Regeneration of exhausted adsorbents after PFAS adsorption: A critical review.

The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.

Adsorption of Cu(II) and Ni(II) from Aqueous Solutions Using Synthesized Alkali-Activated Foamed Zeolite Adsorbent: Isotherm, Kinetic, and Regeneration Study.

Water pollution, particularly from heavy metals, poses a significant threat to global health, necessitating efficient and environmentally friendly removal methods. This study introduces novel zeolite-based adsorbents, specifically alkali-activated foamed zeolite (AAFZ), for the effective adsorption of Cu(II) and Ni(II) ions from aqueous solutions. The adsorbents' capabilities were comprehensively characterized through kinetic and isotherm analyses. Alkaline activation induced changes in chemical composition and crystalline structure, as observed via XRF and XRD analyses. AAFZ exhibited a significantly larger pore volume (1.29 times), higher Si/Al ratio (1.15 times), and lower crystallinity compared to ZZ50, thus demonstrating substantially higher adsorption capacity for Cu(II) and Ni(II) compared to ZZ50. The maximum monolayer adsorption capacities of ZZ50 and AAFZ for Cu(II) were determined to be 69.28 mg/g and 99.54 mg/g, respectively. In the case of Ni(II), the maximum monolayer adsorption capacities for ZZ50 and AAFZ were observed at 48.53 mg/g and 88.99 mg/g, respectively. For both adsorbents, the optimum pH for adsorption of Cu(II) and Ni(II) was found to be 5 and 6, respectively. Equilibrium was reached around 120 min, and the pseudo-second-order kinetics accurately depicted the chemisorption process. The Langmuir isotherm model effectively described monolayer adsorption for both adsorbents. Furthermore, the regeneration experiment demonstrated that AAFZ could be regenerated for a minimum of two cycles using hydrochloric acid (HCl). These findings highlight the potential of the developed adsorbents as promising tools for effective and practical adsorption applications.

Development of a magnetic nanocomposite sorbent (NiCoMn/Fe3O4@C) for efficient extraction of methylene blue and Auramine O.

A rapid and efficient method for the simultaneous monitoring and recovery of Auramine O (AO) and Methylene Blue (MB) dyes from water samples is presented. This method, named ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMN-µSPE), utilizes NiCoMn/Fe3O4@C composite sorbents. Response surface methodology (RSM) combined with artificial neural networks (ANN) and generalized regression artificial neural network (GRNN) under central composite design (CCD) was employed to optimize various parameters for efficient extraction, followed by further refinement using desirability function analysis (DFA) and genetic algorithms (GA). Under optimized conditions, the method achieved exceptional recovery rates (99.5 ± 1.2% for AO and 99.8 ± 1.1% for MB) with acetone as the eluent. Additionally, a high preconcentration factor of 45.50 and 47.30 for AO and MB, respectively, was obtained. Low detection limits of 0.45 ng mL⁻1 (AO) and 1.80 ng mL⁻1 (MB) were achieved with wide linear response ranges (5-1000 and 5-2000 ng mL⁻1 for AO and MB, respectively). The method exhibited good stability with RSDs below 3% for five recycling runs, and minimal interference from various ions was observed. This UA-DMN-µSPE-UV/Vis method offers significant advantages in terms of efficiency, preconcentration, and detection limits, making it a valuable tool for the analysis of AO and MB in water samples.

Diagnostic value of electrocardiographic indices in discriminating the culprit vessel based on the coronary dominancy in inferior acute myocardial infarction.

BACKGROUND: Identifying the culprit during inferior myocardial infarction (MI) is still challenging. We determined the diagnostic effect of electrocardiographic (ECG) indices in identifying the culprit vessel of acute MI and the impact of coronary artery dominance on it. METHODS: This cross-sectional study included patients with acute inferior MI who presented to Imam Khomeini Hospital and Tehran Heart Center and underwent primary PCI within 12 h of the onset of symptoms. A standard 12­lead ECG was recorded and interpreted by two cardiologists. Based on the coronary angiography, the patients were divided into two groups of LCX or RCA involvement and were compared for general variables and ECG indices. The diagnostic values of the ECG indices for predicting the culprit vessel were then calculated. RESULTS: We evaluated 411 patients with inferior STEMI (321 [77.5%] male, age 58.1 ± 11.1 years). RCA was the culprit vessel in 286 patients (69.1%) and LCX in 128 patients (30.9%). 321 patients (77.5%) were right dominant, 40 (9.7%) patients were left dominant, and 53 patients (12.8%), were codominant. Coronary dominance had minimal impact on the ECG indices regarding culprit identification even after adjustment for confounders. STE in lead III > lead II had the highest sensitivity for detecting RCA as the culprit (sensitivity: 89.2% and specificity: 57.8%). STE ≥0.1 mV in V5 or V6 leads had the highest sensitivity for detecting LCX as the culprit (sensitivity: 51.6, specificity: 93.7%). CONCLUSION: In inferior STEMI, ECG indices can predict the culprit vessel with acceptable sensitivity and specificity independent of coronary artery dominance.

