A Call for Gene Expression Analysis in Whole Blood of Patients With Rheumatoid Arthritis (RA) as a Biomarker for RA-Associated Interstitial Lung Disease.

OBJECTIVE: Rheumatoid arthritis (RA)-associated interstitial lung disease (ILD) is one of the most common and prognostic organ manifestations of RA. Therefore, to allow effective treatment, it is of crucial importance to diagnose RA-ILD at the earliest possible stage. So far, the gold standard of early detection has been high-resolution computed tomography (HRCT) of the lungs. This procedure involves considerable radiation exposure for the patient and is therefore unsuitable as a routine screening measure for ethical reasons. Here, we propose the analysis of characteristic gene expression patterns as a biomarker to aid in the early detection and initiation of appropriate, possibly antifibrotic, therapy. METHODS: To investigate unique molecular patterns of RA-ILD, whole blood samples were taken from 12 female patients with RA-ILD (n = 7) or RA (n = 5). The RNA was extracted, sequenced by RNA-Seq, and analyzed for characteristic differences in the gene expression patterns between patients with RA-ILD and those with RA without ILD. RESULTS: The differential gene expression analysis revealed 9 significantly upregulated genes in RA-ILD compared to RA without ILD: arginase 1 (ARG1), thymidylate synthetase (TYMS), sortilin 1 (SORT1), marker of proliferation Ki-67 (MKI67), olfactomedin 4 (OLFM4), baculoviral inhibitor of apoptosis repeat containing 5 (BIRC5), membrane spanning 4-domains A4A (MS4A4A), C-type lectin domain family 12 member A (CLEC12A), and the long intergenic nonprotein coding RNA (LINC02967). CONCLUSION: All gene products of these genes (except for LINC02967) are known from the literature to be involved in the pathogenesis of fibrosis. Further, for some, a contribution to the development of pulmonary fibrosis has even been demonstrated in experimental studies. Therefore, the results presented here provide an encouraging perspective for using specific gene expression patterns as biomarkers for the early detection and differential diagnosis of RA-ILD as a routine screening test.

Effect of Fractal Topology on the Resistivity Response of Thin Film Sensors.

We discuss the effect of topological inhomogeneity of very thin metallic conductometric sensors on their response to external stimuli, such as pressure, intercalation, or gas absorption, that modify the material's bulk conductivity. The classical percolation model was extended to the case in which several independent scattering mechanisms contribute to resistivity. The magnitude of each scattering term was predicted to grow with the total resistivity and diverge at the percolation threshold. We tested the model experimentally using thin films of hydrogenated palladium and CoPd alloys where absorbed hydrogen atoms occupying the interstitial lattice sites enhance the electron scattering. The hydrogen scattering resistivity was found to grow linearly with the total resistivity in the fractal topology range in agreement with the model. Enhancement of the absolute magnitude of the resistivity response in the fractal range thin film sensors can be particularly useful when the respective bulk material response is too small for reliable detection.

[Consensus guideline on the interdisciplinary diagnosis of interstitial lung diseases]. / S1-Leitlinie Interdisziplinäre Diagnostik interstitieller Lungenerkrankungen im Erwachsenenalter.

The evaluation of a patient with interstitial lung disease (ILD) includes assessment of clinical, radiological, and often histopathological data. As there were no specific recommendations to guide the evaluation of patients under the suspicion of an ILD within the German practice landscape, this position statement from an interdisciplinary panel of ILD experts provides guidance related to the diagnostic modalities which should be used in the evaluation of ILD. This includes clinical assessment rheumatological evaluation, radiological examinations, histopathologic sampling and the need for a final discussion in a multidisciplinary team.

Low-Cost Probabilistic 3D Denoising with Applications for Ultra-Low-Radiation Computed Tomography.

