RESUMO
This work introduces a new element-selective gas chromatography detector for the accurate quantification of traces of volatile oxygen-containing compounds in complex samples without the need for specific standards. The key to this approach is the use of oxygen highly enriched in 18O as the oxidizing gas in a combustion unit (800 °C) that allows us to directly and unambiguously detect the natural oxygen present in the GC-separated compounds through its incorporation into the volatile species formed after their combustion and their subsequent degradation to 16O in the ion source. The unspecific signal due to the low 16O abundance in the oxidizing gas could be compensated by measuring the m/z 12 that comes as well from the CO2 degradation. Equimolarity was proved with several O-containing compounds with different sizes and functionalities. A detection limit of 28 pg of injected O was achieved, which is the lowest ever reported for any GC detector, which barely worsened to 55 and 214 pg of O when the oxygenate partially or completely coeluted with a very abundant matrix compound. Validation was attained by the analysis of a SRM to obtain accurate (99-103%) and precise (1-4% RSD) results. Robustness was tested after spiking a hydrotreated diesel with 10 O-compounds at the ppm level, which could be discriminated from the matrix crowd and quantified (mean recovery of 102 ± 9%) with a single generic standard. Finally, it was also successfully applied to easily spot and quantify the 33 oxygenates naturally present in a complex wood bio-oil sample.
RESUMO
Modern research faces increasingly complex materials with a constant need for new analytical strategies that can provide deeper levels of chemical insight. Ultrahigh resolution mass spectrometry (MS), particularly Fourier transform ion cyclotron resonance (FTICR) MS, has provided a robust analytical foundation. However, MS alone offers limited structural information. Here, we present the first implementation and results from an FTICR MS with fully integrated dual accumulation analysis with gated trapped ion mobility spectrometry (gTIMS) capability. The drastically extended charge capacity and parallel accumulation facilitate the analysis of complex mixtures. We achieved a high dynamic range of 4 orders of magnitude within a single FTICR acquisition event. Simultaneously, the valuable linear relationship between the TIMS elution voltage and reduced mobility was retained over a wide mobility range. Benchmarking the instrument performance with Suwannee River fulvic acid (SRFA) by variable ramp gTIMS analysis allowed separation and unambiguous assignment of different charge state distributions. Application to bio-oils has proven the capability to distinguish the isomeric diversity in these ultracomplex samples, while maintaining the expected FTICR MS resolving power and mass accuracy. Valuable information about the molecular distribution, isomeric diversity, and main molecular differences could directly be extracted within the analysis time of a classical "dilute and shoot" direct infusion experiment. The development of this fully integrated and flexible gTIMS with FTICR MS analysis possesses the potential to significantly change the current landscape of high-resolution mass spectrometric analysis of complex mixtures through the added insight of isomeric complexity afforded by TIMS. The exploration of the added IMS dimension promises transformative effects across diverse fields including energy transition, environmental studies, and biological research.
RESUMO
Pyrolysis is a promising way to convert plastic waste into valuable resources. However, for downstream upgrading processes, many undesirable species, such as conjugated diolefins or heteroatom-containing compounds, can be generated during this pyrolysis. In-depth chemical characterization is therefore required to improve conversion and valorization. Because of the high molecular diversity found in these samples, advanced analytical instrumentation is needed to provide accurate and complete characterization. Generally, direct infusion Fourier transform mass spectrometry is used to gather information at the molecular level, but it has the disadvantage of limited structural insights. To overcome this drawback, gas chromatography has been coupled to Fourier transform ion cyclotron resonance mass spectrometry. By taking advantage of soft atmospheric pressure photoionization, which preserves molecular information, and the use of different dopants (pyrrole, toluene, and benzene), selective ionization of different chemical families was achieved. Differences in the ionization energy of the dopants will only allow the ionization of the molecules of the pyrolysis oil which have lower ionization energy, or which are accessible via specific chemical ionization pathways. With a selective focus on hydrocarbon species and especially hydrocarbon species having a double bond equivalent (DBE) value of 2, pyrrole is prone to better ionize low-mass molecules with lower retention times compared to the dopant benzene, which allowed better ionization of high-mass molecules with higher retention times. The toluene dopant presented the advantage of ionizing both low and high mass molecules.
