Neutral wetting brush layers for block copolymer thin films using homopolymer blends processed at high temperatures.

Binary homopolymer blends of two hydroxyl-terminated polystyrene (PS-OH) and polymethylmethacrylate (PMMA-OH) homopolymers (Mn âˆ¼ 16000 g mol(-1)) were grafted on SiO2 substrates by high-temperature (T > 150 °C), short-time (t < 600 s) thermal treatments. The resulting brush layer was tested to screen preferential interactions of the SiO2 substrate with the different symmetric and asymmetric PS-b-PMMA block copolymers deposited on top of the grafted molecules. By properly adjusting the blend composition and the processing parameters, an efficient surface neutralization path was identified, enabling the formation, in the block copolymer film, of homogeneous textures of lamellae or cylinders perpendicularly oriented with respect to the substrate. A critical interplay between the phase segregation of the homopolymer blends and their grafting process on the SiO2 was observed. In fact, the polar SiO2 is preferential for the PMMA-rich phase that forms a homogeneous layer on the substrate, while the PS-rich phase is located at the polymer-air interface. During the thermal treatment, phase segregation and grafting proceed simultaneously. Complete wetting of the PS rich phase on the PMMA rich phase leads to the formation of a PS/PMMA bilayer. In this case, the progressive diffusion of PS chains toward the polymer-SiO2 interface during the thermal treatment allows tuning of the brush layer composition.

PM10 in a background urban site: chemical characteristics and biological effects.

PM10 was sampled in a background urban site in Torino, a northern Italian city. PM10 extracts were tested with THP-1 and A-549 cells to evaluate their effects on cell proliferation, LDH activity, TNFα, IL8 and CYP1A1 expression, and genotoxic damage induction (Comet assay). Through Principal Component Analysis (PCA), it was observed that (1) the aqueous extracts induced the inhibition of cell proliferation in the warm season that clustered together to total ions, (2) organic extracts determined a winter cell viability reduction and (3) there was a genotoxic effect associated with PAH and metal concentrations. The analysed low PAH levels were unable to induce significant CYP1A1 expression. The results obtained confirmed that PM composition and seasonality play an important role in particle-induced toxicity. The presence of PM10-induced biological effects at a low polluted site suggested that a reduction of PM10 mass did not seem to be sufficient to reduce its toxicity.

Rapid thermal processing of self-assembling block copolymer thin films.

Self-assembling block copolymers generate nanostructured patterns which are useful for a wide range of applications. In this paper we demonstrate the capability to control the morphology of the self-assembling process of PS-b-PMMA diblock copolymer thin films on unpatterned surfaces by means of fast thermal treatment performed in a rapid thermal processing machine. The methodology involves the use of radiation sources in order to rapidly drive the polymeric film above the glass transition temperature. Highly ordered patterns were obtained for perpendicular-oriented cylindrical and lamellar PS-b-PMMA block copolymers in less than 60 s. This approach offers the unprecedented opportunity to investigate in detail the kinetics of the block copolymer self-assembly during the early stages of the process, providing a much deeper understanding of the chemical and physical phenomena governing these processes.

Study on the photodegradation of amidosulfuron in aqueous solutions by LC-MS/MS.

Sulfonylurea herbicides are extensively widespread for the protection of a variety of crops and vegetables because of their low application rates, high selectivity and low persistency in the environment; unfortunately, their low persistence does not always correspond to a lower toxicity, since new species potentially more toxic and stable than the precursor herbicides can form, owing to natural degradation processes. Here, the photodegradation of amidosulfuron in aqueous solutions was studied by high-performance liquid chromatography with diode array detection and tandem mass spectrometry to identify the degradation products in order to outline the environmental fate of the molecules generating from the simulation of one of the natural processes that can occur, i.e., photoinduced degradation. The photodegradation process results in a first order kinetic reaction with a t 1/2 value of 276 h (11.5 days) and a kinetic constant of 0.0027 h(-1), and three possible degradation products were identified. The results obtained are then compared to those obtained in previous works carried out in comparable experimental conditions about nicosulfuron and tribenuron-methyl, two sulfonylurea herbicides belonging to different classes, and to literature data: hypotheses on the existence of preferential degradation pathways are then drawn, in consequence of the molecular structure of the sulfonylurea pesticide. In particular, the use of organic solvents to obtain complete solubilization of the sample plays a fundamental role and deeply influences the degradation processes that, therefore, not always fully adhere to the actual natural photodegradation pathways. Moreover, considerations about toxicity were driven since the complete mineralisation of the sample is not reached: even when the parent pesticides are totally degraded, they are, however, transformed into other organic compounds showing, if subject to ecotoxicological tests, at least the same toxicity of the precursor herbicides. The evidence here presented suggests that, at least for the class of sulfonylurea pesticides, their professed low persistence actually does not produce any real advantage.

