An Intraoperative Method to Minimize Leg Length Discrepancy in Anterior Minimally Invasive Total Hip Arthroplasty-A Prospective Study.

While several intraoperative devices have been described in the literature for assessing leg length discrepancy (LLD), none have been utilized during total hip arthroplasty (THA) performed via the Anterior Minimally Invasive Surgery (AMIS) approach. The aim of this prospective study was to evaluate the efficacy and accuracy of a compass device in assessing leg length during THA performed using the AMIS technique. A prospective study was conducted involving 35 patients who consecutively underwent unilateral primary THA using the AMIS technique at our department from September 2017 to December 2018. LLD was measured by comparing preoperative and postoperative anteroposterior radiographs of the pelvis, independently assessed by two observers. The mean preoperative LLD was 3.6 (SD 3.9, range, 0.2-19.3) mm. The mean postoperative LLD was 2.5 (SD 3.0, range, 0-12.2) mm. A postoperative LLD of less than 5 mm was observed in 88.2% of cases, with 94.1% having values less than 10 mm. In conclusion, the compass device emerged as a valuable tool for ensuring precise limb length control in THA with the AMIS approach, offering both efficiency and cost-effectiveness in clinical practice.

Clinical and multi-segment kinematic analysis of a modified Grice arthrodesis to correct type II adult-acquired flat-foot.

BACKGROUND: Adult acquired flat foot (AAFF) is a symptomatic postural alteration of the foot due to modifications in bony structures and/or soft tissues supporting the medial longitudinal arch. For the most severe cases, when orthotic solutions do not provide enough pain relief, surgery may be necessary. RESEARCH QUESTION: Is it possible to restore a normal medial longitudinal arch and to correct the static and dynamic frontal plane alignment of the rearfoot via a modified Grice surgical procedure in AAFF patients? METHODS: Eleven patients with stage II AAFF were recruited in the study and underwent the Grice procedure. Patients were assessed via gait analysis using a validated multi-segment foot protocol. Double-leg standing static posture and foot joint kinematics during barefoot walking were measured before surgery and at a mean follow-up of 15 ± 8 months. Twenty-seven age-matched healthy subjects without foot morphological alterations were used as control. Patients' feet were clinically assessed via the Foot Function Index and the Foot Posture Index. Wilcoxon signed rank test was used to assess differences in kinematic and spatio-temporal parameters between pre-op and follow-up evaluations. 1D statistical parametric mapping was used to assess differences in temporal profiles of foot joint rotations. RESULTS: The clinical indexes significantly improved at post-op (p < 0.05). No differences in sagittal plane static and dynamic joint rotations were observed between pre-op and post-op. In the frontal plane, metatarsus to calcaneus and midfoot to calcaneus rotation angles significantly improved from pre-op to post-op, with the latter resulting consistent with control data. Range of motion and maximum value of the medial longitudinal arch angle were reduced following surgery. SIGNIFICANCE: The modified Grice procedure restored a good frontal-plane alignment of rearfoot and midfoot, and the clinical scores provided evidence of its effectiveness in significantly reducing pain and improving the quality of daily activities.

3D measurement techniques for the hindfoot alignment angle from weight-bearing CT in a clinical population.

Cone-beam CT (CBCT) scans now enable accurate measurements on foot skeletal structures with the advantage of observing these in 3D and in weight-bearing. Among the most common skeletal deformities, the varus/valgus of the hindfoot is the most complex to be represented, and a number of measure proposals have been published. This study aims to analyze and to compare these measurements from CBCT scans in a real clinical population with large such deformity. Ten patients with severe acquired adult flatfoot and indication for surgery underwent CBCT scans (Carestream, USA) while standing on that leg, before and after surgical correction. Corresponding 3D shape of each bone of the distal shank and hindfoot were defined (Materialise, Belgium). Six different techniques from the literature were used to calculate the varus/valgus deformity, i.e. the inclination of the hindfoot in the frontal plane of the shank. Standard clinical measurements by goniometers were taken for comparison. According to these techniques, and starting from a careful 3D reconstruction of the relevant foot skeletal structures, a large spectrum of measurements was found to represent the same hindfoot alignment angle. Most of them were very different from the traditional clinical measures. The assessment of the pre-operative valgus deformity and of the corresponding post-operative correction varied considerably. CBCT finally allows 3D assessment of foot deformities in weight-bearing. Measurements from the different available techniques do not compare well, as they are based on very different approaches. It is recommended to be aware of the anatomical and functional concepts behind these techniques before clinical and surgical conclusions.

