Chloride Binding Modulated by Anion Receptors Bearing Tetrazine and Urea.

Modulation and fine-tuning of the strength of weak interactions to bind anions are described in a series of synthetic receptors. The general design of the receptors includes both a urea motif and a tetrazine motif. The synthetic sequence towards three receptors is detailed. Impacts of H-bond strength and linker length between urea and tetrazine on chloride complexation are studied. Binding properties of the chloride anion are examined in both the ground and excited states using a panel of analytical methods (NMR spectroscopy, mass spectrometry, UV/Visible spectroscopies, and fluorescence). A ranking of the receptors by complexation strength has been determined, allowing a better understanding of the structure-properties relationship on these compounds.

Labeled TEMPO-Oxidized Mannan Differentiates Binding Profiles within the Collectin Families.

Establishing the rapid and accurate diagnosis of sepsis is a key component to the improvement of clinical outcomes. The ability of analytical platforms to rapidly detect pathogen-associated molecular patterns (PAMP) in blood could provide a powerful host-independent biomarker of sepsis. A novel concept was investigated based on the idea that a pre-bound and fluorescent ligand could be released from lectins in contact with high-affinity ligands (such as PAMPs). To create fluorescent ligands with precise avidity, the kinetically followed TEMPO oxidation of yeast mannan and carbodiimide coupling were used. The chemical modifications led to decreases in avidity between mannan and human collectins, such as the mannan-binding lectin (MBL) and human surfactant protein D (SP-D), but not in porcine SP-D. Despite this effect, these fluorescent derivatives were captured by human lectins using highly concentrated solutions. The resulting fluorescent beads were exposed to different solutions, and the results showed that displacements occur in contact with higher affinity ligands, proving that two-stage competition processes can occur in collectin carbohydrate recognition mechanisms. Moreover, the fluorescence loss depends on the discrepancy between the respective avidities of the recognized ligand and the fluorescent mannan. Chemically modulated fluorescent ligands associated with a diversity of collectins may lead to the creation of diagnostic tools suitable for multiplex array assays and the identification of high-avidity ligands.

A bioinspired approach to fabricate fluorescent nanotubes with strong water adhesion by soft template electropolymerization and post-grafting.

HYPOTHESIS: In this original work, we aim to control both the surface wetting and fluorescence properties of extremely ordered and porous conducting polymer nanotubes prepared by soft template electropolymerization and post-grafting. For reaching this aim, various substituents of different hydrophobicity and fluorescence were post-grafted and the post-grafting yields were evaluated by surface analyses. We show that the used polymer is already fluorescent before post-grafting while the post-grafting yield and as a consequence the surface hydrophobicity highly depend on the substituent. EXPERIMENTS: Here, we have chosen to chemically grafting various fluorinated and aromatic substituents using a post-grafting in order to keep the same surface topography. Flat conducting polymer surfaces with similar properties have been also prepared for determining the surface energy with the Owens-Wendt equation and estimating the post-grafting yield by X-ray Photoemission Spectroscopy (XPS) and Time of Flight Secondary Emission Spectrometry (ToF-SIMS). For example, using fluorinated chains of various length (C4F9, C6F13 and C8F17), it is demonstrated that the surface hydrophobicity and oleophobicity do not increase with the fluorinated chain length due to the different post-grafting yields and because of the presence of nanoroughness after post-grafting. FINDINGS: These surfaces have high apparent water contact angle up to 130.5° but also strong water adhesion, comparable to rose petal effect even if there are no nanotubes on petal surface. XPS and ToF-SIMS analyses provided a detailed characterisation of the surface chemistry with a qualitative classification of the grafted surfaces (F6 > F4 > F8). SEM analysis shows that grafting does not alter the surface morphology. Finally, fluorescence analyses show that the polymer surfaces before post-treatment are already nicely fluorescent. Although the main goal of this paper was and is to understand the role of surface chemistry in tailoring the wetting properties of these surfaces rather than provide specific application examples, we believe that the obtained results can help the development of specific nanostructured materials for potential applications in liquid transport, or in stimuli responsive antimicrobial surfaces.

