Phase transitions study of the liquid crystal DIO with a ferroelectric nematic, a nematic, and an intermediate phase and of mixtures with the ferroelectric nematic compound RM734 by adiabatic scanning calorimetry.

High-resolution calorimetry has played a significant role in providing detailed information on phase transitions in liquid crystals. In particular, adiabatic scanning calorimetry (ASC), capable of providing simultaneous information on the temperature dependence of the specific enthalpy h(T) and on the specific heat capacity c_{p}(T), has proven to be an important tool to determine the order of transitions and render high-resolution information on pretransitional thermal behavior. Here we report on ASC results on the compound 2,3',4',5'-tetrafluoro[1,1'-biphenyl]-4-yl 2,6-difluoro-4-(5-propyl-1,3-dioxan-2-yl) benzoate (DIO) and on mixtures with 4-[(4-nitrophenoxy)carbonyl]phenyl 2,4-dimethoxybenzoate (RM734). Both compounds exhibit a low-temperature ferroelectric nematic phase (N_{F}) and a high-temperature paraelectric nematic phase (N). However, in DIO these two phases are separated by an intermediate phase (N_{x}). From the detailed data of h(T) and c_{p}(T), we found that the intermediate phase was present in all the mixtures over the complete composition range, albeit with strongly decreasing temperature width for that phase with decreasing mole fraction of DIO (x_{DIO}). The x_{DIO} dependence on the transition temperatures for both transitions could be well described by a quadratic function. Both these transitions were weakly first order. The true latent heat of the N_{x}-N transition of DIO was as low as L=0.0075±0.0005J/g and L=0.23±0.03J/g for the N_{F}-N_{x} transition, which is about twice the previously reported value of 0.115 J/g for the N_{F}-N transition in RM734. In the mixtures both transition latent heats decrease gradually with decreasing x_{DIO}. At all the N_{x}-N transitions pretransition fluctuation effects are absent and these transitions are purely but very weakly first order. As in RM734 the transition from the N_{F} to the higher-temperature phase exhibits substantial pretransitional behavior, in particular, in the high-temperature phase. Power-law analysis of c_{p}(T) resulted in an effective critical exponent α=0.88±0.1 for DIO and this value decreased in the mixtures with decreasing x_{DIO} toward α=0.50±0.05 reported for RM734. Ideal mixture analysis of the phase diagram was consistent with ideal mixture behavior provided the total transition enthalpy change was used in the analysis.

Converting sunlight into audible sound by means of the photoacoustic effect: The Heliophone.

One hundred and thirty-five years after Alexander Graham Bell and his assistant Charles Sumner Tainter explored the photoacoustic effect, and about 40 years after Rosencwaig and Gersho modeled the effect in a photoacoustic cell configuration, the phenomenon is revisited in a "Heliophone" device that converts sunlight into sound. The light is focused on a carbon blackened copper coated Kapton foil in an acoustic cell by means of a compound parabolic collimator, and its intensity is modulated by a mechanical chopper. A horn is employed to make the sound audible without electronic amplification. The description of the photoacoustic effect that was introduced by Rosencwaig and Gersho is extended to a cell-horn configuration, in which the periodically heated air above the foil acts as an oscillating piston, driving acoustic waves in the horn. The pressure in the cavity-horn assembly is calculated by considering the air layer piston as an equivalent volume velocity source. The importance of the carbon black (soot) layer to enhance light absorption, but above all to enhance the photothermal excitation efficiency, is elucidated by means of an experimentally supported physical model.

Determination of thermoelastic material properties by differential heterodyne detection of impulsive stimulated thermal scattering.

The underlying working principle of detecting impulsive stimulated scattering signals in a differential configuration of heterodyne diffraction detection is unraveled by involving optical scattering theory. The feasibility of the method for the thermoelastic characterization of coating-substrate systems is demonstrated on the basis of simulated data containing typical levels of noise. Besides the classical analysis of the photoacoustic part of the signals, which involves fitting surface acoustic wave dispersion curves, the photothermal part of the signals is analyzed by introducing thermal wave dispersion curves to represent and interpret their grating wavelength dependence. The intrinsic possibilities and limitations of both inverse problems are quantified by making use of least and most squares analysis.

