Protein ligand and nanotopography separately drive the phenotype of mouse embryonic stem cells.

Biochemical and biomechanical signals regulate stem cell function in the niche environments in vivo. Current in vitro culture of mouse embryonic stem cells (mESC) uses laminin (LN-511) to provide mimetic biochemical signaling (LN-521 for human systems) to maintain stemness. Alternative approaches propose topographical cues to provide biomechanical cues, however combined biochemical and topographic cues may better mimic the in vivo environment, but are largely unexplored for in vitro stem cell expansion. In this study, we directly compare in vitro signals from LN-511 and/or topographic cues to maintain stemness, using systematically-varied submicron pillar patterns or flat surfaces with or without preadsorbed LN-511. The adhesion of cells, colony formation, expression of the pluripotency marker,octamer-binding transcription factor 4 (Oct4), and transcriptome profiling were characterized. We observed that either biochemical or topographic signals could maintain stemness of mESCs in feeder-free conditions, indicated by high-level Oct4 and gene profiling by RNAseq. The combination of LN-511 with nanotopography reduced colony growth, while maintaining stemness markers, shifted the cellular phenotype indicating that the integration of biochemical and topographic signals is antagonistic. Overall, significantly faster (up to 2.5 times) colony growth was observed at nanotopographies without LN-511, suggesting for improved ESC expansion.

Advanced bioengineering of female germ cells to preserve fertility.

Oogenesis and folliculogenesis are considered as complex and species-specific cellular differentiation processes, which depend on the in vivo ovarian follicular environment and endocrine cues. Considerable efforts have been devoted to driving the differentiation of female primordial germ cells toward mature oocytes outside of the body. The recent experimental attempts have laid stress on offering a suitable microenvironment to assist the in vitro folliculogenesis and oogenesis. Despite developing a variety of bioengineering techniques and generating functional mature gametes through in vitro oogenesis in earlier studies, we still lack knowledge of appropriate microenvironment conditions for building biomimetic culture systems for female fertility preservation. Therefore, this review paper can provide a source for a large body of scientists developing cutting-edge in vitro culture systems for female germ cells or setting up the next generation of reproductive medicine as feasible options for female infertility treatment. The focal point of this review outlines advanced bioengineering technologies such as 3D biofabricated hydrogels/scaffolds and microfluidic systems utilized with female germlines for fertility preservation through in vitro folliculogenesis and oogenesis.

Protein Ligand Nanopattern Size Selects for Cellular Adhesion via Hemidesmosomes over Focal Adhesions.

Hemidesmosomes (HDs) are multiprotein complexes that firmly anchor epidermal cells to the basement membrane of skin through the interconnection of the cytoplasmic intermediate filaments with extracellular laminin 332 (Ln332). Considerably less attention has been paid to HDs compared to focal complexes/focal adhesions (FC/FAs) in mechanistic single-cell structures due to the lack of suitable in vitro model systems. Here nanopatterns of Ln332 (100-1000 nm) are created to direct and study the formation of HD in adherent HaCaT cells. It is observed that HaCaT cells at Ln 332 nanopatterns adhere via hemidesmosomes, in stark contrast to cells at homogeneous Ln332 surfaces that adhere via FC/FAs. Clustering of α6 integrin is observed at nanopatterned Ln332 of 300 nm patches and larger. Cells at 500 nm diameter patterns show strong colocalization of α6 integrin with ColXVII or pan-cytokeratin compared to 300 nm/1000 nm indicating a threshold for HD initiation >100 nm but a pattern size selection for maturation of HDs. It is demonstrated that the pattern of Ln332 can determine the cellular selection of adhesion types with a size-dependent initiation and maturation of HDs. The protein nanopatterning approach that is presented provides a new in vitro route to study the role of HDs in cell signaling and function.

Polylysine for skin regeneration: A review of recent advances and future perspectives.

There have been several attempts to find promising biomaterials for skin regeneration, among which polylysine (a homopolypeptide) has shown benefits in the regeneration and treatment of skin disorders. This class of biomaterials has shown exceptional abilities due to their macromolecular structure. Polylysine-based biomaterials can be used as tissue engineering scaffolds for skin regeneration, and as drug carriers or even gene delivery vectors for the treatment of skin diseases. In addition, polylysine can play a preservative role in extending the lifetime of skin tissue by minimizing the appearance of photodamaged skin. Research on polylysine is growing today, opening new scenarios that expand the potential of these biomaterials from traditional treatments to a new era of tissue regeneration. This review aims to address the basic concepts, recent trends, and prospects of polylysine-based biomaterials for skin regeneration. Undoubtedly, this class of biomaterials needs further evaluations and explorations, and many critical questions have yet to be answered.