Double ionic liquid reinforced g-CN nanocomposite for an enhanced adsorption of methylparaben: Mechanism, modeling, and optimization.

The efficient removal of organic pollutants, especially pharmaceuticals, from aquatic environments has attracted great attentions. Application of green, multipurpose, and inexpensive compounds is being extensively favorite as adsorbent instead of the traditional chemicals or materials. In this study, sulfonated graphitic carbon nitride was modified with two ionic liquids of polyethyleneimine and choline chloride to create a novel nanocomposite (Sg-CN@IL2 NC) and to use for removal of methylparaben (MeP) from aqueous media. After confirmation of the successful synthesized using different methods, the effective parameters for MeP removal, such as initial MeP concentration, adsorbent dose, sonication time, and temperature, as well as their interactions, were experimentally examined and modeled using response surface methodology (RSM), generalized regression neural network (GRNN), and radial basis function neural network (RBFNN). The models were then optimized using desirability function analysis (DF) and genetic algorithm (GA). The results showed that MeP adsorption: a) can be explained more accurate and reliable using GRNN (AARD% = 11.67, MAE = 15.31, RAE % = 45.42, RRSE % = 55.18, MSE = 435.86, RMSE = 20.70, and R2 = 0.995) than the others; b) reached equilibrium within 7.0 min with a maximum uptake of 267.2 mg/g at a temperature of 45 °C and a neutral pH; c) followed from Freundlich (R2 = 0.999) isotherm and PSO kinetic (R2 = 0.95) models; d) is endothermic and spontaneous; e) is mainly due to π-π stacking, electrostatic and hydrogen bonding interactions. Moreover, Sg-CN@IL2 NC showed an appropriate reusability for up to five cycles. These findings demonstrate the potential of as-prepared NC as an excellent adsorbent for removal of MeP from aqueous media.

Alamandine injection in the periaqueductal gray and rostral ventromedial medulla attenuates allodynia induced by sciatic nerve ligation in rats.

Alamandine, a peptide known to interact with Mas-related G protein-coupled receptor subtype D (MrgD), has been implicated in moderating inflammatory signals. MrgD receptors are abundantly found in pain transmission pathways, but the role of alamandine/MrgD in pain modulation has not been thoroughly explored. This study aimed to investigate the effects of alamandine (10, 40, and 100 pmol) in a rat model of allodynia induced by sciatic nerve ligation, with a specific focus on examining the involvement of MrgD receptors, NMDAR1, and serotonin transporter (SERT) in the ventrolateral periaqueductal gray (vlPAG) and rostral ventromedial medulla (RVM). Microinjection of alamandine into the vlPAG at a dose of 100 pmol and into the RVM at doses of 40 and 100 pmol resulted in a significant increase in paw withdrawal threshold (PWT). Additionally, co-administration of D-Pro7-Ang-(1-7) at 50 pmol, an MrgD receptor antagonist, effectively blocked the analgesic effects of alamandine. Immunofluorescence analysis confirmed the presence of MrgD receptors in both the vlPAG and RVM regions. Importantly, an upregulation of MrgD receptor expression was observed following allodynia induction, suggesting a potential compensatory mechanism in response to pain. Our findings support the co-localization of MrgD receptors with NMDAR1 in vlPAG neurons, suggesting their ability to initiate analgesic pathways similar to those activated by NMDA receptors in the vlPAG. Furthermore, our results underscore a significant co-localization of MrgD receptors with the SERT in the RVM, underscoring their potential impact on serotonergic neurons involved in promoting analgesic effects.

ß-cyclodextrin grafted multi-walled carbon nanotubes/chitosan (MWCNT/Cs/CD) nanocomposite for treatment of methylene blue-containing aqueous solutions.

