Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
1.
J Magn Reson Imaging ; 42(1): 175-9, 2015 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-25256847

RESUMO

BACKGROUND: Inner volume (IV) excitation was explored with respect to scan time reduction of cardiac gated double inversion recovery multi-echo fast spin echo (MEFSE) to measure the transverse relaxation time (T2 ) in the myocardium. METHODS: The IV imaging was achieved by applying orthogonal slice selection for the excitation and refocusing pulses. The T2 map accuracy was investigated using different excitation and refocusing pulses. The performance of IV-MEFSE was compared with MEFSE on phantoms and eight healthy volunteers, acquiring eight echo times in a single breath-hold. RESULTS: Compared with MEFSE, IV-MEFSE allowed a scan time reduction from 26 s to 16 s, but caused a T2 overestimation of approximately 10% due to stimulated echoes. CONCLUSION: IV successfully reduced the scan time to a single breath-hold feasible for many patients and remarkably facilitated the scan prescription, because there was no image aliasing concern. Care should be taken in using IV for T2 mapping because of T2 relaxation time overestimation.


Assuntos
Algoritmos , Técnicas de Imagem de Sincronização Cardíaca/métodos , Coração/anatomia & histologia , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Sensibilidade e Especificidade
2.
MAGMA ; 28(3): 207-15, 2015 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-25200814

RESUMO

OBJECT: The investigation of three-dimensional radial, zero-echo time (TE) imaging for high-resolution, free-breathing magnetic resonance (MR) lung imaging using prospective and retrospective motion correction. MATERIALS AND METHODS: Zero-TE was implemented similarly to the rotating-ultra-fast-imaging-sequence, providing 3D, isotropic, radial imaging with proton density contrast. Respiratory motion was addressed using prospective triggering (PT), prospective gating (PG) and retrospective gating (RG) with physiological signals obtained from a respiratory belt and interleaved pencil beam and DC navigators. The methods were demonstrated on four healthy volunteers at 3T. RESULTS: 3D, radial zero-TE imaging with high imaging bandwidth and nominally zero echo-time enables efficient capture of short-lived signals from the lung parenchyma and the vessels. Compared to Cartesian encoding, unaccounted for free-breathing respiration resulted in only benign blurring artifacts confined to the origin of motion. Breath holding froze respiration but achieved only limited image resolution (~1.8 mm, 30 s). PT and PG obtained similar quality expiratory-phase images at 1.2 mm resolution in ~6 min scan time. RG allowed multi-phase imaging in ~15 min, derived from eight individually stored averages. CONCLUSION: Zero-TE appears to be an attractive pulse sequence for 3D isotropic lung imaging. Prospective and retrospective approaches provide high-quality, free-breathing MR lung imaging within reasonable scan time.


Assuntos
Artefatos , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Pulmão/anatomia & histologia , Técnicas de Imagem de Sincronização Respiratória/métodos , Algoritmos , Humanos , Reconhecimento Automatizado de Padrão/métodos , Reprodutibilidade dos Testes , Mecânica Respiratória , Sensibilidade e Especificidade
3.
Comput Biol Med ; 43(12): 2256-62, 2013 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-24290942

RESUMO

BACKGROUND: Reconstruction methods for Non-Cartesian magnetic resonance imaging have often been analyzed using the root mean square error (RMSE). However, RMSE is not able to measure the level of structured error associated with the reconstruction process. METHODS: An index for geometric information loss was presented using the 2D autocorrelation function. The performances of Least Squares Non Uniform Fast Fourier Transform (LS-NUFFT) and gridding reconstruction (GR) methods were compared. The Direct Summation method (DS) was used as reference. For both methods, RMSE and the loss in geometric information were calculated using a digital phantom and a hyperpolarized (13)C dataset. RESULTS: The performance of the geometric information loss index was analyzed in the presence of noise. Comparing to GR, LS-NUFFT obtained a lower RMSE, but its error image appeared more structured. This was observed in both phantom and in vivo experiments. DISCUSSION: The evaluation of geometric information loss together with the reconstruction error was important for an appropriate performance analysis of the reconstruction methods. The use of geometric information loss was helpful to determine that LS-NUFFT loses relevant information in the reconstruction process, despite the low RMSE.


Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética/métodos , Modelos Teóricos , Humanos
4.
Int J Numer Method Biomed Eng ; 29(5): 561-73, 2013 May.
Artigo em Inglês | MEDLINE | ID: mdl-23408698

RESUMO

Non-Cartesian acquisition strategies are widely used in MRI to dramatically reduce the acquisition time while at the same time preserving the image quality. Among non-Cartesian reconstruction methods, the least squares non-uniform fast Fourier transform (LS_NUFFT) is a gridding method based on a local data interpolation kernel that minimizes the worst-case approximation error. The interpolator is chosen using a pseudoinverse matrix. As the size of the interpolation kernel increases, the inversion problem may become ill-conditioned. Regularization methods can be adopted to solve this issue. In this study, we compared three regularization methods applied to LS_NUFFT. We used truncated singular value decomposition (TSVD), Tikhonov regularization and L1-regularization. Reconstruction performance was evaluated using the direct summation method as reference on both simulated and experimental data. We also evaluated the processing time required to calculate the interpolator. First, we defined the value of the interpolator size after which regularization is needed. Above this value, TSVD obtained the best reconstruction. However, for large interpolator size, the processing time becomes an important constraint, so an appropriate compromise between processing time and reconstruction quality should be adopted.


Assuntos
Análise de Fourier , Processamento de Imagem Assistida por Computador/métodos , Processamento de Sinais Assistido por Computador , Abdome/anatomia & histologia , Humanos , Análise dos Mínimos Quadrados , Imageamento por Ressonância Magnética/métodos , Imagens de Fantasmas
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...