Longitudinal bond strength of a universal adhesive and chemical dentin characterization under different acid etching protocols.

OBJECTIVE: This study aimed to analyze the longitudinal bond strength of a universal adhesive and chemically characterize the dentin substrate under different acid etching protocols. METHODOLOGY: Dentin samples were etched with polyacrylic acid 25% (PAA) for 10 seconds (n=3) and phosphoric acid 32% (PA) for 15 seconds (n=3) and analyzed by Fourier transform infrared spectroscopy - attenuated total reflectance (FTIR-ATR) before and after treatment. For collagen degradation, samples (n=12) were divided into 3 groups: PAA, PA, and Deionized water (control), and analyzed by the quantity of solubilized type I collagen C-terminal cross-linked telopeptides and solubilized C-terminal peptide in relation to total protein concentration (ICTPtp and CTXtp) and by their ultimate tensile strength (UTS). For the adhesive interface analysis, dentin samples (n=72) were divided into 3 groups: PAA, PA, and Self-etch (SE), and subdivided into 2 groups: 24 h (baseline) and 1 year. The following tests were performed: microtensile bond strength (µTBS) (n=48), scanning electron microscopy (SEM) (n=12), and nanoleakage (n=12). RESULTS: The FTIR of PAA showed lower reduction of the peaks in the phosphate group when compared to PA. For ICTPtp, PA showed a significantly higher value. For CTXtp, PA and PAA groups failed to statically differ from each other. UTS was significantly lower for PA. For µTBS, storage time significantly affected bond strength. The results were unaffected by the etching protocol. For SEM, after 1 year, PA had little evidence of degradation in the upper third of the adhesive interface in comparison to the other groups. Nanoleakage showed no considerable silver impregnation after 1 year in the SE group. CONCLUSION: The use of PAA prior to a universal adhesive (when compared to PA) represents a less aggressive type of etching to dentin. However, self-etching still seems to be the best option for universal adhesive systems that have functional monomers in their composition.

Longitudinal bond strength of a universal adhesive and chemical dentin characterization under different acid etching protocols

Abstract Objective This study aimed to analyze the longitudinal bond strength of a universal adhesive and chemically characterize the dentin substrate under different acid etching protocols. Methodology Dentin samples were etched with polyacrylic acid 25% (PAA) for 10 seconds (n=3) and phosphoric acid 32% (PA) for 15 seconds (n=3) and analyzed by Fourier transform infrared spectroscopy - attenuated total reflectance (FTIR-ATR) before and after treatment. For collagen degradation, samples (n=12) were divided into 3 groups: PAA, PA, and Deionized water (control), and analyzed by the quantity of solubilized type I collagen C-terminal cross-linked telopeptides and solubilized C-terminal peptide in relation to total protein concentration (ICTPtp and CTXtp) and by their ultimate tensile strength (UTS). For the adhesive interface analysis, dentin samples (n=72) were divided into 3 groups: PAA, PA, and Self-etch (SE), and subdivided into 2 groups: 24 h (baseline) and 1 year. The following tests were performed: microtensile bond strength (μTBS) (n=48), scanning electron microscopy (SEM) (n=12), and nanoleakage (n=12). Results The FTIR of PAA showed lower reduction of the peaks in the phosphate group when compared to PA. For ICTPtp, PA showed a significantly higher value. For CTXtp, PA and PAA groups failed to statically differ from each other. UTS was significantly lower for PA. For μTBS, storage time significantly affected bond strength. The results were unaffected by the etching protocol. For SEM, after 1 year, PA had little evidence of degradation in the upper third of the adhesive interface in comparison to the other groups. Nanoleakage showed no considerable silver impregnation after 1 year in the SE group. Conclusion The use of PAA prior to a universal adhesive (when compared to PA) represents a less aggressive type of etching to dentin. However, self-etching still seems to be the best option for universal adhesive systems that have functional monomers in their composition.

