Operando acoustic analysis: a valuable method for investigating reaction mechanisms in mechanochemistry.

We present a new operando approach for following reactions taking place in mechanochemistry, relying on the analysis of the evolution of the sound during milling. We show that differences in sound can be directly correlated to (physico)chemical changes in the reactor, making this technique highly attractive and complementary to others for monitoring mechanochemical reactions. Most notably, it can provide unique information on the actual movements of the beads within the milling jars, which opens new avenues for helping rationalize mechanochemical processes.

Labeling and Probing the Silica Surface Using Mechanochemistry and 17 O†NMR Spectroscopy*.

In recent years, there has been increasing interest in developing cost-efficient, fast, and user-friendly 17 O enrichment protocols to help to understand the structure and reactivity of materials by using 17 O NMR spectroscopy. Here, we show for the first time how ball milling (BM) can be used to selectively and efficiently enrich the surface of fumed silica, which is widely used at industrial scale. Short milling times (up to 15 min) allowed modulation of the enrichment level (up to ca. 5 %) without significantly changing the nature of the material. High-precision 17 O compositions were measured at different milling times by using large-geometry secondary-ion mass spectrometry (LG-SIMS). High-resolution 17 O NMR analyses (including at 35.2 T) allowed clear identification of the signals from siloxane (Si-O-Si) and silanols (Si-OH), while DNP analyses, performed by using direct 17 O polarization and indirect 17 O{1 H} CP excitation, agreed with selective labeling of the surface. Information on the distribution of Si-OH environments at the surface was obtained from 2D 1 H-17 O D-HMQC correlations. Finally, the surface-labeled silica was reacted with titania and using 17 O DNP, their common interface was probed and Si-O-Ti bonds identified.

Looking into the dynamics of molecular crystals of ibuprofen and terephthalic acid using 17 O and 2 H nuclear magnetic resonance analyses.

Oxygen-17 and deuterium are two quadrupolar nuclei that are of interest for studying the structure and dynamics of materials by solid-state nuclear magnetic resonance (NMR). Here, 17 O and 2 H NMR analyses of crystalline ibuprofen and terephthalic acid are reported. First, improved 17 O-labelling protocols of these molecules are described using mechanochemistry. Then, dynamics occurring around the carboxylic groups of ibuprofen are studied considering variable temperature 17 O and 2 H NMR data, as well as computational modelling (including molecular dynamics simulations). More specifically, motions related to the concerted double proton jump and the 180° flip of the H-bonded (-COOH)2 unit in the crystal structure were looked into, and it was found that the merging of the C=O and C-OH 17 O resonances at high temperatures cannot be explained by the sole presence of one of these motions. Lastly, preliminary experiments were performed with a 2 H-17 O diplexer connected to the probe. Such configurations can allow, among others, 2 H and 17 O NMR spectra to be recorded at different temperatures without needing to tune or to change probe configurations. Overall, this work offers a few leads which could be of use in future studies of other materials using 17 O and 2 H NMR.

Functionalised polyhedral oligomeric silsesquioxane with encapsulated fluoride - first observation of fluxional SiF interactions in POSS.

The synthesis of a styryl functionalised POSS incorporating an encapsulated fluoride ion within a (SiO1.5)8 cage (T8-F) is reported. It was characterised by single crystal XRD, MALDI-MS, FTIR, solution (29Si, 19F, 13C, 1H) and solid state (29Si, 19F) NMR. In the absence of 1H decoupling, the 29Si solution NMR spectrum exhibited a triplet of doublets. In contrast, 1H, 19F and 1H/19F double-decoupling resulted in two, three and one signal, respectively, being consistent with a single Si site whose 29Si NMR signal is modulated by both the proximal aromatic-ring protons and fluoride. The associated SiF coupling constant (2.5 Hz) is substantially lower than expected for a covalent Si-F bond and arises from a fluxional SiF covalent effect in which the F- interacts equivalently with all eight Si atoms. Additional variable temperature NMR studies demonstrated a threshold at -5 °C below which no SiF interactions are observed, and above which an increasing SiF covalent character occurs.

