One Ligand to Bind them All: S~C~S2- Carbon- and Sulfur-Based Gem-Dianion as Structuring Ligand for Iron Polymetallic Assemblies.

Numerous synthetic models of the FeMo-co cluster of nitrogenases have been proposed to find the simplest structure with relevant reactivity. Indeed, such structures are able to perform multi-electrons reduction processes, such as the conversion of N2 to ammonia, and of CO2 into methane and alkenes. The most challenging parameter to imitate is indeed the central carbide ligand, which is believed to maintain the integrity of iron sulfide assembly during the course of catalytic cycles. The study proposes the use of bis(diphenylthiophosphinoyl)methanediide (SCS)2- as an ideal platform for the synthesis of bi- and tetra-metallic iron complexes, in which the iron-carbon interaction is maintained upon structural diversification and redox state changes.

Partial Deoxygenative CO Homocoupling by a Diiron Complex.

One route to address climate change is converting carbon dioxide to synthetic carbon-neutral fuels. Whereas carbon dioxide to CO conversion has precedent in homo- and heterogeneous catalysis, deoxygenative coupling of CO to products with C-C bonds-as in liquid fuels-remains challenging. Here, we report coupling of two CO molecules by a diiron complex. Reduction of Fe2 (CO)2 L (2), where L2- is a bis(ß-diketiminate) cyclophane, gives [K(THF)5 ][Fe2 (CO)2 L] (3), which undergoes silylation to Fe2 (CO)(COSiMe3 )L (4). Subsequent C-OSiMe3 bond cleavage and C=C bond formation occurs upon reduction of 4, yielding Fe2 (µ-CCO)L. CO derived ligands in this series mediate weak exchange interactions with the ketenylidene affording the smallest J value, with changes to local metal ion spin states and coupling schemes (ferro- vs. antiferromagnetism) based on DFT calculations, Mössbauer and EPR spectroscopy. Finally, reaction of 5 with KEt3 BH or methanol releases the C2 O2- ligand with retention of the diiron core.

FeNC Oxygen Reduction Electrocatalyst with High Utilization Penta-Coordinated Sites.

Atomic Fe in N-doped carbon (FeNC) electrocatalysts for oxygen (O2 ) reduction at the cathode of proton exchange membrane fuel cells are the most promising alternative to platinum-group-metal catalysts. Despite recent progress on atomic FeNC O2  reduction, their controlled synthesis and stability for practical applications remain challenging. A two-step synthesis approach has recently led to significant advances in terms of Fe-loading and mass activity; however, the Fe utilization remains low owing to the difficulty of building scaffolds with sufficient porosity that electrochemically exposes the active sites. Herein, this issue is addressed by coordinating Fe in a highly porous nitrogen-doped carbon support (≈3295 m2  g-1 ), prepared by pyrolysis of inexpensive 2,4,6-triaminopyrimidine and a Mg2+ salt active site template and porogen. Upon Fe coordination, a high electrochemical active site density of 2.54 × 1019  sites gFeNC -1  and a record 52% FeNx electrochemical utilization based on in situ nitrite stripping are achieved. The Fe single atoms are characterized pre- and post-electrochemical accelerated stress testing by aberration-corrected high-angle annular dark field scanning transmission electron microscopy, showing no Fe clustering. Moreover, ex situ X-ray absorption spectroscopy and low-temperature Mössbauer spectroscopy suggest the presence of penta-coordinated Fe sites, which are further studied by density functional theory calculations.

Dinitrogen Coordination to a High-Spin Diiron(I/II) Species.

Dinitrogen coordination to iron centers underpins industrial and biological fixation in the Haber-Bosch process and by the FeM cofactors in the nitrogenase enzymes. The latter employ local high-spin metal centers; however, iron-dinitrogen coordination chemistry remains dominated by low-valent states, contrasting the enzyme systems. Here, we report a high-spin mixed-valent cis-(µ-1,2-dinitrogen)diiron(I/II) complex [(FeBr)2 (µ-N2 )Lbis ]- (2), where [Lbis ]- is a bis(ß-diketiminate) cyclophane. Field-applied Mössbauer spectra, dc and ac magnetic susceptibility measurements, and computational methods support a delocalized S=7 /2 Fe2 N2 unit with D=-5.23 cm-1 and consequent slow magnetic relaxation.

Access to Metal Centers and Fluxional Hydride Coordination Integral for CO2 Insertion into [Fe3(µ-H)3]3+ Clusters.

