Best Practices for Derivation and Application of Thresholds for Metals Using Bioavailability-Based Approaches.

The primary goal of the present study is to provide a broad view of best practices for evaluating bioavailability models for metals for use in the protection of aquatic life. We describe the state of the science regarding 1) the evaluation and selection of ecotoxicity data, 2) the selection of bioavailability models for use in normalization, and 3) subsequent application of bioavailability models. Although many examples of normalization steps exist worldwide, a scheme is proposed to evaluate and select a model that takes account of its representativeness (water chemistry and taxonomic coverage of the ecotoxicity data set) and validation performance. Important considerations for a suitable model are the quantity of inputs needed, accuracy, and ease of use, all of which are needed to set protective values for aquatic life and to use these values to evaluate potential risks to organisms in receiving waters. Although the end results of different model application approaches may be broadly similar, the differences in these application frameworks ultimately come down to a series of trade-offs between who needs to collect the data and use the bioavailability model, the different requirements of spatial scales involved (e.g., regional vs site-specific values), and model predictiveness and protectiveness. Ultimately, understanding the limits and consequences of these trade-offs allows for selection of the most appropriate model and application framework to best provide the intended levels of aquatic life protection. Environ Toxicol Chem 2019;39:118-130. © 2019 SETAC.

Framework for derivation of water quality criteria using the biotic ligand model: Copper as a case study.

Acceptance of the biotic ligand model (BLM) to derive aquatic life criteria, for metals in general and copper (Cu) in particular, is growing among regulatory agencies worldwide. Thus, it is important to ensure that water quality data are used appropriately and consistently in deriving such criteria. Here we present a suggested BLM implementation framework (hereafter referred to as "the Framework") to help guide the decision-making process when designing sampling and analysis programs for use of the BLM to derive water quality criteria applied on a site-specific basis. Such a framework will help inform stakeholders on the requirements needed to derive BLM-based criteria, and thus ensure that the appropriate types and amount of data are being collected and interpreted. The Framework was developed for calculating BLM-based criteria when data are available from multiple sampling locations on a stream. The Framework aspires to promote consistency when applying the BLM across data sets of disparate water quality, data quantity, and spatial and temporal representativeness and is meant to be flexible to maximize applicability over a wide range of scenarios. Therefore, the Framework allows for a certain level of interpretation and adjustment to address the issues unique to each data set. Integr Environ Assess Manag 2018;14:736-749. © 2018 SETAC.

Effects of copper on olfactory, behavioral, and other sublethal responses of saltwater organisms: Are estimated chronic limits using the biotic ligand model protective?

There is concern over whether regulatory criteria for copper (Cu) are protective against chemosensory and behavioral impairment in aquatic organisms. We compiled Cu toxicity data for these and other sublethal endpoints in 35 tests with saltwater organisms and compared the Cu toxicity thresholds with biotic ligand model (BLM)-based estimated chronic limits (ECL values, which are 20% effect concentrations [EC20s] for the embryo-larval life stage of the blue mussel [Mytilus edulis], a saltwater species sensitive to Cu that has historically been used to derive saltwater Cu criteria). Only 8 of the 35 tests had sufficient toxicity and chemistry data to support unequivocal conclusions (i.e., a Cu EC20 or no-observed-effect concentration could be derived, and Cu and dissolved organic carbon [DOC] concentrations were measured [or DOC concentrations could be inferred from the test-water source]). The BLM-based ECL values would have been protective (i.e., the ECL was lower than the toxicity threshold) in 7 of those 8 tests. In the remaining 27 tests, this meta-analysis was limited by several factors, including 1) the Cu toxicity threshold was a "less than" value in 19 tests because only a lowest-observed-effect concentration could be calculated and 2) Cu and/or DOC concentrations often were not measured. In 2 of those 27 tests, the ECL would not have been protective if based only on a conservatively high upper-bound DOC estimate. To facilitate future evaluations of the protectiveness of aquatic life criteria for metals, we urge researchers to measure and report exposure-water chemistry and test-metal concentrations that bracket regulatory criteria. Environ Toxicol Chem 2018;37:1515-1522. © 2018 SETAC.

