Operando Investigation of Silicon Anodes During Electrochemical Cycling in Li-ion Batteries.

Silicon (Si) is recognized as a promising anode material for next-generation anodes due to its high capacity. However, large volume expansion and active particle pulverization during cycling rapidly deteriorate the battery performance. The relationship between Si anode particle size and particle pulverization, and the structure evolution of Si particles during cycling is not well understood. In this study, a quantitative, time-resolved "operando" small angle X-ray scattering (SAXS) investigation into the morphological change of unwrapped and reduced graphene oxide (rGO) wrapped Si nanoparticles (Si@rGO) is conducted with respect to the operating voltage. The results provide a clear picture of Si particle size change and the role of nonrigid rGO in mitigating Si volume expansion and pulverization. Further, this study demonstrates the advantage of "operando" SAXS in electrochemical environments as compared to other approaches.

Peptide Self-Assembly Controlled Photoligation of Polymers.

Highly efficient chemical ligations that operate in water under mild conditions are the foundation of bioorthogonal chemistry. However, the toolbox of suitable reactions is limited. Conventional approaches to expand this toolbox aim at altering the inherent reactivity of functional groups to design new reactions that meet the required benchmarks. Inspired by controlled reaction environments that enzymes provide, we report a fundamentally different approach that makes inefficient reactions highly efficient within defined local environments. Contrasting enzymatically catalyzed reactions, the reactivity controlling self-assembled environment is brought about by the ligation targets themselves─avoiding the use of a catalyst. Targeting [2 + 2] photocycloadditions, which are inefficient at low concentrations and readily quenched by oxygen, short ß-sheet encoded peptide sequences are inserted between a hydrophobic photoreactive styrylpyrene unit and a hydrophilic polymer. In water, electrostatic repulsion of deprotonated amino acid residues governs the formation of small self-assembled structures, which enable a highly efficient photoligation of the polymer, reaching ∼90% ligation within 2 min (0.034 mM). Upon protonation at low pH, the self-assembly changes into 1D fibers, altering photophysical properties and shutting down the photocycloaddition reaction. Using the reversible morphology change, it is possible to switch the photoligation "ON" or "OFF" under constant irradiation simply by varying the pH. Importantly, in dimethylformamide, the photoligation reaction did not occur even at 10-fold higher concentrations (0.34 mM). The self-assembly into a specific architecture, encoded into the polymer ligation target, enables a highly efficient ligation that overcomes the concentration limitations and high oxygen sensitivity of [2 + 2] photocycloadditions.

Optoelectronic and Optomechanical Properties of Few-Atomic-Layer Black Phosphorus Nanoflakes as Revealed by In Situ TEM.

The optoelectronic signatures of free-standing few-atomic-layer black phosphorus nanoflakes are analyzed by in situ transmission electron microscopy (TEM). As compared to other 2D materials, the band gap of black phosphorus (BP) is related directly to multiple thicknesses and can be tuned by nanoflake thickness and strain. The photocurrent measurements with the TEM show a stable response to infrared light illumination and change of nanoflakes band gap with deformation while pressing them between two electrodes assembled in the microscope. The photocurrent spectra of an 8- and a 6-layer BP nanoflake samples are comparatively measured. Density functional theory (DFT) calculations are performed to identify the band structure changes of BP during deformations. The results should help to find the best pathways for BP smart band gap engineering via tuning the number of material atomic layers and programmed deformations to promote future optoelectronic applications.

Strategic design of Fe and N co-doped hierarchically porous carbon as superior ORR catalyst: from the perspective of nanoarchitectonics.

In this study, we present microporous carbon (MPC), hollow microporous carbon (HMC) and hierarchically porous carbon (HPC) to demonstrate the importance of strategical designing of nanoarchitectures in achieving advanced catalyst (or electrode) materials, especially in the context of oxygen reduction reaction (ORR). Based on the electrochemical impedance spectroscopy and ORR studies, we identify a marked structural effect depending on the porosity. Specifically, mesopores are found to have the most profound influence by significantly improving electrochemical wettability and accessibility. We also identify that macropore contributes to the rate capability of the porous carbons. The results of the rotating ring disk electrode (RRDE) method also demonstrate the advantages of strategically designed double-shelled nanoarchitecture of HPC to increase the overall electron transfer number (n) closer to four by offering a higher chance of the double two-electron pathways. Next, selective doping of highly active Fe-N x sites on HPC is obtained by increasing the nitrogen content in HPC. As a result, the optimized Fe and N co-doped HPC demonstrate high ORR catalytic activity comparable to the commercial 20 wt% Pt/C in alkaline electrolyte. Our findings, therefore, strongly advocate the importance of a strategic design of advanced catalyst (or electrode) materials, especially in light of both structural and doping effects, from the perspective of nanoarchitectonics.

Expeditious Electrochemical Synthesis of Mesoporous Chalcogenide Flakes: Mesoporous Cu2 Se as a Potential High-Rate Anode for Sodium-Ion Battery.