Ultrastructural analysis of different-made staplers' staples.

AIM: Recently, Chinese-made mechanical staplers with lower price respect to American-made ones have been introduced in clinical practice. In literature, small case series compare the clinical outcomes of different staplers concluding that the new stapler devices perform as well as the American ones. The aim of this study is to compare with an ultrastructural analysis the staples of different staplers in order to verify the existence of differences that might explain significant price disparity and condition clinical outcomes. METHODS: Each stapler was subjected to morphological analysis, energy dispersive X-Ray spectroscopy, metal release assessment followed by inductively coupled plasma mass spectroscopy. P-values were considered statistically significant when <0.05. RESULTS: Autosuture staples have square section whereas the other American one and Chinese made staples have round sections. Roughness index and chips presence before and after ageing tests were comparable for all samples except for Ethicon Endo-Surgery stapler. Energy dispersive X-Ray spectroscopy showed that all staplers are made of pure Titanium but Ethicon Endo-Surgery staples are made with an alloy. Metal release analysis release statistically significant differences between samples in simulated body fluid 20 days solution (P=0.002) and in Aquaregia at 14 days solution. Discussion. Stapling devices have became routinely used in gastrointestinal surgery mainly because of operative time reduction. Recently, new Chinese-made mechanical staplers, with significantly lower prices, have been introduced in clinical practice. In literature, there are some studies that compare clinical outcomes of American-made and Chinese-made staplers on small groups of patients but doesn't exist any work which consider structural differences between traditional and new devices. In our study, for the first time, we propose a comparison between two American-made staplers and three Chinese-made staplers which evaluate morphology, metal composition and chemical staples release. CONCLUSION: Our study suggest that there are some ultrastructural differences between commercially available staplers with no correlation to price disparity. More studies are needed to confirm our results and to verify if our findings could condition clinical outcomes.

HPLC-DAD-MSn to investigate the photodegradation pathway of nicosulfuron in aqueous solution.

The environmental interest of sulfonylurea herbicides was derived from the possibility of diffusion and penetration of these herbicides in the deepest layers of the ground, in particular in sandy or clay-poor soils, up to the ground waters; another interest of the study is their natural degradation pathway which leads to the formation of new species that are potentially more toxic and stable than the precursor herbicides. In this case, a lower persistence in the environment unfortunately does not correspond to a lower toxicity: hence, the importance of the identification of the species can be potentially formed. Here, nicosulfuron, a typical sulfonylurea herbicide, is considered in order to outline the environmental fate of the molecules generating from the simulation of one of the natural processes that can occur, i.e. photoinduced degradation. Aqueous nicosolfuron solutions underwent a simulated sun irradiation: the new species formed during the degradation process were identified by HPLC-DAD-MS/MS and a degradation pathway was proposed. The effect of temperature and the contribution of the hydrolysis were also evaluated. The use of ESI in both positive ion (PI) and negative ion (NI) mode and APCI in PI mode permits to obtain integrated information about the transformation products that can form; moreover, a study of the total ion chromatogram followed by the extraction of the SIM chromatograms of the most intense m/z signals made possible the identification of five possible photodegradation transformation products.

DNA damage in A549 cells exposed to different extracts of PM(2.5) from industrial, urban and highway sites.

The aim of this research is to investigate the role played by the chemical fraction of PM(2.5) in the DNA damage induction in human lung cells (A549): in particular the effects of samples collected in urban, industrial and highway sites were compared. Organic and water-soluble extracts of PM(2.5) were analysed to quantify PAHs (by GC-MS technique) and metals (by ICP-MS technique) and tested on A549 cells to evaluate, by the Comet assay (without and with Fpg enzyme), genotoxic and oxidative damage. The chemical analysis showed a variability of PAH composition in PM organic extracts of the three different sites and pointed out the presence of 14 metals (being Fe, Cu, Zn, Sb and Ba the most abundant) in all the PM water extracts. Regarding the biological effect, all the PM(2.5) organic extracts caused a significant dose-dependent increase of the A549 DNA damage. The genotoxic effect was related to the PM(2.5) PAH content and the highest effect was observed for the highway site sample. The DNA oxidative damages were observed for the PM(2.5) water extracts of the samples collected in industrial and highway sites. The extent of the oxidative damage seems to be related to the kind and concentration of the metals present. The results of this study emphasize the importance of PM chemical composition on the biological effects and highlight the need, when evaluating the effects on health and exposure management, to always consider, beside size and concentration of PM, also their qualitative composition.