RESUMO
In recent years, various alternatives to fossil fuels have been developed. One of them involves the production of bio-oils from lignocellulosic-based biomass through pyrolysis. However, bio-oils present numerous heteroatoms and, in particular, oxygen atoms that need to be removed by an upgrading process. To optimize these processes, it is necessary to have good knowledge of the composition of the bio-oils at the molecular level. This work aims to establish the usefulness of laser desorption ionization (LDI) and matrix-assisted laser desorption/ionization (MALDI) techniques on lignocellulosic biomass-based bio-oils. Using a Fourier transform ion cyclotron mass spectrometer (FTICR MS), we showed that MALDI gives more information than LDI. The selectivity of a series of MALDI matrices was investigated, showing that some matrices are selective toward compound families and others ionize a wider range of compounds. In this study, nine proton-transfer matrices and three electron-transfer matrices were used and compared to results obtained in LDI. Dithranol, acetosyringone, and graphene oxide were the three promising matrices selected from all matrices, giving an overall characterization of oxygenated classes in a bio-oil. They allowed the ionization of many more species covering a wide range of polarity, aromaticity, and mass with a homogeneous relative intensity for all molecular classes such as lignin-derivative species, sugars, and lipid-derivative species.
Assuntos
Óleos de Plantas , Pirólise , Humanos , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , LasersRESUMO
Here, we show the potential and applicability of the novel GC-combustion-MS approach as a nitrogen-selective GC detector. Operating requirements to achieve reproducible and compound-independent formation of volatile NO species as a selective N-signal during the combustion step are described. Specifically, high temperatures (≥1000 °C) and post-column O2 flows (0.4 mL min-1 of 0.3% O2 in He) turned out to be necessary when using a vertical oven without makeup flow (prototype #1). In contrast, the use of a horizontal oven with 1.7 mL min-1 He as an additional makeup flow (prototype #2) required milder conditions (850 °C and 0.2 mL min-1). A detection limit of 0.02 pg of N injected was achieved, which is by far the lowest ever reported for any GC detector. Equimolarity, linearity, and peak shape were also adequate. Validation of the approach was performed by the analysis of a certified reference material obtaining accurate (2% error) and precise (2% RSD) results. Robustness was tested with the analysis of two complex samples with different matrices (diesel and biomass pyrolysis oil) and N concentration levels. Total N determined after the integration of the whole chromatograms (524 ± 22 and 11,140 ± 330 µg N g-1, respectively) was in good agreement with the reference values (497 ± 10 and 11,000 ± 1200 µg N g-1, respectively). In contrast, GC-NCD results were lower for the diesel sample (394 ± 42 µg N g-1). Quantitative values for the individual and families of N species identified in the real samples by parallel GC-MS and additional GC × GC-MS analyses were also obtained using a single generic internal standard.
RESUMO
Complex molecular mixtures are encountered in almost all research disciplines, such as biomedical 'omics, petroleomics, and environmental sciences. State-of-the-art characterization of sample materials related to these fields, deploying high-end instrumentation, allows for gathering large quantities of molecular composition data. One established technological platform is ultrahigh-resolution mass spectrometry, e.g., Fourier-transform mass spectrometry (FT-MS). However, the huge amounts of data acquired in FT-MS often result in tedious data treatment and visualization. FT-MS analysis of complex matrices can easily lead to single mass spectra with more than 10,000 attributed unique molecular formulas. Sophisticated software solutions to conduct these treatment and visualization attempts from commercial and noncommercial origins exist. However, existing applications have distinct drawbacks, such as focusing on only one type of graphic representation, being unable to handle large data sets, or not being publicly available. In this respect, we developed a software, within the international complex matrices molecular characterization joint lab (IC2MC), named "python tools for complex matrices molecular characterization" (PyC2MC). This piece of software will be open-source and free to use. PyC2MC is written under python 3.9.7 and relies on well-known libraries such as pandas, NumPy, or SciPy. It is provided with a graphical user interface developed under PyQt5. The two options for execution, (1) a user-friendly route with a prepacked executable file or (2) running the main python script through a Python interpreter, ensure a high applicability but also an open characteristic for further development by the community. Both are available on the GitHub platform (https://github.com/iC2MC/PyC2MC_viewer).