Nanostructured copper selenide (Cu2 Se) attracts much interest as it shows outstanding performance as thermoelectric, photo-thermal, and optical material. The mesoporous structure is also a promising morphology to obtain better performance for electrochemical and catalytic applications, thanks to its high surface area. A simple one-step electrochemical method is proposed for mesoporous chalcogenides synthesis. The synthesized Cu2 Se material has two types of mesopores (9 and 18 nm in diameter), which are uniformly distributed inside the flakes. These materials are also implemented for sodium (Na) ion battery (NIB) anode as a proof of concept. The electrode employing the mesoporous Cu2 Se exhibits superior and more stable specific capacity as a NIB anode compared to the non-porous samples. The electrode also exhibits excellent rate tolerance at each current density, from 100 to 1000 mA g-1 . It is suggested that the mesoporous structure is advantageous for the insertion of Na ions inside the flakes. Electrochemical analysis indicates that the mesoporous electrode possesses more prominent diffusion-controlled kinetics during the sodiation-desodiation process, which contributes to the improvement of Na-ion storage performance.

Optomechanical Properties of MoSe2 Nanosheets as Revealed by In Situ Transmission Electron Microscopy.

Free-standing few-layered MoSe2 nanosheet stacks optoelectronic signatures are analyzed by using light compatible in situ transmission electron microscopy (TEM) utilizing an optical TEM holder allowing for the simultaneous mechanical deformation, electrical probing and light illumination of a sample. Two types of deformation, namely, (i) bending of nanosheets perpendicular to their basal atomic planes and (ii) edge deformation parallel to the basal atomic planes, lead to two distinctly different optomechanical performances of the nanosheet stacks. The former deformation induces a stable but rather marginal increase in photocurrent, whereas the latter mode is prone to unstable nonsystematic photocurrent value changes and a red-shifted photocurrent spectrum. The experimental results are verified by ab initio calculations using density functional theory (DFT).

Pristine and Antibiotic-Loaded Nanosheets/Nanoneedles-Based Boron Nitride Films as a Promising Platform to Suppress Bacterial and Fungal Infections.

In recent years, bacteria inactivation during their direct physical contact with surface nanotopography has become one of the promising strategies for fighting infection. Contact-killing ability has been reported for several nanostructured surfaces, e.g., black silicon, carbon nanotubes, zinc oxide nanorods, and copper oxide nanosheets. Herein, we demonstrate that Gram-negative antibiotic-resistant Escherichia coli (E. coli) bacteria are killed as a result of their physical destruction while contacting nanostructured h-BN surfaces. BN films, made of spherical nanoparticles formed by numerous nanosheets and nanoneedles with a thickness <15 nm, have been obtained through a reaction of ammonia with amorphous boron. The contact-killing bactericidal effect of BN nanostructures has been compared with a toxic effect of gentamicin released from them. For a wider protection against bacterial and fungal infection, the films have been saturated with a mixture of gentamicin and amphotericin B. Such BN films demonstrate a high antibiotic/antimycotic agent loading capacity and a fast initial and sustained release of therapeutic agents for 170-260 h depending on the loaded dose. The pristine BN films possess high antibacterial activity against E. coli K-261 strain at their initial concentration of 104 cells/mL, attaining >99% inactivation of colony forming units after 24 h, same as gentamicin-loaded (150 µg/cm2) BN sample. The BN films loaded with a mixture of gentamicin (150 and 300 µg/cm2) and amphotericin B (100 µg/cm2) effectively inhibit the growth of E. coli K-261 and Neurospora crassa strains. During immersion in the normal saline solution, the BN film generates reactive oxygen species (ROS), which can lead to accelerated oxidative stress at the site of physical cell damage. The obtained results are valuable for further development of nanostructured surfaces having contact killing, ROS, and biocide release abilities.

Crystallography-Derived Young's Modulus and Tensile Strength of AlN Nanowires as Revealed by in Situ Transmission Electron Microscopy.

Aluminum nitride (AlN) has a unique combination of properties, such as high chemical and thermal stability, nontoxicity, high melting point, large energy band gap, high thermal conductivity, and intensive light emission. This combination makes AlN nanowires (NWs) a prospective material for optoelectronic and field-emission nanodevices. However, there has been very limited information on mechanical properties of AlN NWs that is essential for their reliable utilization in modern technologies. Herein, we thoroughly study mechanical properties of individual AlN NWs using direct,  in situ bending and tensile tests inside a high-resolution TEM. Overall, 22 individual NWs have been tested, and a strong dependence of their Young's moduli and ultimate tensile strengths (UTS) on their growth axis crystallographic orientation is documented. The Young's modulus of NWs grown along the [101̅1] orientation is found to be in a range 160-260 GPa, whereas for those grown along the [0002] orientation it falls within a range 350-440 GPa. In situ TEM tensile tests demonstrate the UTS values up to 8.2 GPa for the [0002]-oriented NWs, which is more than 20 times larger than that of a bulk AlN compound. Such properties make AlN nanowires a highly promising material for the reinforcing applications in metal matrix and other composites. Finally, experimental results were compared and verified under a density functional theory simulation, which shows the pronounced effect of growth axis on the AlN NW mechanical behavior. The modeling reveals that with an increasing NW width the Young's modulus tends to approach the elastic constants of a bulk material.