The use of clays to sequestrate organic pollutants. Leaching experiments.

Leaching experiments are performed from clay-pollutant systems in order to evaluate the capability of clays to sequestrate organic pollutants from wastewaters. Reference kaolinite KGa-1b, montmorrillonite SWy-2 and reference soil BCR-700 are the sorbent materials. 2,4,6-trichloroaniline (2,4,6-TCA) and 4-chlorophenol (4-CP) are the typical pollutants, sorbed at amounts of 10.0 mg g(-1) and 5.8 mg g(-1) on SWy-2 and 7.3 mg g(-1) and 2.2 mg g(-1) on KGa-1b, respectively. The leaching agents are ultrapure water and model solutions of acid rain and surface waters that simulate meteoric leaching. 1.0mM HNO(3), 1.0mM H(2)SO(4) solutions and a methanol/water 50/50 (v/v) mixture simulate leaching agents of industrial source. The results are compared and the preferential capability of the clays to sequestrate the more lipophilic 2,4,6-TCA is evidenced. The bond interactions are discussed and explained through preferential adsorption reactions. For montmorrillonite also a simultaneous intercalation in the phyllosilicate interlayer is proposed.

Photodegradation of E110 and E122 dyes in a commercial aperitif. A high performance liquid chromatography-diode array-tandem mass spectrometry study.

A commercial aperitif containing E110 and E122 dyes is exposed to photo-irradiation in solar box under conditions chosen to simulate sun light irradiation. After 16 days of irradiation the red-coloured aperitif assumes a very pale yellow colour. HPLC-diode array-MS/MS analysis evidences the presence in the commercial aperitif of some impurities with naphthalene-based structures. The structures for the photodegradation products are proposed.

A new hydrophilic interaction liquid chromatography tandem mass spectrometry method for the simultaneous determination of seven biogenic amines in cheese.

An HILIC-PI APCI MS/MS method is developed for the determination of seven biogenic amines (cadaverine, histamine, putrescine, spermidine, spermine, tryptamine and tyramine) in cheese. Their presence and relative amounts give useful information about freshness, level of maturing, quality of storage and cheese typicization. The major drawback in the analysis is represented by the relevant matrix effect and the general unbalanced concentrations of the different amines in cheese. The method proposed represents an improvement with respect to an HPLC-MS/MS method already developed in this laboratory. The new method permits better sensitivities it makes use of a Waters Atlantis HILIC (150.0 mm x 2.1 mm i.d., 3 microm) stationary phase and of a mobile phase of acetonitrile and ammonium formate 50.0 mM in ultrapure water brought to pH 4.00 for formic acid, flowing under gradient conditions. The chromatographic system is interfaced with a 3200QTrap LC-MS/MS system (Applied Biosystem, Foster City, CA, USA) by a Turbo V interface equipped with Heated Nebuliser (APCI) and Turbo Ion Spray (TIS) probes. LOQ values lower than 10 microg L(-1) are obtained. The method is applied in the analysis of Castelmagno cheese.

High performance liquid chromatography/tandem mass spectrometry determination of biogenic amines in typical Piedmont cheeses.

The paper presents a new HPLC method, hyphenated with mass spectrometry detection, for the separation and determination of the biogenic amines that are most commonly present in cheese, namely cadaverine, histamine, spermidine, spermine, tyramine and tryptamine. The HPLC-MS/MS method is validated by comparison of the results with those obtained through a literature HPLC-UV determination, based on a pre-column dansyl chloride derivatisation step. The intercalibration is based on the statistical t-test for multiple samples that allows to compare simultaneously the results obtained with the two methods for more analytes and to decide, at a prefixed confidence level, if the two methods are inter-changeable. The new HPLC-MS/MS method, employed in selected reaction monitoring (SRM) mode, permits to achieve for standard solutions limit of detection (LOD) values ranging from 1.7 to 22.5 microg L(-1) and LOQ (limit of quantitation) values ranging from 5.6 to 68.2 microg L(-1). In order to apply the method in the analysis of cheeses, LOD and LOQ values have also been evaluated in "ricotta" cheese, in order to take as possible into account the matrix interference. In these conditions LODs range between 5.1 and 35.0 microg L(-1) and LOQs between 14.2 and 101.2 microg L(-1). The whole methodology, comprehensive of the homogenization-extraction process and HPLC-MS/MS analysis, has been applied in the analysis of three typical Piedmont (North-West Italy) cheeses, known as Toma Piemontese, Raschera and Castelmagno.

