prolonged time periods (τ = 7 h). The new enzyme provides for targeted in-vivo and in-vitro butanol biosynthesis under industrially relevant process conditions.

Cell-free metabolic engineering: production of chemicals by minimized reaction cascades.

The limited supply of fossil resources demands the development of renewable alternatives to petroleum-based products. Here, biobased higher alcohols such as isobutanol are versatile platform molecules for the synthesis of chemical commodities and fuels. Currently, their fermentation-based production is limited by the low tolerance of microbial production systems to the end products and also by the low substrate flux into cell metabolism. We developed an innovative cell-free approach, utilizing an artificial minimized glycolytic reaction cascade that only requires one single coenzyme. Using this toolbox the cell-free production of ethanol and isobutanol from glucose was achieved. We also confirmed that these streamlined cascades functioned under conditions at which microbial production would have ceased. Our system can be extended to an array of industrially-relevant molecules. Application of solvent-tolerant biocatalysts potentially allows for high product yields, which significantly simplifies downstream product recovery.

Protein trans-splicing on an M13 bacteriophage: towards directed evolution of a semisynthetic split intein by phage display.

Split inteins link their fused peptide or protein sequences with a peptide bond in an autocatalytic reaction called protein trans-splicing. This reaction is becoming increasingly important for a variety of applications in protein semisynthesis, polypeptide circularisation, construction of biosensors, or segmental isotopic labelling of proteins. However, split inteins exhibit greatly varying solubility, efficiency and tolerance towards the nature of the fused sequences as well as reaction conditions. We envisioned that phage display as an in vitro selection technique would provide a powerful tool for the directed evolution of split inteins with improved properties. As a first step towards this goal, we show that presentation of active split inteins on an M13 bacteriophage is feasible. Two different C-terminal intein fragments of the Ssp DnaB intein, artificially split at amino acid positions 104 and 11, were encoded in a phagemid vector in fusion to a truncated gpIII protein. For efficient production of hybrid phages, the presence of a soluble domain tag at their N-termini was necessary. Immunoblot analysis revealed that the hybrid phages supported protein trans-splicing with a protein or a synthetic peptide, respectively, containing the complementary intein fragment. Incorporation of biotin or desthiobiotin by this reaction provides a straightforward strategy for future enrichment of desired mutants from randomised libraries of the C-terminal intein fragments on streptavidin beads. Protein semisynthesis on a phage could also be exploited for the selection of chemically modified proteins with unique properties.

Semisynthesis of proteins using split inteins.

Protein splicing is an autocatalytic reaction in which an internal protein domain, the intein, excises itself out of a precursor protein and concomitantly links the two flanking sequences, the exteins, with a native peptide bond. In split inteins, the intein domain is divided into two parts that undergo fragment association followed by protein splicing in trans. Thus, the extein sequences joined in the process originate from two separate molecules. The specificity and sequence promiscuity of split inteins make this approach a generally useful tool for the preparation of semisynthetic proteins. To this end, the recombinant part of the protein of interest is expressed as a fusion protein with one split intein fragment. The synthetic part is extended by the other, complementary fragment of the split intein. A recently introduced split intein, in which the N-terminal fragment consists of only 11 native amino acids, has greatly facilitated preparation of the synthetic part by solid-phase peptide synthesis. This intein enables the chemoenzymatic synthesis of N-terminally modified semisynthetic proteins. The reaction can be performed under native conditions and at protein and peptide concentrations in the low micromolar range. In contrast to chemical ligation procedures like native chemical ligation and expressed protein ligation, the incorporation of a thioester group and an aminoterminal cysteine into the two polypeptides to be linked is not necessary. We discuss properties of useful inteins, design rules for split inteins and intein insertion sites and we describe selected examples in detail.