Advanced bioengineering of male germ stem cells to preserve fertility.

In modern life, several factors such as genetics, exposure to toxins, and aging have resulted in significant levels of male infertility, estimated to be approximately 18% worldwide. In response, substantial progress has been made to improve in vitro fertilization treatments (e.g. microsurgical testicular sperm extraction (m-TESE), intra-cytoplasmic sperm injection (ICSI), and round spermatid injection (ROSI)). Mimicking the structure of testicular natural extracellular matrices (ECM) outside of the body is one clear route toward complete in vitro spermatogenesis and male fertility preservation. Here, a new wave of technological innovations is underway applying regenerative medicine strategies to cell-tissue culture on natural or synthetic scaffolds supplemented with bioactive factors. The emergence of advanced bioengineered systems suggests new hope for male fertility preservation through development of functional male germ cells. To date, few studies aimed at in vitro spermatogenesis have resulted in relevant numbers of mature gametes. However, a substantial body of knowledge on conditions that are required to maintain and mature male germ cells in vitro is now in place. This review focuses on advanced bioengineering methods such as microfluidic systems, bio-fabricated scaffolds, and 3D organ culture applied to the germline for fertility preservation through in vitro spermatogenesis.

Microfluidic-Based Droplets for Advanced Regenerative Medicine: Current Challenges and Future Trends.

Microfluidics is a promising approach for the facile and large-scale fabrication of monodispersed droplets for various applications in biomedicine. This technology has demonstrated great potential to address the limitations of regenerative medicine. Microfluidics provides safe, accurate, reliable, and cost-effective methods for encapsulating different stem cells, gametes, biomaterials, biomolecules, reagents, genes, and nanoparticles inside picoliter-sized droplets or droplet-derived microgels for different applications. Moreover, microenvironments made using such droplets can mimic niches of stem cells for cell therapy purposes, simulate native extracellular matrix (ECM) for tissue engineering applications, and remove challenges in cell encapsulation and three-dimensional (3D) culture methods. The fabrication of droplets using microfluidics also provides controllable microenvironments for manipulating gametes, fertilization, and embryo cultures for reproductive medicine. This review focuses on the relevant studies, and the latest progress in applying droplets in stem cell therapy, tissue engineering, reproductive biology, and gene therapy are separately evaluated. In the end, we discuss the challenges ahead in the field of microfluidics-based droplets for advanced regenerative medicine.

A promising wound dressing based on alginate hydrogels containing vitamin D3 cross-linked by calcium carbonate/d-glucono-δ-lactone.

In the present study, we fabricated vitamin D3-loaded alginate hydrogel and assessed its wound healing capability in the animal model. The various concentrations of vitamin D3 were added to the pre-dissolved sodium alginate in deionized water and cross-linked by calcium carbonate in combination with d-glucono-δ-lactone. The microstructure, swelling behavior, weight loss, hemo- and cytocompatibility of the fabricated hydrogels were evaluated. In the last stage, the therapeutic efficacy of the prepared hydrogels was evaluated in the full-thickness dermal wound model. The scanning electron microscopy images showed that the prepared hydrogel was highly porous with the porosity of 89.2 ± 12.5% and contained the interconnected pores. Weight loss assessment showed that the prepared hydrogel is biodegradable with the weight loss percentage of about 89% in 14 days. The results showed that the prepared hydrogels were hemo- and cytocompatible. The animal study results implied that alginate hydrogel/3000 IU vitamin D3 group exhibited the highest wound closure present which was statistically significant than the control group (p < 0.05). Moreover, the histological examinations revealed that hydrogel containing 3000 IU vitamin D3 had the best performance and induced the highest re-epithelialization and granular tissue formation. All in all, this study suggests that alginate hydrogels with 3000 IU vitamin D3 can be exploited as a potential wound dressing in skin tissue engineering.

Panax ginseng Extract Improves Follicular Development after Mouse Preantral Follicle 3D Culture.