CO2 insertion into tri(µ-hydrido)triiron(II) clusters ligated by a tris(ß-diketiminate) cyclophane is demonstrated to be balanced by sterics for CO2 approach and hydride accessibility. Time-resolved NMR and UV-vis spectra for this reaction for a complex in which methoxy groups border the pocket of the hydride donor (Fe3H3L2, 4) result in a decreased activation barrier and increased kinetic isotope effect consistent with the reduced sterics. For the ethyl congener Fe3H3L1 (2), no correlation is found between rate and reaction solvent or added Lewis acids, implying CO2 coordination to an Fe center in the mechanism. The estimated hydricity (50 kcal/mol) based on observed H/D exchange with BD3 requires Fe-O bond formation in the product to offset an endergonic CO2 insertion. µ3-hydride coordination is noted to lower the activation barrier for the first CO2 insertion event in DFT calculations.

Cleavage of cluster iron-sulfide bonds in cyclophane-coordinated FenSm complexes.

Reaction of the tri(µ-sulfido)triiron(iii) tris(ß-diketiminate) cyclophane complex, Fe3S3LEt/Me (1), or of the di(µ-sulfido)diiron(iii) complex Fe2S2HLEt/Me (5), with the related tri(bromide)triiron(ii) complex Fe3Br3LEt/Me (2) results in electron and ligand redistribution to yield the mixed-ligand multiiron complexes, including Fe3Br2SLEt/Me (3) and Fe2Br2SHLEt/Me (4). The cleavage and redistribution observed in these complexes is reminiscent of necessary Fe-S bond cleavage for substrate activation in nitrogenase enzymes, and provides a new perspective on the lability of Fe-S bonds in FeS clusters.

Catalytic Silylation of Dinitrogen by a Family of Triiron Complexes.

A series of triiron complexes supported by a tris(ß-diketiminate)cyclophane (L 3- ) catalyze the reduction of dinitrogen to tris(trimethylsilyl)amine using KC8 and Me3SiCl. Employing Fe3Br3 L affords 83 ± 7 equiv. NH4 +/complex after protonolysis, which is a 50% yield based on reducing equivalents. The series of triiron compounds tested evidences the subtle effects of ancillary donors, including halides, hydrides, sulfides, and carbonyl ligands, and metal oxidation state on N(SiMe3)3 yield, and highlight Fe3(µ3-N)L as a common species in product mixtures. These results suggest that ancillary ligands can be abstracted with Lewis acids under reducing conditions.

Correction to: Contribution of Mössbauer spectroscopy to the investigation of Fe/S biogenesis.

The article "Contribution of Mössbauer spectroscopy to the investigation of Fe/S biogenesis", written by Ricardo Garcia­Serres, Martin Clémancey, Jean­Marc Latour, Geneviève Blondin was originally published electronically on the publisher's internet portal (currently SpringerLink) without open access.

Development of a Rubredoxin-Type Center Embedded in a de Dovo-Designed Three-Helix Bundle.

Protein design is a powerful tool for interrogating the basic requirements for the function of a metal site in a way that allows for the selective incorporation of elements that are important for function. Rubredoxins are small electron transfer proteins with a reduction potential centered near 0 mV (vs normal hydrogen electrode). All previous attempts to design a rubredoxin site have focused on incorporating the canonical CXXC motifs in addition to reproducing the peptide fold or using flexible loop regions to define the morphology of the site. We have produced a rubredoxin site in an utterly different fold, a three-helix bundle. The spectra of this construct mimic the ultraviolet-visible, Mössbauer, electron paramagnetic resonance, and magnetic circular dichroism spectra of native rubredoxin. Furthermore, the measured reduction potential suggests that this rubredoxin analogue could function similarly. Thus, we have shown that an α-helical scaffold sustains a rubredoxin site that can cycle with the desired potential between the Fe(II) and Fe(III) states and reproduces the spectroscopic characteristics of this electron transport protein without requiring the classic rubredoxin protein fold.

Contribution of Mössbauer spectroscopy to the investigation of Fe/S biogenesis.

Fe/S cluster biogenesis involves a complex machinery comprising several mitochondrial and cytosolic proteins. Fe/S cluster biosynthesis is closely intertwined with iron trafficking in the cell. Defects in Fe/S cluster elaboration result in severe diseases such as Friedreich ataxia. Deciphering this machinery is a challenge for the scientific community. Because iron is a key player, 57Fe-Mössbauer spectroscopy is especially appropriate for the characterization of Fe species and monitoring the iron distribution. This minireview intends to illustrate how Mössbauer spectroscopy contributes to unravel steps in Fe/S cluster biogenesis. Studies were performed on isolated proteins that may be present in multiple protein complexes. Since a few decades, Mössbauer spectroscopy was also performed on whole cells or on isolated compartments such as mitochondria and vacuoles, affording an overview of the iron trafficking. This minireview aims at presenting selected applications of 57Fe-Mössbauer spectroscopy to Fe/S cluster biogenesis.