Clinical outcomes of cracked tooth syndrome after 3 years of treatment: a case series / Desfechos clínicos da síndrome do dente trincado após 3 anos de tratamento: uma série de caso

Background: Diagnosis of cracked tooth syndrome (CTS) requires clinical experience and scientific knowledge. Even providing an effective resolution of the symptoms, clinicians must inform their patients that cracks may progress and induce tooth separation. Thus, follow-up is essential. Case-report: This study describes the treatment of patients with cracked tooth syndrome through a series of three cases. It also includes their long-term follow-ups over three years, through clinical probing and radiography. The findings highlight the importance of periodic check-ups to manage potential complications. Regular follow-ups can help control undesirable responses that may cause pain or make future treatments unfeasible. On all the scenarios presented, an endodontic treatment was needed. On the first successful case the radiolucent lesion regressed with no discomfort or pain. The second case was an unsuccessful one. The patient returned to the dental office after 3 years when probing revealed a 10-mm pocket at the distal aspect of the tooth. The radiography showed distal bone loss. The tooth was extracted to prevent bone loss from progressing. The third report documented the treatment of a patient who declined follow-up care and only returned after 3 years. At that point, a severe mobility was apparent. The radiography revealed a large periapical radiolucency with extensive bone loss, and the tooth extraction became necessary. Conclusion: These cases underscore the importance of informing patients about the potential for crack progression and tooth separation and emphasizes the crucial role of regular follow-up care, as well as discussing the possibilities of restorative treatment (au)

Contexto: O diagnóstico da síndrome do dente trincado (SDT) requer experiência clínica e conhecimento científico. Mesmo com a resolução dos sintomas, os clínicos devem informar seus pacientes que as trincas podem progredir e induzir a fratura dos dentes. Assim, o acompanhamento é essencial. Relato do caso: Este estudo descreve o tratamento de pacientes com síndrome do dente trincado através de uma série de três casos e acompanhamento a longo prazo, durante três anos, por meio de sondagem clínica e radiografia (RX). Os resultados destacam a importância dos controles periódicos para gerir potenciais complicações, o que pode ajudar a controlar respostas indesejáveis dolorosas ou inviabilização de tratamentos futuros. Em todos os cenários, foi necessário tratamento endodôntico. No primeiro caso bem-sucedido, a lesão radiolúcida regrediu sem qualquer desconforto ou dor. O segundo caso foi de insucesso. O paciente voltou ao consultório dentário após 3 anos, quando a sondagem revelou uma bolsa de 10 mm na distal do dente, com perda óssea detectada no RX, sendo indicada a extração. O terceiro relatório documentou o tratamento de um paciente que recusou o acompanhamento e só regressou após 3 anos. Nessa altura, era notável uma intensa mobilidade. O RX revelou uma grande radiolucência periapical com extensa perda óssea, sendo necessária a extração do dente. Conclusão: Estes casos destacam a importância de informar os pacientes sobre o potencial de progressão da fissura e separação do dente e enfatiza o papel crucial do acompanhamento regular, além de discutir as possibilidades de tratamento restaurador (AU)

Impact of photoinitiator quality on chemical-mechanical properties of dental adhesives under different light intensities / Impacto da qualidade de fotoiniciadores nas propriedades químico mecânicas de adesivos dentais sob diferentes intensidades de luz

Objective: Evaluate the mechanical properties of experimental adhesive models with different photoinitiators (PI) polymerized by LED units of different power densities. Material and Methods: Three groups of adhesive models based on HEMA/BisGMA (45/55) were prepared in association with different PI combinations: G2 (control) ­ 2 PI: 0.5% CQ, 0.5% EDMAB; G3 - 3 PI: 0.5% CQ; 0.5% DMAEMA, 0.5% DPIHP; G4 - 4 PI: 0.5% CQ; 0.5% EDMAB; 0.5% DMAEMA; 0.5% DPIHP. The three formulations were polymerized at two different LED power densities: 550 mW/cm2 and 1200 mW/cm2. The degree of conversion (DC) of adhesive monomers was monitored in situ through the FTIR for 600 s. Specimens were prepared for each formulation for analysis mong adhesive systems (G2

Objetivo: Avaliar as propriedades mecânicas de modelos adesivos experimentais com diferentes fotoiniciadores (PI) polimerizados por unidades de LED de diferentes densidades de energia. Material e Métodos: Três grupos de modelos adesivos baseados em HEMA/BisGMA (45/55) foram preparados em associação com diferentes combinações de PI: G2 (controle) ­ 2 PI: 0,5% CQ, 0,5% EDMAB; G3 - 3PI: 0,5% CQ; 0,5% DMAEMA, 0,5% DPIHP; G4 - 4 PI: 0,5% CQ; 0,5% EDMAB; 0,5% DMAEMA; 0,5% DPIHP. As três formulações foram polimerizadas em duas densidades de potência de LED: 550 mW/cm2 e 1200 mW/cm2. O grau de conversão (DC) dos monômeros adesivos foi monitorado in situ através do FTIR durante 600 s. Amostras foram preparadas para cada formulação para análise de resistência à flexão (FS), módulo de elasticidade (ME), sorção (SOR) e solubilidade (SOL). Os dados foram submetidos aos testes ANOVA 2-fatores e Tukey (5%). Resultados: DC: houve diferença significativa entre os sistemas adesivos (G2