HPLC-MSn and GC-MS methods to study sunlight and UV-lamp degradations of 1-amino-5-naphthalene sulfonate.

HPLC-DAD, HPLC-MS/MS, GC-MS and spectrophotometric methods are employed to investigate the degradation process of sodium 1-amino-5-naphthalene sulfonate (1A5NS) aqueous solutions, when exposed to sunlight and UV-lamp (254 nm) irradiations. Experimental results show that both sunlight and 254 nm UV-lamp irradiations destroy the chemical and give rise to major degradation products, characterised by the same m/z ratios. Degradation times are lower for sunlight irradiation, for which a t(1/2) value of 137.4 min has been evaluated, in comparison with the value of t(1/2) of 26.8 min, observed for UV-lamp irradiation. The degradation pathway and the structures of the degradation products are proposed.

Sorption of pesticides on kaolinite and montmorillonite as a function of hydrophilicity.

Pesticides and other organic species are adsorbed by soil via different mechanisms, with bond strengths that depend on the properties of both the soil and the pesticide. Since the clay fraction in soil is a preferential sorbent for organic matter, reference kaolinite and montmorillonite are useful models for studying the mechanism and the strength of sorption. This paper presents the results of batch experiments to investigate the interactions of kaolinite KGa-1 and montmorillonite SWy-1 with the following pesticides and organic species resulting from the natural degradation of pesticides in the environment: atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), simazine (1-chloro-3,5-bisethylamino-2,4,6-triazine), diuron [1,1-dimethyl-3-(3,4-dichlorophenyl)urea], aniline, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol. Each of these chemicals has different hydrophilicity. Systems containing 2.0 g of clay were put in contact with 100.0 mL of solutions of the pesticides at known concentration ranging from 1.0 to 5.0 mg/L, and the amount of solute adsorbed was evaluated through RP-HPLC analysis of the pesticide still present in the aqueous suspension. To test for electrostatic interactions between the clay surface and the pesticides, potentiometric titration was used to determine the permanent surface charge of clays. Experiments were performed at different pH values. The results indicate that, for the chemicals studied, neutral molecules are preferentially retained relative to ionized ones, and that montmorillonite is a more effective sorbent than kaolinite.

HPLC-UV and HPLC-MSn multiresidue determination of amidosulfuron, azimsulfuron, nicosulfuron, rimsulfuron, thifensulfuron methyl, tribenuron methyl and azoxystrobin in surface waters.

The paper presents a new HPLC method, with UV and MS(n) detection, for the determination of seven pesticides, including the sulfonylurea herbicides amidosulfuron, azimsulfuron, nicosulfuron, rimsulfuron, thifensulfuron methyl, tribenuron methyl, and the fungicide azoxystrobin characterised by a methoxyacrilate structure. The methodology consists of a preconcentration/SPE (solid phase extraction) step and HPLC-UV (240 nm detection wavelength)-MS(n) analysis. Under the optimised conditions and after a 1000/1 preconcentration factor, the limits of detection were lower than 14.5 ng L(-1) for UV detection and lower than 8.1 ng L(-1) for MS detection. The limits of quantification were lower than 48.3 ng L(-1) in UV detection and than 26.9 ng L(-1) in MS(n) detection. The analysis of two samples, spiked with a mixture of the pesticides at threshold level concentrations, gave more than 60% recovery.

Statistical evaluation of recovery of 3,4-dichloroaniline in soil as function of particle size and analyte concentration.

A great mean value of recovery for extraction of 3,4-dichloroaniline from a soil is calculated from individual recovery values evaluated for four different fractions of the soil. Then the uncertainty associated to this great mean recovery is calculated and used to know whether to apply or not the correction in routine analysis performed for the same kind of soil and the same analyte. The most representative fractions that, as a function of particle size, can be identified in a soil are: sand (2.000-0.063mm), coarse silt (0.063-0.020mm), fine silt (0.020-0.002mm) and clay (

Sorption studies of chloroanilines on kaolinite and montmorillonite.

