Effect of suprascapular nerve injury on rotator cuff enthesis.

BACKGROUND: Numerous reports have shown that retracted rotator cuff tears may cause suprascapular nerve injury, and nerve injury causes atrophy and fat accumulation in the rotator cuff muscles. However, the effect of suprascapular nerve injury on rotator cuff enthesis has not been directly defined. This study aimed to investigate the effect of suprascapular nerve injury on rotator cuff enthesis. METHODS: Twenty-four Wistar albino rats underwent bilateral transection of the suprascapular nerve. Additional 6 rats were used as the sham group. Bilateral supraspinatus and infraspinatus entheses were examined after 1, 4, 8, and 12 weeks of nerve transection. Histomorphometric analyses were performed for each zone of enthesis. RESULTS: Compared with normal enthesis, significant and consistent decrease in cellularity were observed in the tendon and bone at all time points (P < .001). Collagen bundle diameter in the tendon also decreased in a similar manner (P < .001). Apart from the tendon and bone zones, fibrocartilage and calcified fibrocartilage zones showed similar response, and significant decrease in cellularity was observed 8 weeks after nerve transection (P < .001). CONCLUSION: This study identifies suprascapular nerve injury as an underlying mechanism leading to compromise of the rotator cuff enthesis structure. Suprascapular nerve injury may be considered as an etiologic factor for the impaired healing after repair of a massive tear.

Low pH irrigation fluids have positive effect on intra-articular chondral healing.

PURPOSE: The aim of this study was to evaluate the effect of Ringer's lactate (RL) solutions with different pH values on early histologic healing in a microfracture model in vivo. The null hypothesis of the presented study is that irrigation fluids with lower pH (6.4) have negative effects on fibrous cartilage healing. METHODS: Eighteen Wistar albino rats were randomly divided into three groups. Anterior midline incision was performed. Microfracture procedure was performed with a 1.2 mm k-wire at the lateral femoral condyle of each knee. the skin was sutured and joints were irrigated for 30 min with low pH (6.4) RL in Group 1, high pH (7.6) RL in Group 2 and no irrigation in Group 3. Three rats from each group were randomly selected and killed on the 3rd and 7th day. On the 3rd day, the healed chondral area was examined. On the 3rd and 7th day, the chondral depth and morphology were evaluated. On the 7th day, bone cellularity was assessed with osteoblast; osteoclast number and bone quality were evaluated with trabecular area and the number of trabeculae. RESULTS: Chondral healing area on the 3rd day was significantly higher in Group 1 compared to other groups. Chondral morphology was also qualitatively superior in Group 1 compared to other groups on the 3rd and 7th day. There were no differences in chondral depths between the groups on the 3rd day; however, increased chondral depths were observed in Group 1 on the 7th day. There were statistically significant increases in trabecular area and the number of trabeculae, as well as the number of osteoblasts and osteoclasts in Group 1 on the 7th day. CONCLUSIONS: The presented study revealed that low pH irrigation fluids have positive effects on the healing characteristics of intra-articular fibrous cartilage after microfracture procedure in vivo. In light of this study, we can assume that lower pH solutions could be safely used during microfracture procedures and it can also facilitate intra-articular fibrous cartilage formation and cartilage healing. Selection of irrigation solution is also important for intra-articular fibrous cartilage healing after microfracture procedure in vivo.

Completion repair exhibits increased healing characteristics compared with in situ repair of partial thickness bursal rotator cuff tears.

