A Low-Cost, Passive Release Device for the Surveillance and Control of Mosquitoes.

Mosquitoes continue to be a major threat to global health, and the ability to reliably monitor, catch, and kill mosquitoes via passive traps is of great importance. Global, low-cost, and easy-to-use outdoor devices are needed to augment existing efforts in mosquito control that combat the spread of disease, such as Zika. Thus, we have developed a modular, portable, non-powered (passive), self-contained, and field-deployable device suitable for releasing volatiles with a wide range of applications such as attracting, repelling, and killing mosquitoes. This unique device relies on a novel nested wick and two-reservoir design that achieves a constant release of volatiles over several hundred hours. Devices loaded with one of either two compounds, geraniol or 1-methylpiperazine (MP), were tested in a controlled environment (32 °C and 70% relative humidity), and both compounds achieved a constant release from our devices at a rate of 2.4 mg/h and 47 mg/h, respectively. The liquid payload can be volatile attractants or repellants as well as mosquitocide-containing feeding solutions for capture and surveillance. This low-cost device can be utilized for both civilian and military mosquito control purposes, but it will be particularly important for protecting those in economically repressed environments, such as sub-Saharan Africa and Central and South America.

Detection and quantification of trace airborne transfluthrin concentrations via air sampling and thermal desorption gas chromatography-mass spectrometry.

A rapid thermal desorption-gas chromatography-electron ionization-mass spectrometry (TD-GC-EI-MS) method for airborne transfluthrin detection is studied. Active air sampling of 9 L over 1 h at 23 °C through a Tenax®-loaded tube resulted in efficient capture of airborne transfluthrin. Subsequent thermal desorption was employed to achieve an LOD of 2.6 ppqv (parts per quadrillion by volume). A minimum primary desorption temperature of 300 °C is necessary for optimal recovery of sample from the Tenax® adsorbent. The matrix effects of indoor air lead to an error of 10.9% and 10.5% recovery of sample (10 pg and 100 pg loaded tubes, respectively). The linear range was 74-74,000 ppqv with a correlation coefficient of 0.9981. Active air sampling of a novel passive release device revealed a ∼150 pg/L airborne concentration gradient over 1 m, providing spatial characterization of the device's performance. This efficient method allows for the remote collection of samples and rapid analysis of airborne transfluthrin from industrial applications, optimization studies of commercial products as well as domestic/household monitoring.