Batch experiments have been performed in order to evaluate the ability of the two reference clays kaolinite (KGa-1) and Na-montmorillonite (SWy-1) to retain three representative chloroanilines: 3-chloroaniline, 3,4-dichloroaniline and 2,4,6-trichloroaniline. Systems containing the clay mineral and the pollutant solution (at concentration levels ranging between 1.0 and 10.0mg/L) were considered and RP-HPLC methods were employed to follow the sorption processes as a function of time. The results indicate that montmorillonite shows a general higher sorption capacity with respect to kaolinite and that for both the reference clays, in the concentration range investigated, the amount of pollutant sorbed increases with concentration. The sorption coefficient K(d) ranges between 0.0030 L/g for the system 3-chloroaniline-kaolinite and 0.0488L/g for the system 2,4,6-trichloroaniline-montmorrillonite. The most lipophilic trichloroaniline shows the greater sorption. X-ray analyses suggest for kaolinite a preferential sorption onto the mineral surface, while for montmorillonite a progressive swelling of the structure is observed, likely due to sorption processes that also take place in the interlayer.

Oxidative degradation of food dye E133 Brilliant Blue FCF Liquid chromatography-electrospray mass spectrometry identification of the degradation pathway.

This paper is devoted to the evaluation of the degradation pathway of the E133 Brilliant Blue FCF (C.I. 42090) that is largely used in the food industry. The degradation is studied in oxidation conditions obtained by addition of potassium persulfate at different persulfate to dye molar ratios under natural sunlight irradiation. The degradation pathway of the dye passes through a species coloured in dark blue and then gives rise to uncoloured species. Due to the low volatility and the poor thermal stability of the dye, reversed-phase liquid chromatography associated to mass spectrometry and tandom mass spectrometry was employed to follow the kinetics of degradation and identify some intermediates. The identification of organic species still present in the decoloured dye and the value of COD obtained in these conditions show evidence that complete decolorization does not correspond to complete mineralisation. No direct information of toxicity is available for the uncoloured degradation products but the further formation of aromatic amines can not be excluded.

Optimization by experimental design and artificial neural networks of the ion-interaction reversed-phase liquid chromatographic separation of twenty cosmetic preservatives.

Particular attention are recently receiving antimicrobial agents added as preservatives in hygiene and cosmetics commercial products, since some of them are suspected to be harmful to the human health. The preservatives used belong to different classes of chemical species and are generally used in their mixtures. Multi-component methods able to simultaneously determinate species with different chemical structure are therefore highly required in quality control analysis. This paper presents an ion interaction RP-HPLC method for the simultaneous separation of the 20 typical antimicrobial agents most used in cosmetics and hygiene products, that are: benzoic acid, salicylic acid, 4-hydroxybenzoic acid, methyl-, ethyl-, propyl-, butyl-, benzyl-benzoate, methyl-, ethyl-, propyl-, butyl-, benzyl-paraben, o-phenyl-phenol, 4-chloro-m-cresol, triclocarban, dehydroacetic acid, bronopol, sodium pyrithione and chlorhexidine. For the development of the method and the optimization of the chromatographic conditions, an experimental design was planned and models were built by the use of artificial neural network to correlate the retention time of each analyte to the variables and their interactions. The neuronal models developed showed good predictive ability and were used, by a grid search algorithm, to optimize the chromatographic conditions for the separation of the mixture.

Intercalibration of chromatographic methods for auxino phytodrugs in Solanaceae.

Three chromatographic methods are considered for the determination in Solanaceae of auxino-similar phytodrugs, so called because their structure resembles an auxine plant hormone. The phytodrugs studied were: 2,4-dichlorophenoxyacetic acid, 2,4-dichlorophenoxypropionic acid, 2,4-dichlorophenoxybutyric acid, 2-methyl-4-chlorophenoxyacetic acid, 2,4,5-trichlorophenoxyacetic acid, naphthylacetic acid and 2-naphthyloxyacetic acid. Three chromatographic methods, respectively based on ion-interaction HPLC, GC-MS with intra-injector derivatisation and CC-MS with pre-injection derivatisation, were developed, optimised and validated. A comparative discussion of the advantages/disadvantages of the methods suggests a strategy for their preferential use, that is essentially a function of the matrix complexity.

Simultaneous reversed-phase high-performance liquid chromatographic separation of mono-, di-and trichloroanilines through a gradient elution optimised by experimental design.

A new RP-HPLC method for the simultaneous determination of the 13 mono-, di- and trichloroanilines has been developed. In order to obtain the analyte resolution within an acceptable analysis time, a gradient elution program has been optimised through the use of an experimental design and a grid search algorithm. The optimized conditions provided the resolution of all the analytes in less than 80 min. The primary validation of the analytical method gave limit of detection values ranging between 0.02 and 0.06 mg/l and very good linearity of the calibration curves.