ß-cyclodextrin (CD) was grafted with multi-walled carbon nanotubes/chitosan (MWCNTs/Cs) to obtain MWCNTs/Cs/CD nanocomposite (NC) for methylene blue (MB) adsorption from aqueous media. TEM, XRD, TGA, Raman spectra, and BET & BJH analyses were utilized to characterize and confirm the successful synthesis of as-prepared NC. MB capture was investigated by considering the parameters of pH (1.9-9.0), temperature (∼16-63 °C), sonication time (∼5-15 min), MB concentration (∼1.2-48 mg/L), and NC dose (0.03-0.26 mg). The obtained responses were then modelled using CCD, generalized regression neural network (GRNN), and least squares support vector machine (LS-SVM), of which the latter found to provide most reliable and accurate results (RMSE = 0.0235, MAE = 0.020, AAD = 0.0047, and R2 = 0.999). Moreover, the genetic algorithm-based optimization results showed that under the respective values of 7.05, 45.5 °C, 10 min, 23 mg/L, 0.12 g, MWCNTs/Cs/CD NC would be able to remove 96.75% of MB with an adsorption capacity of 603 mg/g, through different mechanisms mainly electrostatic interactions. Following from Dubinin-Radushkevich (D-R) isotherm (qs = 460.66 ± 8.9 and R2 > 0.99) and intraparticle diffusion kinetic (R2 = 0.75-0.90) models indicated a chemical adsorption mechanism. Besides, thermodynamic parameters (ΔH◦ = -66.9 kJ/mol, ΔG◦ = between -3.77 kJ/mol and -8.52 kJ/mol, and ΔS◦ = 237.1818 J/mol K) confirmed an endothermic and spontaneous nature for the adsorption. These findings along with appropriate recyclability (five times), turn the as prepared NC to a promising material in removing MB from aqueous solutions.

Post-synthetic thiol modification of covalent organic frameworks for mercury(II) removal from water.

Various materials have been developed for environmental remediation of mercury ion pollution. Among these materials, covalent organic frameworks (COFs) can efficiently adsorb Hg(II) from water. Herein, two thiol-modified COFs (COF-S-SH and COF-OH-SH) were prepared, through the reaction between 2,5-divinylterephthalaldehyde and 1,3,5-tris-(4-aminophenyl)benzene, followed by post-synthetic modification using bis(2-mercaptoethyl) sulfide and dithiothreitol, respectively. The modified COFs showed excellent Hg(II) adsorption abilities with maximum adsorption capacities of 586.3 and 535.5 mg g-1 for COF-S-SH and COF-OH-SH, respectively. The prepared materials showed excellent selective absorbability for Hg(II) against multiple cationic metals in water. Unexpectedly, the experimental data showed that both co-existing toxic anionic diclofenac sodium (DCF) and Hg(II) performed positive effect for capturing another pollutant by these two modified COFs. Thus, a synergistic adsorption mechanism between Hg(II) and DCF on COFs was proposed. Moreover, density functional theory calculations revealed that synergistic adsorption occurred between Hg(II) and DCF, which resulted in a significant reduction in the adsorption system's energy. This work highlights a new direction for application of COFs to simultaneous removal of heavy metals and co-existing organic pollutants from water.

Identification of Tartrazine adulteration and evaluating exposure to synthetic dyes of sunset yellow and Quinoline yellow through consumption of food products among children.

Excessive consumption of synthetic food dyes by children may raise concerns about their health. These dyes may aggravate the hyperactivity symptoms and exacerbate asthma in sensitive children. The purpose of this study was to determine the presence of sunset yellow and quinoline yellow dyes, as well as tartrazine in dairy-free fruit ice cream, freeze pop, jelly, and candy. Additionally, we evaluated the amount of two food dyes consumed by children. To do so, a total of 150 food samples, including 20 dairy-free fruit ice creams, 25 freeze pops, 57 jelly products, and 48 types of candy were randomly selected from stores in Shiraz, Iran. Then, using the high-performance liquid chromatography (HPLC) method and an ultraviolet (UV) detector, we measured the amounts of sunset yellow and quinoline yellow dyes and identified the use of tartrazine. Also, the per capita consumption (grams per day) of the mentioned foods was calculated using a checklist in two groups of male and female primary schoolchildren aged 6-9 years and 10-13 years in Shiraz, Iran. According to the results, 11 (7.33%) samples contained only tartrazine and 107 (71.33%) samples contained quinoline yellow and sunset yellow synthetic dyes. In addition, of 107 samples that used quinoline yellow and sunset yellow, 102 (95.33%) contained unauthorized tartrazine. Only seven (6.54%) samples contained exceedingly high concentrations of authorized quinoline yellow and sunset yellow synthetic dyes. However, the exposure assessment showed that the intake of quinoline yellow and sunset yellow was at average levels and the 95th percentile in both age groups was less than the associated acceptable daily intake (ADI). For synthetic dyes, the target hazard quotient (THQ) and hazard index (HI) were less than one, indicating that ingestion of these two dyes via food products does not pose a risk to children's overall health.