Scientific writing with artificial intelligence: key considerations and alerts / Escrita científica com inteligência artificial: principais considerações e alertas

A integração de geradores de texto de inteligência artificial (IA) em relatórios científicos exige uma avaliação cuidadosa de considerações éticas específicas. Embora essas tecnologias de IA ofereçam suporte à geração de texto, abordar as implicações éticas é fundamental. Este editorial destaca a necessidade de uma abordagem ponderada e responsável, enfatizando o estabelecimento de diretrizes e melhores práticas por parte de pesquisadores e comunidades científicas. Esforços colaborativos entre desenvolvedores de IA, pesquisadores e comitês éticos podem garantir a integração perfeita das tecnologias de IA, ao mesmo tempo em que mantêm a integridade, qualidade e padrões éticos da divulgação científica. Este texto oferece um resumo abrangente considerações-chave ao se utilizar geradores de texto de inteligência artificial em relatórios científicos (AU)

The integration of artificial intelligence (AI) text generators in scientific reports demands careful evaluation of specific ethical considerations. While these AI technologies offer text generation support, addressing the ethical implications is vital. This editorial highlights the need for a thoughtful and responsible approach, emphasizing the establishment of guidelines and best practices by researchers and scientific communities. Collaborative efforts between AI developers, researchers, and ethical committees can ensure the seamless integration of AI technologies while upholding the integrity, quality, and ethical standards of scientific reporting. This text comprehensively summarizes the key considerations to be followed when utilizing artificial intelligence text generators in scientific reports.(AU)

A história da telemedicina no Brasil: desafios e vantagens / The history of telemedicine in Brazil: challenges and advantages

Resumo A utilização de novas tecnologias de informação para um atendimento mais efetivo e à distância é algo que se impõe no contexto de serviços em saúde, no atual panorama sociopolítico. Entretanto, o Brasil ainda está receoso em integrar de forma permanente esses avanços. Esta pesquisa tem como objetivo revisar os marcos da história da telemedicina no Brasil, destacando as questões éticas e legislativas, bem como evidenciar os desafios para sua implantação e gerar uma proposta para superá-los. Trata-se de uma revisão integrativa da literatura acerca da história, dos desafios e da realidade da telemedicina no cenário brasileiro. A telemedicina é uma atividade recente no Brasil, defrontando-se com resistências por parte dos profissionais, em especial médicos, que diversas vezes não vislumbram claramente seus benefícios. Apesar das dificuldades previstas em aceitar este modelo, é relevante ressaltar as vantagens que esse padrão abarca, como ampliar e facilitar o acesso à assistência de saúde. Propor alternativas para superar resistências e alcançar um padrão otimizado é essencial e abrange maior abertura no campo político, legislativo e educacional.

Abstract The use of new information technologies for a more effective remote service is required in the context of health services, especially when it comes to the current socio-political panorama. Nevertheless, Brazil is still afraid to permanently integrate these advances. This research aims to review the milestones in the history of telemedicine in Brazil, highlighting the ethical and legislative issues, as well as evidencing the challenges for its implementation and generating a proposal to overcome them. It is an integrative literature review about the history, challenges, and reality of telemedicine in the Brazilian scenario. Telemedicine is a recent activity in Brazil, facing resistance from professionals, especially doctors, who often do not clearly see its benefits. Despite the anticipated difficulties in accepting this model, it is important to highlight the advantages that this standard encompasses, such as expanding and facilitating access to health care. Proposing alternatives to overcome resistance and reach an optimized standard is essential and encompasses greater openness in the political, legislative, and educational fields.