OBJECTIVE: Panax ginseng is a popular traditional herb that has been used in complementary and alternative medicine in eastern Asia, and it possesses pharmacologically active compounds like ginsenosides (GSs). This study aimed to investigate the impact of Panax ginseng extract (PGE) at different concentrations on in vitro follicular function and development in a three-dimensional (3D) culture system fabricated using sodium alginate after 12 days of culture. MATERIALS AND METHODS: In this experimental study, preantral follicles (n=661) were mechanically isolated from the ovaries of 14-day-old female NMRI mice using 29-gauge insulin syringes. Follicles were individually capsulated within sodium alginate, and divided into four groups including control and experimental groups 1, 2, and 3. Then, they were cultured for 12 days in the medium supplemented with different concentrations of PGE (0, 50, 100, and 500 µg/ mL, for control groups and groups 1, 2 and 3, respectively). At the end of the culture period, the mean diameter and maturation of follicles, follicular steroid production, mRNA expression level of proliferating cell nuclear antigen (PCNA) and follicle stimulating hormone receptor (FSH-R), and reactive oxygen species (ROS) levels in collected metaphase-II (MII) oocytes were determined. RESULTS: The mean diameter of follicles in group 2 was significantly increased as compared to other groups (P<0.001). The percentages of the survival and maturation rate and levels of secreted hormones were higher in group 2 than the other groups (P<0.05). Follicles cultured in the presence of PGE 100 µg/mL had higher levels of proliferation cell nuclear antigen (PCNA) and follicle stimulating hormone receptor (FSH-R) mRNA expression in comparison to other groups (P<0.05). Moreover, oocytes collected from groups 2 and 3 had lower levels of ROS as compared to other groups (P<0.05). CONCLUSION: Our results suggest that PGE at the concentration of 100 µg/mL induces higher follicular function and development in the 3D culture system.

In vitro and in vivo study of PCL/COLL wound dressing loaded with insulin-chitosan nanoparticles on cutaneous wound healing in rats model.

In the current study, insulin delivering chitosan nanoparticles were coated onto the electrospun poly (ε-caprolactone) (PCL)/Collagen (COLL) to produce a potential wound care material. Electrospun matrices were fabricated from PCL/COLL (1:1 (w/w)) solution. The insulin-loaded chitosan nanoparticles were produced by ionic gelation process and then attached onto the yarns. The dressings were investigated regarding their surface wettability, microstructure, the capacity to absorb water, water vapour permeability, mechanical properties, blood compatibility, microbial penetration, and cellular behavior. Full-thickness excisional wound model was used to assess the in vivo healing capacity of the dressings. Our data showed that after 14 days the wounds covered with PCL/COLL/Cs-Ins wound dressing could reach to nearly full wound closure compared with the sterile gauze which exhibited nearly 45% of wound size reduction. Our results suggest that fabricated scaffolds can be potentially applied in clinical practice for wound treatment.

In vitro and in vivo evaluation of electrospun cellulose acetate/gelatin/hydroxyapatite nanocomposite mats for wound dressing applications.

The present study aimed to evaluate the efficacy of cellulose acetate/gelatin/nanohydroxyapatite (CA/Gel/nHA) nanocomposite mats as the wound dressing. The dressings were prepared with electrospinning of CA/Gel solutions containing 12.5, 25 and 50 mg nHA. The dressings were evaluated regarding their water uptake capacity, morphology, tensile strength, water vapour transmission rate, wettability and cellular response with L929 cell line. The results showed that the concentration of nHA had a direct correlation with porosity, water contact angle, water uptake, water vapor transmission rate and proliferation. In vivo studies showed that all dressings had higher wound closure percent than the sterile gauze, as the control. The highest wound closure value was achieved in the CA/Gel +25 mg nHA group, which showed 93.5 ± 1.6%. The histological and the histomorphometric examinations of the wounds revealed that the CA/Gel +25 mg nHA dressing had the greatest collagen synthesis, re-epithelialization, neovascularization and also the best cosmetic appearance. Based on our finding, it could be concluded the applicability of electrospun nanofibrous CA/Gel/nHA dressings for successful wound treatment.

Differentiation of mesenchymal stem cells into neuron-like cells using composite 3D scaffold combined with valproic acid induction.

The nervous system has little capacity for self-repair after injury because neurons cannot proliferate owing to lack of suitable microenvironment. Therefore, neural tissue engineering that combines neural stem, scaffolds, and growth factors may improve the chance of restoration of damaged neural tissues. A favorable niche for neural regeneration would be both fibrous and electrically conductive scaffolds. Human Wharton jelly-derived mesenchymal stem cells were seeded on wet-electrospun 3D scaffolds composed of poly lactic acid coated with natural polymers including alginate and gelatin, followed by a multi-wall carbon nanotube coating. The results show that a wet-electrospun poly lactic acid scaffold at a concentration of 15% w/v had higher porosity (above 80%) than other concentrations. Moreover, the coated scaffold supported the growth of human Wharton jelly-derived mesenchymal stem cells in 3D culture, and were incubated for 21 days with 1 mM valproic acid as the inducer resulted in improvement in human Wharton jelly-derived mesenchymal stem cells differentiation into neuron-like cells immunoreactivity to nestin, Map2, and neuron specific enolase (NSE), which were also consistent with reverse transcription polymerase chain reaction (RT-PCR) and quantitive Reverse transcription polymerase chain reaction (qRT-PCR) results. The conclusion is that the 3D composite nanofiber poly lactic acid scaffold improved the transdifferentiation of human Wharton jelly-derived mesenchymal stem cells into neuron-like cells.

