Experimental Evidence and Mechanistic Description of the Phenolic H-Transfer to the Cu2O2 Active Site of oxy-Tyrosinase.

Tyrosinase is a ubiquitous coupled binuclear copper enzyme that activates O2 toward the regioselective monooxygenation of monophenols to catechols via a mechanism that remains only partially defined. Here, we present new mechanistic insights into the initial steps of this monooxygenation reaction by employing a pre-steady-state, stopped-flow kinetics approach that allows for the direct measurement of the monooxygenation rates for a series of para-substituted monophenols by oxy-tyrosinase. The obtained biphasic Hammett plot and the associated solvent kinetic isotope effect values provide direct evidence for an initial H-transfer from the protonated phenolic substrate to the Cu2O2 core of oxy-tyrosinase. The correlation of these experimental results to quantum mechanics/molecular mechanics calculations provides a detailed mechanistic description of this H-transfer step. These new mechanistic insights revise and expand our fundamental understanding of Cu2O2 active sites in biology.

Elucidation of the tyrosinase/O2/monophenol ternary intermediate that dictates the monooxygenation mechanism in melanin biosynthesis.

Melanins are highly conjugated biopolymer pigments that provide photoprotection in a wide array of organisms, from bacteria to humans. The rate-limiting step in melanin biosynthesis, which is the ortho-hydroxylation of the amino acid L-tyrosine to L-DOPA, is catalyzed by the ubiquitous enzyme tyrosinase (Ty). Ty contains a coupled binuclear copper active site that binds O2 to form a µ:η2:η2-peroxide dicopper(II) intermediate (oxy-Ty), capable of performing the regioselective monooxygenation of para-substituted monophenols to catechols. The mechanism of this critical monooxygenation reaction remains poorly understood despite extensive efforts. In this study, we have employed a combination of spectroscopic, kinetic, and computational methods to trap and characterize the elusive catalytic ternary intermediate (Ty/O2/monophenol) under single-turnover conditions and obtain molecular-level mechanistic insights into its monooxygenation reactivity. Our experimental results, coupled with quantum-mechanics/molecular-mechanics calculations, reveal that the monophenol substrate docks in the active-site pocket of oxy-Ty fully protonated, without coordination to a copper or cleavage of the µ:η2:η2-peroxide O-O bond. Formation of this ternary intermediate involves the displacement of active-site water molecules by the substrate and replacement of their H bonds to the µ:η2:η2-peroxide by a single H bond from the substrate hydroxyl group. This H-bonding interaction in the ternary intermediate enables the unprecedented monooxygenation mechanism, where the µ-η2:η2-peroxide O-O bond is cleaved to accept the phenolic proton, followed by substrate phenolate coordination to a copper site concomitant with its aromatic ortho-hydroxylation by the nonprotonated µ-oxo. This study provides insights into O2 activation and reactivity by coupled binuclear copper active sites with fundamental implications in biocatalysis.

Peroxo and Superoxo Moieties Bound to Copper Ion: Electron-Transfer Equilibrium with a Small Reorganization Energy.

Oxygenation of [Cu2(UN-O(-))(DMF)](2+) (1), a structurally characterized dicopper Robin-Day class I mixed-valent Cu(II)Cu(I) complex, with UN-O(-) as a binucleating ligand and where dimethylformamide (DMF) binds to the Cu(II) ion, leads to a superoxo-dicopper(II) species [Cu(II)2(UN-O(-))(O2(•-))](2+) (2). The formation kinetics provide that kon = 9 × 10(-2) M(-1) s(-1) (-80 °C), ΔH(‡) = 31.1 kJ mol(-1) and ΔS(‡) = -99.4 J K(-1) mol(-1) (from -60 to -90 °C data). Complex 2 can be reversibly reduced to the peroxide species [Cu(II)2(UN-O(-))(O2(2-))](+) (3), using varying outer-sphere ferrocene or ferrocenium redox reagents. A Nernstian analysis could be performed by utilizing a monodiphenylamine substituted ferrocenium salt to oxidize 3, leading to an equilibrium mixture with Ket = 5.3 (-80 °C); a standard reduction potential for the superoxo-peroxo pair is calculated to be E° = +130 mV vs SCE. A literature survey shows that this value falls into the range of biologically relevant redox reagents, e.g., cytochrome c and an organic solvent solubilized ascorbate anion. Using mixed-isotope resonance Raman (rRaman) spectroscopic characterization, accompanied by DFT calculations, it is shown that the superoxo complex consists of a mixture of µ-1,2- (2(1,2)) and µ-1,1- (2(1,1)) isomers, which are in rapid equilibrium. The electron transfer process involves only the µ-1,2-superoxo complex [Cu(II)2(UN-O(-))(µ-1,2-O2(•-))](2+) (2(1,2)) and µ-1,2-peroxo structures [Cu(II)2(UN-O(-))(O2(2-))](+) (3) having a small bond reorganization energy of 0.4 eV (λin). A stopped-flow kinetic study results reveal an outer-sphere electron transfer process with a total reorganization energy (λ) of 1.1 eV between 2(1,2) and 3 calculated in the context of Marcus theory.

