RESUMO
Specific heat capacity ( C P ) is regarded as a fundamental parameter for the design, operation, and optimization of the heat transfer equipment widely used in the food industry. Using the calorimetric ASTM E1269-11 standard procedure, the C P -temperature ( C P ( T ) ) curves of fruit juice model systems prepared at different mass fractions of fructose/glucose/sucrose/citric acid/pectin and water were measured. Thus, experimental data of C P for solid samples in crystalline and amorphous states from -80 °C up to the melting temperature range and for aqueous samples from -80 to 110 °C were generated. In the tested temperature interval, the C P of crystalline, amorphous, and aqueous samples were found to be in the ranges of 0.037 ± 0.020 to 5.61 ± 0.04; 0.061 ± 0.004 to 3.12 ± 0.19, and 0.363 ± 0.05 to 3.24 ± 0.14 kJ/kg °C, respectively. Also, a generalized empirical equation based on the type and concentration of components was developed to predict the C P ( T ) curves of the studied samples. The proposed equation exhibited a low error sum of squares (SSE < 57.3) and a high coefficient of determination (R2 > 0.927). An analysis of variance (ANOVA) was performed with a confidence level of 95% (p < 0.05). The C P ( T ) curves were influenced by temperature, thermal transitions, water, solid types, and compound interactions. Glucose was one of the solids that most significantly influenced the C P values of samples. PRACTICAL APPLICATION: The experimental specific heat capacity data and empirical equation proposed in this study are relevant to the design, evaluation, and optimization of heat transfer equipment involved in many foods and biochemical industrial processes such as cryopreservation, frozen storage, freezing, chilling, drying, and the cooking of hard candies.
Assuntos
Varredura Diferencial de Calorimetria/métodos , Frutose/química , Sucos de Frutas e Vegetais/análise , Glucose/química , Temperatura Alta , Sacarose/química , Água/química , TemperaturaRESUMO
The state diagram, which is defined as a stability map of different states and phases of a food as a function of the solid content and temperature, is regarded as fundamental approach in the design and optimization of processes or storage procedures of food in the low-, intermediate-, and high-moisture domains. Therefore, in this study, the effects of maltodextrin addition on the freezing points (Tm', Tm) and glass transition temperatures (Tg', Tg) required for the construction of state diagrams of fruit juice model systems by using differential scanning calorimetry methods was investigated. A D-optimal experimental design was used to prepare a total of 25 anhydrous model food systems at various dry mass fractions of fructose, glucose, sucrose, pectin, citric acid, and maltodextrin, in which this last component varied between 0 and 0.8. It was found that maltodextrin mass fractions higher than 0.4 are required to induce significant increases of Tg', Tm', Tg, and Tm curves. From this perspective, maltodextrin is a good alternative as a cryoprotectant and as a carrier agent in the food industry. Furthermore, solute-composition-based mathematical models were developed to evaluate the influence of the chemical composition on the thermal transitions and to predict the state diagrams of fruit juices at different maltodextrin mass fractions.