Angular and linear measurements of adult flexible flatfoot via weight-bearing CT scans and 3D bone reconstruction tools.

Acquired adult flatfoot is a frequent deformity which implies multiple, complex and combined 3D modifications of the foot skeletal structure. The difficult thorough evaluation of the degree of severity pre-op and the corresponding assessment post-op can now be overcome by cone-beam (CBCT) technology, which can provide access to the 3D skeletal structure in weight-bearing. This study aims to report flatfoot deformities originally in 3D and in weight-bearing, with measurements taken using two different bone segmentation techniques. 21 such patients, with indication for surgical corrections, underwent CBCT (Carestream, US) while standing on one leg. From these scans, 3D models of each bone of the foot were reconstructed by using two different state-of-the-art segmentation tools: a semi-automatic (Mimics Innovation Suite, Materialise, Belgium), and an automatic (Bonelogic Ortho Foot and Ankle, Disior, Finland). From both reconstructed models, Principal Component Analysis was used to define anatomical reference frames, and original foot and ankle angles and other parameters were calculated mostly based on the longitudinal axis of the bones, in anatomical plane projections and in 3D. Both bone model reconstructions revealed a considerable valgus of the calcareous, plantarflexion and internal rotation of the talus, and typical Meary's angles in the lateral and transverse plane projections. The mean difference from these angles between semi-automatic and automatic segmentations was larger than 3.5 degrees for only 3 of the 32 measurements, and a large number of these differences were not statistically significant. CBCT and the present techniques for bone shape reconstruction finally provide a novel and valuable 3D assessment of complex foot deformities in weight-bearing, eliminating previous limitations associated to unloaded feet and bidimensional measures. Corresponding measurements on the bone models from the two segmentation tools compared well. Other more representative measurements can be defined in the future using CBCT and these techniques.

Piezosurgery in Hallux Valgus Correction: Distal Linear Osteotomy Operative Technique Using Piezoelectric Tools.

Purpose Piezoelectric and ultrasonic vibrations have been used to cut tissues for three decades, in particular, in periodontics. The increasing use of piezosurgery is based on its clinical advantages such as selective cutting, precision, and low-temperature work rates. The authors applied this concept to a new operative field, the foot and ankle pathology and surgery, such as hallux valgus corrective distal linear osteotomy. Methods The osteotome equipped was the Surgysonic Moto-II model (Esacrom, Imola, Italy), a system recently developed for cutting bone withmicrovibrations. Tips used in author's case series were a high-efficiency five teeth piezoelectric saw and a high-efficiency flat scalpel shaped on three edges. Operative technique is described. Discussion and Conclusion Piezoelectric techniques were developed in response to the need for great precision and safety in bone surgery that was availavle with other manual and rmotorised instruments. Piezo-technology allows minimally-invasive and percutaneous surgery, with reduced trauma on periostium, bone, and soft tissues, reduced healing time of the osteotomy due to the absence of bony necrosis and debris formation and major precision.

Schwannoma of the foot: report of four cases and literature review.

Schwannoma is a soft tissue tumor that rarely presents in the foot. Patients are usually asymptomatic, but in some cases symptoms typically result from the mass effect and direct involvement of the nerve and surrounding tissue. We report on four consecutive cases. The first patient was a 57-years-old female that referred symptoms similar to the Morton's neuroma with a mass arising from the medial plantar nerve. The second patient was treated for a schwannoma in the plantar area. The third case was a female with a schwannoma arising from the sural nerve and the fourth patient had a tumor arising from the medial plantar nerve. All patients underwent surgical excision and histological evaluation. No signs of neurological deficit or recurrence were observed at final follow-up. Purpose of the study was to define clinical features, optimal management and outcome of schwannomas of the foot, through an accurate review of the literature.

Posterior tibial tendon displacement behind the tibia and its interposition in an irreducible isolated ankle dislocation: a case report and literature review.