We propose a pipeline for synthetic generation of personalized Computer Tomography (CT) images, with a radiation exposure evaluation and a lifetime attributable risk (LAR) assessment. We perform a patient-specific performance evaluation for a broad range of denoising algorithms (including the most popular deep learning denoising approaches, wavelets-based methods, methods based on Mumford−Shah denoising, etc.), focusing both on accessing the capability to reduce the patient-specific CT-induced LAR and on computational cost scalability. We introduce a parallel Probabilistic Mumford−Shah denoising model (PMS) and show that it markedly-outperforms the compared common denoising methods in denoising quality and cost scaling. In particular, we show that it allows an approximately 22-fold robust patient-specific LAR reduction for infants and a 10-fold LAR reduction for adults. Using a normal laptop, the proposed algorithm for PMS allows cheap and robust (with a multiscale structural similarity index >90%) denoising of very large 2D videos and 3D images (with over 107 voxels) that are subject to ultra-strong noise (Gaussian and non-Gaussian) for signal-to-noise ratios far below 1.0. The code is provided for open access.

Aerosol exposure of staff during dental treatments: a model study.

BACKGROUND: Due to exposure to potentially infectious aerosols during treatments, the dental personnel is considered being at high risk for aerosol transmitted diseases like COVID-19. The aim of this study was to evaluate aerosol exposure during different dental treatments as well as the efficacy of dental suction to reduce aerosol spreading. METHODS: Dental powder-jet (PJ; Air-Flow®), a water-cooled dental handpiece with a diamond bur (HP) and water-cooled ultrasonic scaling (US) were used in a simulation head, mounted on a dental unit in various treatment settings. The influence of the use of a small saliva ejector (SE) and high-volume suction (HVS) was evaluated. As a proxy of aerosols, air-born particles (PM10) were detected using a Laser Spectrometer in 30 cm distance from the mouth. As control, background particle counts (BC) were measured before and after experiments. RESULTS: With only SE, integrated aerosol levels [median (Q25/Q75) µg/m3 s] for PJ [91,246 (58,213/118,386) µg/m3 s, p < 0.001, ANOVA] were significantly increased compared to BC [7243 (6501/8407) µg/m3 s], whilst HP [11,119 (7190/17,234) µg/m3 s, p > 0.05] and US [6558 (6002/7066) µg/m3 s; p > 0.05] did not increase aerosol levels significantly. The use of HVS significantly decreased aerosol exposure for PJ [37,170 (29,634/51,719) µg/m3 s; p < 0.01] and HP [5476 (5066/5638) µg/m3 s; p < 0.001] compared to SE only, even reaching lower particle counts than BC levels for HP usage (p < 0.001). CONCLUSIONS: To reduce the exposure to potentially infectious aerosols, HVS should be used during aerosol-forming dental treatments.

Role of anti-phase boundaries in the formation of magnetic domains in magnetite thin films.

Anti-phase boundaries (APBs) are structural defects which have been shown to be responsible for the anomalous magnetic behavior observed in different nanostructures. Understanding their properties is crucial in order to use them to tune the properties of magnetic materials by growing APBs in a controlled way since their density strongly depends on the synthesis method. In this work we investigate their influence on magnetite (Fe3O4) thin films by considering an atomistic spin model, focussing our study on the role that the exchange interactions play across the APB interface. We conclude that the main atypical features reported experimentally in this material are well described by the model we propose here, confirming the new exchange interactions created in the APB as the responsible for this deviation from bulk properties.

Effective inter-organisational networks for Responsible Research and Innovation and global sustainability: a scoping review.

Background: Achieving the United Nations Sustainable Development Goals (SDGs) is beyond the capacity of any single organisation. The model for Responsible Research and Innovation (RRI) includes principles of engaging stakeholders and suggests that an engaged, multi-sectoral approach hold promise to mobilise humanity to solve complex and urgent global issues. Methods: This scoping review explores the characteristics of effective and sustainable inter-organisational networks for fostering RRI in service of the SDGs. An inductive-deductive search of prior studies (1990-2020), with the exception of Benson's (1975) seminal work was conducted, which focused on strategies to initiate and maintain inter-organisational networks relevant to the implementation of RRI and/or SDGs. The search began with themes derived from prior network theory, focusing on: (a) the type and function of networks; (b) the aims and vision; and (c) the relationships between networks and network members. In total, 55 articles on inter-organisational network theory were included for the final analysis. Results: Results are reported under themes of: (1) Effectiveness, Sustainability, and Success; (2) Governance and Management; and (3) Network Relationship. Network structures, forms of management and funding are linked to sustainable networks. Potential threats include power imbalances within networks, and internal and external factors that may affect relationships at network and community levels. Few studies examine diversity or cultural viewpoints. Studies highlight the benefits of networks such as enhancing knowledge sharing among researchers, practitioners, and other stakeholders. Conclusions: The effectiveness of the managerial structure may be observed as outputs of the intention and values of an inter-organisational network. Our review demonstrates that a global inter-organisational network approach is achievable. Such a network would have many benefits, including allowing organisations to be responsive and flexible towards change and innovation. Keywords RRI, SDGs, network theory, inter-organisational networks, governance, trust.