Amine oxidative N-dealkylation via cupric hydroperoxide Cu-OOH homolytic cleavage followed by site-specific fenton chemistry.

Copper(II) hydroperoxide species are significant intermediates in processes such as fuel cells and (bio)chemical oxidations, all involving stepwise reduction of molecular oxygen. We previously reported a Cu(II)-OOH species that performs oxidative N-dealkylation on a dibenzylamino group that is appended to the 6-position of a pyridyl donor of a tripodal tetradentate ligand. To obtain insights into the mechanism of this process, reaction kinetics and products were determined employing ligand substrates with various para-substituent dibenzyl pairs (-H,-H; -H,-Cl; -H,-OMe, and -Cl,-OMe), or with partially or fully deuterated dibenzyl N-(CH2Ph)2 moieties. A series of ligand-copper(II) bis-perchlorate complexes were synthesized, characterized, and the X-ray structures of the -H,-OMe analogue were determined. The corresponding metastable Cu(II)-OOH species were generated by addition of H2O2/base in acetone at -90 °C. These convert (t1/2 ≈ 53 s) to oxidatively N-dealkylated products, producing para-substituted benzaldehydes. Based on the experimental observations and supporting DFT calculations, a reaction mechanism involving dibenzylamine H-atom abstraction or electron-transfer oxidation by the Cu(II)-OOH entity could be ruled out. It is concluded that the chemistry proceeds by rate limiting Cu-O homolytic cleavage of the Cu(II)-(OOH) species, followed by site-specific copper Fenton chemistry. As a process of broad interest in copper as well as iron oxidative (bio)chemistries, a detailed computational analysis was performed, indicating that a Cu(I)OOH species undergoes O-O homolytic cleavage to yield a hydroxyl radical and Cu(II)OH rather than heterolytic cleavage to yield water and a Cu(II)-O(•-) species.

A N3S(thioether)-ligated Cu(II)-superoxo with enhanced reactivity.

Previous efforts to synthesize a cupric superoxide complex possessing a thioether donor have resulted in the formation of an end-on trans-peroxo-dicopper(II) species, [{(Ligand)Cu(II)}2(µ-1,2-O2(2-))](2+). Redesign/modification of previous N3S tetradentate ligands has now allowed for the stabilization of the monomeric, superoxide product possessing a S(thioether) ligation, [((DMA)N3S)Cu(II)(O2(•-))](+) (2(S)), as characterized by UV-vis and resonance Raman spectroscopies. This complex mimics the putative Cu(II)(O2(•-)) active species of the copper monooxygenase PHM and exhibits enhanced reactivity toward both O-H and C-H substrates in comparison to close analogues [(L)Cu(II)(O2(•-))](+), where L contains only nitrogen donor atoms. Also, comparisons of [(L)Cu(II/I)](n+) compound reduction potentials (L = various N4 vs (DMA)N3S ligands) provide evidence that (DMA)N3S is a weaker donor to copper ion than is found for any N4 ligand-complex.

Tuning of the copper-thioether bond in tetradentate N3S(thioether) ligands; O-O bond reductive cleavage via a [Cu(II)2(µ-1,2-peroxo)]²âº/[Cu(III)2(µ-oxo)2]²âº equilibrium.