Isolated posteromedial ankle dislocation is a rare condition thanks to the highly congruent anatomical configuration of the ankle mortise, in which the medial and lateral malleoli greatly reduce the rotational movement of the talus, and the strength of the ligaments higher than the malleoli affords protection against fractures. However, other factors, like medial malleolus hypoplasia, laxity of the ligaments, peroneal muscle weakness and previous ankle sprains, could predispose to pure dislocation. In the absence of such factors, only a complex high-energy trauma, with a rotational component, can lead to this event. Irreducibility of an ankle dislocation, which is rarely encountered, can be due to soft tissue interposition. Dislocation of the posterior tibial tendon can be the cause of an irreducible talar dislocation; interposition of this tendon, found to have slid posteriorly to the distal tibia and then passed through the tibioperoneal syndesmosis, is reported in just a few cases of ankle fracture-dislocation.

Common peroneal nerve palsy due to hematoma at the fibular neck.

Common peroneal nerve palsy is an infrequent pathology mostly related to endogenous or exogenous compression. The exogenous compression is frequently related to trauma: knee fractures or hematoma arisen after a direct blow. Fractures may cause a direct lesion of the nerve; hematoma causes a compression of the nerve at the fibular neck causing pain and functional loss. Lesions of the common peroneal nerve can also be related to total knee arthroplasty. The clinical evaluation is characterized by muscle weakness with or without sensory abnormality. The etiopathogeneses of the compression have to be confirmed by ultrasound or magnetic resonance imaging before the surgical treatment. The purpose of this article is to describe a case of common peroneal nerve palsy due to a posttraumatic hematoma after a sport-related injury. We evaluated this case with dynamic ultrasound with good visualization of the morphology of the lesion and of the compression.

The distal tibiofibular syndesmosis during passive foot flexion. RSA-based study on intact, ligament injured and screw fixed cadaver specimens.

INTRODUCTION: The aim of the study was to investigate the kinematics of the distal tibiofibular syndesmosis in intact and ligament injured ankles and to assess how effective is the syndesmotic screw in restraining mortise width variations during passive foot flexion. MATERIALS AND METHODS: The trials were carried out on seven fresh frozen cadaver specimens. The distal tibiofibular syndesmosis widening was investigated using Roentgen stereophotogrammetric analysis, in intact and ligament injured ankles and after the fixation of the syndesmotic screw. The AO-ASIF recommendations were followed for screw implant. RESULTS: Injury to the syndesmotic and deltoid ligaments of the ankle did not result in a significant variation of the syndesmosis behavior during passive foot flexion. The 4.5-mm diameter cortical screw used in this study proved effective in restraining mortise width variation during foot flexion. The recorded mortise widening in the flexion arc extending from the neutral to the maximally dorsiflexed position was negligible in intact and ligament injured joints. CONCLUSION: The result does not endorse the recommendation of placing the foot in full dorsal flexion during screw implantation. The choice of screw fixation as a treatment for ankle syndesmosis disruption should be carefully evaluated.

Long-term results with cementless Fitek (or Fitmore) cups.

Fitek cementless cups have been adopted in our department in 1989. The first 100 consecutive Fitek implants were analyzed clinically (Harris hip score) and radiographically (anteroposterior and lateral x-rays) with a mean follow-up of 9.7 years. We did not have any case of cup loosening or any other problem requiring cup revision. In this series, we had 86 excellent, 10 good, 2 fair, and 2 poor results. The 2 poor results were because of 2 cases of aseptic loosening of the stem (1 cemented and 1 cementless). The x-rays showed an average angle of cup inclination of 36.5 degrees (range 16 degrees -54 degrees ) after surgery and no variations at the last follow-up. Bidimensional linear wear of the acetabular component showed 6 cases of measurable wear with an average wear rate per year of 0.265 mm. The overall wear rate per year was 0.02 mm. At the time of the last follow-up examination, we had 3 femoral osteolysis and no case of acetabular osteolysis. In our series, we observed "lack of contact" zones above the polar depression in 71 cases immediately after surgery. The average thickness of these lines was 1 (range 0.5-3.5) mm. Of these, at the last follow-up, 61 cases (86%) showed a complete "filling" of the "lack of contact," whereas in 10 (24%), the "filling" was incomplete (4 cases still showing a radiolucent line [