Resistivity Testing of Palladium Dilution Limits in CoPd Alloys for Hydrogen Storage.

Palladium satisfies most of the requirements for an effective hydrogen storage material with two major drawbacks: it has a relatively low gravimetric hydrogen density and is prohibitively expensive for large scale applications. Pd-based alloys should be considered as possible alternatives to a pure Pd. The question is how much one can dilute the Pd concentration in a variety of candidate materials while preserving the hydrogen absorption capability. We demonstrate that the resistivity measurements of thin film alloy samples can be used for a qualitative high-throughput screening and study of the hydrogen absorbing properties over the entire range of palladium concentrations. Contrary to palladium-rich alloys where additional hydrogen scattering indicates a degree of hydrogen content, the diluted alloy films respond by a decrease in resistance due to their thickness expansion. Evidence of significant hydrogen absorption was found in thin CoPd films diluted to just 20% of Pd.

Evidence-based research impact praxis: Integrating scholarship and practice to ensure research benefits society.

Effective research impact development is essential to address global challenges. This commentary highlights key issues facing research impact development as a nascent professional field of practice. We argue that those working on research impact should take a strategic, 'evidence-based' approach to maximize potential research benefits and minimize potential harms. We identify key features of evidence-based good practice in the context of research impact work. This includes integrating relevant research and theory into professional decision-making, drawing on a diversity of academic disciplines offering pertinent insights. Such an integration of scholarship and practice will improve the capacity of research impact work to make a positive difference for society. Moving the focus of research impact work to earlier stages in the research and innovation process through stakeholder engagement and anticipatory research can also boost its effectiveness. The research impact evidence base should be combined with the right kind of professional capacities and practical experience to enhance positive impact. Such capacities need to be developed through relevant education and training, for example, in participatory methods and social inclusion. Such training for research impact work needs to forge strong links between research impact scholarship and practice. Finally, there is a need for improvements in the evidence base for research impact to make it more practically useful.

Kinetics of the Lattice Response to Hydrogen Absorption in Thin Pd and CoPd Films.

Hydrogen can penetrate reversibly a number of metals, occupy the interstitial sites and cause large expansion of the crystal lattice. The question discussed here is whether the kinetics of the structural response matches hydrogen absorption. We show that thin Pd and CoPd films exposed to a relatively rich hydrogen atmosphere (4% H2) inflate irreversibly, demonstrate the controllable shape memory, and duration of the process can be of orders of magnitude longer than hydrogen absorption. The dynamics of the out-of-equilibrium plastic creep are well described by the Avrami-type model of the nucleation and lateral domain wall expansion of the swelled sites.

Particulate matter emissions of four types of one cigarette brand with and without additives: a laser spectrometric particulate matter analysis of secondhand smoke.