Retinoic acid synergizes ATO-mediated cytotoxicity by precluding Nrf2 activity in AML cells.

BACKGROUND: Standard therapy for acute promyelocytic leukaemia (APL) includes retinoic acid (all-trans retinoic acid (ATRA)), which promotes differentiation of promyelocytic blasts. Although co-administration of arsenic trioxide (ATO) with ATRA has emerged as an effective option to treat APL, the molecular basis of this effect remains unclear. METHODS: Four leukaemia cancer human models (HL60, THP-1, NBR4 and NBR4-R2 cells) were treated either with ATO alone or ATO plus ATRA. Cancer cell survival was monitored by trypan blue exclusion and DEVDase activity assays. Gene and protein expression changes were assessed by RT-PCR and western blot. RESULTS: ATO induced an antioxidant response characterised by Nrf2 nuclear translocation and enhanced transcription of downstream target genes (that is, HO-1, NQO1, GCLM, ferritin). In cells exposed to ATO plus ATRA, the Nrf2 nuclear translocation was prevented and cytotoxicity was enhanced. HO-1 overexpression reversed partially the cytotoxicity by ATRA-ATO in HL60 cells. The inhibitory effects of ATRA on ATO-mediated responses were not observed in either the ATRA-resistant NB4-R2 cells or in NB4 cells pre-incubated with the RARα antagonist Ro-41-52-53. CONCLUSIONS: The augmented cytotoxicity observed in leukaemia cells following combined ATO-ATRA treatment is likely due to inhibition of Nrf2 activity, thus explaining the efficacy of combined ATO-ATRA treatment in the APL therapy.

Antiproliferative effects of phenylaminonaphthoquinones are increased by ascorbate and associated with the appearance of a senescent phenotype in human bladder cancer cells.

Quinone-containing molecules have been developed against cancer mainly for their redox cycling ability leading to reactive oxygen species (ROS) formation. We have previously shown that donor-acceptor phenylaminonaphthoquinones are biologically active against a panel of cancer cells. In this report, we explored the mechanisms involved in cancer cell growth inhibition caused by two phenylaminonaphthoquinones, namely Q7 and Q9, with or without ascorbate (ASC). The results show that Q7 and Q9 are both redox cyclers able to form ROS, which strongly inhibit the proliferation of T24 cells. Q9 was a better redox cycler than Q7 because of marked stabilization of the semiquinone radical species arising from its reduction by ascorbate. Indeed, ASC dramatically enhances the inhibitory effect of Q9 on cell proliferation. Q9 plus ASC impairs the cell cycle, causing a decrease in the number of cells in the G2/M phase without involving other cell cycle regulating key proteins. Moreover, Q9 plus ASC influences the MAPK signaling pathways, provoking the appearance of a senescent cancer cell phenotype and ultimately leading to necrotic-like cell death. Because cellular senescence limits the replicative capacity of cells, our results suggest that induction of senescence may be exploited as a basis for new approaches to cancer therapy.

Towards an understanding and control of cavitation activity in 1 MHz ultrasound fields.

Various industrial processes such as sonochemical processing and ultrasonic cleaning strongly rely on the phenomenon of acoustic cavitation. As the occurrence of acoustic cavitation is incorporating a multitude of interdependent effects, the amount of cavitation activity in a vessel is strongly depending on the ultrasonic process conditions. It is therefore crucial to quantify cavitation activity as a function of the process parameters. At 1 MHz, the active cavitation bubbles are so small that it is becoming difficult to observe them in a direct way. Hence, another metrology based on secondary effects of acoustic cavitation is more suitable to study cavitation activity. In this paper we present a detailed analysis of acoustic cavitation phenomena at 1 MHz ultrasound by means of time-resolved measurements of sonoluminescence, cavitation noise, and synchronized high-speed stroboscopic Schlieren imaging. It is shown that a correlation exists between sonoluminescence, and the ultraharmonic and broadband signals extracted from the cavitation noise spectra. The signals can be utilized to characterize different regimes of cavitation activity at different acoustic power densities. When cavitation activity sets on, the aforementioned signals correlate to fluctuations in the Schlieren contrast as well as the number of nucleated bubbles extracted from the Schlieren Images. This additionally proves that signals extracted from cavitation noise spectra truly represent a measure for cavitation activity. The cyclic behavior of cavitation activity is investigated and related to the evolution of the bubble populations in the ultrasonic tank. It is shown that cavitation activity is strongly linked to the occurrence of fast-moving bubbles. The origin of this "bubble streamers" is investigated and their role in the initialization and propagation of cavitation activity throughout the sonicated liquid is discussed. Finally, it is shown that bubble activity can be stabilized and enhanced by the use of pulsed ultrasound by conserving and recycling active bubbles between subsequent pulsing cycles.