PURPOSE: Little information is available regarding the healing capacity of in situ and completion repair for the treatment of partial thickness rotator cuff tears. The purpose of the study was to analyze the healing characteristics of both techniques. METHODS: Twenty-four adult Sprague-Dawley rats were operated. Partial thickness bursal side tears were created bilaterally at the supraspinatus tendons. Additional 6 rats were used as the sham group. The right shoulders were repaired in situ, and the left shoulders were repaired using the tear completion technique on the 10th day after detachment surgery. Rats were sacrificed on the 10th and 30th days after repair surgery. Type I collagen, the TNF-α concentrations, the number and diameter of fibroblasts, and neovascularization were examined at two different time points. RESULTS: The collagen concentration (ng/mg total protein) was significantly increased in both groups at T1 and decreased in the in situ group, whereas completion repair continued to increase at T2 (P < 0.05). The mean fibroblast diameter in the completion repair group continued to increase at both time points (P < 0.05). Neovascularization was significantly increased with tear completion compared with in situ repair (P < 0.05) at T1. No significant (n.s.) differences regarding the TNF-α concentration (pg/mg total protein) were noted for both surgical techniques at T2 (P > 0.05). CONCLUSION: Despite the concerns of detaching the intact tendon, the completion repair technique exhibited increased healing characteristics compared with the in situ technique. The reason for this finding might be the refreshing effect of debridement at the chronic degenerated tendon that could improve the healing response.

Complications during removal of stainless steel versus titanium nails used for intramedullary nailing of diaphyseal fractures of the tibia.

OBJECTIVES: Intramedullary nailing is the treatment of choice for fractures of the tibial shaft, which might necessitate the nail removal due to complications in the long-term. Although considered as a low-risk procedure, intramedullary nail removal is also associated with certain complications. Here, we compared the most commonly used stainless steel and titanium nails with respect to the complications during removal and clinical outcome for intramedullary nailing of diaphyseal fractures of the tibia. PATIENTS AND METHODS: Sixty-two patients (26 females, 36 males) were included in this retrospective study. Of the removed nails, 24 were of stainless steel and 38 of titanium. Preoperative and intraoperative parameters, such as implant discomfort, anterior knee pain, operating time and amount of bleeding, and postoperative outcomes were evaluated for each patient. RESULTS: Titanium nail group had more, but not statistically significant, intraoperative complications than stainless steel group during the removal of nails (p = .4498). Operating time and amount of intraoperative bleeding were significantly higher in titanium group than stainless steel group (p = .0306 and p < .001, respectively). Preoperative SF-36 physical component and KSS scores were significantly lower in patients who had removal of titanium nails than those of stainless steel nails, whereas there was no difference in terms of postoperative SF-36 and KSS scores. CONCLUSION: In conclusion, although greater bone contact with titanium increases implant stability, nail removal is more difficult, resulting in more longer surgical operation and more intraoperative bleeding. Therefore, we do not recommend titanium nail removal in asymptomatic patients.

Palmaris longus tendon graft versus modified Weaver-Dunn procedure via dynamic button system for acromioclavicular joint reconstruction in chronic cases.

BACKGROUND: The hypothesis of this clinical study was that coracoclavicular (CC) reconstruction using autogenic palmaris longus graft through the GraftRope (PLG) system (Arthrex, Inc., Naples, FL, USA) would provide superior clinical and radiologic results compared with modified Weaver-Dunn procedure with the dynamic TightRope (Arthrex, Inc.) system (WDT). METHODS: Between 2008 and 2013, 32 patients (average age, 39.7 years; range, 22-60 years) underwent surgical reconstruction of chronic acromioclavicular (AC) joint dislocation. A modified WDT procedure was performed in 16 patients and autogenous PLG was performed in the other 16 patients. Patient data were collected retrospectively, with a final follow-up of 44.9 months (range, 29-60 months). The degree of AC joint displacement was evaluated by measuring the CC distance on the anteroposterior and axillary view. Clinical and functional outcomes were compared by American Shoulder and Elbow Surgeons and the Constant scores at final follow-up. RESULTS: Comparison between the WDT and PLG groups showed a significantly better outcome in the American Shoulder and Elbow Surgeons and the Constant scores (P < .01), in favor of the PLG group. Both groups showed an increased CC distance compared with the uninjured side, with a mean difference of 1.1 mm for the PLG and 3.3 mm for the WDT groups. A tolerable loss of reduction within the follow-up time was observed. Reduction loss was higher with the WDT group (P < .05). CONCLUSION: CC palmaris longus tendon graft reconstruction with GraftRope system was associated with functional and radiologic benefits. The palmaris longus graft with GraftRope system could be used in chronic cases.