Chronic toxicity of aluminum, at a pH of 6, to freshwater organisms: Empirical data for the development of international regulatory standards/criteria.

The chemistry, bioavailability, and toxicity of aluminum (Al) in the aquatic environment are complex and affected by a wide range of water quality characteristics (including pH, hardness, and dissolved organic carbon). Data gaps in Al ecotoxicology exist for pH ranges representative of natural surface waters (pH 6-8). To address these gaps, a series of chronic toxicity tests were performed at pH 6 with 8 freshwater species, including 2 fish (Pimephales promelas and Danio rerio), an oligochaete (Aeolosoma sp.), a rotifer (Brachionus calyciflorus), a snail (Lymnaea stagnalis), an amphipod (Hyalella azteca), a midge (Chironomus riparius), and an aquatic plant (Lemna minor). The 10% effect concentrations (EC10s) ranged from 98 µg total Al/L for D. rerio to 2175 µg total Al/L for L. minor. From these data and additional published data, species-sensitivity distributions (SSDs) were developed to derive concentrations protective of 95% of tested species (i.e., 50% lower confidence limit of a 5th percentile hazard concentration [HC5-50]). A generic HC5-50 (not adjusted for bioavailability) of 74.4 µg total Al/L was estimated using the SSD. An Al-specific biotic ligand model (BLM) was used to develop SSDs normalized for bioavailability based on site-specific water quality characteristics. Normalized HC5-50s ranged from 93.7 to 534 µg total Al/L for waters representing a range of European ecoregions, whereas a chronic HC5 calculated using US Environmental Protection Agency aquatic life criteria methods (i.e., a continuous criterion concentration [CCC]) was 125 µg total Al/L when normalized to Lake Superior water in the United States. The HC5-50 and CCC values for site-specific waters other than those in the present study can be obtained using the Al BLM. Environ Toxicol Chem 2018;37:36-48. © 2017 SETAC.

Evaluating the effects of pH, hardness, and dissolved organic carbon on the toxicity of aluminum to freshwater aquatic organisms under circumneutral conditions.

Although it is well known that increasing water hardness and dissolved organic carbon (DOC) concentrations mitigate the toxicity of aluminum (Al) to freshwater organisms in acidic water (i.e., pH < 6), these effects are less well characterized in natural waters at circumneutral pHs for which most aquatic life regulatory protection criteria apply (i.e., pH 6-8). The evaluation of Al toxicity under varying pH conditions may also be confounded by the presence of Al hydroxides and freshly precipitated Al in newly prepared test solutions. Aging and filtration of test solutions were found to greatly reduce toxicity, suggesting that toxicity from transient forms of Al could be minimized and that precipitated Al hydroxides contribute significantly to Al toxicity under circumneutral conditions, rather than dissolved or monomeric forms. Increasing pH, hardness, and DOC were found to have a protective effect against Al toxicity for fish (Pimephales promelas) and invertebrates (Ceriodaphnia dubia, Daphnia magna). For algae (Pseudokirchneriella subcapitata), the protective effects of increased hardness were only apparent at pH 6, less so at pH 7, and at pH 8, increased hardness appeared to increase the sensitivity of algae to Al. The results support the need for water quality-based aquatic life protection criteria for Al, rather than fixed value criteria, as being a more accurate predictor of Al toxicity in natural waters. Environ Toxicol Chem 2018;37:49-60. © 2017 SETAC.

Protectiveness of water quality criteria for copper in western United States waters relative to predicted olfactory responses in juvenile Pacific salmon.