A hybrid micromixer with planar mixing units.

The application of microfluidic systems in chemical and biological assays has progressed dramatically in recent years. One of the fundamental operations that microfluidic devices must achieve is a high mixing index. Of particular importance is the role of planar mixing units with repetitive obstacles (MURO) in the formation of micromixers. To date, a myriad of planar passive micromixers has been proposed. However, a strategy for the combination of these units to find an efficient planar mixer has not been investigated. As such, five different MURO have been selected to form a "hybrid micromixer," and their combination was evaluated via numerical and experimental methods. These mixing units include ellipse-like, Tesla, nozzle and pillar, teardrop, and obstruction in a curved mixing unit. Since these units have distinctive dimensions, dynamic and geometric similarities were used to scale and connect them. Afterwards, six slots were designated to house each mixing unit. Since the evaluation of all possible unit configurations is not feasible, the design of experiment method is applied to reduce the total number of experiments from 15 625 to 25. Following this procedure, the "hybrid" micromixer proposed here, comprising Tesla, nozzle and pillar, and obstruction units, shows improved performance for a wide range of Re (i.e., mixing index of >90% for Re 0.001-0.1, 22-45) over existing designs. The use of velocity profiles, concentration diagrams, vorticity and circulation plots assist in the analysis of each unit. Comparison of the proposed "hybrid" micromixer with other obstacle-based planar micromixers demonstrates improved performance, indicating the combination of planar mixing units is a useful strategy for building high-performance micromixers.

Cerium oxide nanoparticle-containing poly (ε-caprolactone)/gelatin electrospun film as a potential wound dressing material: In vitro and in vivo evaluation.

In the present study, cerium oxide (CeO2) nanoparticles were incorporated into poly (ε-caprolactone)/gelatin films in order to develop a potential wound dressing material. The wound dressings were prepared by electrospinning of poly (ε-caprolactone)/gelatin (1:1 (w/w)) solutions containing 1.50%, 3% and 6% (w/w) CeO2 nanoparticles. The electrospun films were evaluated regarding their morphology, contact angle, water-uptake capacity, water vapor transmission rate, tensile strength and cellular response. The film containing 1.50% CeO2 nanoparticles was chosen as the optimal dressing for the in vivo study on full-thickness excisional wounds of rats. The study showed that after 2weeks, the wounds treated with the CeO2 nanoparticle-containing dressing achieved a significant closure to nearly 100% compared with the sterile gauze with the nearly 63% of wound closure. Our results provided evidence supporting the possible applicability of CeO2 nanoparticle-containing wound dressing for a successful wound treatment.

Three-dimensional wet-electrospun poly(lactic acid)/multi-wall carbon nanotubes scaffold induces differentiation of human menstrual blood-derived stem cells into germ-like cells.

Infertility caused by the disruption or absence of germ cells is a major and largely incurable medical problem. Germ cells (i.e., sperm or egg) play a key role in the transmission of genetic and epigenetic information across generations. Generation of gametes derived in vitro from stem cells hold promising prospects which could potentially help infertile men and women. Menstrual blood-derived stem cells are a unique stem cell source. Evidence suggests that menstrual blood-derived stem cells exhibit a multi-lineage potential and have attracted extensive attention in regenerative medicine. To maintain the three-dimensional structure of natural extra cellular matrices in vitro, scaffolds can do this favor and mimic a microenvironment for cell proliferation and differentiation. According to previous studies, poly(lactic acid) and multi-wall carbon nanotubes have been introduced as novel and promising biomaterials for the proliferation and differentiation of stem cells. Some cell types have been successfully grown on a matrix containing carbon nanotubes in tissue engineering but there is no report for this material to support stem cells differentiation into germ cells lineage. This study designed a 3D wet-electrospun poly(lactic acid) and poly(lactic acid)/multi-wall carbon nanotubes composite scaffold to compare infiltration, proliferation, and differentiation potential of menstrual blood-derived stem cells toward germ cell lineage with 2D culture. Our primary data revealed that the fabricated scaffold has mechanical and biological suitable qualities for supporting and attachments of stem cells. The differentiated menstrual blood-derived stem cells tracking in scaffolds using scanning electron microscopy confirmed cell attachment, aggregation, and distribution on the porous scaffold. Based on the differentiation assay by RT-PCR analysis, stem cells and germ-like cells markers were expressed in 3D groups as well as 2D one. It seems that poly(lactic acid)/multi-wall carbon nanotubes scaffold-seeded menstrual blood-derived stem cells could be viewed as a novel, safe, and accessible construct for these cells, as they enhance germ-like generation from menstrual blood-derived stem cells.