Are pelvic anatomical structures in danger during arthroscopic acetabular labral repair? Definition of safe bone depth.

PURPOSE: The purpose of this study was to evaluate safe depth for suture anchor insertion during acetabular labral repair and to determine the neighbouring structures at risk during drilling and anchor insertion. METHODS: Ten human cadaveric hips (six males and four females) were obtained. Acetabular labral surface was prepared and marked for right hips as 12, 1 and 3 o'clock positions, for left hips 12, 11 and 9 o'clock positions. Those were defined as anterior, anterior-superior and superior zones, respectively. These labral positions were drilled at defined zones. After measurements, depth of the bone at 10° and 20° drill angles on zones was compared statistically. RESULTS: Acetabular bone widths at investigated labral insertion points did not statistically differ. A total of 14 injuries in 60 penetrations occurred (23.3 %) with free drill penetrations, and no injuries occurred with stopped drill penetrations. The bone depth was gradually decreasing from 10° to 20° drill angles and from anterior to superior inserting zones without significant importance. The risk of perforation to the pelvic cavity started with 20 mm drill depth, and the mean depth for all insertions was calculated as 31.7 mm (SD 2.6). CONCLUSIONS: It is anatomically possible that some pelvic structures sustain iatrogenic injury during acetabular drilling for anchor placement. Being aware of mean pelvic vault is important in which drilling after excessive pincer rim trimming could easily decrease the depth of acetabular bone without a standard. Careful drilling by using stopped drill bit is crucial to prevent iatrogenic injury.

The effect of femoral nerve block on fracture healing via expressions of growth factors and ß-catenin.

INTRODUCTION: Many patients of all ages are admitted to hospital due to bone fractures. The etiology of fracture has a very wide spectrum, ranging from motor accidents to pathological conditions such as tumors, osteoporosis, and others. Bone fracture healing is a well-programmed and well-organized process, but is also long and intractable. The outcome of this process is therefore affected by many factors, such as the patient's age, ethnicity, nutritional status, and extent of the fracture. At present, regional analgesic techniques are frequently applied in order to avoid the complications of systemic opioid administration, central block applications. Femoral block is one of the regional analgesic techniques frequently applied by anesthesiologists when the lower extremities are involved. In this study, we evaluated the effect of femoral nerve block on the healing of an experimental non-stabilized femur fracture via expression of TGF-ß, VEGF, and ß-catenin and bone histomorphometry in rats. MATERIAL AND METHODS: In the control group, only the femoral fracture was performed and the bone was not fixated, similarly as in other groups. In the One-Day Block group, a one-time femoral nerve block was applied after the femoral fracture. In the Three-Day Block group, a daily femoral nerve block was performed for three days after the femoral fracture. On Days 4, 7, and 13, femurs were excised. The bone sections were stained with hematoxylin-eosin to evaluate bone tissue and Safranin O to assess callus tissue, cartilaginous tissue, and new bone areas. TGF-ß, VEGF, and ß-catenin were assessed by immunohistochemistry. RESULTS: Histomorphometric analysis revealed that femoral block application had a positive impact on bone healing. TGF-ß expression in the One-Day and Three-Day Block Groups was significantly higher than in the control group at all times, as was also the case with VEGF expression. On day 13, ß-catenin expression was significantly higher in the Three-Day Block group than the others. CONCLUSIONS: The results of the study suggests that the applications of a femoral nerve block for perioperative analgesia, for either one day or three days, resulted in better and more rapid bone healing.

Fracture-dislocations of the proximal ulna.