Combination of surgical techniques and reconstructive devices as an alternative treatment after fibula free flap mandibular reconstruction failure: a case report

Loss of mandibular continuity and functionality in cancer patients undergoing extensive mandible resections is challenging. In these situations, the gold standard treatment is fibula free flap reconstruction. The major challenge occurs when there is a failure of the transplanted fibula. Here we report the case of a patient who underwent right hemimandibulectomy with disarticulation and immediate mandibular reconstruction with a fibula free flap. Subsequently, the flap viability was lost, and there was necrosis of the transplanted bone segment in the short-term follow-up. Considering the best form of rehabilitation for the patient, minimizing the risks of loss and optimizing the reconstructive quality, we opted to install a customized prosthesis including a condylecavity joint component associated with a new free flap and subsequent rehabilitation of the dental occlusion with an implant-supported fixed prosthesis.

Relative contributions of fossil fuel and biomass burning sources to black carbon aerosol on the Southern Atlantic Ocean Coast and King George Island (Antarctic Peninsula).

Carbonaceous aerosols can affect climate, especially particles containing black carbon (BC). BC originated from the incomplete combustion of fossil fuel and biomass, which can heat the atmosphere and increase ice melting, but little is known about BC sources to Antarctica. We quantified the contribution of distant origin (biomass burning) and local emissions (fossil fuel) to atmospheric BC concentration in the King George Island (Antarctic Peninsula) and the Southern Ocean. We examine the BC concentrations using a multi-wavelength Aethalometer AE-33 and AE-42 aboard the Brazilian Oceanographic Research Ship Almirante Maximiano. The results indicate that the region is influenced by local sources and air masses coming from surrounding continents. Fossil fuel combustion was the major source of carbonaceous aerosols in the region, whereas the total average concentration was 41.8 ± 22.8 ng m-3. The findings indicate a contribution of biomass burning coming from low and mid-latitudes of South America over the Antarctic Peninsula and the Southern Ocean around 62ºS latitude. We demonstrated that fossil fuel is the main contributor to atmospheric BC concentration for the Austral summer and autumn. Scientific stations, local tourism, and traffic are possible local BC sources. Our work invokes the urgency of questionable sustainability issues about Antarctica exploration.

Effect of fluoride, chlorhexidine or Nd:YAG on the progression of root dentin demineralization after removal of the demineralized organic matrix.

OBJECTIVES: Quantification of collagen degradation is an important parameter to evaluate dentin caries for preventive aid.. Evaluate preventive methods against root collagen degradation by the hydroxyproline assay (HYP) and microradiography technique (MRT). METHODOLOGY: Five bovine root dentin blocks were obtained and subjected to an artificial demineralization process by acetate buffer (pH 5) to induce carious lesion formation. Samples were subjected to the following therapeutic treatments: 1) 0.12% chlorhexidine for 1 min, 2) 2% fluoride for 1 min, 3) Nd:YAG Laser (400 µm diameter optical fiber, 10 Hz frequency, 60 mJ/pulse energy, 48 J/cm2 energy density, in noncontact mode for 10 s), 4) deionized water (control) for 1 min, 5) MRT control group (without treatment and removal of collagen). Samples were exposed to degradation by a collagenase enzyme for five days. The enzyme solution was collected, by colorimetry in a spectrophotometer, from the collagen matrix for the hydroxyproline release analysis. The same samples were subjected to an additional two days of demineralization to induce the progression of mineral loss. Samples were analyzed by MRT for the visualization of their degraded areas (estimation of lesion depth and mineral loss). ANOVA was applied to compare hydroxyproline release rates. MRT data were subjected to the Kruskal-Wallis test, followed by the Dunn's test. Comparisons between the initial five-day and the subsequent two-day demineralization processes were performed by repeated t-test or Wilcoxon (p<0.05) measurements. RESULTS: The amount of HYP released from the dentin samples failed to show significant differences among the groups (p=0.09). Fluoride and chlorhexidine were able to interact with the samples, reducing the progression of dentin caries after removal of the demineralized organic matrix. CHX was the only treatment able to show significant lower lesion depth than the negative control. CONCLUSION: Chlorhexidine and fluoride were effective in reducing root caries progression.

How Water Content Can Influence the Chemomechanical Properties and Physical Degradation under Aging of Experimental Adhesives.