Current interest in copper/dioxygen reactivity includes the influence of thioether sulfur ligation, as it concerns the formation, structures, and properties of derived copper-dioxygen complexes. Here, we report on the chemistry of {L-Cu(I)}2-(O2) species L = (DMM)ESE, (DMM)ESP, and (DMM)ESDP, which are N3S(thioether)-based ligands varied in the nature of a substituent on the S atom, along with a related N3O(ether) (EOE) ligand. Cu(I) and Cu(II) complexes have been synthesized and crystallographically characterized. Copper(I) complexes are dimeric in the solid state, [{L-Cu(I)}2](B(C6F5)4)2, however are shown by diffusion-ordered NMR spectroscopy to be mononuclear in solution. Copper(II) complexes with a general formulation [L-Cu(II)(X)](n+) {X = ClO4(-), n = 1, or X = H2O, n = 2} exhibit distorted square pyramidal coordination geometries and progressively weaker axial thioether ligation across the series. Oxygenation (-130 °C) of {((DMM)ESE)Cu(I)}(+) results in the formation of a trans-µ-1,2-peroxodicopper(II) species [{((DMM)ESE)Cu(II)}2(µ-1,2-O2(2-))](2+) (1(P)). Weakening the Cu-S bond via a change to the thioether donor found in (DMM)ESP leads to the initial formation of [{((DMM)ESP)Cu(II)}2(µ-1,2-O2(2-))](2+) (2(P)) that subsequently isomerizes to a bis-µ-oxodicopper(III) complex, [{((DMM)ESP)Cu(III)}2(µ-O(2-))2](2+) (2(O)), with 2(P) and 2(O) in equilibrium (K(eq) = [2(O)]/[2(P)] = 2.6 at -130 °C). Formulations for these Cu/O2 adducts were confirmed by resonance Raman (rR) spectroscopy. This solution mixture is sensitive to the addition of methylsulfonate, which shifts the equilibrium toward the bis-µ-oxo isomer. Further weakening of the Cu-S bond in (DMM)ESDP or substitution with an ether donor in (DMM)EOE leads to only a bis-µ-oxo species (3(O) and 4(O), respectively). Reactivity studies indicate that the bis-µ-oxodicopper(III) species (2(O), 3(O)) and not the trans-peroxo isomers (1(P) and 2(P)) are responsible for the observed ligand sulfoxidation. Our findings concerning the existence of the 2(P)/2(O) equilibrium contrast with previously established ligand-Cu(I)/O2 reactivity and possible implications are discussed.

Observation of a Cu(II)(2) (µ-1,2-peroxo)/Cu(III)(2) (µ-oxo)(2) equilibrium and its implications for copper-dioxygen reactivity.

Synthesis of small-molecule Cu2 O2 adducts has provided insight into the related biological systems and their reactivity patterns including the interconversion of the Cu(II) 2 (µ-η(2) :η(2) -peroxo) and Cu(III) 2 (µ-oxo)2 isomers. In this study, absorption spectroscopy, kinetics, and resonance Raman data show that the oxygenated product of [(BQPA)Cu(I) ](+) initially yields an "end-on peroxo" species, that subsequently converts to the thermodynamically more stable "bis-µ-oxo" isomer (Keq =3.2 at -90 °C). Calibration of density functional theory calculations to these experimental data suggest that the electrophilic reactivity previously ascribed to end-on peroxo species is in fact a result of an accessible bis-µ-oxo isomer, an electrophilic Cu2 O2 isomer in contrast to the nucleophilic reactivity of binuclear Cu(II) end-on peroxo species. This study is the first report of the interconversion of an end-on peroxo to bis-µ-oxo species in transition metal-dioxygen chemistry.

Correlation of the electronic and geometric structures in mononuclear copper(II) superoxide complexes.

The geometry of mononuclear copper(II) superoxide complexes has been shown to determine their ground state where side-on bonding leads to a singlet ground state and end-on complexes have triplet ground states. In an apparent contrast to this trend, the recently synthesized (HIPT3tren)Cu(II)O2(•-) (1) was proposed to have an end-on geometry and a singlet ground state. However, reexamination of 1 with resonance Raman, magnetic circular dichroism, and (2)H NMR spectroscopies indicate that 1 is, in fact, an end-on superoxide species with a triplet ground state that results from the single Cu(II)O2(•-) bonding interaction being weaker than the spin-pairing energy.

Stepwise protonation and electron-transfer reduction of a primary copper-dioxygen adduct.

