Outlook on genome editing application to cattle.

In livestock industry, there is growing interest in methods to increase the production efficiency of livestock to address food shortages, given the increasing global population. With the advancements in gene engineering technology, it is a valuable tool and has been intensively utilized in research specifically focused on human disease. In historically, this technology has been used with livestock to create human disease models or to produce recombinant proteins from their byproducts. However, in recent years, utilizing gene editing technology, cattle with identified genes related to productivity can be edited, thereby enhancing productivity in response to climate change or specific disease instead of producing recombinant proteins. Furthermore, with the advancement in the efficiency of gene editing, it has become possible to edit multiple genes simultaneously. This cattle breed improvement has been achieved by discovering the genes through the comprehensive analysis of the entire genome of cattle. The cattle industry has been able to address gene bottlenecks that were previously impossible through conventional breeding systems. This review concludes that gene editing is necessary to expand the cattle industry, improving productivity in the future. Additionally, the enhancement of cattle through gene editing is expected to contribute to addressing environmental challenges associated with the cattle industry. Further research and development in gene editing, coupled with genomic analysis technologies, will significantly contribute to solving issues that conventional breeding systems have not been able to address.

Current status and future of gene engineering in livestock.

The application of gene engineering in livestock is necessary for various reasons, such as increasing productivity and producing disease resistance and biomedicine models. Overall, gene engineering provides benefits to the agricultural and research aspects, and humans. In particular, productivity can be increased by producing livestock with enhanced growth and improved feed conversion efficiency. In addition, the application of the disease resistance models prevents the spread of infectious diseases, which reduces the need for treatment, such as the use of antibiotics; consequently, it promotes the overall health of the herd and reduces unexpected economic losses. The application of biomedicine could be a valuable tool for understanding specific livestock diseases and improving human welfare through the development and testing of new vaccines, research on human physiology, such as human metabolism or immune response, and research and development of xenotransplantation models. Gene engineering technology has been evolving, from random, time-consuming, and laborious methods to specific, time-saving, convenient, and stable methods. This paper reviews the overall trend of genetic engineering technologies development and their application for efficient production of genetically engineered livestock, and provides examples of technologies approved by the United States (US) Food and Drug Administration (FDA) for application in humans. [BMB Reports 2024; 57(1): 50-59].

Generation of double knockout cattle via CRISPR-Cas9 ribonucleoprotein (RNP) electroporation.

BACKGROUND: Genome editing has been considered as powerful tool in agricultural fields. However, genome editing progress in cattle has not been fast as in other mammal species, for some disadvantages including long gestational periods, single pregnancy, and high raising cost. Furthermore, technically demanding methods such as microinjection and somatic cell nuclear transfer (SCNT) are needed for gene editing in cattle. In this point of view, electroporation in embryos has been risen as an alternative. RESULTS: First, editing efficiency of our electroporation methods were tested for embryos. Presence of mutation on embryo was confirmed by T7E1 assay. With first combination, mutation rates for MSTN and PRNP were 57.6% ± 13.7% and 54.6% ± 13.5%, respectively. In case of MSTN/BLG, mutation rates were 83.9% ± 23.6% for MSTN, 84.5% ± 18.0% for BLG. Afterwards, the double-KO embryos were transferred to surrogates and mutation rate was identified in resultant calves by targeted deep sequencing. Thirteen recipients were transferred for MSTN/PRNP, 4 calves were delivered, and one calf underwent an induction for double KO. Ten surrogates were given double-KO embryos for MSTN/BLG, and four of the six calves that were born had mutations in both genes. CONCLUSIONS: These data demonstrated that production of genome edited cattle via electroporation of RNP could be effectively applied. Finally, MSTN and PRNP from beef cattle and MSTN and BLG from dairy cattle have been born and they will be valuable resources for future precision breeding.

Supplement of secreted recombinant low molecular weight human fibroblast growth factor 2 in culture media enhances in vitro bovine maturation.

With the annual increase in in vitro bovine embryo production, understanding oocyte maturation is becoming more important. Previous studies have shown that oocyte maturation can be improved by adding bovine additives to in vitro maturation media. Among the additives, human fibroblast growth factor 2 (hFGF2) is well known for its positive influence on the growth rate and quality of cells and oocytes. However, the effect of LMW-hFGF2, one of the isoforms of hFGF2, on bovine in vitro maturation has not yet been identified. Therefore, the goal of this study was to elucidate the effect of LMW-hFGF2 on bovine oocyte maturation. Vectors expressing LMW-hFGF2 were cloned and transfected into cells. Afterward, secretion of LMW-hFGF2 from cells was confirmed, and used to assess the effect LMW-hFGF2 on cells and bovine oocytes. LMW-hFGF2 improved bovine oocyte maturation and embryo developmental competence. Laboratories can use LMW-hFGF2 in bovine oocyte culture media to improve in vitro embryo production success rates.