Direct 17O Isotopic Labeling of Oxides Using Mechanochemistry.

While 17O NMR is increasingly being used for elucidating the structure and reactivity of complex molecular and materials systems, much effort is still required for it to become a routine analytical technique. One of the main difficulties for its development comes from the very low natural abundance of 17O (0.04%), which implies that isotopic labeling is generally needed prior to NMR analyses. However, 17O-enrichment protocols are often unattractive in terms of cost, safety, and/or practicality, even for compounds as simple as metal oxides. Here, we demonstrate how mechanochemistry can be used in a highly efficient way for the direct 17O isotopic labeling of a variety of s-, p-, and d-block oxides, which are of major interest for the preparation of functional ceramics and glasses: Li2O, CaO, Al2O3, SiO2, TiO2, and ZrO2. For each oxide, the enrichment step was performed under ambient conditions in less than 1 h and at low cost, which makes these synthetic approaches highly appealing in comparison to the existing literature. Using high-resolution solid-state 17O NMR and dynamic nuclear polarization, atomic-level insight into the enrichment process is achieved, especially for titania and alumina. Indeed, it was possible to demonstrate that enriched oxygen sites are present not only at the surface but also within the oxide particles. Moreover, information on the actual reactions occurring during the milling step could be obtained by 17O NMR, in terms of both their kinetics and the nature of the reactive species. Finally, it was demonstrated how high-resolution 17O NMR can be used for studying the reactivity at the interfaces between different oxide particles during ball-milling, especially in cases when X-ray diffraction techniques are uninformative. More generally, such investigations will be useful not only for producing 17O-enriched precursors efficiently but also for understanding better mechanisms of mechanochemical processes themselves.

Tunable vegetable oil/silica hybrid microparticles for poorly water-soluble drug delivery.

To encapsulate and deliver poorly water-soluble drugs, castor oil/silica hybrid microparticles (HMP)s were synthesized. Green chemistries were used to silylate the oil and further cross-link it into solid microparticles by sol-gel reaction. Silylated castor oils (ICO)s at various silylation ratios were prepared and allowed the solubilization of ibuprofen at several concentrations up to 16 wt%. The HMPs were formulated by ThermoStabilized Emulsion (TSE) process which permits to "freeze" the oil-in-water emulsion while the sol-gel reaction occurs. The hybrid mineral/organic composition and the morphology (spherical shape and micrometric size) of these HMPs were determined by complementary technics (SEM, TGA, EDX, 29Si NMR and FTIR spectroscopies). The HMPs reached a good ibuprofen loading efficiency regardless to the formulation used while the release kinetics in simulated oral administration exhibited a tunable release during 3 h according to the silylation ratio. The ibuprofen rate also influenced its own amorphous or crystalline character within the HMPs. For subcutaneous conditions, ibuprofen release took place over 15 days. Finally, biodegradability assays in simulated digestion medium suggested a surface-limited hydrolysis of the particles and cytocompatibility studies on NIH-3T3 and Caco-2 cells demonstrated an excellent cellular viability.

Drug delivery systems based on pharmaceutically active ionic liquids and biocompatible poly(lactic acid).

Poly(l-lactic acid) (PLLA) membranes containing pharmaceutically active ionic liquids (API-ILs) have been prepared by using a simple film casting from solvent evaporation method. Several sets of membranes were prepared from two different ionic liquids namely 1-methyl-3-butyl-imidazolium ibuprofenate (C4MImIbu) and lidocainium ibuprofenate (LidIbu) with different API-IL contents. Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), Wide-Angle and Small-Angle X-ray Scattering (WAXS and SAXS) revealed the strong influence of both the IL nature and content on the morphology and the crystallinity of the resulting PLLA. At 20 weight%, LidIbu was shown to act as a plasticizer for PLLA and homogeneous membranes were obtained. In contrast, at the same IL content, phase separation occurred using C4MImIbu, resulting in the formation of porous PLLA. An increase of LidIbu content to 50 weight% results also in phase separation. 1H and 1H-13C CP-MAS NMR measurements evidenced the influence of different morphologies and crystallinities on IL mobility. C4MImIbu was found to be highly mobile whereas the mobility of LidIbu was content dependent. At low percent, low mobility was observed while at higher content, two populations with respectively high and low mobility were observed. These PLLA-IL membranes were further tested as drug delivery systems. In accordance with the morphology and mobility obtained, we demonstrated that release kinetics from PLLA membranes can be tuned by the nature and the content of API-ILs. Sustainable release kinetics were obtained with API-IL acting as a plasticizer while the fastest release was obtained with API-IL acting as a porogenic agent.