Copper (Cu) can impair olfaction in juvenile Pacific salmon (as well as other fishes), thus potentially inhibiting the ability of juveniles to avoid predators or to find food. Because Cu is commonly elevated in stormwater runoff in urban environments, storm events may result in elevated Cu concentrations in salmon-bearing streams. Accordingly, there is concern that existing Cu criteria, which were not derived using data for olfactory-related endpoints, may not be adequately protective of juvenile salmon. However, a modification of the US Environmental Protection Agency (USEPA) biotic ligand model (BLM) for deriving site-specific Cu criteria was recently proposed, which accounted for the sensitivity of olfactory endpoints. The modification was based on olfactory inhibition in juvenile coho salmon (Oncorhynchus kisutch) exposed to Cu in various combinations of pH, hardness, alkalinity, and dissolved organic carbon (DOC) concentrations. We used that olfactory-based BLM to derive 20% inhibition concentrations (IC20) values for Cu for 133 stream locations in the western United States. The olfactory BLM-based IC20 values were compared to the existing hardness-based Cu criteria and the USEPA's BLM-based Cu criteria for these representative natural waters of the western United States. Of the 133 sampling locations, mean hardness-dependent acute and chronic Cu criteria were below the mean olfactory-based BLM IC20 value in 122 (92%) and 129 (97%) of the waters, respectively (i.e., <20% olfactory impairment would have been predicted at the mean hardness-based Cu criteria concentrations). Waters characterized by a combination of high hardness and very low DOC were most likely to have hardness-based Cu criteria that were higher than the olfactory-based BLM IC20 values, because DOC strongly influences Cu bioavailability in the BLM. In all waters, the USEPA's current BLM-based criteria were below the mean olfactory-based BLM IC20 values, indicating that the USEPA's BLM-based criteria are protective of olfactory impairment in juvenile salmon.

Meeting the challenge of identifying persistent pollutants at the state level.

In 2007, the State of Oregon enacted legislation aimed at identifying persistent pollutants that could pose a threat to waters of the State and then reducing their discharge by means of a comprehensive pollution prevention program. This legislation defined a persistent pollutant as one that is toxic and persistent or bioaccumulative; a broad definition that required evaluation of an extensive number and variety of chemicals. The Oregon Department of Environmental Quality, in consultation with a science workgroup, implemented a 12-step process for identifying and prioritizing persistent pollutants consistent with this definition. This process is characterized by (a) maximum overall transparency in its conduct, including extensive public involvement, (b) 3 levels of objective and predefined criteria for categorization of a chemical as a persistent pollutant, (c) full disclosure of values and sources for all physicochemical data used for comparison with these criteria, and (d) clear acknowledgement when a chemical was identified as a persistent pollutant for reasons other than these criteria alone. This process was used to identify those chemicals relevant as persistent pollutants and to then prioritize them in terms of their relative ability to adversely impact waters of the state, with special emphasis on impacts to aquatic receptors. An initial list of 2130 chemicals was compiled from existing lists. Criteria for toxicity, persistence, and bioaccumulative potential were defined and then used with 2 different chemical property evaluation models (PBT Profiler and EPISuite) to produce a final list of 118 chemicals. The final list includes several legacy pollutants but also contains numerous current-use pharmaceuticals, personal care products, and pesticides, approximately half of which appear only once or not at all on lists compiled by others. Although it drew from the experience of others, assembling this list proved to be an exemplar of science in the service of policy.

Shipboard trials of an ozone-based ballast water treatment system.

Legislation introduced by the United Nations International Maritime Organization (IMO) has focused primarily on standards defining successful treatments designed to remove invasive species entrained in ballast water. An earlier shipboard study found that ozone introduced into salt water ballast resulted in the formation of bromine compounds, measured as total residual oxidants (TRO) that were toxic to both bacteria and plankton. However, the diffuser system employed to deliver ozone to the ballast water tanks resulted in patchiness in TRO distribution and toxicity to entrained organisms. In this follow-up study, the shipboard diffuser system was replaced by a single Venturi-type injection system designed to deliver a more homogeneous biocide distribution. Within-tank variability in TRO levels and associated toxicity to zooplankton, phytoplankton and marine bacteria was measured via a matrix of tubes deployed to sample different locations in treated and untreated (control) tanks. Three trials were conducted aboard the oil tanker S/T Prince William Sound in the Strait of Juan de Fuca off Port Angeles, Washington State, USA, between June and December 2007. Mortalities of plankton and bacteria and oxidant concentrations were recorded for treated and untreated ballast water up to 3days following treatment, and residual toxicity beyond this period was measured by bioassay of standard test organisms. Results indicated uniform compliance with current IMO standards, but only partial compliance with other existing and pending ballast water legislation.

Evaluation of the Biotic Ligand Model relative to other site-specific criteria derivation methods for copper in surface waters with elevated hardness.