Enhancement of cavitation activity and particle removal with pulsed high frequency ultrasound and supersaturation.

Megasonic cleaning as applied in leading edge semiconductor device manufacturing strongly relies on the phenomenon of acoustic cavitation. As the occurrence of acoustic cavitation is incorporating a multitude of interdependent effects, the amount of cavitation activity in the cleaning liquid strongly depends on the sonication conditions. It is shown that cavitation activity as measured by means of ultraharmonic cavitation noise can be significantly enhanced when pulsed sonication is applied to a gas supersaturated liquid under traveling wave conditions. It is demonstrated that this enhancement coincides with a dramatic increase in particle removal and is therefore of great interest for megasonic cleaning applications. It is demonstrated that the optimal pulse parameters are determined by the dissolution time of the active bubbles, whereas the amount of cavitation activity depends on the ratio between pulse-off and pulse-on time as well as the applied acoustic power. The optimal pulse-off time is independent of the corresponding pulse-on time but increases significantly with increasing gas concentration. We show that on the other hand, supersaturation is needed to enable acoustic cavitation at aforementioned conditions, but has to be kept below values, for which active bubbles cannot dissolve anymore and are therefore lost during subsequent pulses. For the applicable range of gas contents between 100% and 130% saturation, the optimal pulse-off time reaches values between 150 and 340 ms, respectively. Full particle removal of 78 nm-diameter silica particles at a power density of 0.67 W/cm(2) is obtained for the optimal pulse-off times. The optimal pulse-off time values are derived from the dissolution time of bubbles with a radius of 3.3 µm and verified experimentally. The bubble radius used in the calculations corresponds to the linear resonance size in a 928 kHz sound field, which demonstrates that the recycling of active bubbles is the main enhancement mechanism. The optimal choice of the pulsing conditions however is constrained by the trade-off between the effective sonication time and the desire to have a sufficient amount of active bubbles at lower powers, which might be necessary if very delicate structures have to be cleaned.

Interaction of Lamb modes with an inclusion.

The interaction of Lamb modes propagating in a steel plate containing a thin inclusion is analyzed for cases where the inclusion material has elastic parameters similar to the ones of the plate, and where the inclusion is in perfect mechanical contact with the surrounding plate material. A modal decomposition method is used to calculate the conversion of an incident Lamb mode to other modes. Hence, the influence of the type of incident mode, of the location and geometry of the inclusion, and of the elastic parameters of the inclusion and plate material on the mode conversion coefficients is analyzed. Besides the expected increase of the conversion efficiency with increasing cross section of the inclusion, it is found that due to reasons of symmetry, the presence of an inclusion leads to an efficient conversion of an incident S0 mode into reflected and transmitted A0 modes, unless the inclusion is located very close to the plate center. On the other hand, the conversion efficiency of an incident A0 mode into a reflected A0 mode is found to be strongly dependent on the depth of the inclusion, this conversion even disappearing for some location depths. For the cases studied, the inclusion location dependence of the mode conversion seems to be correlated with the normal profile of the longitudinal normal stress component σ(yy)(y). As intuitively expected, the mode conversion efficiency increases with the mismatch of an acoustic impedance like factor between the uniform plate and the inclusion region.