The protonation­reduction of a dioxygen adduct with [LCu(I)][B(C6F5)4], cupric superoxo complex [LCu(II)(O2(•­))]+ (1) (L = TMG3tren (1,1,1-tris[2-[N(2)-(1,1,3,3-tetramethylguanidino)]ethyl]amine)) has been investigated. Trifluoroacetic acid (HOAcF) reversibly associates with the superoxo ligand in ([LCu(II)(O2(•­))]+) in a 1:1 adduct [LCu(II)(O2(•­))(HOAcF)](+) (2), as characterized by UV­visible, resonance Raman (rR), nuclear magnetic resonance (NMR), and X-ray absorption (XAS) spectroscopies, along with density functional theory (DFT) calculations. Chemical studies reveal that for the binding of HOAcF with 1 to give 2, Keq = 1.2 × 10(5) M(­1) (−130 °C) and ΔH° = −6.9(7) kcal/mol, ΔS° = −26(4) cal mol(­1) K(­1)). Vibrational (rR) data reveal a significant increase (29 cm(­1)) in vO­O (= 1149 cm(­1)) compared to that known for [LCu(II)(O2(•­))](+) (1). Along with results obtained from XAS and DFT calculations, hydrogen bonding of HOAcF to a superoxo O-atom in 2 is established. Results from NMR spectroscopy of 2 at −120 °C in 2-methyltetrahydrofuran are also consistent with 1/HOAcF = 1:1 formulation of 2 and with this complex possessing a triplet (S = 1) ground state electronic configuration, as previously determined for 1. The pre-equilibrium acid association to 1 is followed by outer-sphere electron-transfer reduction of 2 by decamethylferrocene (Me10Fc) or octamethylferrocene (Me8Fc), leading to the products H2O2, the corresponding ferrocenium salt, and [LCu(II)(OAcF)](+). Second-order rate constants for electron transfer (ket) were determined to be 1365 M(­1) s(­1) (Me10Fc) and 225 M(­1) s(­1) (Me8Fc) at −80 °C. The (bio)chemical relevance of the proton-triggered reduction of the metal-bound dioxygen-derived fragment is discussed.

Structure/function correlations among coupled binuclear copper proteins through spectroscopic and reactivity studies of NspF.

The terminal step of 4-hydroxy-3-nitrosobenzamide biosynthesis in Streptomyces murayamaensis is performed by NspF, a mono-oxygenase that converts o-aminophenols to the corresponding nitroso product (hydroxyanilinase activity). Previous biochemical characterization of the resting form of NspF suggested that this enzyme belonged to the coupled binuclear copper enzyme (CBC) family. Another member of this enzyme family, tyrosinase, is able to mono-oxygenate monophenols (monophenolase activity) but not o-aminophenols. To gain insight into the unique reactivity of NspF, we have generated and characterized the oxy form of its active site. The observation of spectral features identical to those of oxy-tyrosinase indicates that oxy-NspF contains a Cu(2)O(2) core where peroxide is coordinated in a µ-η(2):η(2) mode, confirming that NspF is a CBC enzyme. This oxy form is found to react with monophenols, indicating that, like tyrosinase, NspF also possesses monophenolase activity. A comparison of the two electrophilic mechanisms for the monophenolase and hydroxyanilinase activity indicates a large geometric change between their respective transition states. The potential for specific interactions between the protein pocket and the substrate in each transition state is discussed within the context of the differential reactivity of this family of enzymes with equivalent µ-η(2):η(2) peroxy bridged coupled binuclear copper active sites.

Copper dioxygen (bio)inorganic chemistry.

Cu/O2 intermediates in biological, homogeneous, and heterogeneous catalysts exhibit unique spectral features that reflect novel geometric and electronic structures that make significant contributions to reactivity. This review considers how the respective intermediate electronic structures overcome the spin-forbidden nature of O2 binding, activate O2 for electrophilic aromatic attack and H-atom abstraction, catalyze the 4 e- reduction of O2 to H2O, and discusses the role of exchange coupling between Cu ions in determining reactivity.

Fraction of organic carbon predicts labile desorption rates of chlorinated organic pollutants in laboratory-spiked geosorbents.

The resuspension of large volumes of sediments that are contaminated with chlorinated pollutants continues to threaten environmental quality and human health. Whereas kinetic models are more accurate for estimating the environmental impact of these events, their widespread use is substantially hampered by the need for costly, time-consuming, site-specific kinetics experiments. The present study investigated the development of a predictive model for desorption rates from easily measurable sorbent and pollutant properties by examining the relationship between the fraction of organic carbon (fOC) and labile release rates. Duplicate desorption measurements were performed on 46 unique combinations of pollutants and sorbents with fOC values ranging from 0.001 to 0.150. Labile desorption rate constants indicate that release rates predominantly depend upon the fOC in the geosorbent. Previous theoretical models, such as the macro-mesopore and organic matter (MOM) diffusion model, have predicted such a relationship but could not accurately predict the experimental rate constants collected in the present study. An empirical model was successfully developed to correlate the labile desorption rate constant (krap) to the fraction of organic material where log(krap)=0.291-0.785 . log(fOC). These results provide the first experimental evidence that kinetic pollution releases during resuspension events are governed by the fOC content in natural geosorbents.