Efficient removal of levofloxacin by a magnetic NiFe-LDH/N-MWCNTs nanocomposite: Characterization, response surface methodology, and mechanism.

Antibiotic pollutants in water bodies, was studied to remove using an oxidized, nitrogen-doped, and Fe3O4 and NiFe-LDH decorated MWCNT (magnetic NiFe-LDH/N-MWCNTs) nanocomposite (NC). The novel, engineered NC was characterized by different techniques of SEM, XRD, TEM, EDX, and XPS and then examined under different main effective parameters of NC dose, levofloxacin (LVX) concentration, pH, time, and temprature. The experimentally obtained data then evaluated using the modeling approaches of RSM, GRNN, and ANFIS. The as prepared adsorbent showed an excellent adsorption performance (removal efficiency = 95.28% and adsorption capacity = 344.83-454.55 mg/g) under the respective values of the mentioned parameters of 0.152 g, 23.01 mg/L, 12.00 min, and 37.5 °C, respectively. The comparison of the models showed that although all of them accurately predicted the removal efficiency, ANFIS presented the best capability with R2, RMSE, MSE, MAE, as well as AAD of 0.9998, 0.0082, -0.0004, 0.0069, 0.1322, respectively. The adsorption by the NC followed Freundlich isotherm (R2 = 0.9993) and PSO kinetic (>0.998) models, confirming a heterogenous chemisorption process. The thermodynamic parameters showed an endothermic and spontaneous nature for LVX removal by magnetic NiFe-LDH/N-MWCNTs NC. A high-performance efficiency, appropriate reusability (five times without loss of efficiency), as well as easy separation due to magnetic properties, makes the NC to a promising option in removing LVX from water.

Dispersive clean-up process based on a magnetic graphene oxide nanocomposite for determination of 2-glycerol monopalmitate in olive oil prior to GC-FID and GC-MS analysis.

BACKGROUND: Recently, methods have been developed for the better quality control, fraud detection and analytical investigation of olive oil. Magnetic graphene oxide (GO) material is known for its reusability, high adsorption capability and stability in food sample preparation. Monopalmitine or 2-glycerol monopalmitate (2-GMP) is one of the main parameters in the quality assay and classification of olive oil, which can be classified as extra virgin ≤ 0.9% and olive pomace ≤ 1.2. Hence, newly synthesized magnetic GO (MGO) and commercial silica-gel were used as a dispersive solid-phase clean-up (d-SPE) sorbent to determine 2-GMP value in olive oil samples prior to gas chromatography (GC) analysis. The d-SPE method is validated with olive oil certified reference material (CRM) with respect to silica-gel and a MGO nanocomposite. RESULTS: The developed d-SPE method was applied for various virgin, refined and pomace olive oil samples to determine the value of 2-GMP%. The presence of 2-GMP in the samples was confirmed by GC-mass spectrometry analysis based on silylation derivatives of the analyte. Finally, the d-SPE-MGO method was determined 2-GMP% as 1.9% for pomace olive oil, 0.6% for refined olive oil, 0.4% for virgin olive oil and 3.1% for CRM. The MGO provided satisfactory clean-up recovery (124%) in the acceptable data range for CRM2018, and silica-gel also provided satisfactory recovery (83%) for CRM2018. The proposed method performed with higher sensitivity and efficiency for screening 2-GMP% in olive oil. CONCLUSION: The MGO based d-SPE method was applied for clean-up purposes to determine 2-GMP%. It proved superior via its advantageous features of super quickness, easy isolation with an external magnet and the highly efficient exclusion of all the coexisting interfering peaks conventionally generated with a standard silica-gel material. These methods based on MGO and silica-gel are reflected in the dispersive mode of extraction and can be used as alternatives to conventional methods. Considering the benefits of the consumption of significantly fewer sorbents and less time required regarding the dispersive methods, the methods can be utilized as alternatives in contrast to conventional techniques. © 2021 Society of Chemical Industry.