Evidence from adiabatic scanning calorimetry for the Halperin-Lubensky-Ma effect at the N-SmA phase transitions in mixtures of 7OCB+heptane with an injected SmA phase.

The high-resolution adiabatic scanning calorimetric technique has been used to investigate the nematic-smectic A transition (N-SmA in binary mixtures of the non-smectogenic liquid crystal heptyloxycyanobiphenyl (7OCB) and heptane, exhibiting a so-called injected smectic A phase. With the exception of a mixture with the lowest heptane mole fraction for which only an upper limit of 0.2 ± 0.2 J kg(-1) for a possible latent heat could be obtained, for all other mixtures finite latent heats were obtained. The mole fraction dependence of the latent heat could be well fitted with a crossover function consistent with a mean-field free energy expression with a non-zero cubic term arising from the Halperin-Lubensky-Ma (HLM) coupling between the SmA order parameter and the orientational director fluctuations. The mole fraction dependence of the heat capacity effective critical exponents is similar to that observed in mixtures of the two liquid crystals octyloxycyanobiphenyl (8OCB) and nonylcyanobiphenyl (9OCB). The thermal behavior observed along the N-SmA phase transition line yields further strong evidence for the HLM coupling effect.

Inhibition of cell proliferation and migration by oxidative stress from ascorbate-driven juglone redox cycling in human bladder-derived T24 cells.

The effects of juglone on T24 cells were assessed in the presence and absence of ascorbate. The EC(50) value for juglone at 24 h decreased from 28.5 µM to 6.3 µM in the presence of ascorbate. In juglone-treated cells, ascorbate increased ROS formation (4-fold) and depleted GSH (65%). N-acetylcysteine or catalase restricted the juglone/ascorbate-mediated effects, highlighting the role of oxidative stress in juglone cytotoxicity. Juglone alone or associated with ascorbate did not cause caspase-3 activation or PARP cleavage, suggesting necrosis-like cell death. DNA damage and the mild ER stress caused by juglone were both enhanced by ascorbate. In cells treated with juglone (1-5 µM), a concentration-dependent decrease in cell proliferation was observed. Ascorbate did not impair cell proliferation but its association with juglone led to a clonogenic death state. The motility of ascorbate-treated cells was not affected. Juglone slightly restricted motility, but cells lost their ability to migrate most noticeably when treated with juglone plus ascorbate. We postulate that juglone kills cells by a necrosis-like mechanism inhibiting cell proliferation and the motility of T24 cells. These effects are enhanced in the presence of ascorbate.

Time-resolved monitoring of cavitation activity in megasonic cleaning systems.

The occurrence of acoustic cavitation in the cleaning liquid is a crucial precondition for the performance of megasonic cleaning systems. Hence, a fundamental understanding of the impact of different parameters of the megasonic process on cavitation activity is necessary. A setup capable of synchronously measuring sonoluminescence and acoustic emission originating from acoustically active bubbles is presented. The system also includes a high-speed-stroboscopic Schlieren imaging system to directly visualize the influence of cavitation activity on the Schlieren contrast and resolvable bubbles. This allows a thorough characterization of the mutual interaction of cavitation bubbles with the sound field and with each other. Results obtained during continuous sonication of argon-saturated water at various nominal power densities indicate that acoustic cavitation occurs in a cyclic manner, during which periods of stable and inertial cavitation activity alternate. The occurrence of higher and ultraharmonics in the acoustic emission spectra is characteristic for the stable cavitation state. The inertial cavitation state is characterized by a strong attenuation of the sound field, the explosive growth of bubbles and the occurrence of broadband components in the acoustic spectra. Both states can only be sustained at sufficiently high intensities of the sound field. At lower intensities, their occurrences are limited to short, random bursts. Cleaning activity can be linked to the cavitation activity through the measurement of particle removal on standard 200 mm silicon wafers. It is found that the particle removal efficiency is reduced, when a continuous state of cavitation activity ceases to exist.

Fragility of supercooled liquids from differential scanning calorimetry traces: theory and experiment.

