Active feedback stabilization of super-efficient microcombs in photonic molecules.

Dissipative Kerr soliton (DKS) frequency combs, when generated within coupled cavities, exhibit exceptional performance concerning controlled initiation and power conversion efficiency. Nevertheless, to fully exploit these enhanced capabilities, it is necessary to maintain the frequency comb in a low-noise state over an extended duration. In this study, we demonstrate the control and stabilization of super-efficient microcombs in a photonic molecule. Our findings demonstrate that there is a direct relation between effective detuning and soliton power, allowing the latter to be used as a setpoint in a feedback control loop. Employing this method, we achieve the stabilization of a highly efficient microcomb indefinitely, paving the way for its practical deployment in optical communications and dual-comb spectroscopy applications.

Surpassing the nonlinear conversion efficiency of soliton microcombs.

Laser frequency combs are enabling some of the most exciting scientific endeavours in the twenty-first century, ranging from the development of optical clocks to the calibration of the astronomical spectrographs used for discovering Earth-like exoplanets. Dissipative Kerr solitons generated in microresonators currently offer the prospect of attaining frequency combs in miniaturized systems by capitalizing on advances in photonic integration. Most of the applications based on soliton microcombs rely on tuning a continuous-wave laser into a longitudinal mode of a microresonator engineered to display anomalous dispersion. In this configuration, however, nonlinear physics precludes one from attaining dissipative Kerr solitons with high power conversion efficiency, with typical comb powers amounting to ~1% of the available laser power. Here we demonstrate that this fundamental limitation can be overcome by inducing a controllable frequency shift to a selected cavity resonance. Experimentally, we realize this shift using two linearly coupled anomalous-dispersion microresonators, resulting in a coherent dissipative Kerr soliton with a conversion efficiency exceeding 50% and excellent line spacing stability. We describe the soliton dynamics in this configuration and find vastly modified characteristics. By optimizing the microcomb power available on-chip, these results facilitate the practical implementation of a scalable integrated photonic architecture for energy-efficient applications.

Multilayer integration in silicon nitride: decoupling linear and nonlinear functionalities for ultralow loss photonic integrated systems.

Silicon nitride is an excellent material platform for its extremely low loss in a large wavelength range, which makes it ideal for the linear processing of optical signals on a chip. Moreover, the Kerr nonlinearity and the lack of two-photon absorption in the near infrared enable efficient nonlinear optics, e.g., frequency comb generation. However, linear and nonlinear operations require distinct engineering of the waveguide core geometry, resulting in a tradeoff between optical loss and single-mode behavior, which hinders the development of high-performance, ultralow-loss linear processing blocks on a single layer. Here, we demonstrate a dual-layer photonic integration approach with two silicon-nitride platforms exhibiting ultralow optical losses, i.e., a few dB/m, and individually optimized to perform either nonlinear or linear processing tasks. We demonstrate the functionality of this approach by integrating a power-efficient microcomb with an arrayed waveguide grating demultiplexer to filter a few frequency comb lines in the same monolithically integrated chip. This approach can significantly improve the integration of linear and nonlinear optical elements on a chip and opens the way to the development of fully integrated processing of Kerr nonlinear sources.

Compact lithium niobate microring resonators in the ultrahigh Q/V regime.

Lithium niobate (LN) is a promising material for future complex photonic-electronic circuits, with wide applications in such fields as communications, sensing, quantum optics, and computation. LN took a great stride toward compact photonic integrated circuits (PICs) with the development of partially etched LN on insulator (LNOI) waveguides. However, integration density is still limited for future highly compact PICs, owing to the partial etching nature of their waveguides. Here, we demonstrate a fully etched LN PIC platform, which, for the first time to our knowledge, simultaneously achieves ultralow propagation loss and compact circuit size. The tightly confined fully etched LN waveguides with smooth sidewalls allow us to bring the bending radius down to 20 µm (corresponding to 1 THz free spectral range). We have achieved compact high Q microring resonators with Q/V of 8.7 × 104 µm-3, almost one order of magnitude larger than previous demonstrations. The statistical mean propagation losses of our LN waveguides is 8.5 dB/m (corresponding to a mean Q factor of 4.9 × 106), even with a small bending radius of 40 µm. Our compact and ultralow-loss LN platform shows great potential in future miniaturized multifunctional integration systems. As complementary evidence to show the utility of our platform, we demonstrate soliton microcombs with an ultrahigh repetition rate of 500 GHz in LN.