Objective: To evaluate the physicochemical (sorption (SOR), solubility (SOL), and degree of conversion (DC)) and mechanical (flexural strength (FS), modulus of elasticity (ME), and compressive strength (CS)) properties of adhesives with different water contents (D2O). Materials and Methods: An adhesive was formulated: 55 wt% BisGMA, 45 wt% HEMA, 0.5 wt% camphorquinone, 0.5 wt% EDMAB, and 1.0 wt% DPIHP. D2O was added into the adhesives (0 wt%, 10 wt%, and 16 wt%). DC was monitored through the FTIR. FS, ME, CS, SOR, and SOL were tested. The adhesive samples were aged in deionized water, ethanol, and acetone. Data were submitted to ANOVA and Tukey's tests (5%). Results: For DC, the 0 wt% group showed a significant reduction (68.09 ± 0.14A) compared with the 10 wt% (87.07 ± 0.81B) and 16 wt% groups (89.87 ± 0.24B); 10 wt% showed the highest FS (MPa) mean values (141.6 ± 6.71B) compared with the 0 wt% (109.4 ± 20.5A) and 16 wt% (107.8 ± 15.8A). For the CS (MPa) and ME (GPa), the 16 wt% showed the lowest mean values (98.8 ± 18.0B and 2.2 ± 0.3B, respectively) compared with the 10 wt% and 0 wt%. For the SOR, 16 wt% of water showed the highest mean values and the ethanol showed the lowest mean values of SOL regardless of water content. Conclusion: The amount of water content and the types of aging solvents significantly affect the adhesive properties.

Loss of an eye to mucormycosis following corticosteroid therapy for COVID-19.

Mucormycosis is a rare, sometimes severe fungal infection that has emerged as a possible complication of COVID-19. We report a case of a non-diabetic, apparently immunocompetent patient diagnosed with rhino-orbital-cerebral mucormycosis shortly after COVID-19 treatment with dexamethasone. The patient received optimized systemic antifungal therapy and extensive surgical treatment. So far, four months after the last hospital discharge, the patient has been in good general condition. This case is a dramatic reminder that beneficial corticosteroid therapy in general inevitably carries a risk of opportunistic infection, and corticosteroid therapy for COVID-19 risks orbital-rhinocerebral mucormycosis that clinicians should watch for with vigilance.

Universal adhesive: the effect of different simulated pulpal pressure fluids and bonding modes to dentin.

The aim of this study was to evaluate the effect of SPP with either fetal bovine serum (FBS) or deionized water (DW) on the bond strength (µTBS) of a Universal adhesive to dentin, in both etch-and-rinse (ER) and self-etch (SE) modes. The kinematic viscosity (cSt) of FBS and DW was measured at 25 °C ± 0.1 ºC. Seventy-two sound human molars were sectioned and randomly divided into three groups according to the SPP conditions: (1) Control (0 cm H2O), (2) SPP (15 cm H2O) with FBS, (3) SPP (15 cm H2O) with DW. Each group was subdivided (n = 10) based on the bonding modes: ER (37% phosphoric acid + ScothBond Universal Adhesive) or SE (ScothBond Universal Adhesive). Samples were then submitted to µTBS. Data were analyzed by Student's t test, two-way ANOVA and Tukey tests (p < 0.05). The cSt results showed that DW (23.59 ± 0.39) had significantly higher values than FBS (22.33 ± 0.06). With regard to SPP, the control group (36.1 MPa) had significantly higher values of µTBS when compared to the SPP using FBS (31.06 MPa) and SPP with DW (26.55 MPa). According to ANOVA, the bonding modes and the interaction of simulated pulpal pressure (SPP) did not statistically influence the results (p < 0.05). The presence of SPP reduced the bond strength of Universal adhesive to dentin. DW during SPP had significantly reduced bonding values when compared to FBS. Bonding strategies were not affected by SPP when evaluated in a short period of time (24 h).

Loss of an eye to mucormycosis following corticosteroid therapy for COVID-19

Mucormycosis is a rare, sometimes severe fungal infection that has emerged as a possible complication of COVID-19. We report a case of a non-diabetic, apparently immunocompetent patient diagnosed with rhino-orbital-cerebral mucormycosis shortly after COVID-19 treatment with dexamethasone. The patient received optimized systemic antifungal therapy and extensive surgical treatment. So far, four months after the last hospital discharge, the patient has been in good general condition. This case is a dramatic reminder that beneficial corticosteroid therapy in general inevitably carries a risk of opportunistic infection, and corticosteroid therapy for COVID-19 risks orbital-rhinocerebral mucormycosis that clinicians should watch for with vigilance.