Starting from the Debye model for frequency-dependent specific heat and the Vogel-Fulcher-Tammann (VFT) model for its relaxation time, an analytic expression is presented for the heat capacity versus temperature trace for differential scanning calorimetry (DSC) of glass transitions, suggesting a novel definition of the glass transition temperature based on a dimensionless criterion. An explicit expression is presented for the transition temperature as a function of the VFT parameters and the cooling rate, and for the slope as a function of fragility. Also a generalization of the results to non-VFT and non-Debye relaxation is given. Two unique ways are proposed to tackle the inverse problem, i.e., to extract the fragility from an experimental DSC trace. Good agreement is found between theoretically predicted DSC traces and experimental DSC traces for glycerol for different cooling rates.

Medium characterization from interface-wave impedance and ellipticity using simultaneous displacement and pressure measurements.

The interface-wave impedance and ellipticity are wave attributes that interrelate the full waveforms as observed in different components. For each of the fluid/elastic-solid interface waves, i.e., the pseudo-Rayleigh (pR) and Stoneley (St) waves, the impedance and ellipticity are found to have different functional dependencies on Young's modulus and Poisson's ratio. By combining the attributes in a cost function, unique and stable estimates of these parameters can be obtained, particularly when using the St wave. In a validation experiment, the impedance of the laser-excited pR wave is successfully extracted from simultaneous measurements of the normal particle displacement and the fluid pressure at a water/aluminum interface. The displacement is measured using a laser Doppler vibrometer (LDV) and the pressure with a needle hydrophone. Any LDV measurement is perturbed by refractive-index changes along the LDV beam once acoustic waves interfere with the beam. Using a model that accounts for these perturbations, an impedance decrease of 28% with respect to the plane wave impedance of the pR wave is predicted for the water/aluminum configuration. Although this deviation is different for the experimentally extracted impedance, there is excellent agreement between the observed and predicted pR waveforms in both the particle displacement and fluid pressure.

Molecular chaperone Hsp90 as a target for oxidant-based anticancer therapies.

Hsp90 is a molecular chaperone involved in the stabilization of many oncoproteins that are required for the acquisition and maintenance of the so-called six major hallmarks of cancer cells. Various strategies have, therefore, been developed to inhibit the chaperone activity of Hsp90 and induce cancer cell death through the destabilization of its client proteins. Among these strategies, we have shown that generation of oxidative stress leads to the cleavage and deactivation of Hsp90. Because cancer cells are often deficient in antioxidant enzymes and exhibit higher basal levels of reactive oxygen species (ROS) than their normal counterparts, inducing a selective oxidative stress may be a promising approach for cancer treatment. Thus, many redox-modulating agents have, therefore, been developed or are undergoing clinical trials and Hsp90 represents a new target for oxidative stress-generating agents. The purpose of this article is to review the current state of knowledge about Hsp90 and the use of oxidative stress-generating agents in cancer treatment. We will illustrate the review with some of our results concerning the effects of oxidative stress on Hsp90 using various oxidative stress-generating systems based on different quinones in combination with a well-known reducing agent (i.e., ascorbate). Our results show that oxidative stress provokes the cleavage of Hsp90 in CML cells, as well as the degradation of its client protein Bcr-Abl and the deactivation of its downstream signaling pathways, namely MAPK and STAT5. Overall, these results highlight the potential interest of using oxidative stress to target Hsp90.

Redox-active quinones and ascorbate: an innovative cancer therapy that exploits the vulnerability of cancer cells to oxidative stress.