Spectroscopic evidence for cofactor-substrate interaction in the radical-SAM enzyme TYW1.

TYW1 is a metalloenzyme involved in the modifications of guanosine 37 of Phe-tRNA of Eukaryota and Archaea. It catalyzes the second step of Wybutosine biosynthesis, which consists of the formation of the tricyclic compound imG-14 from m1G using pyruvate and SAM (S-adenosyl-methionine) as co-substrates. Two [4Fe-4S] clusters are needed in the catalytic process. One effects the reductive binding of SAM, which initiates the radical reaction that inserts a C-C moiety into m1G. The other [4Fe-4S] cluster binds the pyruvate molecule that provides the C-C motif. Using a combination of EPR and Mössbauer spectroscopy, we have been able to probe the binding of both cofactors to the FeS clusters. The results highlight an interaction between pyruvate and SAM, indicating that they bind in close vicinity inside the catalytic pocket. They also indicate a chelating binding mode of pyruvate to the accessible Fe site of the corresponding FeS cluster. This binding mode has been used to construct a docking model of holoTYW1 with pyruvate and SAM, which is consistent with the spectroscopic findings.

Reactivity of hydride bridges in a high-spin [Fe3(µ-H)3]3+ cluster: reversible H2/CO exchange and Fe-H/B-F bond metathesis.

The triiron trihydride complex Fe3H3L (1) [where L3- is a tris(ß-diketiminate)cyclophanate] reacts with CO and with BF3·OEt2 to afford (FeICO)2FeII(µ3-H)L (2) and Fe3F3L (3), respectively. Variable-temperature and applied-field Mössbauer spectroscopy support the assignment of two high-spin (HS) iron(i) centers and one HS iron(ii) ion in 2. Preliminary studies support a CO-induced reductive elimination of H2 from 1, rather than CO trapping a species from an equilibrium mixture. This complex reacts with H2 to regenerate 1 under a dihydrogen atmosphere, which represents a rare example of reversible CO/H2 exchange and the first to occur at high-spin metal centers, as well as the first example of a reversible multielectron redox reaction at a designed high-spin metal cluster. The formation of 3 proceeds through a previously unreported net fluoride-for-hydride substitution, and 3 is surprisingly chemically inert to Si-H bonds and points to an unexpectedly large difference between the Fe-F and Fe-H bonds in this high-spin system.

A three-coordinate Fe(ii) center within a [3Fe-(µ3-S)] cluster that provides an accessible coordination site.

A µ3-sulfide bridged triiron cluster(ii,ii,iii) supported by a cyclophane ligand undergoes metal-based reduction to yield an all-ferrous species. The latter complex incorporates a three-coordinate iron center that provides an accessible coordination site to a solvent molecule.

A [3Fe-3S](3+) cluster with exclusively µ-sulfide donors.

A [3Fe-3(µ-S)](3+) cluster is reported in which each ferric center has a distorted trigonal pyramidal geometry, with an S = 1/2 ground state for the cluster and unusually anisotropic hyperfine coupling constants as determined by variable temperature magnetometry and Mössbauer spectroscopy.

Reactivity of Hydride Bridges in High-Spin [3M-3(µ-H)] Clusters (M = FeII, CoII).

The designed [3M-3(µ-H)] clusters (M = Fe(II), Co(II)) Fe3H3L (1-H) and Co3H3L (2-H) [where L(3-) is a tris(ß-diketiminate) cyclophane] were synthesized by treating the corresponding M3Br3L complexes with KBEt3H. From single-crystal X-ray analysis, the hydride ligands are sterically protected by the cyclophane ligand, and these complexes selectively react with CO2 over other unsaturated substrates (e.g., CS2, Me3SiCCH, C2H2, and CH3CN). The reaction of 1-H or 2-H with CO2 at room temperature yielded Fe3(OCHO)(H)2L (1-CO2) or Co3(OCHO)(H)2L (2-CO2), respectively, which evidence the differential reactivity of the hydride ligands within these complexes. The analogous reactions at elevated temperatures revealed a distinct difference in the reactivity pattern for 2-H as compared to 1-H; Fe3(OCHO)3L (1-3CO2) was generated from 1-H, while 2-H afforded only 2-CO2.

A family of tri- and dimetallic pyridine dicarboxamide cryptates: unusual O,N,O-coordination and facile access to secondary coordination sphere hydrogen bonding interactions.