RESUMO
According to the annual production of plastics worldwide, in 2020 about 370 million tons of plastic were produced in the world. Chemical recycling, particularly pyrolysis of plastic wastes, could be a valuable solution to resolve these problems and provide an alternative pathway to produce "recycled" chemical products for the petrochemical industry. Nevertheless, the pyrolysis oils need a detailed characterization before the upgrading test to re-use them to generate new recycled products. Multidimensional gas chromatography coupled with both low- and high-resolution time-of-flight mass spectrometers was employed for a detailed investigation among and within different chemical classes present in bio-plastic oil. The presence of several isomeric species as well as homologs series did not allow a reliable molecular identification, except for a few compounds that showed both MS similarity >800/1000 and retention index within ±20. Indeed, the identification of several isomeric species was assessed by high-resolution mass spectrometry equipped with photoionization interface. This soft ionization mode was an additional filter in the identification step allowing unambiguous identification of analytes not identified by the standard electron ionization mode at 70 eV. The injection method was also optimized using a central composite design to successfully introduce a wide range of carbon number compounds without discrimination of low/high boiling points.
Assuntos
Plásticos , Pirólise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Espectrometria de Massas/métodos , Óleos de Plantas/química , Compostos OrgânicosRESUMO
The chemical structure of an organic molecule has a direct influence on its three-dimensional conformation. One way to obtain information on this conformation is to use ion mobility spectrometry. This technique allows the separation of different isomers according to their collision cross section (CCS) with an inert gas. Smaller or more compact molecules will have lower collision cross section values than larger molecules. The CCS is an intrinsic ion parameter for a specific gas and is thus predictable. Today, calculations of rigid molecules are commonly performed to obtain additional structural information on an ion. However, calculations are more complex with very flexible molecules. In particular, molecules presenting long alkyl chains can yield a high number of conformers. Each conformer is then associated with a CCS value that is specific to it. We report, here, a methodology to predict CCS of flexible molecules. The used approach is based on automatic conformers research followed by geometry optimization and CCS calculations. Determination of theoretical and experimental CCS values for a rigid polycyclic aromatic hydrocarbons (PAHs) standard was used to calibrate the Mobcal software. Then, 13 standard molecules ranging from 4 to 19 carbon alkyl chains, including three long alkyl chain isomers of C22H38, were analyzed on a TWIMS-ToF and calculated using our methodology. CCS deviations between experimental and theoretical values were found to be less than 1.5% over the whole studied CCS range. This method was finally applied for structural analysis of petroleum compounds refractory to the hydro-denitrogenation process.
Assuntos
Espectrometria de Mobilidade Iônica , Software , Isomerismo , Espectrometria de Massas/métodosRESUMO
Plastic pyrolysis oil is of particular interest for waste management in the current context of a circular economy. Due to their uncontrolled origin, these oils may contain significant amount of unwanted compounds such as nitrogen-containing species. These compounds are known to be catalyst poisons during refining processes. Therefore, the removal of these species is crucial, and their characterization from structural and quantification points of view is essential for this purpose. This study presents a method to specify and quantify nitrogen-containing classes in a plastic pyrolysis oil by direct infusion mass spectrometry. Two steps were used, namely structural characterization to select suitable standards and semiquantification. The structural speciation of nitrogen-containing compounds was first performed by electrospray ionization Fourier transform mass spectrometry, followed by tandem mass spectrometry using high-resolution mass isolation and infrared multiphoton dissociation fragmentation. A semiquantification is then performed by the standard addition method, which is very appropriate for such complex matrices. Aromatic cores such as quinoline and quinoxaline were evidenced for both N1 and N2 classes, allowing 2-methylquinoxaline and 2-butylquinoline to be proposed as standards for the semiquantification of N2- and N1-containing compounds, respectively. The amount of nitrogen detected from the sum of the individual species was consistent with the bulk analysis. The reported methodology can be applied to numerous other families of compounds in various other complex matrices.