Cancer cells are particularly vulnerable to treatments impairing redox homeostasis. Reactive oxygen species (ROS) can indeed play an important role in the initiation and progression of cancer, and advanced stage tumors frequently exhibit high basal levels of ROS that stimulate cell proliferation and promote genetic instability. In addition, an inverse correlation between histological grade and antioxidant enzyme activities is frequently observed in human tumors, further supporting the existence of a redox dysregulation in cancer cells. This biochemical property can be exploited by using redox-modulating compounds, which represent an interesting approach to induce cancer cell death. Thus, we have developed a new strategy based on the use of pharmacologic concentrations of ascorbate and redox-active quinones. Ascorbate-driven quinone redox cycling leads to ROS formation and provoke an oxidative stress that preferentially kill cancer cells and spare healthy tissues. Cancer cell death occurs through necrosis and the underlying mechanism implies an energetic impairment (ATP depletion) that is likely due to glycolysis inhibition. Additional mechanisms that participate to cell death include calcium equilibrium impairment and oxidative cleavage of protein chaperone Hsp90. Given the low systemic toxicity of ascorbate and the impairment of crucial survival pathways when associated with redox-active quinones, these combinations could represent an original approach that could be combined to standard cancer therapy.

Nonlinear modulation of Lamb modes by clapping delamination.

The nonlinear interaction between a high frequency probing Lamb wave and a bilayer containing a tangential delamination at the interlayer interface, whose contact conditions are dynamically changing due to a high amplitude Lamb wave with a long wavelength, is modeled in a quasistationary approach. The impact of the evolution of the contact condition on the mode conversion coefficients that describe the interaction of the probing wave with the delamination region leads to spectral enrichment due to cross-modulation spectral components between the probing wave and the modulating wave. The dynamical behavior of the normal displacement at the externally accessible surfaces is investigated for two different types of incident probing wave, both for an absorbing and a nonabsorbing bilayer structure, for variations in the contact quality modulation and as a function of defect size. The results can serve as a parametric guide for experimentalists considering the use of nonlinear harmonic generation of Lamb waves as a tool for nondestructive testing of bilayers, such as rubber-steel composites, in storage tanks and pipelines.

Thermotropic phase behaviour of the pseudobinary mixtures of DPPC/C12E5 and DMPC/C12E5 determined by differential scanning calorimetry and ultrasonic velocimetry.

The present paper reports on the phase behaviour of the pseudobinary aqueous mixtures of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/pentaethylene glycol monododecyl ether (C12E5) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine monohydrate (DMPC)/C12E5. Both systems exhibit a variety of mesophases, such as lamellar gel, liquid crystalline and micellar phases. The phase diagrams show peritectic and eutectic behaviours. The existence of a compound complex is established. From the phase diagrams, the temperature dependence of the solubilisation parameters is obtained. The phase diagrams, especially with respect to the solubilisation process were qualitatively explained assuming that the packing of the constituents plays a dominating role. Finally, differential scanning calorimetry and ultrasonic velocimetry are compared concerning their potentials to determine characteristics of phase transitions in pseudobinary phospholipid/surfactant mixtures.

Weakly first-order character of the nematic-isotropic phase transition in liquid crystals.

The classification of phase transitions in first-order and second-order (or continuous) ones is widely used. The nematic-to-isotropic (NI) transition in liquid crystals is a weakly first-order transition, with only small discontinuities in enthalpy and specific volume at the transition which are not always easy to measure. On the other hand, fluctuation effects near the transition, typical for a continuous transition, are present because of the only weakly first-order character. In a recent paper [Phys. Rev. E 69, 022701 (2004)], it was concluded from the static dielectric permittivity in the isotropic phase near the NI transition that less polar mesogens (with little or no pretransitional effects) are characteristic for a first-order NI phase transition, whereas in the case of strongly polar ones (with large pretransitional effects) the NI transition is close to second order. In this paper, we address the question whether it is, indeed, possible to use these fluctuation effects in the isotropic phase to quantify the "strength" of a weakly first-order transition, i.e., how far it is from second order. Therefore, we measured the temperature dependence of the enthalpy near the NI transition of seven liquid crystals with adiabatic scanning calorimetry and compared the measured values of the latent heat with pretransitional effects in the dielectric constant and the specific heat capacity. The compounds used in the comparison are MBBA, 5CB, 8CB, 5NCS, 5CN, 8CHBT, and D7AB. From our analysis we find, contrary to the assertion in the above reference, no correlation between the strength of the NI transition of a given compound and the pretransitional effects observed, neither dielectrically, nor thermally.

Dielectric spectroscopy of aerosil-dispersed liquid crystal embedded in Anopore membranes.