Design and property investigation on a five-interaction-based fluorescent anion receptor clip.

A molecular clip combining a doubly substituted fluorescent anion-π donor probe and two flexible arms bearing H-bond motifs constitutes a new generation of anion receptors. Five simultaneous non-covalent interactions are highlighted by theoretical complexation studies with five different anions. A large range of analytical techniques (electrospray-tandem mass spectrometry, NMR, UV-visible, steady-state and time-resolved fluorescence) were deployed to evaluate the stoichiometry and association constants with the selected anions. The photophysical and anion-π donor properties of the tetrazine ring allowed fine characterization of the binding properties of the ligand. Based on previously published results, an anti-cooperativity effect in non-covalent interactions was demonstrated.

Fluorescein Derivatives as Fluorescent Probes for pH Monitoring along Recent Biological Applications.

Potential of hydrogen (pH) is one of the most relevant parameters characterizing aqueous solutions. In biology, pH is intrinsically linked to cellular life since all metabolic pathways are implicated into ionic flows. In that way, determination of local pH offers a unique and major opportunity to increase our understanding of biological systems. Whereas the most common technique to obtain these data in analytical chemistry is to directly measure potential between two electrodes, in biological systems, this information has to be recovered in-situ without any physical interaction. Based on their non-invasive optical properties, fluorescent pH-sensitive probe are pertinent tools to develop. One of the most notorious pH-sensitive probes is fluorescein. In addition to excellent photophysical properties, this fluorophore presents a pH-sensitivity around neutral and physiologic domains. This review intends to shed new light on the recent use of fluorescein as pH-sensitive probes for biological applications, including targeted probes for specific imaging, flexible monitoring of bacterial growth, and biomedical applications.

Intertwined Detection and Recognition Roles of Tetrazine in Synergistic Anion-π and H-bond Based Anion Receptor.

The intrinsic properties of tetrazine as a π-anion receptor and as an on/off recognition probe merged with H-bond ability of an urea motif into a single architecture constitutes a new generation of well-defined anion receptors. Complexation properties directly benefit from the dual and synergistic contribution of tetrazine and urea. In this study, we report on the synthesis and assessment of binding properties to anions of diverse geometries. Association constants have been predicted by theoretical calculations and evaluated by multiple and complementary experimental techniques including electrospray-mass tandem spectroscopy, NMR, UV-visible, steady state fluorescence spectroscopies and time resolved fluorescence. These results provide the basis for a better understanding of both the complexation and the anion-dependent quenching mechanism.

Helically shaped cation receptor: design, synthesis, characterisation and first application to ion transport.

The methyl ester of 8-oxo-8H-indeno[2',1':7,8]naphtho[1,2-b]thiophene-2-carboxylic acid (1) and its corresponding PEGylated ester were synthesised and fully characterised. X-ray diffraction studies on (1) confirmed the helical structure of the receptor and that it is self-assembled into layers by π-π interactions. An in-depth study by DFT calculations and MS experiments (ESI-MS, MS/MS, IMRPD and ESI-IMS-MS) was carried out between (1) and the physiological cation K+. The formation of supramolecular complexes between (1) and K+ with different stoichiometries was demonstrated and the cation K+ preferentially interacts with the oxygen atoms of the carbonyl bond of the ketone and ester groups and the sulphur atom of the heterocycle. The ability of the two synthesized aromatic architectures to transport ions across a model lipid membrane has been studied by electrophysiology experiments. The formation of pores was observed, even at nanomolar concentrations. Since the PEGylated molecule showed more regular pore definitions than the hydrophobic molecule, the introduction of a polar hydrophilic chain made it possible to control the orientation of the aromatic architectures within the membrane.

Experimental Characterization of Droplet Adhesion: The Ejection Test Method (ETM) Applied to Surfaces with Various Hydrophobicity.