The goal of this study was to evaluate the reliability of the Biotic Ligand Model to predict Cu toxicity in very hard surface water (>200 mg/L as CaCO(3)), relative to current copper criteria methodologies (hardness-based equation and the water-effect ratio; WER). To test these methods, we conducted acute Cu toxicity tests with three aquatic test species (Ceriodaphnia dubia, Daphnia pulex and Pimephales promelas) in seven surface waters. The sites were representative of effluent-dependent or effluent-dominated streams common to the arid western United States of America (arid West) and a wide range of water quality variables were tested. In addition, concurrent Cu toxicity tests were conducted in laboratory waters that were matched to hardness and alkalinity of the sites to facilitate calculation of WER values. Results were used to characterize empirical relationships between water quality characteristics and Cu toxicity, and to compare measured Cu toxicity with Biotic Ligand Model (BLM) predictions. Acute toxicity tests were also conducted with C. dubia and P. promelas in a range of Ca or Mg-dominated hardness concentrations to determine the independent effects of Ca or Mg on Cu toxicity at high hardness levels. Conclusions from this study suggest that the BLM generates appropriate criteria for the waters tested in this study when compared to the hardness-based equation or WER approach. Although the historical site-specific methods are useful for surface waters with hardness < or = 250 mg/L as CaCO(3), the unique conditions of arid West streams require site-specific methods that account for the influences of critical water quality variables (i.e., pH, dissolved organic carbon, alkalinity, Ca, Mg and Na). Therefore, the BLM offers an improved alternative to the hardness-based and WER approaches, particularly for situations where the current methods would be under-protective of sensitive aquatic life.

Toxicity of ozonated seawater to marine organisms.

Ballast water transport of nonindigenous species (NIS) is recognized as a significant contributor to biological invasions and a threat to coastal ecosystems. Recently, the use of ozone as an oxidant to eliminate NIS from ballast while ships are in transit has been considered. We determined the toxicity of ozone in artificial seawater (ASW) for five species of marine organisms in short-term (< or = 5 h) batch exposures. Larval topsmelt (Atherinops affinis) and juvenile sheepshead minnows (Cyprinodon variegatus) were the most sensitive to oxidant exposure, and the mysid shrimp (Americamysis bahia) was the most sensitive invertebrate. Conversely, benthic amphipods (Leptocheirus plumulosus and Rhepoxinius abronius) were the least sensitive of all species tested. Mortality from ozone exposure occurred quickly, with median lethal times ranging from 1 to 3 h for the most sensitive species, although additional mortality was observed 1 to 2 d following ozone exposure. Because ozone does not persist in seawater, toxicity likely resulted from bromide ion oxidation to bromine species (HOBr and OBr-), which persist as residual toxicants after at least 2 d of storage. Total residual oxidant (TRO; as Br2) formation resulting from ozone treatment was measured in ASW and four site-specific natural seawaters. The rate of TRO formation correlated with salinity, but dissolved organic carbon and total dissolved nitrogen did not affect TRO concentrations. Acute toxicity tests with each water over 48 h using mysid shrimp, topsmelt, and sheepshead minnows yielded results similar to those of batch exposure. Addition of sodium thiosulfate (Na2S2O3) to ozonated waters resulted in TRO elimination and survival of all organisms. Our results provide necessary information for the optimization of an efficacious ozone ballast water treatment system.

Effect of culture water hardness on the sensitivity of Ceriodaphnia dubia to copper toxicity.

We examined whether the sensitivity of Ceriodaphnia dubia to copper toxicity was influenced by the hardness of the water in which they were reared or in which they were exposed. Organisms cultured in very hard water were 1.5-fold less sensitive to copper than those in moderately hard water. However, the hardness of the exposure water had a greater (2.5-fold) effect on copper median effective concentration (EC50s).

Creosote toxicity to photosynthesis and plant growth in aquatic microcosms.