The complex dielectric permittivity epsilon* values are presented for aerosil-dispersed 4-pentyl-4-cyanobiphenyl (5CB) confined in Anopore membranes. The dielectric permittivities are measured in the frequency range from 10(-2) Hz to 1 GHz at temperatures ranging from 50 degrees C down to -20 degrees C. In bulk 5CB, which has only a nematic phase, there exist two main relaxation processes: one due to the rotation of molecules around their short axes for parallel orientation of the director to the probing field and another fast relaxation process due to the librational motion of molecules for perpendicular orientation. Inside Anopore membranes both these main relaxation processes can be observed, but with subtle differences. The relaxation process due to the rotation of molecules around the short axis is faster in Anopores at all temperatures in comparison with the bulk process. Hydrophilic aerosil particles, when dispersed in the liquid-crystal (LC) phase, attach to each other via hydrogen bonds and form a three-dimensional interconnecting aerosil network, thus dividing the LC phase into small domains. Dispersing 5CB with different concentrations of hydrophilic aerosils leads to a decrease in relaxation time with aerosil concentration. In these dispersed systems a slow additional relaxation process emerges. This slow process becomes stronger with higher concentrations of aerosil. From our experiments we conclude that this process is the relaxation of 5CB molecules homeotropically aligned to the surface of the aerosil particles. In the case of 5CB-aerosil dispersions enclosed in Anopore membranes this slow process still exists and increases also with aerosil concentration. The relaxation time of the rotation of the 5CB molecules around their short axis systematically increases in these 5CB-aerosil samples in Anopore membranes with aerosil concentration from the 5CB-Anopore behavior towards the behavior observed for 5CB-aerosil dispersions. We explain the evolution as resulting from opposing tendencies from size effects (in the Anopore membranes) and disorder effects (in the aerosil dispersions).

Influence of nanosized confinements on 4-n-decyl-4'-cyanobiphenyl (10CB): a broadband dielectric study.

Real (epsilon') and imaginary (epsilon") parts of the complex dielectric permittivity (epsilon*) of the liquid crystal (LC) 4-n-decyl-4'-cyanobiphenyl (10CB) embedded in Anopore membranes and Vycor porous glass, as well as dispersed with hydrophilic aerosils, have been studied by means of broadband dielectric spectroscopy in the frequency range from 10(-2) Hz to 1 GHz . In bulk 10CB, which has a direct transition from an isotropic to a smectic- A phase, there exists one main relaxation process for the parallel orientation of the director with respect to the probing field and a faster one for the perpendicular orientation. All molecular relaxation processes in 10CB are of Debye type and have Arrhenius like temperature dependence. For 10CB embedded in untreated and surface treated cylindrical pores of Anopore membranes the dielectric spectra are similar to the bulk with the exception that both the rotation around the short axis and the libration motion are faster in the pores. In the case of 10CB dispersed with two different concentrations of hydrophilic aerosils an emergence of a slow relaxation process, which is stronger for the higher concentration, is additionally observed along with the bulklike processes. The slow process in the LC-hydrophilic aerosil system is attributed to the relaxation of the molecules that are homeotropically aligned close to the surfaces of the aerosil particles. This process also has an Arrhenius type of temperature dependence. For 10CB embedded in narrow channels of Vycor porous glass three relaxation processes are observed. Two of these processes are bulklike and are due to the librational motion of molecules and the rotation of molecules around their short axes. The slowest process seems to be a surface process, similar in origin to that observed for 10CB dispersed with hydrophilic aerosils, and is prominent amongst all. The material in the Vycor porous glass could be supercooled by at least 185 degrees below bulk crystallization temperature. The slow process has a Vogel-Fulcher-Tamman (VFT) type of temperature dependence typical for glass formers in this wide temperature range. In addition, the bulklike processes are found to be strongly modified and also have a VFT like temperature dependence from measurements done in a wide temperature range. This behavior is in contrast to other reports of glassy behavior in confined LC, where the glassy behavior as concluded from a slow relaxation process observed in a narrow temperature range.