OBJECTIVE: To investigate the relationship between injury patterns, complications, and the functional outcomes of patients with proximal-ulna fracture-dislocations. METHODS: Retrospective analysis of 15 patients (10 men, 5 women; mean age, 49.1 years; mean follow-up 49 months) with 6 anterior and 9 posterior fracture-dislocations of the proximal ulna. The proximal ulna was reconstructed with plates and screws in 13 patients and tension-band wiring in 2 patients. At the final follow-up, elbow range of motion (ROM) was measured and Mayo elbow scores (MEPS) were recorded. Broberg-Morrey criteria were used for osteoarthritis staging. RESULTS: Concomitant radial-head fracture was seen in all posterior fracture-dislocations. Four ligamentous injuries occurred in this group. All anterior dislocations had trochlear-notch fractures without associated injuries. Mean flexion ROM was 130.6° (100°-140°) and mean loss of extension ROM was 12.6° (0°-30°) in the study group. The mean MEPS score was 92.3 (70-100). Patients with posterior fracture-dislocations showed lower ROM and MEPS and higher level of osteoarthritis than patients with anterior fracture-dislocations. Recurrent dislocations occurred in 2 patients who had ulna fractures fixed with tension-band wiring. CONCLUSION: Radial-head fracture and ligamentous injury are specific components of posterior fracture-dislocations. The injury is limited to the trochlear notch in anterior fracture-dislocations. Posterior fracture-dislocations have lower functional outcomes. Proximal-ulna fractures should be fixed with rigid internal fixation (plate and screw) even if the fracture is a simple 2-part fracture.

Evaluation of absorbable and nonabsorbable sutures for repair of achilles tendon rupture with a suture-guiding device.

BACKGROUND: The purpose of this study was to compare the functional and clinical results of Achilles tendon repairs with an Achilles tendon suture-guiding device using nonabsorbable versus absorbable sutures. We hypothesized that the absorbable suture would have clinical results comparable to those of the nonabsorbable suture for Achilles tendon repair with an Achilles tendon suture-guiding system. METHODS: From January 2010 to September 2013, 48 consecutive patients who had sustained a spontaneous rupture of the Achilles tendon underwent operative repair with an Achilles tendon suture-guiding device using 2 different suture types. All ruptures were acute. The patients were divided equally into 2 groups according to suture type. In the nonabsorbable suture group, No. 2 braided nonabsorbable polyethylene terephthalate sutures were used, and in the absorbable suture group, braided absorbable polyglactin sutures were used. The average age of the patients was 38 years (range, 28-50 years). Functional outcome scores and complications were evaluated. RESULTS: All patients had an intact Achilles repair after surgery. The American Orthopaedic Foot & Ankle Society (AOFAS) hindfoot clinical outcome scores were 98 (range, 90-100) in the nonabsorbable suture group and 96.8 (range, 87-100) in the absorbable suture group. All patients returned to their previous work. The absorbable suture group had fewer postoperative complications (0%) than the nonabsorbable suture group (12.5%) (P < .05). CONCLUSION: Use of an absorbable suture in the treatment of Achilles tendon repair by an Achilles tendon suture-guiding system was associated with a lower incidence of suture reaction; however, functionally the results were not notably different from those using a traditional nonabsorbable suture. We conclude that repair with absorbable sutures is appropriate for Achilles tendon ruptures. LEVEL OF EVIDENCE: Level II, prospective comparative study.

Anatomic locking plate and coracoclavicular stabilization with suture endo-button technique is superior in the treatment of Neer Type II distal clavicle fractures.