RESUMO
The production of renewable fuels as biodiesel and bio-jet fuel is usually originated by the transformation and processing of oleaginous feedstocks, mainly composed of triacylglycerols. Currently, a significant part of the triacylglycerol production relies on grassy oil crops or other woody oil plants, representing more than 120 million metric tons every year. Considering that the worldwide triacylglycerol demand is expected to rise in the future, alternative routes are necessary to ensure a sustainable biodiesel industry and limit diesel price volatility. In this context, the use of animal fats could be an interesting alternative for biodiesel production as the production of animal byproducts represents nearly 17 million tons per year in the European Union only (2020). Animal fats, however, contain large amounts of no-esterified fatty acids and other oxygen compounds, reducing the yield of biodiesel. Therefore, a specific pretreatment is needed before the trans-esterification process. The setup of such appropriate pretreatments requires detailed upstream characterization of the minor components present in the feedstock. For this purpose, the minor component profile of animal fat was investigated by comprehensive two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry. This was preceded by an innovative sample fractionation and focalization of these minor components by a preparative liquid chromatographic column method. The overall method permitted to extract different levels of information from the two-dimensional chromatograms, leading to a tentative identification of more than 150 compounds, mainly oxygenated, belonging to different chemical classes.
Assuntos
Biocombustíveis , Compostos de Oxigênio , Animais , Biocombustíveis/análise , Cromatografia Gasosa , Cromatografia Líquida , Espectrometria de Massas , OxigênioRESUMO
Because of its speed, sensitivity, and ability to scrutinize individual species, mass spectrometry (MS) has become an essential tool in analytical strategies aimed at studying the degradation behavior of polyesters. MS analyses can be performed prior to the degradation event for structural characterization of initial substrates or after it has occurred to measure the decreasing size of products as a function of time. Here, we show that MS can also be usefully employed during the degradation process by online monitoring the chain solvolysis induced by reactive desorption electrospray ionization (DESI). Cleavage of ester bonds in random copolymers of lactic acid (LA) and glycolic acid (GA) was achieved by electrospraying methanol-containing NaOH onto the substrates. Experimental conditions were optimized to generate methanolysis products of high abundance so that mass spectra can be conveniently processed using Kendrick-based approaches. The same reactive-DESI performance was demonstrated for two sample preparations, solvent casting for soluble samples or pressed pellets for highly crystalline substrates, permitting to compare polymers with LA/GA ratios ranging from 100/0 to 5/95. Analysis of sample fractions collected by size exclusion chromatography showed that methanolysis occurs independently of the original chain size, so data recorded for poly(LA-co-GA) (PLAGA) copolymers with the average molecular weight ranging from 10 to 180 kDa could be safely compared. The average mass of methanolysis products was observed to decrease linearly (R2 = 0.9900) as the GA content increases in PLAGA substrates, consistent with the susceptibility of ester bonds toward solvolysis being higher in GA than in LA. Because DESI only explores the surface of solids, these data do not reflect bulk degradability of the copolymers but, instead, their relative degradability at the molecular level. Based on a "reactive-DESI degradability scale" such as that established here for PLAGA, the proposed method offers interesting perspectives to qualify intrinsic degradability of different polyesters and evaluate their erosion susceptibility or to determine the degradability of those polymers known to degrade via erosion only.
Assuntos
Glicóis , Espectrometria de Massas por Ionização por Electrospray , Peso Molecular , Poliésteres , Copolímero de Ácido Poliláctico e Ácido PoliglicólicoRESUMO
Molecular characterization of compounds present in highly complex mixtures such as petroleum is proving to be one of the main analytical challenges. Heavy fractions, such as asphaltenes, exhibit immense molecular and isomeric complexity. Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) with its unequalled resolving power, mass accuracy and dynamic range can address the isobaric complexity. Nevertheless, isomers remain largely inaccessible. Therefore, another dimension of separation is required. Recently, ion mobility mass spectrometry has revealed great potential for isomer description. In this study, the combination of trapped ion mobility and Fourier transform ion cyclotron resonance mass spectrometry (TIMS-FTICR) is used to obtain information on the structural features and isomeric diversity of vanadium petroporphyrins present in heavy petroleum fractions. The ion mobility spectra provided information on the isomeric diversity of the different classes of porphyrins. The determination of the collision cross section (CCS) from the peak apex allows us to hypothesize about the structural aspects of the petroleum molecules. In addition, the ion mobility signal full width at half maximum (FWHM) was used as a measure for isomeric diversity. Finally, theoretical CCS determinations were conducted first on core structures and then on alkylated petroporphyrins taking advantage of the linear correlation between the CCS and the alkylation level. This allowed the proposal of putative structures in agreement with the experimental results. The authors believe that the presented workflow will be useful for the structural prediction of real unknowns in highly complex mixtures.