We study the wetting and the adhesive behavior of substrates made by electropolymerization of copolymers of pyrene substituted with fluoroalkyl and adamantyl groups. The hydrophobicity and water adhesion properties can be tuned by the molar percentage (mol %) of each pyrene monomer so that the substrate properties can vary from superhydrophobic to parahydrophobic, with respectively low and high water adhesion. The ejection test method (ETM) is proposed as an original tool to discriminate and characterize such substrates. Using a catapult-like apparatus, a droplet initially at rest on the surface is subject to a large acceleration and is subsequently ejected. Depending on the surface properties and initial catapult acceleration, the ejection is more or less efficient and occurs with or without fragmentation of the droplet. The ETM is shown to be a complementary test to the lateral adhesion and hysteresis classical measurements. This work is of importance for the understanding of adhesion phenomena on various surfaces and for a better quantitative characterization of their adhesive properties.

Topology and Electronic Density Driven Generation of Alkali Cation Complexes.

The formation and characterization of K+ and Cs+ complexes originating from the cooperativity of three non-covalent interactions is explored. The tridimensional preorganization of the naphthothiophene platform displays a favorable well-defined bay region combining a π fragment and a carbonyl moiety flanking a central sulfur atom. A joint theoretical and experimental infrared multiple photon dissociation (IRMPD) study allowed deciphering the key contribution of the orthogonal phenyl fragment to the elaboration of alkali metal complexes. In combination with S and CO interactions, the π-cation interaction significantly enhances the binding energies of naphthothiophene derivatives.

Synthesis, characterisation and application of pyridine-modified chitosan derivatives for the first non-racemic Cu-catalysed Henry reaction.

The preparation, characterisation and application of two pyridine-modified chitosan derivatives (C1 and C2) containing Cu(OAc)2 adsorbed as catalysts for the conversion of benzaldehyde into 2-nitro-1-phenylethanol are described. Quantitative solid-state 13C multiple-contact cross-polarization, magic-angle-spinning, nuclear magnetic resonance (MC-CP MAS NMR) measurements confirmed the successful grafting of 2-pyridinecarboxaldehyde and 6-methylpyridine-2-carboxaldehyde to the chitosan backbone and indicated that 47(±2)% of the NH2 groups were grafted for both C1 and C2. The use of C1-Cu(OAc)2 as a catalyst in the nitroaldol reaction led to 96(±1)% conversion and 19(±4)% enantiomeric excess (ee), while the use of C2-Cu(OAc)2 as a catalyst also promoted the nitroaldol reaction, affording almost quantitatively the expected 2-nitro-1-phenylethanol (98(±1)%) with 14.5(±1.5)% ee.

Selective synthesis of mono- and bis-butenolide α-aminomethyl adducts.

The selective installation of α-methylamine residues at the butenolide core is described using α-bromomethylene-γ-butenolide and primary as well as secondary amines in methanol at 0 °C. The preparation of mono- and bis-butenolide α-adducts is described. Bis-γ-butenolide adducts as well as mono α-aminomethyl-γ-butenolides can be selectively obtained depending on the nature of the reacting primary amine. In contrast, the use of secondary amines allows two different pathways leading either to the expected amino derivatives or to the formation of a C-O bond.

From α-Bromomethylbutenolide to Fused Tri(Tetra) Cyclic Dihydrofurandiones through Barbier Reaction-Heck Arylation Sequence.

A Barbier reaction-Heck arylation sequence from α-bromomethylbutenolide to fused tri and tetracyclic lactones has been developed. The first step involving a Barbier reaction enabled installing ortho-bromoaromatics in α-ylidene γ-lactones. The latter substrates were subjected to intramolecular Heck reaction conditions which selectively afforded 6,5,5 or 6,6,5 fused ring systems depending on the nature of the base employed.

Divergent strategy for the synthesis of original dihydrobenzo- and dihydronaphtho-acridines.