Inflammatory Bowel Disease during COVID-19 Pandemic: A Prospective Cohort Study of Incidence Rate and Patients' Concerns.

BACKGROUND: During the coronavirus disease 2019 (COVID-19) pandemic, it is imperative to focus on the concerns of patients with chronic diseases regarding the influence of such conditions and medications prescribed for this purpose on their susceptibility to COVID-19 and its severity. This study aimed to evaluate COVID-19 incidence rate, patients' concerns, sources of information, and medication compliance in a cohort of patients suffering from inflammatory bowel disease (IBD). METHODS: In this prospective cohort study, 214 confirmed cases of IBD were followed up within 8 months up to December 20, 2020. In the confirmed cases of COVID-19, the interviews were repeated 3 months later to assess the post-COVID-19 symptoms and conditions. RESULTS: Among 214 patients with IBD, 113 cases (52.8%) were female, and 169 individuals (79%) were suffering from ulcerative colitis (UC). The mean±SD scores of commitment to standard preventive guidance on COVID-19 were 81.6±19. Moreover, 147 patients (69%) had further stated at least one critical apprehension. The main sources of their information on COVID-19 were physicians (n=89, 41.5%) and websites (n=71, 33.1%). In addition, 10 patients with IBD were diagnosed as confirmed cases of COVID-19, one of them expired due to severe acute respiratory syndrome (SARS). CONCLUSION: The incidence of COVID-19 in the cohort of the patients with IBD in this study was broadly comparable to the general reference population. Tight adherence to physical distancing, and if possible, encouragements of patients with IBD to do remote work along with the provision of virtual care to them cannot be overemphasized. Physicians and websites can also play crucial roles in providing accurate information to patients affected with IBD, especially in terms of reassurances for medication compliance.

Hydrocracking of Heavy Fischer-Tropsch Wax Distillation Residues and Its Blends with Vacuum Gas Oil Using Phonolite-Based Catalysts.

The Fischer-Tropsch heavy fraction is a potential feedstock for transport-fuels production through co-processing with fossil fuel fraction. However, there is still the need of developing new and green catalytic materials able to process this feedstock into valuable outputs. The present work studies the co-hydrocracking of the Fisher-Tropsch heavy fraction (FT-res.) with vacuum gas oil (VGO) at different ratios (FT-res. 9:1 VGO, FT-res. 7:3 VGO, and FT-res. 5:5 VGO) using phonolite-based catalysts (5Ni10W/Ph, 5Ni10Mo/Ph, and 5Co10Mo/Ph), paying attention to the overall conversion, yield, and selectivity of the products and properties. The co-processing experiments were carried out in an autoclave reactor at 450 °C, under 50 bars for 1 and 2 h. The phonolite-based catalysts were active in the hydrocracking of FT-res.:VGO mixtures, presenting different yields to gasoline, diesel, and jet fuel fractions, depending on the time of reaction and type of catalyst. Our results enable us to define the most suitable metal transition composition for the phonolite-based support as a hydrocracking catalyst.

Antibacterial agent-releasing scaffolds in dental tissue engineering.

It seems quite challenging in tissue engineering to synthesize a base material with a range of essential activities, including biocompatibility, nontoxicity, and antimicrobial activities. Various types of materials are synthesized to solve the problem. This study aimed to provide the latest relevant information for practitioners about antibacterial scaffolds in dental tissue engineering. The PubMed search engine was used to review the relevant studies with a combination of the following terms as search queries: tissue engineering, scaffolds, antimicrobial, dentistry, dental stem cells, and oral diseases. It is noteworthy to state that only the terms related to tissue engineering in dentistry were considered. The antimicrobial scaffolds support the local tissue regeneration and prevent adverse inflammatory reactions; however, not all scaffolds have such positive characteristics. To resolve this potential defect, different antimicrobial agents are used during the synthesis process. Innovative methods in guided tissue engineering are actively working towards new ways to control oral and periodontal diseases.