INTRODUCTION: The purpose of this retrospective study was to compare the clinical results of three different fixation techniques for the treatment of Neer Type IIb fractures. We hypothesized that anatomic locking plate and coracoclavicular stabilization with suture endo-button technique provides more stable and biomechanically superior fixation among others with low complication rates. METHODS: Thirty six patients with Neer Type IIb fractures treated were evaluated. Patients were divided into three groups according to surgical choice that was performed: tension band and coracoclavicular suture stabilization with k-wires was defined as Group 1, anatomic locking plate and coracoclavicular stabilization with screw was defined as Group 2, and anatomic locking plate and coracoclavicular stabilization with suture endo-button (LPES) was defined as group 3. Mean age was 36.1 years, and mean follow-up period was 32.4 months. Radiological follow-ups and constant were recorded and compared at 3, 6, 12 and 24 months. RESULTS: At 3rd and 12th month follow-up in the LPES group, mean constant scores were statistically higher than other two groups (p < 0.01). The difference between other two groups was insignificant (p > 0.05). At 6th month follow-up, mean constant scores in LPES group were higher than other groups; there was less statistical significance than other time zones (p < 0.05). CONCLUSION: Anatomic locking plate combined with suture endo-button for CC ligament reinforcement is a reliable method to achieve osteosynthesis and stabilization for Neer Type IIb distal clavicle fractures without compromising physiology of shoulder.

The effect of organic silicon injection on Achilles tendon healing in rats.

OBJECTIVE: The aim of this study was to assess the efficacy of a soluble absorbable silicon compound on healing of the Achilles tendon. METHODS: The Achilles tendons of 21 Wistar albino rats were cut and repaired. A 0.01 ml organic silicon solution (silanol) was injected peri/intratendinously into the left leg of all rats and the same dose of saline into the right leg postoperatively. Rats were randomly divided into 3 groups for biomechanical testing on Day 10 (7 rats) and Day 20 (7 rats) and histological and immunohistochemical assessment on Day 20 (7 rats). Fibroblast cell count and diameter, tissue vascularity and blood vessel diameter were evaluated by histomorphometry. Basic fibroblast growth factor (bFGF) immunoreactivity was analyzed with immunohistochemistry on Day 20. Failure load and stiffness of the repaired tendons were measured on Days 10 and 20. RESULTS: The number of fibroblasts per area, average fibroblast diameter, number of vessels parallel to collagen bundles per area and average vessel diameter were significantly higher in the organic silicon group than in the control group (p<0.05). Strong immunoreactivity of bFGF in the silicon group was detected. Failure load was significantly higher in the silicon group than in the control group on Day 10 (p=0.041). On Day 20, while a difference still existed, this difference was not significant. There was no effect of the silicon injection on stiffness of healing tendons. CONCLUSION: Organic silicon appears to have a positive effect on tendon healing and is suitable for further studies on host healing response modification.

Comparative study of the closed reduction percutaneous cannulated screw fixation and open reduction palmar locking plate fixation in the treatment of AO type A2 distal radius fractures.

INTRODUCTION: The present study was designed to demonstrate the efficacy of standard 4.0 mm cannulated screw fixation by comparing it with palmar locking plate fixation in the treatment of acute, unstable, simple extra-articular distal radius fractures. MATERIALS AND METHODS: We prospectively collected and retrospectively analyzed outcomes data for 65 patients aged between 18 and 60 with AO type A2 fractures treated with closed reduction, percutaneous cannulated screw fixation (CRPCS n = 34) or open reduction palmar locking plate fixation (ORPLP n = 31). Range of motion, grip strength, Gartland-Werley and QuickDASH scores were compared at 2 months after surgery, and final follow-up (mean 32 months, range 12-90). Deterioration in radiographic parameters were measured and compared. Operative time and return to preinjury activity were evaluated. RESULTS: Parameters did not differ significantly between the groups at either time point with respect to grip strength or range of motion, except pronation and supination; they were better in the CRPCS group (p = 0.005 and 0.025, respectively) at 2 month follow-up. The Gartland-Werley and QuickDASH scores obtained at final follow-up were similar for each group and lacked statistical significance. Group comparison for the deterioration of radiologic parameters showed no significant difference. CRPCS group had significantly shorter operative time (p = 0.001) and there was no significant differences between the groups regarding the return to preinjury activity (p = 0.129). CONCLUSIONS: CRPCS group was found to be as successful as ORPLP group and it may be suitable in the case of young, active individuals with AO type A2 distal radius fractures.