Effect of fluoride, chlorhexidine or Nd:YAG on the progression of root dentin demineralization after removal of the demineralized organic matrix

Abstract Quantification of collagen degradation is an important parameter to evaluate dentin caries for preventive aid. Objectives: Evaluate preventive methods against root collagen degradation by the hydroxyproline assay (HYP) and microradiography technique (MRT). Methodology: Five bovine root dentin blocks were obtained and subjected to an artificial demineralization process by acetate buffer (pH 5) to induce carious lesion formation. Samples were subjected to the following therapeutic treatments: 1) 0.12% chlorhexidine for 1 min, 2) 2% fluoride for 1 min, 3) Nd:YAG Laser (400 μm diameter optical fiber, 10 Hz frequency, 60 mJ/pulse energy, 48 J/cm2 energy density, in noncontact mode for 10 s), 4) deionized water (control) for 1 min, 5) MRT control group (without treatment and removal of collagen). Samples were exposed to degradation by a collagenase enzyme for five days. The enzyme solution was collected, by colorimetry in a spectrophotometer, from the collagen matrix for the hydroxyproline release analysis. The same samples were subjected to an additional two days of demineralization to induce the progression of mineral loss. Samples were analyzed by MRT for the visualization of their degraded areas (estimation of lesion depth and mineral loss). ANOVA was applied to compare hydroxyproline release rates. MRT data were subjected to the Kruskal-Wallis test, followed by the Dunn's test. Comparisons between the initial five-day and the subsequent two-day demineralization processes were performed by repeated t-test or Wilcoxon (p<0.05) measurements. Results: The amount of HYP released from the dentin samples failed to show significant differences among the groups (p=0.09). Fluoride and chlorhexidine were able to interact with the samples, reducing the progression of dentin caries after removal of the demineralized organic matrix. CHX was the only treatment able to show significant lower lesion depth than the negative control. Conclusion: Chlorhexidine and fluoride were effective in reducing root caries progression.

Short-term survival in extensive craniofacial resections.

OBJECTIVES: Craniofacial resection (CFR) procedures for craniofacial tumors with cranial extension are often extensive. Although CFRs may yield good oncological results, there are concerns about high perioperative morbidity and mortality. This study aimed to determine risk factors for perioperative mortality after open CFR in terms of deaths occurring during index hospitalizations. METHODS: We conducted a retrospective analysis of CFRs conducted at a tertiary oncology hospital from May 2009 through December 2018. RESULTS: Our analysis included data from the medical records of 102 patients, the majority of whom were male (n=74, 72.5%). The mean age was 61 years (±18.3 years). Skin malignancies (n=64, 63.4%) accounted for nearly two-thirds of the treated tumors, and most of these were squamous cell carcinoma. Postoperative medical complications occurred in 33 patients (33%), and surgical complications occurred in 48 (47%). Multivariate analysis revealed the only independent risk factors for perioperative deaths to be the presence of intracranial tumor extension on preoperative imaging (hazard ratio [HR]=4.56; 95% confidence interval [CI]: 1.74-11.97; p=0.002) and the unexpected emergence of postoperative neurological dysfunction (HR=10.9; 95% CI: 2.21-54.3; p=0.003). CONCLUSIONS: In our study, factors related to tumor extension were associated with a higher risk of perioperative death.

Photochemical reactions on aerosols at West Antarctica: A molecular case-study of nitrate formation among sea salt aerosols.

Environmental implications of climate change are complex and exhibit regional variations both within and between the polar regions. The increase of solar UV radiation flux over Antarctica due to stratospheric ozone depletion creates the optimal conditions for photochemical reactions on the snow. Modeling, laboratory, and indirect field studies suggest that snowpack process release gases to the atmosphere that can react on sea salt particles in remote regions such as Antarctica, modifying aerosol composition and physical properties of aerosols. Here, we present evidence of photochemical processing in West Antarctica aerosols using microscopic and chemical speciation of individual atmospheric particles. Individual aerosol particles collected at the Brazilian module Criosfera 1 were analyzed by scanning transmission X-ray microscopy with near edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS) combined with computer-controlled scanning electron microscopy (CCSEM) with energy-dispersive X-ray (EDX) microanalysis. The displacement of chlorine relative to sodium was observed over most of the sea salt particles. Particles with a chemical composition consistent with NaCl-NO3 contributed up to 30% of atmospheric particles investigated. Overall, this study provides evidence that the snowpack and particulate nitrate photolysis should be considered in dynamic partition equilibrium in the troposphere. These findings may assist in reducing modeling uncertainties and present new insights into the aerosol chemical composition in the polar environment.