RESUMO
The in-depth isomeric and isobaric description of ultra-complex organic mixtures remains one of the most challenging analytical tasks. In the last two decades, ion mobility coupled to high-performance mass spectrometry added an additional structural dimension. Despite tremendous instrumental improvements, commercial devices are still limited in ion mobility and mass spectrometric resolving power and struggle to resolve isobaric species and complex isomeric patterns. To overcome these limitations, we explored the capabilities of cyclic ion mobility high-resolution mass spectrometry with special emphasis on petrochemical applications. We could show that quadrupole-selected ion mobility mass spectrometry gives closer insights into the isomeric distribution. In combination with slicing the specific parts of the ion mobility dimension, isobaric interferences could be drastically removed. Collision-induced dissociation (CID) allowed separating structural groups of polycyclic aromatic hydrocarbons and heterocycles (PAH/PASH), deploying up to 10 passes in the cyclic ion mobility device. Finally, we introduce a data processing workflow to resolve the 3.4 mDa SH4/C3 mass split by combining ion mobility and mass spectrometric resolving power. Cyclic ion mobility with the intelligent design of experiments and processing routines will be a powerful approach addressing the isobaric and isomeric complexity of ultra-complex mixtures.
RESUMO
A wide variety of biomass, from triglycerides to lignocellulosic-based feedstock, are among promising candidates to possibly fulfill requirements as a substitute for crude oils as primary sources of chemical energy feedstock. During the feedstock processing carried out to increase the H:C ratio of the products, heteroatom-containing compounds can promote corrosion, thus limiting and/or deactivating catalytic processes needed to transform the biomass into fuel. The use of advanced gas chromatography techniques, in particular multi-dimensional gas chromatography, both heart-cutting and comprehensive coupled to mass spectrometry, has been widely exploited in the field of petroleomics over the past 30 years and has also been successfully applied to the characterization of volatile and semi-volatile compounds during the processing of biomass feedstock. This review intends to describe advanced gas chromatography-mass spectrometry-based techniques, mainly focusing in the period 2011-early 2020. Particular emphasis has been devoted to the multi-dimensional gas chromatography-mass spectrometry techniques, for the isolation and characterization of the oxygen-containing compounds in biomass feedstock. Within this context, the most recent advances to sample preparation, derivatization, as well as gas chromatography instrumentation, mass spectrometry ionization, identification, and data handling in the biomass industry, are described.
Assuntos
Biocombustíveis/análise , Oxigênio/análise , Biomassa , Cromatografia Gasosa-Espectrometria de MassasRESUMO
Anthropogenic air pollution has a severe impact on climate and human health. The immense molecular complexity and diversity of particulate matter (PM) is a result of primary organic aerosol (POA) as well as secondary organic aerosols (SOAs). In this study, a direct inlet probe (DIP), i.e., atmospheric solids analysis probe (ASAP), with ion mobility high-resolution mass spectrometric detection is applied. Primary particulate matter emissions from three sources were investigated. Furthermore, photochemically aged emissions were analyzed. DIP introduction allowed for a direct analysis with almost no sample preparation and resulted in a complex molecular pattern. This pattern shifted through oxidation processes toward heavier species. For diesel emissions, the fuel's chemical characteristic is partially transferred to the particulate matter by incomplete combustion and characteristic alkylated series were found. Polycyclic aromatic hydrocarbons (PAHs) were identified as major contributors. Ion mobility analysis results in drift time profiles used for structural analysis. The apex position was used to prove structural changes, whereas the full-width-at-half-maximum was used to address the isomeric diversity. With this concept, the dominance of one or a few isomers for certain PAHs could be shown. In contrast, a broad isomeric diversity was found for oxygenated species. For the in-depth specification of fresh and aged spruce emissions, the ion mobility resolving power was almost doubled by allowing for three passes in the circular traveling wave design. The results prove that ASAP coupled with ion mobility spectrometry-mass spectrometry (IMS-MS) serves as a promising analytical approach for tackling the vast molecular complexity of PM.