Sentinel lymph node mapping in colorectal cancers with radioactive tracer; is it an efficient method?

CONTEXT: The sentinel lymph nodes (SLNs), as most other regions, are prone to tumoral invasion. In colorectal cancers, they can help the higher levels of pathological examination techniques. AIMS: We attempted to investigate the efficiency of the use of radioactive tracer in identifying SLNs in colorectal cancers using the same pathological technique. SETTINGS AND DESIGN: This cross-sectional, single-center study was carried out from 2014 to august 2016 at Mashhad University of Medical Sciences. SUBJECTS AND METHODS: The study population included 100 patients with colorectal cancers. We used a radioactive tracer to detect SLNs and to compare the number and involvement of SLNs and non-SLNs generally and in terms of the tumor site. For pathological study, we used the same conventional method in both the groups. STATISTICAL ANALYSIS USED: Statistical analysis was performed using SPSS 22.0 software (IBM Corp., Armonk, NY, USA) with Chi-square and Fisher's exact test, Student's t-test, ANOVA test, Mann-Whitney U-test, and Kruskal-Wallis test. RESULTS: SLNs were detected in 89 of 100 patients. All the remaining 11 patients had T4 lower rectal cancer and the injection was performed ex vivo. We noted ten cases of upstaging due to SLN mapping and nine cases of false negative. Thus, the sensitivity was found to be 43.75%at and the accuracy was 78.65%. CONCLUSIONS: We used the same traditional method in both the groups, and our sensitivity, accuracy and upstaging rate were fewer than similar studies. Our recommendation for further studies is to use intensive SLN biopsy method in both groups of SLNs and non-SLNs.

Chemical and Physical Characterization of the Hackberry (Celtis australis) Seed Oil: Analysis of Tocopherols, Sterols, ECN and Fatty Acid Methyl Esters.

For the very first time, the nutritional and physicochemical properties of the oil extracted from hackberry Celtis australis fruit were investigated with the aim of possible applications of such wild fruit oil. The physicochemical properties such as peroxide value, acidity, saponification, iodine value and total fat content of the extracted oil were examined extensively. The obtained results showed that peroxide value, acidity, saponification, iodine value and total fat content of the extracted oil were found to be 4.9 meq O2/kg fat, 0.9 mg KOH/g fat, 193.6 mg KOH/g fat, 141.52 mg I2/g fat and ~5%, respectively. The predominant fatty acid found in this wild fruit is linoleic acid which was calculated to be 73.38%±1.24. In addition, gamma-tocopherol (87%) and ß-sitosterol (81.2%±1.08) were the major tocopherol and sterol compositions found in Celtis australis seed oil. Moreover, equivalent carbon number (ECN) analysis has indicated that the three linoleic acids are the main composition of the triacylglycerols extracted from Celtis australis. Also, the high value of omega 6 and ß-sitosterol make this oil applicable in cosmetics and pharmaceutical applications.

Technologies for the nitrogen oxides reduction from flue gas: A review.

The required energy of the global industry is mostly generated from fossil fuel sources, such as natural gas, gasoline, diesel, oil, and coal. Nitrogen oxides are one of the main air pollutants that are produced from the combustion of fossil fuels in stationary and mobile sources. Development of new technologies to decrease the NOx emission from exhaust gases is essential due to the harmful effect of NOx on the environment and human health. Compared with pre-combustion and combustion methods (with <50% NOx removal efficiency), the post-combustion methods with higher efficiency (above 80%) have attracted more attention in NOx elimination. This review describes the currently used technologies of NOx abatement. Different available post-combustion methods of NOx removal, including selective catalytic reduction (using different types of reducing reagents, including ammonia, hydrogen, hydrocarbons, and carbon monoxide), selective noncatalytic reduction, wet scrubbing, adsorption, electron beam, nonthermal plasma, and electrochemical reduction of NOx, are discussed.

Establishment of hairy root cultures by Agrobacterium rhizogenes mediated transformation of Trachyspermum ammi L. for the efficient production of thymol.