Blocking screws for the treatment of distal femur fractures.

Intramedullary nailing is one of the most convenient biological options for treating distal femoral fractures. Because the distal medulla of the femur is wider than the middle diaphysis and intramedullary nails cannot completely fill the intramedullary canal, intramedullary nailing of distal femoral fractures can be difficult when trying to obtain adequate reduction. Some different methods exist for achieving reduction. The purpose of this study was determine whether the use of blocking screws resolves varus or valgus and translation and recurvatum deformities, which can be encountered in antegrade and retrograde intramedullary nailing. Thirty-four patients with distal femoral fractures underwent intramedullary nailing between January 2005 and June 2011. Fifteen patients treated by intramedullary nailing and blocking screws were included in the study. Six patients had distal diaphyseal fractures and 9 had distal diaphyseo-metaphyseal fractures. Antegrade nailing was performed in 7 patients and retrograde nailing was performed in 8. Reduction during surgery and union during follow-up were achieved in all patients with no significant complications. Mean follow-up was 26.6 months. Mean time to union was 12.6 weeks. The main purpose of using blocking screws is to achieve reduction, but they are also useful for maintaining permanent reduction. When inserting blocking screws, the screws must be placed 1 to 3 cm away from the fracture line to avoid from propagation of the fracture. When applied properly and in an adequate way, blocking screws provide an efficient solution for deformities encountered during intramedullary nailing of distal femur fractures.

Percutaneous cannulated screw fixation in the treatment of distal radius fractures.

PURPOSE: The aim of this study was to determine the results of closed reduction and percutaneous fixation of distal radial fractures with standard 4.0-mm cannulated screw. METHODS: We collected prospective outcomes data for 20 patients between 18 and 60 years of age (mean 39) with acute, displaced, extraarticular and unstable fractures of the distal radius treated with closed reduction, percutaneous cannulated screw fixation and early mobilization. The visits at months 2, 6 and 12 were specified as index follow-up visits and assessments of motion, grip strength and standard radiographs were performed. The Gartland Werley functional scores and the Disabilities of the Arm, Shoulder and Hand (QuickDASH) scores were recorded. RESULTS: Mean values of flexion, extension, pronation and supination on the injured side were up to 70 % of those on the uninjured side at 2 months postoperatively. By 12 months, range of motion values on the injured side showed continuous and significant improvement and flexion, extension, pronation, supination and ulnar deviation reached up to 90 % of those on the uninjured side. A large and significant improvement was seen from 2 to 6 months in the QuickDASH score. A smaller improvement was seen from 6 to 12 months, which was judged not to be significant. Radiographic values were close to anatomic parameters, and the alignment was maintained at 12 months follow-up. No complications occurred. CONCLUSIONS: Cannulated screw fixation appears to be an effective means of allowing immediate range of motion of the wrist, resulting in a rapid and comfortable functional recovery while maintaining alignment to bone healing.

Comparison of headless screws used in the treatment of proximal nonunion of scaphoid bone.

Screws with different levels of compression force are available for scaphoid fixation and it is known that the Acutrak screw generates greater compression than the Herbert screw. We retrospectively compared two types of headless compression screw for their effectiveness in the repair of scaphoid nonunion. Twenty-nine cases of proximal scaphoid nonunion were surgically treated with non-vascularised bone graft: the Acutrak screw was used in 17 patients and the cannulated Herbert screw in 12 patients. Wrist range of motion, Mayo wrist score, grip strength and QuickDASH scores were indicators used for the functional evaluation. Radiographic findings were assessed for consolidation of nonunion and signs of arthrosis. The mean follow-up time was 49.2 months (range 12-96). Statistically, there was no significant difference between the Acutrak and Herbert screw types in terms of functional evaluation and time required for consolidation. Greater compression did not influence the functional outcome, consolidation rate or time to consolidation. The need for greater compression in the treatment of proximal scaphoid nonunions is thus questionable because it may increase the risk of proximal fragment communition.