Full digital workflow in fixed adhesive dental prosthesis: Description of a clinical technique / Fluxo de trabalho digital completo em prótese fixa adesiva: descrição de uma técnica clínica

Digital dentistry has gained space in several dental specialties. It is possible to achieve excellent results with the digital workflow, which combines the efficiency of the restorative material with a greater marginal adaptation. This study aimed to report a clinical case through the digital workflow, with a faster and clinically acceptable prosthetic resolution. In this clinical case report, digital workflow allowed a faster and clinically acceptable prosthetic resolution. A 45-year-old female patient reported cementation failure of the prosthetic crown on tooth 14. As it was a vital tooth, the tooth received a total crown preparation. In the same clinical session, the patient's mouth was scanned then a capture software obtained a virtual model. After, the design software planned a digital "diagnostic wax-up", so a leucitic ceramic was chosen for the rehabilitation. The ceramic block was milled and receive stain and glaze, dispensing the prosthesis laboratory. Then, the adhesive cementation was performed with a dual-polymerized resin cement. The final crown had ideal adaptation, with no need for interproximal and occlusal adjustments, with an excellent marginal fit. Within the limitations of this study, this case report showed that the digital workflow allowed a favorable result in a shorter working time, which brought back function and aesthetics, without the need for interproximal and occlusal adjustments. (AU)

A odontologia digital vem ganhando espaço em diversas especialidades odontológicas. Com o fluxo de trabalho digital, é possível alcançar excelentes resultados na reabilitação protética, combinando a eficiência do material restaurador com a adaptação marginal proporcionada pela odontologia digital. O objetivo desse estudo foi relatar um caso clínico através do fluxo de trabalho digital, com uma resolução protética mais rápida e clinicamente aceitável. Paciente do sexo feminino, 45 anos, relatou falha de cimentação da coroa protética do dente 26. Por ser um dente vital, o dente recebeu um preparo de coroa total e os dentes foram escaneados e um software de captura obteve um modelo virtual. Posteriormente, o software de projeto planejou um "enceramento diagnóstico" digital, sendo escolhida uma cerâmica leucítica para a reabilitação. O bloco cerâmico foi fresado e recebeu acabamento, maquiagem e glaze pelo próprio dentista, dispensando um técnico laboratorial de prótese dentária. Em seguida, foi realizada cimentação adesiva definitiva. Este relato de caso mostra que, dentro das limitações desse estudo, o fluxo digital permite um resultado favorável em um menor tempo de trabalho, devolvendo a função e estética, sem necessidade de ajustes interproximais e oclusais (AU)

Amalgam allergy and Burning Mouth Syndrom: treatment and 25 years recall / Alergia ao amálgama e Síndrome da ardência bucal: tratamento e 25 anos de proservação

Background: Burning mouth syndrome (BMS) is a non-neuropathic chronic orofacial pain condition, characterized by the presence of burning/warm sensation without specific mucosal lesions. Objective: The aim of the present clinical case report is to describe the positive outcome of dental treatment of a patient with BMS and followed up for 25 years. Data Treatment: This report describes the case of a 50-year-old black woman sought treatment for burning, and persistent swelling of tong (24h/day) occurring over years. Clinical evaluation of the oral environment revealed the tongue with cracking, darkened points areas, surrounded by whitish areas. Twelve teeth presented extensive amalgam restorations. Patch testing revealed a very strong hypersensitivity to Amalgam. All amalgam restorations were substituted by composite resin restorations. Results and Conclusion: Burning sensation disappeared completely after these restorations had been changed. After 25-year follow-up period, it was observed that burning sensation has never been felt anymore. Clinical Significance: Burning mouth syndrome is a chronic orofacial pain, usually without specific mucosal lesions. The etiology is complex and multifactorial and the treatment should be made specifically for each pacient. (AU)

