The nature of the Fe-graphene interface at the nanometer level.

The emerging fields of graphene-based magnetic and spintronic devices require a deep understanding of the interface between graphene and ferromagnetic metals. This paper reports a detailed investigation at the nanometer level of the Fe-graphene interface carried out by angle-resolved photoemission, high-resolution photoemission from core levels, near edge X-ray absorption fine structure, scanning tunnelling microscopy and spin polarized density functional theory calculations. Quasi-free-standing graphene was grown on Pt(111), and the iron film was either deposited atop or intercalated beneath graphene. Calculations and experimental results show that iron strongly modifies the graphene band structure and lifts its π band spin degeneracy.

Origins of electronic band gap reduction in Cr/N codoped TiO2.

Recent studies indicated that noncompensated cation-anion codoping of wide-band-gap oxide semiconductors such as anatase TiO2 significantly reduces the optical band gap and thus strongly enhances the absorption of visible light [W. Zhu et al., Phys. Rev. Lett. 103, 226401 (2009)]. We used soft x-ray spectroscopy to fully determine the location and nature of the impurity levels responsible for the extraordinarily large (∼1 eV) band gap reduction of noncompensated codoped rutile TiO2. It is shown that Cr/N codoping strongly enhances the substitutional N content, compared to single element doping. The band gap reduction is due to the formation of Cr 3d3 levels in the lower half of the gap while the conduction band minimum is comprised of localized Cr 3d and delocalized N 2p states. Band gap reduction and carrier delocalization are critical elements for efficient light-to-current conversion in oxide semiconductors. These findings thus raise the prospect of using codoped oxide semiconductors with specifically engineered electronic properties in a variety of photovoltaic and photocatalytic applications.

In vitro regeneration of Didymopanax morototoni.

The present study aimed at establishing a complete plant regeneration protocol for Didymopanax morototoni (matchwood), a native Brazilian forest species. Four types of explants (root, shoot, node, and cotyledonary leaves) were obtained from in vitro germinated seeds. In the first step, woody plant medium (WPM) with casein hydrolysate (250 mgL-1 ) and 2,4-D (1.0 and 5.0 mgL-1) were used combined with kinetin (0.1 and 1.0 mgL-1). Twenty days after inoculation, the material was evaluated. Embryogenic calli were split, transferred to expression medium with several combinations of NAA and KIN, and moved to fresh medium after 60 days. Light did not interfere in embryo expression. Somatic embryos were formed either from individual cells or cell clusters. Plantlets were obtained in WPM medium and 10 gL-1 of sucrose with no plant regulator, or using 0.1 mgL-1 BAP and 0.5 mgL-1GA. Plantlets from somatic embryos of D. morototoni developed in 33% of the cases.

In vitro regeneration of Didymopanax morototoni

O presente estudo visou o estabelecimento de um completo protocolo de regeneração para Didymopanax morototoni (morototó, caixeta) uma espécie florestal nativa do Brasil. Quatro tipos de explantes (raiz, caule, nódulo foliar e folha cotiledonar) foram obtidos a partir de sementes germinadas. Na primeira etapa, meio WPM com caseína hidrolisada (250 mgL-1) e 2,4D (1,0 e 5,0 mgL-1) foram usados em combinação com cinetina (0,1 ou 1,0 mg L-1). Vinte dias depois de inoculado, o material foi avaliado. Calos embriogênicos foram divididos e transferidos para meio de expressão com várias combinações de ácido naftaleno-acético e cinetina, e repicados a cada 60 dias para meio novo. A luz não interferiu na expressão embriogênica. Embriões somáticos foram formados ou de células individuais ou de agregados de células. As plântulas foram obtidas no meio WPM com 10 g L-1 de sacarose e sem reguladores de crescimento ou com 0,1 mg L-1 de Benzil-adenina e 0,5 mg L-1 de giberelina. O desenvolvimento das plântulas a partir de embriões somáticos de D. morototoni foi alcançada em 33% dos casos.

In vitro regeneration of Didymopanax morototoni

The present study aimed at establishing a complete plant regeneration protocol for Didymopanax morototoni (matchwood), a native Brazilian forest species. Four types of explants (root, shoot, node, and cotyledonary leaves) were obtained from in vitro germinated seeds. In the first step, woody plant medium (WPM) with casein hydrolysate (250 mgL-1 ) and 2,4-D (1.0 and 5.0 mgL-1) were used combined with kinetin (0.1 and 1.0 mgL-1). Twenty days after inoculation, the material was evaluated. Embryogenic calli were split, transferred to expression medium with several combinations of NAA and KIN, and moved to fresh medium after 60 days. Light did not interfere in embryo expression. Somatic embryos were formed either from individual cells or cell clusters. Plantlets were obtained in WPM medium and 10 gL-1 of sucrose with no plant regulator, or using 0.1 mgL-1 BAP and 0.5 mgL-1GA. Plantlets from somatic embryos of D. morototoni developed in 33% of the cases.

O presente estudo visou o estabelecimento de um completo protocolo de regeneração para Didymopanax morototoni (morototó, caixeta) uma espécie florestal nativa do Brasil. Quatro tipos de explantes (raiz, caule, nódulo foliar e folha cotiledonar) foram obtidos a partir de sementes germinadas. Na primeira etapa, meio WPM com caseína hidrolisada (250 mgL-1) e 2,4D (1,0 e 5,0 mgL-1) foram usados em combinação com cinetina (0,1 ou 1,0 mg L-1). Vinte dias depois de inoculado, o material foi avaliado. Calos embriogênicos foram divididos e transferidos para meio de expressão com várias combinações de ácido naftaleno-acético e cinetina, e repicados a cada 60 dias para meio novo. A luz não interferiu na expressão embriogênica. Embriões somáticos foram formados ou de células individuais ou de agregados de células. As plântulas foram obtidas no meio WPM com 10 g L-1 de sacarose e sem reguladores de crescimento ou com 0,1 mg L-1 de Benzil-adenina e 0,5 mg L-1 de giberelina. O desenvolvimento das plântulas a partir de embriões somáticos de D. morototoni foi alcançada em 33% dos casos.

A new blood module for continuous renal replacement therapies.

A new blood module for continuous renal replacement therapies has been utilized to perform CVVH in critically ill patients. The features of the new module named (HP300 and manufactured by Medica srl (Medolla, Modena) are the easy installation and transportability to the bedside, the simple and safe management and the continuous measurement of the pre and post filter pressure with automatic calculation of the end-to-end pressure drop inside the filter. The last feature permits to detect early malfunctions of the filter due to fibers clotting or due to the internal coating of the hollow fibers by plasma proteins. In both cases the efficiency of the treatment can be reduced because of a significant reduction of the ultrafiltration rates or a remarkable decay of the membrane permeability and solute sieving coefficients. In many cases this reduction is only detected when important effects on solute removal have already occurred. In our experience, the new module permitted the substitution of the filters when early malfunctions were detected and maximal treatment efficiency was therefore guaranteed over extended periods of time.