Trachyspermum ammi is an important medicinal plant that contains a bioactive compound namely thymol. In the study, T. ammi was transformed by Agrobacterium rhizogenes strains. Seedling stem explants were inoculated with A. rhizogenes strains A4, LBA 9402, ATCC 15834, and the effect of different co-cultivation media along with incorporation of acetosyringone (100 µM) was evaluated comparatively on the frequency of hairy root induction. The polymerase chain reaction using rolB and virD specific primers was served to confirm the putative transformed hairy roots. All strains established hairy root with various frequencies, among which strain ATCC 15834 was significantly the most efficient strain for hairy root induction (84.3%). Half-strength B5 medium and incorporation of acetosiryngone (100 µM) were also significantly optimal for hairy root induction. Hairy roots culture induced by ATCC 15834 using half-strength B5 liquid medium supplemented with 30 g L-1 sucrose indicated the highest accumulation of biomass (99.05 g L-1 FW and 10.95 g L-1 DW) and thymol content (11.30 mg g-1 DM) at 20 days. Nearly 4.9-fold and 5.3-fold increment of biomass and thymol accumulation was observed, respectively, at 20 days in comparison with the untransformed control roots. The results showed the high potential of T. ammi hairy roots for the biosynthesis of thymol.

Comparing the impact of educational behavioral interventions on maternal sleep between face-to-face and electronic training groups, during the postpartum period.

INTRODUCTION: The postpartum period is a transition to a critical stage. Moreover, the rapid changes experienced after delivery, expose the mother to unpleasant experiences such as changes in sleep patterns. Trying to an appropriate training method is necessary. This study aims to conduct a comparative study between the impact of face-to-face training and e-training on maternal sleep during the postpartum period. MATERIALS AND METHODS: The present study was empirically conducted on 110 postpartum mothers who visited the selected healthcare centers of Isfahan in 2015. Mothers randomly divided into three groups (face to face, electronic and control). Data collection tools included demographic and fertility questionnaire and Pittsburgh Sleep Quality Index. Intervention groups were received training such as mothers with necessary instructions regarding the health approaches, relaxation techniques, sleeping place, and energy-saving techniques. Mothers' quality of sleep was measured and compared before training (until the 10th day after childbirth) then in the second and third cares (from the 10th to 30th day after childbirth) in all three groups. Data were analyzed using descriptive statistics and ANOVA and analyze variance with repeated measures in SPSS (SPSS Inc., Chicago, IL, USA,) version 17. RESULTS: The results showed there was a significant difference among the sleep quality scores in the three times in the e-training (P < 0.001) and face-to-face groups (P < 0.001) and in the control group (P = 0.01), but the improvement in the sleep quality score has been higher in the two groups; e-training and face-to-face, than in the control group. In addition, the mothers' mean sleep quality score was different between the control group and face-to-face group as well as between the control group and e-training group. While, no statistically significant difference was found between the e-training group and face-to-face group. CONCLUSION: Training through both methods; face-to-face and electronic, had the same impact on maternal sleep quality during the postpartum period. Therefore, despite the belief that in-person trainings are more effective, the findings of this research showed the effectiveness of electronic methods too, and determined that this method, has the same effectiveness as the face-to-face method has.

Study of the Impact of Educational Behavioral Interventions on Fatigue in Mothers in the Postpartum Period in the Groups of Face-to-Face and Electronic Training.

BACKGROUND: Maternal fatigue in the postpartum period include factors that affect the quality of life and health of both the mother and newborn. This study aimed to investigate two educational approaches regarding mother's fatigue in the postpartum period. MATERIALS AND METHODS: This experimental study was performed among 110 pregnant mothers during their postpartum care using random sampling. The participants were divided in three groups, namely, face-to-face, e-learning, and control groups. Interventions included individual meetings between the researcher and mothers in the face-to-face group and giving educational compact disc to the e-learning department to improve maternal fatigue. Personal information and fertility data was obtained (before training); the maternal fatigue questionnaire Fatigue Severity Scale (FSS) was completed before and after any type of (face-to-face, e-learning, and control) education. Obtained data were analyzed using one-way analysis of variance (ANOVA) and repeated-measures ANOVA. RESULTS: Results showed that both face-to-face and e-learning methods had similar maternal fatigue scores. The average change on the maternal fatigue score in the second treatment was (p = 0.02) and the third treatment was (p < 0.001)among three groups that was indicative of significant statistical differences. Similarly, there was no statistically significant difference in the average maternal fatigue score between the two groups before the intervention and in the second and third groups after the intervention. Therefore, over time, the training was unaffected. CONCLUSIONS: The findings of this study indicate that both face-to-face and e-learning methods are effective to reduce maternal postpartum fatigue.