To assess photosynthesis as a bioindicator of toxicity from polycyclic aromatic hydrocarbons (PAHs), the response of chlorophyll-a fluorescence to creosote exposure was compared with effects on population-level plant growth. Large, outdoor, freshwater microcosms containing Eurasian watermilfoil (Myriophyllum spicatum) received either a single application or multiple applications of liquid creosote at nominal concentrations from 0.109 to 32.7 mg L(-1). For several weeks following treatment, photosynthetic electron transport was measured using pulse amplitude-modulated chlorophyll-a fluorescence. The maximum efficiency of photosystem II electron transport (Fv/Fm) and the quantum yield of photochemistry (deltaF/F'm) were diminished in plants shortly after the addition of creosote. In microcosms that received a single treatment of creosote only, the 50% effective concentrations (EC50s), expressed as the aqueous concentration of 15 of the most abundant PAHs, were 0.28 mg L(-1) for Fv/Fm and 0.30 mg L(-1) for deltaF/F'm. Chlorophyll-a fluorescence was diminished to a greater extent in microcosms that received multiple treatments of creosote, with EC50s of 0.13 mg L(-1) for Fv/Fm and 0.10 mg L(-1) for deltaF/F'm. Plant biomass accumulation was inhibited in a concentration-dependent manner in all microcosms treated with creosote, but this inhibition occurred to a greater degree in microcosms treated with multiple creosote applications. The response of chlorophyll-a fluorescence, measured only 8 d after creosote treatment, was similar to plant growth over the entire growing season, indicating that this technique can be used to estimate potential effects of contaminants before detrimental impacts on populations.

The biotic ligand model: a historical overview.

During recent years, the biotic ligand model (BLM) has been proposed as a tool to evaluate quantitatively the manner in which water chemistry affects the speciation and biological availability of metals in aquatic systems. This is an important consideration because it is the bioavailability and bioreactivity of metals that control their potential to cause adverse effects. The BLM approach has gained widespread interest amongst the scientific, regulated and regulatory communities because of its potential for use in developing water quality criteria (WQC) and in performing aquatic risk assessments for metals. Specifically, the BLM does this in a way that considers the important influences of site-specific water quality. This journal issue includes papers that describe recent advances with regard to the development of the BLM approach. Here, the current status of the BLM development effort is described in the context of the longer-term history of advances in the understanding of metal interactions in the environment upon which the BLM is based. Early developments in the aquatic chemistry of metals, the physiology of aquatic organisms and aquatic toxicology are reviewed first, and the degree to which each of these disciplines influenced the development of water quality regulations is discussed. The early scientific advances that took place in each of these fields were not well coordinated, making it difficult for regulatory authorities to take full advantage of the potential utility of what had been learned. However, this has now changed, with the BLM serving as a useful interface amongst these scientific disciplines, and within the regulatory arena as well. The more recent events that have led to the present situation are reviewed, and consideration is given to some of the future needs and developments related to the BLM that are envisioned. The research results that are described in the papers found in this journal issue represent a distinct milestone in the ongoing evolution of the BLM approach and, more generally, of approaches to performing ecological assessments for metals in aquatic systems. These papers also establish a benchmark to which future scientific and regulatory developments can be compared. Finally, they demonstrate the importance and usefulness of the concept of bioavailability and of evaluative tools such as the BLM.

Evaluating the role of ion composition on the toxicity of copper to Ceriodaphnia dubia in very hard waters.

The mitigating effect of increasing hardness on metal toxicity is reflected in water quality criteria in the United States over the range of 25-400 mgl(-1) (as CaCO(3)). However, waters in the arid west of the US frequently exceed 400 mgl(-1) hardness, and the applicability of hardness-toxicity relationships in these waters is unknown. Acute toxicity tests with Ceriodaphnia dubia were conducted at hardness levels ranging from approximately 300 to 1,200 mgl(-1) using reconstituted waters that mimic two natural waters with elevated hardness: (1) alkaline desert southwest streams (Las Vegas Wash, NV), and (2) low alkalinity waters from a CaSO(4)-treated mining effluent in Colorado. The moderately-alkaline EPA synthetic hard water was also included for comparison. Copper toxicity did not consistently vary as a function of hardness, but likely as a function of other water quality characteristics (e.g., alkalinity or other correlated factors). The hardness equations used in regulatory criteria, therefore, may not provide an accurate level of protection against copper toxicity in all types of very hard waters. However, the mechanistic Biotic ligand model generally predicted copper toxicity within +/-2X of observed EC(50) values, and thus may be more useful than hardness for modifying water quality criteria.