RESUMO
The rising demand for more and more specialized polyethylene represents a challenge for synthesis and analysis. The desired properties are dependent on the structure, but its elucidation is still intricate. For this purpose, we applied thermal analysis hyphenated to single photon ionization mass spectrometry (STA-SPI-MS). The melting and pyrolysis behavior of different types of polyethylene were tracked by DSC and mass loss. Crystallinity and melting point give hints about the branching but are also influenced by the molecular weight distribution. The evolving gas analysis patterns obtained by SPI-MS however, contain specific molecular information about the samples. Shifts in the summed spectra, which can be clearly observed with our technique, result from differently favored degradation reactions due to the respective structure. Pyrolysis gas chromatography mass spectrometry (Py-GC-EI-MS) was used to support the assignment of pyrolysis products. Principal component analysis was successfully applied to reduce the complexity of data and find suitable markers. The obtained grouping is based on the molecular fingerprint of the samples and is strongly influenced by short-chain branching. Short and medium alkenes and dienes have the strongest impact on the first four principal components. Thus, two marker ratios could be defined, which also give a comprehensible and robust grouping. Butene and pentene were the most abundant signals in our set of samples. With STA-PI-MS, a broad range of pyrolysis products can be measured at the same time, possibly extending the range for quantifiable short-chain branches to more than six carbon atoms for PE. Unfortunately, no clear trend between long-chain branching and any grouping was observed. The quite universal and soft single photon ionization enables access to many different compound classes and hence other polymers can be studied.
RESUMO
An analytical methodology with mass spectrometry as the core technique was developed for precise characterization of end groups, size, and co-monomeric composition of poly(lactic-co-glycolic acid) (PLGA) copolymers, as a preliminary step to qualify their biodegradability. Four PLGA samples were studied, with GA molar content varying from 0 to 50% and Mw ranging from 18 to 75 kg mol-1 according to the supplier. Size exclusion chromatography (SEC) and liquid state nuclear magnetic resonance (NMR) were used as either complementary or validation techniques. As confirmed by tandem mass spectrometry (MS/MS) experiments, macrocycles were most prominent in the low mass range. Nevertheless, elemental compositions derived from high resolution (HR) mass measurements of linear species were consistent with chain terminations revealed by NMR. Off-line coupling of SEC with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) permitted calibration curves to be built based on absolute molecular weights and, although slightly overestimated, so-obtained Mn and Mw values compared well with SEC and NMR results. Homogeneity of the co-monomeric content of all chains within each PLGA sample was demonstrated using surface-assisted laser desorption/ionization in a reactive mode (reactive-SALDI), a newly developed technique that takes advantage of residual acid on desorption ionization using through-hole alumina membrane (DIUTHAME) chips to induce dissociation of high-molecular-weight polymers containing cleavable C-O bonds. All HRMS data were best handled with Kendrick analysis, which helped reveal minor species and allowed automated computation of congested mass spectra.
RESUMO
We present a novel and single detection approach that enables sensitive, accurate and compound-independent quantification of N, S and H in the individual compounds present in complex samples. Integration of the whole chromatographic profile gives the total content of the elements. Simultaneous universal detection is also achieved using the C profile.
RESUMO
Rational characterization of most organometallic compounds is hampered by their high reactivity, in particular, toward oxygen and water. Mass spectrometry experiments require physical introduction of the sample in the ionization source. So, the main challenge is to transfer air-sensitive organometallic compounds from inert atmosphere to the ionization source. In this aim, we have developed an easy technique that allows the analysis of air-sensitive compounds using the atmospheric solid analysis probe (ASAP). This method consists of a glass capillary filled with the sample (solid or liquid) and sealed by a paraffin plug to maintain the inert sample until the ionization process. It is illustrated through the structural characterization of a new highly air-sensitive dinuclear zirconium complex supported by an original switchable stilbene platform.