A straightforward access to numerous novel substituted dihydrobenzo- and dihydronaphthoacridines is described using a unique molecular platform in two key steps. A large range of carbon-based substituents such as aromatic, vinyl, alkynyl fragments through Pd-catalysed couplings has been installed. The molecular diversity is extended to the introduction of aza-heterocycles and further authorizes the installation of alkylamino chains by means of Cu-promoted C-N bond formation. Possible access to quinolinium salts is also described. The methodology revealed convenient preparation of a wide panel of molecules that display various rigidity/flexibility and lipophilic/hydrophilic balances. Finally, the influence of structural modulations on the photophysical properties of these novel architectures is also studied. It is noteworthy that styryl and alkynyl derivatives are emissive in water (ϕF up to 12%).

A spiral designed surface based on amino-perylene grafted polyacrylic acid.

This communication shows the possibility of inducing spontaneous special surface organisation by means of grafting a fluorescent aminobenzo[g,h,i]perylene derivative onto surface grown polyacrylic chains.

New chiral cyclooctatriene-based polycyclic architectures.

The synthesis and properties of new chiral polycyclic architectures that display both helicity and a saddle-type shape are described. The enantiomers have been separated, and their absolute configuration was determined by VCD and ECD. The unprecedented molecular architecture is based on a cyclooctatriene core surrounded by an association of benzo[c]fluorene and ortho-phenylene units.

Binaphthyl platform as starting materials for the preparation of electron rich benzo[g,h,i]perylenes. Application to molecular architectures based on amino benzo[g,h,i]perylenes and carborane combinations.

Valuable amino benzo[g,h,i]perylenes have been obtained through a one pot electrophilic aromatic substitution--Scholl reaction sequence. Novel molecular architectures combining 3D-o-carborane and planar amino benzo[g,h,i]perylene units are described. Photophysical properties of amino benzo[g,h,i]perylene and the carborane-appended derivatives are discussed.

Regio-defined amino[5]oxa- and thiahelicenes: a dramatic impact of the nature of the heteroatom on the helical shape and racemization barriers.

The present approach to heterohelicenes provides original [5]oxa- and thiahelicenes, where both oxygen and sulfur atoms are located at the end of the inner helix. Quantum chemical calculations are carried out to determine the pathway for interconversion between two enantiomers and demonstrate that the energy barrier is strongly dependent on the nature of the heteroatom present on the helical shape.

First expeditious synthesis of 6,11-diamino-[6]carbohelicenes.

The first synthesis of 6,11-diamino-[6]carbohelicenes is described: the short 5 step sequence involves Suzuki-Miyaura coupling, functional group transformations and electrophilic aromatic cyclisation; the original strategy allows the preparation of di- and tetra-substituted helicenes in comfortable yields.

The Bip method, based on the induced circular dichroism of a flexible biphenyl probe in terminally protected -Bip-Xaa*- dipeptides, for assignment of the absolute configuration of beta-amino acids.

An induced axial chirality of the biphenyl core of the Bip (2',1':1,2;1'',2'':3,4-dibenzcyclohepta-1,3-diene-6-amino-6-carboxylic acid) residue in the terminally protected dipeptides Boc-Bip-beta-Xaa*-OMe (beta-Xaa* = L-beta(3)-HAla, L-beta(3)-HVal, L-beta(3)-HLeu, L-beta(3)-HPro, trans-(1S,2S)-ACHC, trans-(1R,2R)-ACHC, trans-(1S,2S)-ACPC, trans-(1R,2R)-ACPC) resulted in an induced circular dichroism, revealing the usefulness of the Bip method for a reliable and fast assignment of the absolute configuration of chiral beta-amino acids. Remarkably, the Bip method was also applied to the unique spin-labeled, cyclic, beta-amino acids cis/trans-beta-TOAC and trans-POAC. In particular, this study allowed the assignment of the unknown absolute configurations of the enantiomers of the latter compound.