Hyperparametric Oscillation via Bound States in the Continuum.

Optical hyperparametric oscillation based on the third-order nonlinearity is one of the most significant mechanisms to generate coherent electromagnetic radiation and produce quantum states of light. Advances in dispersion-engineered high-Q microresonators allow for generating signal waves far from the pump and decrease the oscillation power threshold to submilliwatt levels. However, the pump-to-signal conversion efficiency and absolute signal power are low, fundamentally limited by parasitic mode competition and attainable cavity intrinsic Q to coupling Q ratio, i.e., Q_{i}/Q_{c}. Here, we use Friedrich-Wintgen bound states in the continuum (BICs) to overcome the physical challenges in an integrated microresonator-waveguide system. As a result, on-chip coherent hyperparametric oscillation is generated in BICs with unprecedented conversion efficiency and absolute signal power. This work not only opens a path to generate high-power and efficient continuous-wave electromagnetic radiation in Kerr nonlinear media but also enhances the understanding of a microresonator-waveguide system-an elementary unit of modern photonics.

Optical linewidth of soliton microcombs.

Soliton microcombs provide a versatile platform for realizing fundamental studies and technological applications. To be utilized as frequency rulers for precision metrology, soliton microcombs must display broadband phase coherence, a parameter characterized by the optical phase or frequency noise of the comb lines and their corresponding optical linewidths. Here, we analyse the optical phase-noise dynamics in soliton microcombs generated in silicon nitride high-Q microresonators and show that, because of the Raman self-frequency shift or dispersive-wave recoil, the Lorentzian linewidth of some of the comb lines can, surprisingly, be narrower than that of the pump laser. This work elucidates information about the physical limits in phase coherence of soliton microcombs and illustrates a new strategy for the generation of spectrally coherent light on chip.

Si3N4 photonic integration platform at 1 µm for optical interconnects.

Vertical-cavity surface-emitting lasers (VCSELs) are the predominant technology for high-speed short-range interconnects in data centers. Most short-range interconnects rely on GaAs-based multi-mode VCSELs and multi-mode fiber links operating at 850 nm. Recently, GaAs-based high-speed single-mode VCSELs at wavelengths > 1 µm have been demonstrated, which increases the interconnect reach using a single-mode fiber while maintaining low energy dissipation. If a suitable platform for passive wavelength- and space-multiplexing were developed in this wavelength range, this single-mode technology could deliver the multi-Tb/s interconnect capacity that will be required in future data centers. In this work, we show the first passive Si3N4 platform in the 1-µm band (1030-1075 nm) with an equivalent loss < 0.3 dB/cm, which is compatible with the system requirements of high-capacity interconnects. The waveguide structure is optimized to achieve simultaneously single-mode operation and low bending radius, and we demonstrate a wide range of high-performance building blocks, including arrayed waveguide gratings, Mach-Zehnder interferometers, splitters and low-loss fiber interfaces. This technology could be instrumental in scaling up the capacity and reducing the footprint of VCSEL-based optical interconnects and, thanks to the broad transparency in the near-infrared and compatibility with the Yb fiber amplifier window, enabling new applications in other domains as optical microscopy and nonlinear optics.

A compact diffractive sorter for high-resolution demultiplexing of orbital angular momentum beams.

The design and fabrication of a compact diffractive optical element is presented for the sorting of beams carrying orbital angular momentum (OAM) of light. The sorter combines a conformal mapping transformation with an optical fan-out, performing demultiplexing with unprecedented levels of miniaturization and OAM resolution. Moreover, an innovative configuration is proposed which simplifies alignment procedures and further improves the compactness of the optical device. Samples have been fabricated in the form of phase-only diffractive optics with high-resolution electron-beam lithography (EBL) over a glass substrate. A soft-lithography process has been optimized for fast and cheap replica production of the EBL masters. Optical tests with OAM beams confirm the designed performance, showing excellent efficiency and low cross-talk, with high fidelity even with multiplexed input beams. This work paves the way for practical OAM multiplexing and demultiplexing devices for use in classical and quantum communication.