OBJECTIVE: Inhaled particulate matter (PM) in secondhand smoke (SHS) is deleterious for smokers and non-smokers. Different additives in cigarettes might effect the amount of PM. This study aimed to assess the influence of additives on the PM emissions from different cigarette types in SHS. DESIGN: An experimental study of PM measuring in SHS of cigarettes without exposition of any person. METHOD: The concentrations of PM (PM10, PM2.5 and PM1) in SHS of four different types of cigarettes of the brand Lucky Strike, two types with additives (Original Red, Original Blue) and two types without additives (Straight Red, Straight Blue), in comparison to the reference cigarette 3R4F were analysed. An automatic environmental tobacco smoke emitter generated SHS in an enclosed space with a volume of 2.88 m3. PM was measured with a laser aerosol spectrometer (Grimm model 1.109). Afterwards, the measuring values of the four Lucky Strike brands and the reference cigarette were statistically evaluated and visualised. RESULTS: Lucky Strike Straight Blue, a cigarette type without additives and lower tar amount, showed 10% to 25% lower PM mean values compared with the other tested Lucky Strike products, but 21% (PM1) respectively 27% (PM2.5,PM10) higher mean values than the reference cigarette. The PM mean of all measured smoke-free baseline values (clean air) was 1.6 µg/m³. It increased up to about 1800 µg/m³ for the reference cigarette and up to about 3070 µg/m³ for the Lucky Strike Original Blue. CONCLUSIONS: The findings of this study show the massive increase of PM amount by smoking cigarettes in enclosed spaces and suggest that additives in tobacco products increase the PM amount in SHS. For validation, further comparative studies are necessary focusing on the comparison of the PM concentration of cigarettes with and without additives. IMPLICATIONS: Due to the exposure to SHS, 890 000 people die each year worldwide. PM in SHS endangers the health of both non-smokers and smokers. This study considers the effect of additives like aromatics and humectant agents in cigarettes on PM in SHS. Do additives in tobacco products increase the amount of PM?

[The gender gap in highest quality medical research - A scientometric analysis of the representation of female authors in highest impact medical journals]. / Der Gendergap in der medizinischen Spitzenforschung.

OBJECTIVE: The study aims to elucidate the state of gender equality in high-impact medical research, analyzing the representation of female authorships from January, 2008 to September, 2017. METHODS: 133 893 male and female authorships from seven high-impact medical journals were analyzed. The key methodology was the combined analysis of the relative frequency, odds ratio and citations of female authorships. The Prestige Index measures the distribution of prestigious authorships between the two genders. RESULTS: 35.0 % of all authorships and 34.3 % of the first, 36.1 % of the co- and 24.2 % of the last authorships were held by women. Female authors have an odds ratio of 0.97 (KI: 0.93 - 1.01) for first, 1.36 (KI: 1.32 - 1.40) for co- und 0.57 (KI: 0.54 - 0.60) for last authorships compared to male authors. The proportion of female authorships exhibits an annual growth of 1.3 % overall, with 0.5 % for first, 1.2 % for co-, and 0.8 % for last authorships. Women are underrepresented at prestigious authorship compared to men (Prestige Index = -0.38). The underrepresentation accentuates in highly competitive articles attracting the highest citation rates, namely, articles with many authors and articles that were published in highest-impact journals. Multi-author articles with male key authors are more frequently cited than articles with female key authors. The gender-specific differences in citation rates increase the more authors contribute to an article. Women publish fewer articles compared to men (39.6 % female authors are responsible for 35.0 % of the authorships) and are underrepresented at productivity levels of more than 1 article per author. Distinct differences at the country level were revealed. CONCLUSION: High impact medical research is characterized by few female group leaders as last authors and many female researchers being first or co-authors early in their career. It is very likely that this gender-specific career dichotomy will persistent in the next decade.

Fit to play: posture and seating position analysis with professional musicians - a study protocol.

BACKGROUND: Musical performance-associated musculoskeletal disorders (MSD) are a common health problem among professional musicians. Considering the manifold consequences arising for the musicians, they can be seen as a threat for their professional activity. String players are the most affected group of musicians in this matter. Faults in upper body posture while playing the instrument, causing un-ergonomic static strain on the back and unergonomic limp-movements, are a main reason for musculoskeletal disorders and pain syndromes. METHODS: A total of 66 professional musicians, divided into three groups, are measured. The division is performed by average duration of performance, intensity of daily exercise and professional experience. Video raster stereography, a three-dimensional analysis of the body posture, is used to analyse the instrument-specific posture. Furthermore the pressure distribution during seating is analysed. Measurements are performed because the musician is sitting on varying music chairs differing in structure and/or construction of the seating surface. The measurements take place in habitual seating position as well as during playing the instrument. RESULTS: To analyse the influence of different chairs, ANOVA for repeated measurements or Friedman-test is used, depending on normality assumptions. Comparison of posture between amateur musicians, students, and professional orchestral musicians is carried out the non-parametric Jonckheere-Terpstra-test. CONCLUSIONS: Our method attempts to give the musicians indications for the right music chair choice by analyzing the chair concepts, so that thereby preemptively MSD can be reduced or prevented.