A series of tri- and dimetallic metal complexes of pyridine dicarboxamide cryptates are reported in which changes to the base and metal source result in diverse structure types. Addition of strong bases, such as KH or KN(SiMe3)2, followed by divalent metal halides allows direct access to trinuclear complexes in which each metal center is coordinated by a dianionic N,N,N-chelate of each arm. These complexes bind a guest K(+) cation within the central cavity in a trigonal planar coordination environment. Minor changes to the solvent and equivalents of base used in the syntheses of the triiron(II) and tricobalt(II) complexes affords two trinuclear clusters with atypical O,N,O-coordination by each pyridine dicarboxamide arm; the amide carbonyl O atoms are oriented toward the interior of the cavity to coordinate to each metal center. Finally, varying the base enables the selective synthesis of dinuclear nickel(II) and copper(II) complexes in which one pyridine dicarboxamide arm remains protonated. These amide protons are at one end of a hydrogen bonding network that extends throughout the internal cavity and terminates at a metal bound hydroxide, carbonate, or bicarbonate donor. In the dinickel complex, the bicarbonate cannot be liberated as CO2 either thermally or upon sparging with N2, which differs from previously reported monometallic complexes. The carbonate or bicarbonate ligands likely arise from sequestration of atmospheric CO2 based on the observed reaction of the di(hydroxonickel) analog.

Dinitrogen activation upon reduction of a triiron(II) complex.

Reaction of a trinuclear iron(II) complex, Fe3 Br3 L (1), with KC8 under N2 leads to dinitrogen activation products (2) from which Fe3 (NH)3 L (2-1; L is a cyclophane bridged by three ß-diketiminate arms) was characterized by X-ray crystallography. (1) H NMR spectra of the protonolysis product of 2 synthesized under (14) N2 and (15) N2 confirm atmospheric N2 reduction, and ammonia is detected by the indophenol assay (yield ∼30 %). IR and Mössbauer spectroscopy, and elemental analysis on 2 and 2-1 as well as the tri(amido)triiron(II) 3 and tri(methoxo)triiron 4 congeners support our assignment of the reduction product as containing protonated N-atom bridges.

Highly reactive nonheme iron(III) iodosylarene complexes in alkane hydroxylation and sulfoxidation reactions.

High-spin iron(III) iodosylarene complexes bearing an N-methylated cyclam ligand are synthesized and characterized using various spectroscopic methods. The nonheme high-spin iron(III) iodosylarene intermediates are highly reactive oxidants capable of activating strong C-H bonds of alkanes; the reactivity of the iron(III) iodosylarene intermediates is much greater than that of the corresponding iron(IV) oxo complex. The electrophilic character of the iron(III) iodosylarene complexes is demonstrated in sulfoxidation reactions.

Escherichia coli RIC is able to donate iron to iron-sulfur clusters.

Escherichia coli RIC (Repair of Iron Centers) is a diiron protein previously reported to be involved in the repair of iron-sulfur proteins damaged by oxidative or nitrosative stresses, and proposed to act as an iron donor. This possible role of RIC was now examined specifically by evaluating its ability to donate iron ions to apo-iron-sulfur proteins, determining the iron binding constants and assessing the lability of its iron ions. We show, by UV-visible, EPR and resonance Raman spectroscopies that RIC may participate in the synthesis of an iron-sulfur cluster in the apo-forms of the spinach ferredoxin and IscU when in the presence of the sulfide donating system IscS and L-cysteine. Iron binding assays allowed determining the as-isolated and fully reduced RIC dissociation constants for the ferric and ferrous iron of 10-27 M and 10-13 M, respectively. Mössbauer studies revealed that the RIC iron ions are labile, namely when the center is in the mixed-valence redox form as compared with the (µ-oxo) diferric one. Altogether, these results suggest that RIC is capable of delivering iron for the formation of iron-sulfur clusters.

Mössbauer spectroscopy.

Given its ability to detect all iron centers, to identify their electronic structures, and to quantify the ratios of the different iron forms present in a sample, many researchers turn to Mössbauer spectroscopy when wanting to address structural and mechanistic questions involving iron proteins. Yet, this technique applied to biochemistry is provided by only a few dedicated teams in the world. Technical difficulties ranging from sample preparation to data analysis and interpretation make necessary the collaboration between biochemists and Mössbauer spectroscopists. This chapter will be confined to iron Mössbauer. It will focus on giving biologists and biochemists the keys to understand what essential information Mössbauer spectroscopy can yield, and how to engage in successful collaborations with spectroscopists. After introducing the basic principles of a Mössbauer experiment, we will describe first how to prepare a suitable Mössbauer sample, then how this technique is applied to the identification of different iron species inside proteins.