14N solid-state NMR: a sensitive probe of the local order in zeolites.

Local order in as-synthesised zeolites templated by tetraalkylammonium cations is proven from solid-state (14)N NMR and related quadrupolar parameters, opening new perspectives in the study of porous materials.

Boronate ligands in materials: determining their local environment by using a combination of IR/solid-state NMR spectroscopies and DFT calculations.

Boronic acids (R-B(OH)(2)) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R-B(OH)(3)(-)) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C(4)H(9)-B(OH)(3)](2), which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid-state NMR spectroscopy ((1)H, (13)C, (11)B and (43)Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave--GIPAW--method). These data allow relationships between the geometry around the OH groups in boronates and the IR and (1)H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic-inorganic materials containing boronate building blocks.

Mesostructured fatty acid-tethered silicas: sustaining the order by co-templating with bulky precursors.

The co-condensation of functional alkoxysilanes with tetraethoxysilane in the presence of a structure directing agent under sol-gel process chemistry is a common way to access functional organosilica with an ordered mesostructure. In this report, bulky silylated fatty acid methyl esters were used both as co-templating bio-molecules and functionalizing agents in the process of supra-molecular silica mineralization. The highest structural regularity in terms of pore size distribution and channel size homogeneity was observed for carboxy-tethered silica possessing SBA-15-type architecture due to an enhanced fatty acid precursor-surfactant interaction. The carboxylic surface embedded within the hydrophobic environment of the fatty compounds confers to these materials interesting reactive-surface properties with promising applications as drug-delivery systems and bio-catalytic nanoreactors.

Drug nano-domains in spray-dried ibuprofen-silica microspheres.

Silica microspheres encapsulating ibuprofen in separated domains at the nanometre scale are formed by spray-drying and sol-gel processes. A detailed (1)H and (13)C NMR study of these microspheres shows that ibuprofen molecules are mobile and are interacting through hydrogen bonds with other ibuprofen molecules. (1)H magnetisation exchange NMR experiments were employed to characterize the size of the ibuprofen domains at the nanometre scale. These domains are solely formed by ibuprofen, and their diameters are estimated to be ∼40 nm in agreement with TEM observations. The nature and formation of these particular texture and drug dispersion are discussed.

Synthesis and characterization of crystalline structures based on phenylboronate ligands bound to alkaline earth cations.

We describe the preparation of the first crystalline compounds based on arylboronate ligands PhB(OH)(3)(-) coordinated to metal cations: [Ca(PhB(OH)(3))(2)], [Sr(PhB(OH)(3))(2)]·H(2)O, and [Ba(PhB(OH)(3))(2)]. The calcium and strontium structures were solved using powder and single-crystal X-ray diffraction, respectively. In both cases, the structures are composed of chains of cations connected through phenylboronate ligands, which interact one with each other to form a 2D lamellar structure. The temperature and pH conditions necessary for the formation of phase-pure compounds were investigated: changes in temperature were found to mainly affect the morphology of the crystallites, whereas strong variations in pH were found to affect the formation of pure phases. All three compounds were characterized using a wide range of analytical techniques (TGA, IR, Raman, XRD, and high resolution (1)H, (11)B, and (13)C solid-state NMR), and the different coordination modes of phenylboronate ligands were analyzed. Two different kinds of hydroxyl groups were identified in the structures: those involved in hydrogen bonds, and those that are effectively "free" and not involved in hydrogen bonds of any significant strength. To position precisely the OH protons within the structures, an NMR-crystallography approach was used: the comparison of experimental and calculated NMR parameters (determined using the Gauge Including Projector Augmented Wave method, GIPAW) allowed the most accurate positions to be identified. In the case of the calcium compound, it was found that it is the (43)Ca NMR data that are critical to help identify the best model of the structure.