Pulmonary Hypertension: Scientometric Analysis and Density-Equalizing Mapping.

Pulmonary hypertension (PH) is characterized by the increase of the mean pulmonary arterial pressure in the lung circulation. Despite the large number of experimental and clinical studies conducted on pulmonary hypertension, there is no comprehensive work that analyzed the global research activity on PH so far. We retrieved the bibliometric data of the publications on pulmonary hypertension for two periods from the Web of science database. Here, we set the first investigation period from 1900 to 2007 (t1) due to the cited half life of articles and the relating difficulties to interpret the citation parameters. The second evaluation period (t2) covers the time interval from 2008 onwards including the year 2015. The data were analyzed and processed to density-equalizing maps using the NewQIS platform. A total number of 18,986 publications were identified in t1 that come from 85 countries. The US published the highest number of publications (n = 7,290), followed by the UK, Germany, Japan and France. In t2 19,676 items could be found worked out by 130 countries. The raking started just the same with the USA as most publishing nation with 7,127 publications on PH, followed by the UK and Germany. Japan fell back on 6th place, whereas China came into view on the 5th position. Analyzing the average citation rate as a parameter for research quality, Mexico reached the highest value in t1 and Ireland in t2. While, the country specific h-index underlined the leading position of the US research in both evaluation periods again. The average number of international collaboration items was expanding from none in 1978 to 530 items in 2015 with the USA as the country with the highest number of collaboration articles. The present study is the first large scale density-equalizing mapping and scientometric analysis of global PH research activity. Our data draw a sketch of the global research architecture in this field, indicating a need for specific research programs in countries with a lower human development index.

High particulate matter emission from additive-free Natural American Spirit cigarettes.

BACKGROUND: Involuntary exposure to health-threatening environmental tobacco smoke (Combined Mainstream and Side-stream Smoke, CMSS) is a worldwide problem, causing premature death of thousands of people. CMSS consists of particulate matter (PM), one of the main sources of indoor air pollution. PM constitutes a considerable health risk for passive smokers. It is important to inform the public about brand-specific differences in CMSS-associated PM, especially in the case of brands without additives, which are therefore promoted as natural and less health-threatening. METHODS: Mean concentrations and the area under the curve of PM10, PM2.5 and PM1 generated by Natural American Spirit cigarettes without additives and the 3R4F standard research cigarette (University of Kentucky, USA) were measured, analyzed and compared with each other. An automatic environmental tobacco smoke emitter was used to smoke 100 cigarettes, 20 of each brand, according to a standardized smoking protocol. RESULTS: This study could show that CMSS-associated PM released from tobacco brands without additives, which are therefore promoted as natural and less harmful, are higher than expected. CONCLUSIONS: It is highly improbable that Natural American Spirit tobacco products are a less harmful choice-at least not for passive smokers as this study could show. We conclude, the CMSS-associated PM level of every single customized brand should be measured because the origin of the tobacco and not the amount of CO, tar and nicotine (given as product information) seem to be responsible for the brand-specific PM release. This data is urgently needed to adequately inform the public about CMSS-associated PM exposure and the related health risk especially for passive smokers.

Snakebite Envenoming - A Combined Density Equalizing Mapping and Scientometric Analysis of the Publication History.