Comparison of palmar locking plate and K-wire augmented external fixation for intra-articular and comminuted distal radius fractures.

OBJECTIVES: This study was designed to compare the results of palmar locking plate and K-wire augmented external fixation in the treatment of intra-articular comminuted distal radius fractures. METHODS: The study included 30 patients with intra-articular comminuted distal radius fractures. Sixteen patients (11 men, 5 women; mean age 49 ± 16 years) underwent open reduction and palmar locking plate fixation, and 14 patients (11 men, 3 women; mean age 35 ± 10 years) underwent closed reduction and K-wire augmented external fixation. In both groups, eight patients had accompanying injuries. According to the AO/ASIF classification, there were four C1, 10 C2, and two C3 fractures in the locking plate group, and three C1, eight C2, and three C3 fractures in the external fixation group. For functional assessment, joint range of motion and grip strength were measured. The patients were assessed using the Gartland-Werley scale. Subjective functional assessment was made using the QuickDASH scale. On final radiographs, the presence of osteoarthrosis in the radiocarpal joint was assessed according to the Broberg-Morrey criteria. The follow-up period was at least 12 months (26.1 ± 6.1 months in the locking plate group, and 62.7 ± 16.8 months in the external fixation group). RESULTS: Wrist flexion (p=0.012) and supination (p=0.003) degrees at final follow-up were significantly greater in the locking plate group. Other range of motion parameters were similar in the two groups. On final radiographic measurements, there were no significant differences between the two groups with respect to losses in palmar angulation, radial length, and radial inclination, and change in ulnar variance. The mean Gartland-Werley scores did not differ significantly (2.4 ± 2.4 with plate fixation, and 2.0 ± 2.8 with external fixation; p>0.05). The results were excellent in 11 patients (68.8%) and good in five patients (31.3%) with plate fixation. The results of external fixation were excellent in 11 patients (78.6%), good in two patients (14.3%), and moderate in one patient (7.1%). The mean QuickDASH scores and time to return to work were similar in patients treated with a locking plate and external fixator (QuickDASH score 2.4 ± 3.0 and 2.9 ± 5.4; 1.9 ± 0.5 months and 2.1 ± 0.7 months, respectively; p>0.05). The mean loss of strength compared to the healthy side at final follow-up was 3% in the locking plate group, and 5% in the external fixation group. Radiographic findings of stage 1 osteoarthrosis were observed in four patients (25%) in the plate group, and in 11 patients (78.6%) in the external fixation group. There were no complications in the locking plate group. In the external fixation group, two patients (14.3%) had regional pain syndrome, three patients (21.4%) had superficial pin and wire tract infections, and one patient complained of adherence at entry sites of the fixator. Overall, nine patients (64.3%) expressed dissatisfaction with the external fixator. CONCLUSION: Our results showed no superiority between the two treatment methods with respect to objective and subjective tools of evaluation. Palmar locking plate fixation was associated with full patient satisfaction. K-wire augmented external fixation can be used as a safe method in selected cases in which the severity of distal radius fracture would not allow palmar locking plate fixation.

[Open reduction and low-profile plate and/or screw fixation in the treatment of phalangeal fractures]. / Falanks kiriklarinda açik düzeltme ve mini plak ve/veya vida ile tespit yönteminin yeri.