Self-assembly of layered organosilicas based on weak intermolecular interactions.

New layered hybrid organic-inorganic materials were obtained directly by hydrolysis and polycondensation of monosilylated precursors of type (EtO)(3)Si(CH(2))(3)NH(C=O)NHC(n)H(2n+1) (n = 3, 8, 12 and 16). These precursors were easily prepared by reaction between commercially available triethoxysilylpropylisocyanate and primary aminoalkanes. The obtained materials were characterized by combining elemental analysis, X-ray powder diffraction, (13)C, (29)Si NMR and FT-IR spectroscopies. They were found to be well condensed, and stable in water. We showed that their formation results from a cooperative effect between hydrogen bonding interactions originating from ureido groups and hydrophobic interactions between the long alkyl chains. There is no formation of material when n = 2, or from (EtO)(3)SiC(n)H(2n+1) when n = 18, thus proving that both types of weak intermolecular interactions are required. The chelating property of these materials towards europium(III) ions was tested.

14N and 81Br quadrupolar nuclei as sensitive NMR Probes of n-alkyltrimethylammonium bromide crystal structures. An experimental and theoretical study.

This is the first time a comprehensive study has been carried out on n-alkyltrimethylammonium bromide salts using (14)N and (81)Br solid state NMR, X-ray diffraction, and theoretical calculations. The investigation represents a necessary step toward further (14)N and (81)Br NMR characterization of the environment of cationic and anionic groups in materials, accounting for the amphiphilic properties of cationic surfactants. The NMR spectra of five C(x)H(2x+1)(CH(3))(3)N(+)Br(-) polycrystalline samples with different n-alkyl chain lengths (x = 1, 12, 14, 16, 18) were recorded and modeled. The (14)N and (81)Br quadrupolar coupling interaction parameters (C(Q), eta(Q)) were also estimated from spectrum modeling and from computer simulation. The obtained results were discussed in depth making use of the experimental and reoptimized crystal structures. In the study, both (14)N and (81)Br nuclei were found to be sensitive probes for small structural variations. The parameters which influence the NMR properties the most are mobility, deviation of C-N-C bond angles from T(d) angles, and variations in r(N-Br) distances.

Hybrid materials and periodic mesoporous organosilicas containing covalently bonded organic anion and cation featuring MCM-41 and SBA-15 structure.

We report the synthesis of a new trialkoxysilylated ionic liquid based on disilylated guanidinium and monosilylated sulfonimide species. This compound allowed the successful preparation of new periodic mesoporous organosilicas containing covalently anchored ion-pair through both organo-cationic and organo-anionic moieties which have never been reported up to now. Two classes of hybrid materials containing guanidinium-sulfonimide ion-pairs (IPs) have been synthesized. The first type of material was prepared by grafting the silylated IP onto both MCM-41-type and SBA-15-type silicas according to a surface sol-gel polymerization. The second class was synthesized following a one-pot sol-gel procedure using silylated IP and tetraethoxysilane as framework precursors. These latter materials correspond to so-called periodic mesoporous organosilicas (PMOs) and gave "organo-ionically" modified MCM-41 and SBA-15 related solids. The materials were characterized by a series of techniques including XRD, nitrogen sorption, solid-state NMR, FTIR, transmission electronic microscopy, and elemental analysis. The highest structural regularity in terms of pore size distribution and channel size homogeneity was observed for IP-PMOs possessing SBA-15-type architecture due to an enhanced trialkoxysilylated IP precursor/surfactant interaction. Solvatochromic experiments with Reichardt's dye showed good accessibility of the silica-supported ion-pair and suggested the formation of monophasic materials.