Estimates suggest that more than 25,000 to 125,000 people die annually from snakebite envenomation worldwide. In contrast to this major disease burden, thorough bibliometric studies do not exist so far that illustrate the overall research activity over a long time span. Therefore, the NewQIS-platform conducted an analysis on snakebite envenoming using the Thomson Reuters database Web of Science. To determine and assess changes regarding the scientific activities and to specifically address the more recent situation we analyzed two time intervals (t). During the first time interval from 1900 to 2007 (t1) 13,015 publications (p) were identified. In the following period (2008-2016 = t2) 4,982 publications were identified by the same search strategy. They originate from 114 (t1) respectively 121 countries (t2), with the USA (p = 3518), Brazil (p = 1100) and Japan (p = 961) being most productive in the first period, and the USA (p = 1087), Brazil (p = 991) and China (p = 378) in the second period, respectively. Setting the publication numbers in relation to GDP/capita, Brazil leads with 92 publications per 10,000 Int$GDP/capita, followed by India with 79 publications per 10000 Int$GDP/capita (t1). Comparing the country's publication activity with the Human Development Index level indicates that the majority of the publications is published by highly developed countries. When calculating the average citation rates (citations per published item = CR) mainly European countries show the highest ranks: From 1900-2007 Sweden ranks first with a CR = 27, followed by the Netherlands (CR = 24.8), Switzerland (CR = 23), Spain, Austria and the USA (CR = 22). From 2008 to 2016 the highest rate achieves Switzerland with a value of 24.6, followed by Belgium (CR = 18.1), Spain (CR = 16.7), Costa Rica (CR = 14.9) and Netherlands (CR = 14). Compared with this, the USA was placed at rank 13 (CR = 9,5). In summary, the present study represents the first density-equalizing map projection and in-depth scientometric analysis of the global research output on snakebites and its venoms. So it draws a sketch of the worldwide publication architecture and indicates that countries with a high incidence of snakebites and a low economical level still need to be empowered in carrying out research in this area.

Particulate Matter in Second-Hand Smoke Emitted from Different Cigarette Sizes and Types of the Brand Vogue Mainly Smoked by Women.

Indoor air pollution with harmful particulate matter (PM) is mainly caused by cigarette smoke. Super-Slim-Size-Cigarettes (SSL) are considered a less harmful alternative to King-Size-Cigarettes (KSC) due to longer filters and relatively low contents. We ask if "Combined Mainstream and Sidestream Smoke" (CMSS)-associated PM levels of SSL are lower than of KSC and thus are potentially less harmful. PM concentrations in CMSS (PM10, PM2.5, and PM1) are measured from four cigarette types of the brand Vogue, using an "automatic-environmental-tobacco-smoke-emitter" (AETSE) and laser aerosol spectrometry: SSL-BLEUE, -MENTHE, -LILAS and KSC-La Cigarette and -3R4F reference. This analysis shows that SSL MENTHE emitted the highest amount of PM, and KSC-La Cigarette the lowest. 3R4F reference emitted PM in the middle range, exceeding SSL BLEUE and falling slightly below SSL LILAS. It emerged that PM1 constituted the biggest proportion of PM emission. The outcome shows significant type-specific differences for emitted PM concentrations. Our results indicate that SSL are potentially more harmful for passive smokers than the respective KSC. However, this study cannot give precise statements about the general influence of the size of a cigarette on PM. Alarming is that PM1 is responsible for the biggest proportion of PM pollution, since smaller particles cause more harmful effects.

Global architecture of gestational diabetes research: density-equalizing mapping studies and gender analysis.