OBJECTIVES: We evaluated the functional results and the effectiveness of open reduction and low-profile plate and/or screw fixation in the treatment of phalangeal fractures. METHODS: The study included 17 patients (5 women, 12 men; mean age 33 + or - 10 years; range 17 to 48 years) with closed, nonarticular phalangeal fractures. One patient had two phalangeal fractures. There were 14 proximal and four mid phalangeal fractures, including seven oblique, four spiral, one transverse, and six comminuted fractures. The mean duration from injury to surgery was 2.6 + or - 2.9 days (range 0 to 11 days). Following open reduction, seven fractures were treated with a mini plate and screws, and 11 fractures with mini screws. For functional evaluations, total active motion (TARM) and grip strength were measured and the Q-DASH (Quick-Disabilities of the Arm, Shoulder and Hand) questionnaire was administered. The mean follow-up was 35 + or - 20 months (range 12 to 75 months). RESULTS: Union was obtained in all the patients in a mean of 4.5 months. At final assessments, TARM ranged from 160 degrees to 260 degrees (mean 200 + or - 39.5 degrees ), showing excellent, good, and moderate results in six fingers (33.3%), five fingers (27.8%), and seven fingers (38.9%), respectively. An excellent or good TARM was obtained in eight fingers (72.2%) treated with mini screws, and in three fingers (42.9%) treated with plate-screw fixation. The mean grip strength decreased by 7.5% (range 0 to 20%) on the affected side. The mean Q-DASH score was 3.4 + or - 4.4. According to the classification of complications proposed by Page and Stern, seven major (38.9%) and six minor (33.3%) complications were seen. Two patients (11.1%) had delayed union. CONCLUSION: Our findings do not justify open reduction and low-profile plate and/or screw fixation as the first choice in the treatment of phalangeal fractures. If plate and screw fixation is necessary, the most minimally invasive method such as screw fixation should be preferred.

Arthroscopic inspection after the surgical treatment of patella fractures.

After the treatment of patella fractures the only way to evaluate healing at the articular surface before implant removal is through arthroscopy. The purpose of this study was to examine the healing potential of the cartilage. Arthroscopy was performed in 18 patients at the time of implant removal. The mean age of the patients was 42.1 years. The time elapsed from the index surgery to the arthroscopy and implant removal surgery was 12.9 months. During the arthroscopy, we inspected articular step-off, cartilage loss, and joint surface irregularities. Cartilage irregularities were observed in 13 of the 18 patients. Five patients had well-healed cartilage at the patellar surface. Although none of the patients had displacement at final follow-up X-rays, step-off was detected in two patients during arthroscopy. Our observation showed that cartilage lesions did not correlate with clinical and radiological evaluation. Despite good knee scores, we observed surface irregularities, chondral lesions, and fibrillation in most of the cases implicating subsequent patellofemoral arthritis.

Capitellar cartilage injuries concomitant with radial head fractures.

PURPOSE: To evaluate the incidence and types of capitellar cartilage injuries associated with higher-grade radial head fractures. METHODS: Fifty-one consecutive patients with operatively treated, unstable, displaced Mason type II to III radial head fractures were identified. Ten of 51 patients had capitellar cartilage injuries concomitant with these fractures. All cartilage injuries were identified at the time of surgery except in 1 patient whose injury was determined via computed tomography. There were 8 men and 2 women with an average age of 33 years (range, 24-39 years). Lesions were seen with direct inspection and recorded by location, size, and thickness. RESULTS: The incidence of capitellar chondral lesions concomitant with operatively treated Mason type II to III radial head fractures appeared in 10 of 51 patients. The average size was 5 x 5 mm (range, 2 x 2 mm to 10 x 10 mm). Four patients had Mason type II and 6 had Mason type III radial head fractures. The average surface of the cartilage injury was 6 x 7 mm (range, 3 x 6 mm to 10 x 10 mm) for Mason type II fractures and 4 x 4 mm (range, 2 x 2 mm to 5 x 10 mm) for Mason type III fractures. Two Mason type III fractures had full-thickness cartilage lesions, and 4 Mason type III fractures had partial-thickness cartilage lesions. Two Mason type II fractures had full-thickness cartilage lesions and the other 2 had partial-thickness cartilage lesions. CONCLUSIONS: Capitellar cartilage lesions frequently occurred concomitantly with higher-grade radial head fractures. The incidence of these lesions increased with greater severity of radial head fractures. Low-grade radial head fractures created higher-grade cartilage lesions as the intact radial head can cause more damage to the capitellum. Careful evaluation of the joint should be performed for these subtle injuries. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognostic IV.