Deposition Measurements From the Full-Scale Radiological Dispersal Device Field Trials.

In 2012, Defence Research and Development Canada led a series of experiments, titled the Full-Scale Radiological Dispersal Device Field Trials, in which short-lived radioactive material was explosively dispersed and the resulting plume and deposition were characterized through a variety of methods. Presented here are the results of a number of measurements that were taken to characterize the radioactive ground deposition. These included in situ gamma measurements, deposition filter samples, and witness plate measurements that were taken in situ with handheld beta survey meters. The results from the different measurement techniques are compared to each other and to a simple deposition model. Results showed that approximately 3% of the original source activity was deposited in the immediate vicinity of ground zero, and an additional 15-30% of the original activity was deposited within 450 m of ground zero. Implications of these results for emergency response are discussed.

Particle Density Using Deposition Filters at the Full Scale RDD Experiments.

During the Full-Scale Radiological Dispersal Device (FSRDD) Field Trials carried out in Suffield, Alberta, Canada, several suites of detection equipment and software models were used to measure and characterize the ground deposition. The FSRDD Field Trials were designed to disperse radioactive lanthanum of known activity to better understand such an event. This paper focuses on one means of measuring both concentration and the particle size distribution of the deposition using electrostatic filters placed around the trial site to collect deposited particles for analysis. The measurements made from ground deposition filters provided a basis to guide modeling and validate results by giving insight on how particles are distributed by a plume.