OBJECTIVE: Gestational diabetes mellitus (GDM) is associated with substantial morbidity for mothers and their offspring. While clinical and basic research activities on this important disease grow constantly, there is no concise analysis of global architecture of GDM research. Hence, it was the objective of this study to assess the global scientific performance chronologically, geographically and in relation to existing research networks and gender distribution of publishing authors. STUDY DESIGN: On the basis of the New Quality and Quantity Indices in Science (NewQIS) platform, scientometric methods were combined with modern visualizing techniques such as density equalizing mapping, and the Web of Science database was used to assess GDM-related entries from 1900 to 2012. RESULTS: Twelve thousand five hundred four GDM-related publications were identified and analyzed. The USA (4295 publications) and the UK (1354 publications) dominated the field concerning research activity, overall citations and country-specific Hirsch-Index, which quantified the impact of a country's published research on the scientific community. Semi-qualitative indices such as country-specific citation rates ranked New Zealand and the UK at top positions. Annual collaborative publications increased steeply between the years 1990 and 2012 (71 to 1157 respectively). Subject category analysis pointed to a minor interest of public health issues in GDM research. Gender analysis in terms of publication authorship revealed a clear dominance of the male gender until 2005; then a trend towards gender equity started and the activity of female scientists grew visibly in many countries. The country-specific gender analysis revealed large differences, i.e. female scientists dominated the scientific output in the USA, whereas the majority of research was published by male authors in countries such as Japan. CONCLUSION: This study provides the first global sketch of GDM research architecture. While North-American and Western-European countries were dominating the GDM-related scientific landscape, a disparity exists in terms of research output between developed and low-resource countries. Since GDM is linked to considerable mortality and morbidity of mothers and their offspring and constitutes a tremendous burden for the healthcare systems in underserved countries, our findings emphasize the need to address disparities by fostering research endeavors, public health programs and collaborative efforts in these nations.

Are Filter-Tipped Cigarettes Still Less Harmful than Non-Filter Cigarettes?--A Laser Spectrometric Particulate Matter Analysis from the Non-Smokers Point of View.

BACKGROUND: Environmental tobacco smoke (ETS) is associated with human morbidity and mortality, particularly chronic obstructive pulmonary disease (COPD and lung cancer. Although direct DNA-damage is a leading pathomechanism in active smokers, passive smoking is enough to induce bronchial asthma, especially in children. Particulate matter (PM) demonstrably plays an important role in this ETS-associated human morbidity, constituting a surrogate parameter for ETS exposure. METHODS: Using an Automatic Environmental Tobacco Smoke Emitter (AETSE) and an in-house developed, non-standard smoking regime, we tried to imitate the smoking process of human smokers to demonstrate the significance of passive smoking. Mean concentration (C(mean)) and area under the curve (AUC) of particulate matter (PM2.5) emitted by 3R4F reference cigarettes and the popular filter-tipped and non-filter brand cigarettes "Roth-Händle" were measured and compared. The cigarettes were not conditioned prior to smoking. The measurements were tested for Gaussian distribution and significant differences. RESULTS: C(mean) PM2.5 of the 3R4F reference cigarette: 3911 µg/m³; of the filter-tipped Roth-Händle: 3831 µg/m³; and of the non-filter Roth-Händle: 2053 µg/m³. AUC PM2.5 of the 3R4F reference cigarette: 1,647,006 µg/m³·s; of the filter-tipped Roth-Händle: 1,608,000 µg/m³·s; and of the non-filter Roth-Händle: 858,891 µg/m³·s. CONCLUSION: The filter-tipped cigarettes (the 3R4F reference cigarette and filter-tipped Roth-Händle) emitted significantly more PM2.5 than the non-filter Roth-Händle. Considering the harmful potential of PM, our findings note that the filter-tipped cigarettes are not a less harmful alternative for passive smokers. Tobacco taxation should be reconsidered and non-smoking legislation enforced.

Pancreatitis: Global Research Activities and Gender Imbalances: A Scientometric Approach Using Density-Equalizing Mapping.

OBJECTIVE: Despite the high impact of acute and chronic pancreatitis on the global burden of disease, no scientometric evaluation in this research field has yet been conducted. Therefore, we have issued an analysis in the field of pancreatitis research covering the past 112 years. METHODS: Data were retrieved from the Web of Science database. Density-equalizing mapping and large-scale data analysis were used to visualize bilateral and multilateral research cooperation. RESULTS: Finland is the only 1 of the 15 most productive countries showing a ratio in favor of female scientists. The United States is the most productive supplier with 24.1% of all publications. The most successful international cooperation proved to be the one between the United States and Germany. Although the United States holds the highest h-index, Switzerland obtains by far the highest citation rate. China, Russia, and India show only little international cooperation, given their scientific productivity. CONCLUSIONS: For the benefit of scientific progress, more countries with considerable numbers of patients should contribute to international collaborations and female researchers should be encouraged and supported.