Fabrication and application of BN nanoparticles, nanosheets and their nanohybrids.

Smart implementation of novel advanced nanomaterials is the key for the solution of many complex problems of modern science. In recent years, there has been a great interest in the synthesis and application of boron nitride (BN) nanotubes because of their unique physical, chemical, and mechanical properties. By contrast, the synthesis, characterization and exploration of other morphological types of BN nanostructure - BN nanoparticles and BN nanosheets - have received less attention. However, the detailed investigations on advantages of every morphological BN type for specific applications have only recently been started. One of the promising directions is the utilization of BN-based nanohybrids. This review is dedicated to the in-depth analysis of recently published works on the fabrication and application of BN nanoparticles, nanosheets, and their nanohybrids. It covers a variety of developed synthetic methods toward fabrication of such nanostructures, and their specific application potentials in catalysis, drug delivery, tribology and structural materials. Finally, the review focuses on the theoretical aspects of this quickly emerging field.

Photocatalysis with Pt-Au-ZnO and Au-ZnO Hybrids: Effect of Charge Accumulation and Discharge Properties of Metal Nanoparticles.

Metal-semiconductor hybrid nanomaterials are becoming increasingly popular for photocatalytic degradation of organic pollutants. Herein, a seed-assisted photodeposition approach is put forward for the site-specific growth of Pt on Au-ZnO particles (Pt-Au-ZnO). A similar approach was also utilized to enlarge the Au nanoparticles at epitaxial Au-ZnO particles (Au@Au-ZnO). An epitaxial connection at the Au-ZnO interface was found to be critical for the site-specific deposition of Pt or Au. Light on-off photocatalysis tests, utilizing a thiazine dye (toluidine blue) as a model organic compound, were conducted and confirmed the superior photodegradation properties of Pt-Au-ZnO hybrids compared to Au-ZnO. In contrast, Au-ZnO type hybrids were more effective toward photoreduction of toluidine blue to leuco-toluidine blue. It was deemed that photoexcited electrons of Au-ZnO (Au, ∼5 nm) possessed high reducing power owing to electron accumulation and negative shift in Fermi level/redox potential; however, exciton recombination due to possible Fermi-level equilibration slowed down the complete degradation of toluidine blue. In the case of Au@Au-ZnO (Au, ∼15 nm), the photodegradation efficiency was enhanced and the photoreduction rate reduced compared to Au-ZnO. Pt-Au-ZnO hybrids showed better photodegradation and mineralization properties compared to both Au-ZnO and Au@Au-ZnO owing to a fast electron discharge (i.e. better electron-hole seperation). However, photoexcited electrons lacked the reducing power for the photoreduction of toluidine blue. The ultimate photodegradation efficiencies of Pt-Au-ZnO, Au@Au-ZnO, and Au-ZnO were 84, 66, and 39%, respectively. In the interest of effective metal-semiconductor type photocatalysts, the present study points out the importance of choosing the right metal, depending on whether a photoreduction and/or photodegradation process is desired.

Compressive properties of hollow BN nanoparticles: theoretical modeling and testing using a high-resolution transmission electron microscope.

Due to their excellent mechanical properties, nanoparticles have great potential as reinforcing phases in composite materials, friction modifiers in liquid lubricants, catalysts and drug-delivery agents. In the present study, the mechanical analysis of individual spherical hollow BN nanoparticles (BNNPs) using a combination of in situ compression tests inside a high-resolution transmission electron microscope (TEM) and theoretical modelling was conducted. It was found that BNNPs display high mechanical stiffness and a large value of elastic recovery. This enables the hollow BNNPs to exhibit considerably large cyclic deformation (up to 30% of the sphere's original external diameter) and to accumulate plastic deformation of approximately 30% of the total compression strain. Theoretical simulations allowed for elucidation of BNNPs' structural changes under compression at the atomic level and explained the origin of their high stiffness and large critical deformation values.

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents.

BN/Ag hybrid nanomaterials (HNMs) and their possible applications as novel active catalysts and antibacterial agents are investigated. BN/Ag nanoparticle (NP) hybrids were fabricated using two methods: (i) chemical vapour deposition (CVD) of BN NPs in the presence of Ag vapours, and (ii) ultraviolet (UV) decomposition of AgNO3 in a suspension of BN NPs. The hybrid microstructures were studied by high-resolution transmission electron microscopy (HRTEM), high-angular dark field scanning TEM imaging paired with energy dispersion X-ray (EDX) mapping, X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FTIR). They were also characterized in terms of thermal stability, Ag+ ion release, catalytic and antibacterial activities. The materials synthesized via UV decomposition of AgNO3 demonstrated a much better catalytic activity in comparison to those prepared using the CVD method. The best catalytic characteristics (100% methanol conversion at 350 °C) were achieved using the UV BN/Ag HNMs without preliminary annealing at 600 °C in an oxidizing atmosphere. Both types of the BN/Ag HNMs possess a profound antibacterial effect against Escherichia coli K-261 bacteria.