Germline transmission of MSTN knockout cattle via CRISPR-Cas9.

Although the production of several founder animals (F0) for gene editing in livestock has been reported in cattle, very few studies have assessed germline transmission to the next generation due to the long sexual maturation and gestation periods. The present study aimed to assess the germline transmission of MSTN mutations (-12bps deletion) in MSTN mutant F0 male and female cattle. For this purpose, oocytes and semen were collected after the sexual maturation of MSTN cattle, and embryos produced by in vitro fertilization were analyzed. In addition, the embryos were subjected to additional gene (PRNP) editing using electroporation. Embryos produced by in vitro fertilization with MSTN male and female cattle were transferred to a surrogate, and one calf was successfully born. MSTN heterozygous mutation was shown by sequencing of the F1 calf, which had no health issues. As a further experiment, using electroporation, additional gene-edited embryos fertilized with the MSTN male sperm showed a high mutation rate of PRNP (86.2 ± 3.4%). These data demonstrate that the cattle produced through gene editing matured without health issues and had transmitted MSTN mutation from the germ cells. Also, additional mutation of embryos fertilized with the MSTN male sperm could enable further mutagenesis using electroporation.

Application of transposon systems in the transgenesis of bovine somatic and germ cells.

BACKGROUND: Several DNA transposons including PiggyBac (PB), Sleeping Beauty (SB), and Tol2 have been applied as effective means for of transgenesis in many species. Cattle are not typically experimental animals, and relatively little verification has been presented on this species. Thus, the goal here was to determine the applicability of three transposon systems in somatic and embryo cells in cattle, while also investigating which of the three systems is appropriate for each cell type. Green fluorescent protein (GFP)-expressing transposon systems were used for electroporation and microinjection in the somatic cells and embryo stage, respectively. After transfection, the GFP-positive cells or blastocysts were observed through fluorescence, while the transfection efficiency was calculated by FACS. RESULTS: In bovine somatic cells, the PB (63.97 ± 11.56) showed the highest efficiency of the three systems (SB: 50.74 ± 13.02 and Tol2: 16.55 ± 5.96). Conversely, Tol2 (75.00%) and SB (70.00%) presented a higher tendency in the embryonic cells compared to PB (42.86%). CONCLUSIONS: These results demonstrate that these three transposon systems can be used in bovine somatic cells and embryos as gene engineering experimental methods. Moreover, they demonstrate which type of transposon system to apply depending on the cell type.

Production of MSTN-mutated cattle without exogenous gene integration using CRISPR-Cas9.

Many genome-edited animals have been produced using clustered regularly interspaced short palindromic repeats (CRISPR)-Cas9 technology to edit specific genes. However, there are few guidelines for the application of this technique to cattle. The goal of this study was to produce trait-improved cattle using the genome-editing technology CRISPR-Cas9. Myostatin (MSTN) was selected as a target locus, and synthetic mRNA of sgRNA and Cas9 were microinjected into fertilized bovine embryos in vitro. As a result, 17 healthy calves were born, and three of them showed MSTN mutation rates of 10.5%, 45.4%, and 99.9%, respectively. Importantly, the offspring with the 99.9% MSTN mutation rate had a biallelic mutation (-12 bps) and a double-muscling phenotype. In conclusion, we demonstrate that the genome-editing technology CRISPR-Cas9 can produce genetically modified calves with improved traits.

Change of Ruminoreticular Temperature and Body Activity before and after Parturition in Hanwoo (Bos taurus coreanae) Cows.

How do body temperature and activity change before and after parturition in pregnant cows? Changes in body temperature such as ruminal, rectal, and vaginal temperature during the parturition have been reported, but there are no results of the simultaneous observation of body temperature and activity. The aim of this study was to simultaneously confirm changes in the ruminoreticular temperature and body activity before and after parturition using the ruminoreticular bio-capsule sensor every 1 h. The 55 pregnant cows were used for the experiment, the ruminoreticular bio-capsule sensor was inserted and stabilized, and the ruminoreticular temperature and body activity were measured. The ruminoreticular temperature was lower by 0.5° from -24 h to -3 h in parturition compared to 48 h before parturition and then recovered again after parturition. Body activity increased temporarily at the time of parturition and 12 h after parturition. Therefore, the ruminoreticular temperature and body activity before and after parturition was simultaneously confirmed in pregnant cows.