Introdução: A síndrome de ardência bucal (SAB) é uma condição de dor orofacial crônica não neuropática, caracterizada pela presença de sensação de queimação/calor sem lesões específicas da mucosa. Objetivo: Oobjetivo do presente relato de caso clínico é descrever a evolução positiva do tratamento odontológico de uma paciente com SAB e o retorno após 25 anos. Tratamento dos Dados: Este relato descreve o caso de uma mulher negra de 50 anos que buscou tratamento por queimadura e edema persistente da língua (24h/dia) ocorrendo ao longo dos anos. A avaliação clínica da cavidade bucal revelou a língua com áreas fissuradas e áreas com pontos escurecidos circundadas por áreas esbranquiçadas. Doze dentes apresentavam restaurações extensas de amálgama de prata. O teste de contato revelou hipersensibilidade muito forte ao amálgama de prata. Todas as restaurações de amálgama de prata foram substituidas por restaurações de resina composta. Resultados e Conclusão: A sensação de queimação desapareceu completamente após a substituição das restaurações. Após um periodo de 25 anos, observou-se que a sensação de queimação nunca foi mais relatada. Significado Clínico: a síndrome da ardência bucal é uma dor orofacial crônica, geralmente sem lesões específicas da mucosa. A etiologia é complexa e multifatorial e o tratamento deve ser feito especificamente para cada paciente.(AU)

Short-term survival in extensive craniofacial resections

OBJECTIVES: Craniofacial resection (CFR) procedures for craniofacial tumors with cranial extension are often extensive. Although CFRs may yield good oncological results, there are concerns about high perioperative morbidity and mortality. This study aimed to determine risk factors for perioperative mortality after open CFR in terms of deaths occurring during index hospitalizations. METHODS: We conducted a retrospective analysis of CFRs conducted at a tertiary oncology hospital from May 2009 through December 2018. RESULTS: Our analysis included data from the medical records of 102 patients, the majority of whom were male (n=74, 72.5%). The mean age was 61 years (±18.3 years). Skin malignancies (n=64, 63.4%) accounted for nearly two-thirds of the treated tumors, and most of these were squamous cell carcinoma. Postoperative medical complications occurred in 33 patients (33%), and surgical complications occurred in 48 (47%). Multivariate analysis revealed the only independent risk factors for perioperative deaths to be the presence of intracranial tumor extension on preoperative imaging (hazard ratio [HR]=4.56; 95% confidence interval [CI]: 1.74-11.97; p=0.002) and the unexpected emergence of postoperative neurological dysfunction (HR=10.9; 95% CI: 2.21-54.3; p=0.003). CONCLUSIONS: In our study, factors related to tumor extension were associated with a higher risk of perioperative death.

Polyphenol-enriched extract of Arrabidaea chica used as a dentin pretreatment or incorporated into a total-etching adhesive system: Effects on bonding stability and physical characterization.

The aim of this paper was to evaluate the physical properties and the long-term bond strength of a 2.5% polyphenol-enriched extract of Arrabidaea chica (AC) incorporated into both the phosphoric acid and the primer of a three-step total-etch adhesive, or into an aqueous solution as a dentin pretreatment. Fifty dentin surfaces received the treatments (n = 10): CON (control) - application of the three-step adhesive system (Adper Scotchbond Multipurpose, 3M ESPE); WAT - distilled water used as a pretreatment after dentin etching and before application of the adhesive system; ACPA - AC incorporated into the phosphoric acid; ACW - dentin pre-treatment with AC incorporated into an aqueous solution after etching; ACP - AC incorporated into the primer. Microtensile bond strength tests were performed after 24 h, 6 and 12 months of storage. Slices from the resin-dentin interface were obtained for scanning electron microscopy analysis of the hybrid layer. Degree of conversion of AC incorporated into the primer was evaluated. The particle size, polydispersity index and zeta potential of all the solutions prepared by incorporating AC (phosphoric acid, primer and distilled water) were measured by dynamic light scattering, which brought about changes after incorporation. Degree of conversion of the primer was not affected after incorporating AC. ACP showed lower microtensile bond strength values than the other groups. Bond strength decreased after 6 months of storage, stabilizing at the 12-month evaluation. Therefore, use of AC incorporated into the primer led to lower bond strength values, since AC modified the physical properties (particle size, polydispersity index and zeta potential) of the primer, but did not change the degree of conversion. Application of AC as a dentin pretreatment did not affect bond strength or the micromorphological characteristics of the hybrid layer.